Commit 7dcc6283 authored by Andrew Lunn's avatar Andrew Lunn Committed by Arnd Bergmann

ARM: Kirkwood: Convert NSA310 to use gpio-poweroff driver

Remove the C code and add a Device Tree node for gpio-poweroff.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 12131b54
...@@ -142,6 +142,11 @@ red-copy { ...@@ -142,6 +142,11 @@ red-copy {
}; };
}; };
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 16 0>;
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
...@@ -11,14 +11,11 @@ ...@@ -11,14 +11,11 @@
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/gpio.h>
#include <mach/kirkwood.h> #include <mach/kirkwood.h>
#include <linux/of.h> #include <linux/of.h>
#include "common.h" #include "common.h"
#include "mpp.h" #include "mpp.h"
#define NSA310_GPIO_POWER_OFF 48
static unsigned int nsa310_mpp_config[] __initdata = { static unsigned int nsa310_mpp_config[] __initdata = {
MPP12_GPIO, /* led esata green */ MPP12_GPIO, /* led esata green */
MPP13_GPIO, /* led esata red */ MPP13_GPIO, /* led esata red */
...@@ -43,40 +40,10 @@ static struct i2c_board_info __initdata nsa310_i2c_info[] = { ...@@ -43,40 +40,10 @@ static struct i2c_board_info __initdata nsa310_i2c_info[] = {
{ I2C_BOARD_INFO("adt7476", 0x2e) }, { I2C_BOARD_INFO("adt7476", 0x2e) },
}; };
static void nsa310_power_off(void)
{
gpio_set_value(NSA310_GPIO_POWER_OFF, 1);
}
static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags,
const char *label)
{
int err;
err = gpio_request_one(gpio, flags, label);
if (err)
pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n",
gpio, label, err);
return err;
}
static void __init nsa310_gpio_init(void)
{
int err;
err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW,
"Power Off");
if (!err)
pm_power_off = nsa310_power_off;
}
void __init nsa310_init(void) void __init nsa310_init(void)
{ {
kirkwood_mpp_conf(nsa310_mpp_config); kirkwood_mpp_conf(nsa310_mpp_config);
nsa310_gpio_init();
i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment