Commit 7e0fc16e authored by David S. Miller's avatar David S. Miller

serial/sun{core,zilog}.c: build fixes.

parent 6f0a8b1c
......@@ -13,6 +13,8 @@
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/init.h>
......@@ -212,7 +214,7 @@ int suncore_mouse_baud_detection(unsigned char ch, int is_break)
}
if (mouse_got_break) {
ctr++;
if (c == 0x87) {
if (ch == 0x87) {
/* Correct baud rate determined. */
mouse_got_break = 0;
}
......
......@@ -37,6 +37,10 @@
#include <asm/io.h>
#include <asm/irq.h>
#ifdef CONFIG_SPARC64
#include <asm/fhc.h>
#endif
#include <asm/sbus.h>
#include <linux/serial_core.h>
......@@ -92,6 +96,8 @@ struct uart_sunzilog_port {
#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
unsigned int cflag;
/* L1-A keyboard break state. */
int kbd_id;
int l1_down;
......@@ -252,8 +258,8 @@ static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs)
*
* The UART port lock must be held and local interrupts disabled.
*/
static void sunzilog_maybe_update_regs(struct zilog_channel *channel,
struct uart_sunzilog_port *up)
static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
struct zilog_channel *channel)
{
if (!ZS_REGS_HELD(up)) {
if (ZS_TX_ACTIVE(up)) {
......@@ -266,17 +272,17 @@ static void sunzilog_maybe_update_regs(struct zilog_channel *channel,
static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
{
unsigned int cur_cflag = up->port.cflag;
unsigned int cur_cflag = up->cflag;
int brg, new_baud;
up->port.cflag &= ~CBAUD;
up->port.cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
up->cflag &= ~CBAUD;
up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
brg = BPS_TO_BRG(new_baud,
(ZS_CLOCK / ZS_CLOCK_DIVISOR));
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
sunzilog_maybe_update_regs(ZILOG_CHANNEL_FROM_PORT(&up->port), up);
sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
}
static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
......@@ -288,9 +294,9 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
up->l1_down = 0;
} else if (up->kbd_id) {
up->kbd_id = 0;
} else if (ch == SUNKBD_l1) {
} else if (ch == SUNKBD_L1) {
up->l1_down = 1;
} else if (ch == (SUNKBD_l1 | SUNKBD_UP)) {
} else if (ch == (SUNKBD_L1 | SUNKBD_UP)) {
up->l1_down = 0;
} else if (ch == SUNKBD_A && up->l1_down) {
sun_do_break();
......@@ -321,7 +327,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
}
static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
struct sunzilog_channel *channel,
struct zilog_channel *channel,
struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
......@@ -389,7 +395,7 @@ static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
if (r1 & BRK_ABRT) {
r1 &= ~(PAR_ERR | CRC_ERR);
up->port.icount.break++;
up->port.icount.brk++;
if (uart_handle_break(&up->port))
goto next_char;
}
......@@ -410,7 +416,7 @@ static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto next_char;
if (up->ignore_status_mask == 0xff ||
if (up->port.ignore_status_mask == 0xff ||
(r1 & up->port.ignore_status_mask) == 0) {
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
......@@ -434,7 +440,7 @@ static void sunzilog_receive_chars(struct uart_sunzilog_port *up,
}
static void sunzilog_status_handle(struct uart_sunzilog_port *up,
struct sunzilog_channel *channel)
struct zilog_channel *channel)
{
unsigned char status;
......@@ -470,10 +476,9 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
}
static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
struct sunzilog_channel *channel)
struct zilog_channel *channel)
{
struct circ_buf *xmit = &up->port.info->xmit;
int count;
if (ZS_IS_CONS(up)) {
unsigned char status = sbus_readb(&channel->control);
......@@ -502,7 +507,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
}
if (up->port.x_char) {
sbus_writeb(sunzilog->port.x_char, &channel->data);
sbus_writeb(up->port.x_char, &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
......@@ -535,12 +540,11 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
static void sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct uart_sunzilog_port *up = dev_id;
unsigned long flags;
while (up) {
struct sunzilog_channel *channel
struct zilog_channel *channel
= ZILOG_CHANNEL_FROM_PORT(&up->port);
unsigned char r3, status;
unsigned char r3;
spin_lock(&up->port.lock);
r3 = read_zsreg(channel, 3);
......@@ -562,7 +566,7 @@ static void sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* Channel B */
up = up->next;
channel = ZILOG_CHANNEL_FROM_PORT(&up.port);
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
spin_lock(&up->port.lock);
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
......@@ -595,7 +599,7 @@ static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *p
spin_lock_irqsave(&port->lock, flags);
channel = ZILOG_CHANNEL_FROM_PORT(port);
status = sbus_read(&channel->control);
status = sbus_readb(&channel->control);
ZSDELAY();
spin_unlock_irqrestore(&port->lock, flags);
......@@ -611,7 +615,7 @@ static unsigned int sunzilog_tx_empty(struct uart_port *port)
status = sunzilog_read_channel_status(port);
if (status & Tx_BUF_EMP)
ret = TIOCSER_TEMPT;
ret = TIOCSER_TEMT;
else
ret = 0;
......@@ -641,7 +645,7 @@ static unsigned int sunzilog_get_mctrl(struct uart_port *port)
static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
struct sunzilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
unsigned char set_bits, clear_bits;
set_bits = clear_bits = 0;
......@@ -673,7 +677,7 @@ static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
struct sunzilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
unsigned char status;
up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
......@@ -706,7 +710,7 @@ static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
} else {
struct circ_buf *xmit = &port->info->xmit;
sbus_writeb(xmit->but[xmit->tail], &channel->data);
sbus_writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
ZS_WSYNC(channel);
......@@ -722,7 +726,7 @@ static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
static void sunzilog_stop_rx(struct uart_port *port)
{
struct uart_sunzilog_port *up = UART_ZILOG(port);
struct sunzilog_channel *channel;
struct zilog_channel *channel;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
......@@ -731,7 +735,7 @@ static void sunzilog_stop_rx(struct uart_port *port)
/* Disable all RX interrupts. */
up->curregs[R1] &= ~RxINT_MASK;
sunzilog_maybe_update_regs(up, up->curregs);
sunzilog_maybe_update_regs(up, channel);
spin_unlock_irqrestore(&port->lock, flags);
}
......@@ -740,7 +744,7 @@ static void sunzilog_stop_rx(struct uart_port *port)
static void sunzilog_enable_ms(struct uart_port *port)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
struct sunzilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
unsigned char new_reg;
unsigned long flags;
......@@ -761,7 +765,7 @@ static void sunzilog_enable_ms(struct uart_port *port)
static void sunzilog_break_ctl(struct uart_port *port, int break_state)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
struct sunzilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
unsigned char set_bits, clear_bits, new_reg;
unsigned long flags;
......@@ -788,7 +792,7 @@ static void sunzilog_break_ctl(struct uart_port *port, int break_state)
static int sunzilog_startup(struct uart_port *port)
{
struct uart_sunzilog_port *up = UART_ZILOG(port);
struct sunzilog_channel *channel;
struct zilog_channel *channel;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
......@@ -805,15 +809,17 @@ static int sunzilog_startup(struct uart_port *port)
*/
up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx;
up->curregs[R9] |= MIE;
sunzilog_maybe_update_regs(up, up->curregs);
sunzilog_maybe_update_regs(up, channel);
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static void sunzilog_shutdown(struct uart_port *port)
{
struct uart_sunzilog_port *up = UART_ZILOG(port);
struct sunzilog_channel *channel;
struct zilog_channel *channel;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
......@@ -828,7 +834,7 @@ static void sunzilog_shutdown(struct uart_port *port)
up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
up->curregs[R5] &= ~SND_BRK;
up->curregs[R9] &= ~MIE;
sunzilog_maybe_update_regs(up, up->curregs);
sunzilog_maybe_update_regs(up, channel);
spin_unlock_irqrestore(&port->lock, flags);
}
......@@ -894,23 +900,23 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
else
up->curregs[4] &= ~PAR_EVEN;
up->read_status_mask = Rx_OVR;
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
up->read_status_mask |= CRC_ERR | PAR_ERR;
up->port.read_status_mask |= CRC_ERR | PAR_ERR;
if (iflag & (BRKINT | PARMRK))
up->read_status_mask |= BRK_ABRT;
up->port.read_status_mask |= BRK_ABRT;
up->ignore_status_mask = 0;
up->port.ignore_status_mask = 0;
if (iflag & IGNPAR)
up->ignore_status_mask |= CRC_ERR | PAR_ERR;
up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
if (iflag & IGNBRK) {
up->ignore_status_mask |= BRK_ABRT;
up->port.ignore_status_mask |= BRK_ABRT;
if (iflag & IGNPAR)
up->ignore_status_mask |= Rx_OVR;
up->port.ignore_status_mask |= Rx_OVR;
}
if ((cflag & CREAD) == 0)
up->ignore_status_mask = 0xff;
up->port.ignore_status_mask = 0xff;
}
/* The port lock is not held. */
......@@ -924,7 +930,7 @@ sunzilog_change_speed(struct uart_port *port, unsigned int cflag,
spin_lock_irqsave(&up->port.lock, flags);
baud = (ZILOG_CLOCK / (quot * 16));
baud = (ZS_CLOCK / (quot * 16));
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
sunzilog_convert_to_zs(up, cflag, iflag, brg);
......@@ -934,7 +940,9 @@ sunzilog_change_speed(struct uart_port *port, unsigned int cflag,
else
up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
sunzilog_maybe_update_regs(ZILOG_CHANNEL_FROM_PORT(port), up);
up->cflag = cflag;
sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
spin_unlock_irqrestore(&up->port.lock, flags);
}
......@@ -988,6 +996,7 @@ static struct uart_ops sunzilog_pops = {
static struct uart_sunzilog_port *sunzilog_port_table;
static struct zilog_layout **sunzilog_chip_regs;
static int *sunzilog_nodes;
static struct uart_sunzilog_port *sunzilog_irq_chain;
static int zilog_irq = -1;
......@@ -1004,7 +1013,7 @@ static struct uart_driver sunzilog_reg = {
.minor = 64,
};
static void * __init sunzilog_alloc_one_table(unsigned long size)
static void * __init alloc_one_table(unsigned long size)
{
void *ret;
......@@ -1018,11 +1027,11 @@ static void * __init sunzilog_alloc_one_table(unsigned long size)
static void __init sunzilog_alloc_tables(void)
{
sunzilog_port_table = (struct uart_sunzilog_port *)
zs_alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
sunzilog_chip_regs = (struct zilog_layout **)
zs_alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout *));
alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout *));
sunzilog_nodes = (int *)
zs_alloc_one_table(NUM_SUNZILOG * sizeof(int));
alloc_one_table(NUM_SUNZILOG * sizeof(int));
if (sunzilog_port_table == NULL ||
sunzilog_chip_regs == NULL ||
......@@ -1039,7 +1048,7 @@ static void __init sunzilog_alloc_tables(void)
*/
static struct zilog_layout * __init get_zs_sun4u(int chip)
{
unsigned long mapped_addr;
unsigned long mapped_addr = 0xdeadbeefUL;
unsigned int sun4u_ino;
int busnode, zsnode, seen;
......@@ -1288,7 +1297,7 @@ static struct zilog_layout * __init get_zs(int chip)
