Skip to content

L
linux
Commit 7e1acc8b authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson
Browse files
Options

arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms 

Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.netSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 091efd56
Show whitespace changes
Inline Side-by-side
Showing with 566 additions and 529 deletions
arch/arm64/boot/dts/qcom/ipq6018.dtsi
View file @ 7e1acc8b
......@@ -146,6 +146,32 @@ psci: psci {
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq6018";
qcom,glink-channels = "rpm_requests";
regulators {
compatible = "qcom,rpm-mp5496-regulators";
ipq6018_s2: s2 {
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1062500>;
regulator-always-on;
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -182,28 +208,6 @@ q6_region: memory@4ab00000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq6018";
qcom,glink-channels = "rpm_requests";
regulators {
compatible = "qcom,rpm-mp5496-regulators";
ipq6018_s2: s2 {
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1062500>;
regulator-always-on;
};
};
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
......
arch/arm64/boot/dts/qcom/ipq9574.dtsi
View file @ 7e1acc8b
......@@ -156,6 +156,22 @@ psci {
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq9574";
qcom,glink-channels = "rpm_requests";
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -184,18 +200,6 @@ smem@4aa00000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq9574";
qcom,glink-channels = "rpm_requests";
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
......
arch/arm64/boot/dts/qcom/msm8996.dtsi
View file @ 7e1acc8b
......@@ -448,6 +448,63 @@ psci {
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8996";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,msm8996-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp1: opp1 {
opp-level = <1>;
};
rpmpd_opp2: opp2 {
opp-level = <2>;
};
rpmpd_opp3: opp3 {
opp-level = <3>;
};
rpmpd_opp4: opp4 {
opp-level = <4>;
};
rpmpd_opp5: opp5 {
opp-level = <5>;
};
rpmpd_opp6: opp6 {
opp-level = <6>;
};
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -522,62 +579,6 @@ mdata_mem: mpss-metadata {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8996";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,msm8996-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp1: opp1 {
opp-level = <1>;
};
rpmpd_opp2: opp2 {
opp-level = <2>;
};
rpmpd_opp3: opp3 {
opp-level = <3>;
};
rpmpd_opp4: opp4 {
opp-level = <4>;
};
rpmpd_opp5: opp5 {
opp-level = <5>;
};
rpmpd_opp6: opp6 {
opp-level = <6>;
};
};
};
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
......
arch/arm64/boot/dts/qcom/msm8998.dtsi
View file @ 7e1acc8b
......@@ -321,7 +321,10 @@ psci {
method = "smc";
};
rpm-glink {
rpm: remoteproc {
compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
......@@ -390,6 +393,7 @@ rpmpd_opp_turbo_plus: opp10 {
};
};
};
};
smem {
compatible = "qcom,smem";
......
arch/arm64/boot/dts/qcom/qcm2290.dtsi
View file @ 7e1acc8b
......@@ -198,6 +198,71 @@ CLUSTER_PD: power-domain-cpu-cluster {
};
};
rpm: remoteproc {
compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-qcm2290";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,qcm2290-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -288,67 +353,6 @@ rmtfs_mem: memory@89b01000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-qcm2290";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,qcm2290-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
......
arch/arm64/boot/dts/qcom/qcs404.dtsi
View file @ 7e1acc8b
......@@ -166,58 +166,10 @@ psci {
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tz_apps_mem: memory@85900000 {
reg = <0 0x85900000 0 0x500000>;
no-map;
};
xbl_mem: memory@85e00000 {
reg = <0 0x85e00000 0 0x100000>;
no-map;
};
smem_region: memory@85f00000 {
reg = <0 0x85f00000 0 0x200000>;
no-map;
};
tz_mem: memory@86100000 {
reg = <0 0x86100000 0 0x300000>;
no-map;
};
wlan_fw_mem: memory@86400000 {
reg = <0 0x86400000 0 0x1100000>;
no-map;
};
adsp_fw_mem: memory@87500000 {
reg = <0 0x87500000 0 0x1a00000>;
no-map;
};
cdsp_fw_mem: memory@88f00000 {
reg = <0 0x88f00000 0 0x600000>;
no-map;
};
rpm: remoteproc {
compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
wlan_msa_mem: memory@89500000 {
reg = <0 0x89500000 0 0x100000>;
no-map;
};
uefi_mem: memory@9f800000 {
reg = <0 0x9f800000 0 0x800000>;
no-map;
};
};
rpm-glink {
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
......@@ -290,6 +242,58 @@ rpmpd_opp_turbo_plus: opp11 {
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tz_apps_mem: memory@85900000 {
reg = <0 0x85900000 0 0x500000>;
no-map;
};
xbl_mem: memory@85e00000 {
reg = <0 0x85e00000 0 0x100000>;
no-map;
};
smem_region: memory@85f00000 {
reg = <0 0x85f00000 0 0x200000>;
no-map;
};
tz_mem: memory@86100000 {
reg = <0 0x86100000 0 0x300000>;
no-map;
};
wlan_fw_mem: memory@86400000 {
reg = <0 0x86400000 0 0x1100000>;
no-map;
};
adsp_fw_mem: memory@87500000 {
reg = <0 0x87500000 0 0x1a00000>;
no-map;
};
cdsp_fw_mem: memory@88f00000 {
reg = <0 0x88f00000 0 0x600000>;
no-map;
};
wlan_msa_mem: memory@89500000 {
reg = <0 0x89500000 0 0x100000>;
no-map;
};
uefi_mem: memory@9f800000 {
reg = <0 0x9f800000 0 0x800000>;
no-map;
};
};
smem {
compatible = "qcom,smem";
......
arch/arm64/boot/dts/qcom/sdm630.dtsi
View file @ 7e1acc8b
......@@ -359,6 +359,74 @@ psci {
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sdm660";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sdm660-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
};
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -440,70 +508,6 @@ zap_shader_region: gpu@fed00000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sdm660";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sdm660-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
};
};
};
};
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
......
arch/arm64/boot/dts/qcom/sm6115.dtsi
View file @ 7e1acc8b
......@@ -341,6 +341,72 @@ CLUSTER_1_PD: power-domain-cpu-cluster1 {
};
};
rpm: remoteproc {
compatible = "qcom,sm6115-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6115";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sm6115-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -440,68 +506,6 @@ rmtfs_mem: memory@89b01000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6115";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sm6115-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_min_svs: opp1 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp2 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp4 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp5 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp7 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
......
arch/arm64/boot/dts/qcom/sm6125.dtsi
View file @ 7e1acc8b
......@@ -181,6 +181,78 @@ psci {
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6125";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sm6125-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_no_cpr: opp10 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
......@@ -292,74 +364,6 @@ qseecom_ta_mem: memory@13fc00000 {
};
};
rpm-glink {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6125";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,sm6125-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_no_cpr: opp10 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
......
arch/arm64/boot/dts/qcom/sm6375.dtsi
View file @ 7e1acc8b
......@@ -621,7 +621,10 @@ cmdline_region: cmdline@ffd00000 {
};
};
rpm-glink {
rpm: remoteproc {
compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
......@@ -687,6 +690,7 @@ rpmpd_opp_turbo_no_cpr: opp9 {
};
};
};
};
smp2p-adsp {
compatible = "qcom,smp2p";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7