Skip to content

L
linux
Commit 7e50b2b7 authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle
Browse files
Options

MIPS: Alchemy: remove board_init_irq() function. 

remove board_init_irq():  On all in-kernel boards it is sufficient to
initialize board interrupts in an arch_initcall by using the default
linux irq functions.

Some small irqmap.c files have been folded into board_setup files.

Run-tested on DB1200; compile-tested on all other affected boards.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 95a43796
Hide whitespace changes
Inline Side-by-side
Showing with 192 additions and 348 deletions
arch/mips/alchemy/common/irq.c
View file @ 7e50b2b7
...@@ -40,8 +40,11 @@ ...@@ -40,8 +40,11 @@
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type); static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
/* per-processor fixed function irqs */ /* per-processor fixed function irqs */
struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = { struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
} au1xxx_ic0_map[] __initdata = {
#if defined(CONFIG_SOC_AU1000) #if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
...@@ -547,7 +550,7 @@ asmlinkage void plat_irq_dispatch(void) ...@@ -547,7 +550,7 @@ asmlinkage void plat_irq_dispatch(void)
} }
/* setup edge/level and assign request 0/1 */ /* setup edge/level and assign request 0/1 */
void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count) static void __init setup_irqmap(struct au1xxx_irqmap *map, int count)
{ {
unsigned int bit, irq_nr; unsigned int bit, irq_nr;
...@@ -619,11 +622,7 @@ void __init arch_init_irq(void) ...@@ -619,11 +622,7 @@ void __init arch_init_irq(void)
/* /*
* Initialize IC0, which is fixed per processor. * Initialize IC0, which is fixed per processor.
*/ */
au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map)); setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
/* Boards can register additional (GPIO-based) IRQs.
*/
board_init_irq();
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
} }
arch/mips/alchemy/devboards/db1x00/Makefile
View file @ 7e50b2b7
...@@ -5,4 +5,4 @@ ...@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards. # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
# #
obj-y := board_setup.o irqmap.o obj-y := board_setup.o
arch/mips/alchemy/devboards/db1x00/board_setup.c
View file @ 7e50b2b7
...@@ -29,6 +29,7 @@ ...@@ -29,6 +29,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h> #include <asm/mach-db1x00/db1x00.h>
...@@ -36,6 +37,37 @@ ...@@ -36,6 +37,37 @@
#include <prom.h> #include <prom.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
const char *get_system_type(void) const char *get_system_type(void)
{ {
#ifdef CONFIG_MIPS_BOSPORUS #ifdef CONFIG_MIPS_BOSPORUS
...@@ -149,3 +181,22 @@ void __init board_setup(void) ...@@ -149,3 +181,22 @@ void __init board_setup(void)
au_sync(); au_sync();
} }
static int __init db1x00_init_irq(void)
{
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
#else
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* STSCHG1# */
#endif
return 0;
}
arch_initcall(db1x00_init_irq);
arch/mips/alchemy/devboards/db1x00/irqmap.c deleted 100644 → 0
View file @ 95a43796
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#else
{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
#endif
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/devboards/pb1000/board_setup.c
View file @ 7e50b2b7
...@@ -32,11 +32,6 @@ ...@@ -32,11 +32,6 @@
#include <prom.h> #include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void) const char *get_system_type(void)
{ {
return "Alchemy Pb1000"; return "Alchemy Pb1000";
...@@ -46,11 +41,6 @@ void board_reset(void) ...@@ -46,11 +41,6 @@ void board_reset(void)
{ {
} }
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void) void __init board_setup(void)
{ {
u32 pin_func, static_cfg0; u32 pin_func, static_cfg0;
...@@ -193,3 +183,10 @@ void __init board_setup(void) ...@@ -193,3 +183,10 @@ void __init board_setup(void)
break; break;
} }
} }
static int __init pb1000_init_irq(void)
{
set_irq_type(AU1000_GPIO_15, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1000_init_irq);
arch/mips/alchemy/devboards/pb1100/board_setup.c
View file @ 7e50b2b7
...@@ -35,14 +35,6 @@ ...@@ -35,14 +35,6 @@
#include <prom.h> #include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
};
const char *get_system_type(void) const char *get_system_type(void)
{ {
return "Alchemy Pb1100"; return "Alchemy Pb1100";
...@@ -53,11 +45,6 @@ void board_reset(void) ...@@ -53,11 +45,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0); bcsr_write(BCSR_SYSTEM, 0);
} }
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void) void __init board_setup(void)
{ {
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
...@@ -158,3 +145,14 @@ void __init board_setup(void) ...@@ -158,3 +145,14 @@ void __init board_setup(void)
au_sync(); au_sync();
} }
} }
static int __init pb1100_init_irq(void)
{
set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* PCCD# */
set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* PCCard# */
set_irq_type(AU1000_GPIO_13, IRQF_TRIGGER_LOW); /* DC_IRQ# */
return 0;
}
arch_initcall(pb1100_init_irq);
arch/mips/alchemy/devboards/pb1200/Makefile
View file @ 7e50b2b7
...@@ -2,6 +2,6 @@ ...@@ -2,6 +2,6 @@
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
# #
obj-y := board_setup.o irqmap.o platform.o obj-y := board_setup.o platform.o
EXTRA_CFLAGS += -Werror EXTRA_CFLAGS += -Werror
arch/mips/alchemy/devboards/pb1200/board_setup.c
View file @ 7e50b2b7
...@@ -25,13 +25,23 @@ ...@@ -25,13 +25,23 @@
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h> #include <asm/mach-db1x00/bcsr.h>
#include <prom.h> #ifdef CONFIG_MIPS_PB1200
#include <au1xxx.h> #include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <prom.h>
const char *get_system_type(void) const char *get_system_type(void)
{ {
...@@ -137,6 +147,38 @@ void __init board_setup(void) ...@@ -137,6 +147,38 @@ void __init board_setup(void)
au_sync(); au_sync();
} }
static int __init pb1200_init_irq(void)
{
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
return 0;
}
arch_initcall(pb1200_init_irq);
int board_au1200fb_panel(void) int board_au1200fb_panel(void)
{ {
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
......
arch/mips/alchemy/devboards/pb1200/irqmap.c deleted 100644 → 0
View file @ 95a43796
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <asm/mach-db1x00/bcsr.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
/* This is external interrupt cascade */
{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
}
arch/mips/alchemy/devboards/pb1500/board_setup.c
View file @ 7e50b2b7
...@@ -40,14 +40,6 @@ char irq_tab_alchemy[][5] __initdata = { ...@@ -40,14 +40,6 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
}; };
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void) const char *get_system_type(void)
{ {
...@@ -59,11 +51,6 @@ void board_reset(void) ...@@ -59,11 +51,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0); bcsr_write(BCSR_SYSTEM, 0);
} }
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void) void __init board_setup(void)
{ {
u32 pin_func; u32 pin_func;
...@@ -166,3 +153,15 @@ void __init board_setup(void) ...@@ -166,3 +153,15 @@ void __init board_setup(void)
au_sync(); au_sync();
} }
} }
static int __init pb1500_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1500_init_irq);
arch/mips/alchemy/devboards/pb1550/board_setup.c
View file @ 7e50b2b7
...@@ -42,11 +42,6 @@ char irq_tab_alchemy[][5] __initdata = { ...@@ -42,11 +42,6 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
}; };
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void) const char *get_system_type(void)
{ {
return "Alchemy Pb1550"; return "Alchemy Pb1550";
...@@ -57,11 +52,6 @@ void board_reset(void) ...@@ -57,11 +52,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0); bcsr_write(BCSR_SYSTEM, 0);
} }
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void) void __init board_setup(void)
{ {
u32 pin_func; u32 pin_func;
...@@ -93,3 +83,12 @@ void __init board_setup(void) ...@@ -93,3 +83,12 @@ void __init board_setup(void)
printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
} }
static int __init pb1550_init_irq(void)
{
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1550_init_irq);
arch/mips/alchemy/mtx-1/Makefile
View file @ 7e50b2b7
...@@ -6,7 +6,7 @@ ...@@ -6,7 +6,7 @@
# Makefile for 4G Systems MTX-1 board. # Makefile for 4G Systems MTX-1 board.
# #
lib-y := init.o board_setup.o irqmap.o lib-y := init.o board_setup.o
obj-y := platform.o obj-y := platform.o
EXTRA_CFLAGS += -Werror EXTRA_CFLAGS += -Werror
arch/mips/alchemy/mtx-1/board_setup.c
View file @ 7e50b2b7
...@@ -30,11 +30,23 @@ ...@@ -30,11 +30,23 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000.h>
#include <prom.h> #include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
extern int (*board_pci_idsel)(unsigned int devsel, int assert); extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert); int mtx1_pci_idsel(unsigned int devsel, int assert);
...@@ -109,3 +121,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert) ...@@ -109,3 +121,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
au_sync_udelay(1); au_sync_udelay(1);
return 1; return 1;
} }
static int __init mtx1_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(mtx1_init_irq);
arch/mips/alchemy/mtx-1/irqmap.c deleted 100644 → 0
View file @ 95a43796
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/xxs1500/Makefile
View file @ 7e50b2b7
...@@ -5,4 +5,4 @@ ...@@ -5,4 +5,4 @@
# Makefile for MyCable XXS1500 board. # Makefile for MyCable XXS1500 board.
# #
lib-y := init.o board_setup.o irqmap.o lib-y := init.o board_setup.o
arch/mips/alchemy/xxs1500/board_setup.c
View file @ 7e50b2b7
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1000.h>
...@@ -92,3 +93,23 @@ void __init board_setup(void) ...@@ -92,3 +93,23 @@ void __init board_setup(void)
#endif #endif
#endif #endif
} }
static int __init xxs1500_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_207, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* CF interrupt */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(xxs1500_init_irq);
arch/mips/alchemy/xxs1500/irqmap.c deleted 100644 → 0
View file @ 95a43796
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/include/asm/mach-au1x00/au1000.h
View file @ 7e50b2b7
...@@ -143,21 +143,6 @@ void au_sleep(void); ...@@ -143,21 +143,6 @@ void au_sleep(void);
void save_au1xxx_intctl(void); void save_au1xxx_intctl(void);
void restore_au1xxx_intctl(void); void restore_au1xxx_intctl(void);
/*
* Every board describes its IRQ mapping with this table.
*/
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
};
/* core calls this function to let boards initialize other IRQ sources */
void board_init_irq(void);
/* boards call this to register additional (GPIO) interrupts */
void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
#endif /* !defined (_LANGUAGE_ASSEMBLY) */ #endif /* !defined (_LANGUAGE_ASSEMBLY) */
/* /*
......
arch/mips/include/asm/mach-db1x00/db1200.h
View file @ 7e50b2b7
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#define __ASM_DB1200_H #define __ASM_DB1200_H
#include <linux/types.h> #include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h> #include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
......
arch/mips/include/asm/mach-pb1x00/pb1200.h
View file @ 7e50b2b7
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#define __ASM_PB1200_H #define __ASM_PB1200_H
#include <linux/types.h> #include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h> #include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7