#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
static void sunzilog_put_char(struct sunzilog_channel *channel, unsigned char ch)
static void sunzilog_put_char(struct zilog_channel *channel, unsigned char ch)
{
int loops = ZS_PUT_CHAR_MAX_DELAY;
......@@ -1313,16 +1322,18 @@ static void sunzilog_put_char(struct sunzilog_channel *channel, unsigned char ch
static spinlock_t sunzilog_serio_lock = SPIN_LOCK_UNLOCKED;
static void sunzilog_serio_write(struct serio *serio, unsigned char ch)
static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
{
struct uart_sunzilog_port *up = serio->driver;
unsigned long flags;
spin_lock_irqsave(&sunzilog_serio_lock, flags);
sunzilog_put_char(channel, ch);
sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
spin_lock_irqrestore(&sunzilog_serio_lock, flags);
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
return 0;
}
static int sunzilog_serio_open(struct serio *serio)
......@@ -1330,13 +1341,13 @@ static int sunzilog_serio_open(struct serio *serio)
unsigned long flags;
int ret;
spin_lock_irqsave(&sunsu_serio_lock, flags);
spin_lock_irqsave(&sunzilog_serio_lock, flags);
if (serio->private == NULL) {
serio->private = (void *) -1L;
ret = 0;
} else
ret = -EBUSY;
spin_unlock_irqrestore(&sunsu_serio_lock, flags);
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
return ret;
}
......@@ -1345,18 +1356,18 @@ static void sunzilog_serio_close(struct serio *serio)
{
unsigned long flags;
spin_lock_irqsave(&sunsu_serio_lock, flags);
spin_lock_irqsave(&sunzilog_serio_lock, flags);
serio->private = NULL;
spin_unlock_irqrestore(&sunsu_serio_lock, flags);
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
}
#endif /* CONFIG_SERIO */
static void
sunzilog_console_write(struct console *cons, const char *s, unsigned int count)
sunzilog_console_write(struct console *con, const char *s, unsigned int count)
{
struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
struct sunzilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
unsigned long flags;
int i;
......@@ -1370,12 +1381,12 @@ sunzilog_console_write(struct console *cons, const char *s, unsigned int count)
spin_unlock_irqrestore(&up->port.lock, flags);
}
static kdev_t sunzilog_console_device(struct console *cons)
static kdev_t sunzilog_console_device(struct console *con)
{
return mk_kdev(TTY_MAJOR, 64 + con->index);
}
static int __init sunzilog_console_setup(struct console *cons, char *options)
static int __init sunzilog_console_setup(struct console *con, char *options)
{
struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
unsigned long flags;
......@@ -1389,7 +1400,7 @@ static int __init sunzilog_console_setup(struct console *cons, char *options)
/* Firmware console speed is limited to 150-->38400 baud so
* this hackish cflag thing is OK.
*/
switch(cflag & CBAUD) {
switch (con->cflag & CBAUD) {
case B150: baud = 150; break;
case B300: baud = 300; break;
case B600: baud = 600; break;
......@@ -1416,8 +1427,10 @@ static int __init sunzilog_console_setup(struct console *cons, char *options)
spin_unlock_irqrestore(&up->port.lock, flags);
sunzilog_set_mctrl(up, TIOCM_DTR | TIOCM_RTS);
sunzilog_startup(up);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
sunzilog_startup(&up->port);
return 0;
}
static struct console sunzilog_console = {
......@@ -1454,14 +1467,14 @@ static void __init sunzilog_prepare(void)
if (!sunzilog_chip_regs[chip]) {
sunzilog_chip_regs[chip] = rp = get_zs(chip);
up[(chip * 2) + 0].port.membase = &rp->channelA;
up[(chip * 2) + 1].port.membase = &rp->channelB;
up[(chip * 2) + 0].port.membase = (char *) &rp->channelA;
up[(chip * 2) + 1].port.membase = (char *) &rp->channelB;
}
/* Channel A */
up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
up[(chip * 2) + 0].port.irq = zilog_irq;
up[(chip * 2) + 0].port.uartclk = ZILOG_CLOCK;
up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 0].port.fifosize = 1;
up[(chip * 2) + 0].port.ops = &sunzilog_pops;
up[(chip * 2) + 0].port.flags = 0;
......@@ -1471,7 +1484,7 @@ static void __init sunzilog_prepare(void)
/* Channel B */
up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
up[(chip * 2) + 1].port.irq = zilog_irq;
up[(chip * 2) + 1].port.uartclk = ZILOG_CLOCK;
up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
up[(chip * 2) + 1].port.fifosize = 1;
up[(chip * 2) + 1].port.ops = &sunzilog_pops;
up[(chip * 2) + 1].port.flags = 0;
......@@ -1486,11 +1499,11 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
if (channel == KEYBOARD_LINE) {
up->flags |= SUNZILOG_FLAG_CONS_KEYB;
up->port.cflag = B1200 | CS8 | CLOCAL | CREAD;
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
baud = 1200;
} else {
up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
up->port.cflag = B4800 | CS8 | CLOCAL | CREAD;
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a Zilog8530\n",
......@@ -1498,7 +1511,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
up->curregs[R15] = BRKIE;
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
sunzilog_convert_to_zs(up, up->port.cflag, 0, brg);
sunzilog_convert_to_zs(up, up->cflag, 0, brg);
#ifdef CONFIG_SERIO
memset(&up->serio, 0, sizeof(up->serio));
......@@ -1513,7 +1526,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
up->serio.type |= SERIO_SUN;
up->serio.name = "zsms";
}
up->phys = (channel == KEYBOARD_LINE ?
up->serio.phys = (channel == KEYBOARD_LINE ?
"zs/serio0" : "zs/serio1");
up->serio.write = sunzilog_serio_write;
......@@ -1524,17 +1537,17 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe
#endif
spin_unlock(&up->port.lock);
sunzilog_set_mctrl(up, TIOCM_DTR | TIOCM_RTS);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
sunzilog_startup(&up->port);
spin_lock(&up->port.lock);
}
static void __init sunzilog_init_hw(void)
{
int channel;
int i;
for (channel = 0; channel < NUM_CHANNELS; channel++) {
struct uart_sunzilog_port *up = &sunzilog_port_table[channel];
for (i = 0; i < NUM_CHANNELS; i++) {
struct uart_sunzilog_port *up = &sunzilog_port_table[i];
struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
unsigned long flags;
int baud, brg;
......@@ -1547,8 +1560,8 @@ static void __init sunzilog_init_hw(void)
(void) read_zsreg(channel, R0);
}
if (channel == KEYBOARD_LINE || channel == MOUSE_LINE) {
sunzilog_init_kbdms(up, channel);
if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
sunzilog_init_kbdms(up, i);
} else if (ZS_IS_CONS(up)) {
/* sunzilog_console_setup takes care of this */
} else {
......@@ -1564,7 +1577,7 @@ static void __init sunzilog_init_hw(void)
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRSRC | BRENAB;
sunzilog_maybe_update_regs(channel, up->curregs);
sunzilog_maybe_update_regs(up, channel);
}
spin_unlock_irqrestore(&up->port.lock, flags);
......@@ -1603,11 +1616,12 @@ static int __init sunzilog_ports_init(void)
int i;
for (i = 0; i < NUM_CHANNELS; i++) {
struct uart_sunzilog_port *up = &sunzilog_port_table[i];
if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
continue;
uart_add_one_port(&sunzilog_reg,
&sunzilog_port_table[i].port);
uart_add_one_port(&sunzilog_reg, &up->port);
}
}
......@@ -1681,11 +1695,12 @@ static void __exit sunzilog_exit(void)
int i;
for (i = 0; i < NUM_CHANNELS; i++) {
struct uart_sunzilog_port *up = &sunzilog_port_table[i];
if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
continue;
uart_remove_one_port(&sunzilog_reg,
&sunzilog_port_table[i].port);
uart_remove_one_port(&sunzilog_reg, &up->port);
}
uart_unregister_driver(&sunzilog_reg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment