Commit 7e70cbff authored by Lu Baolu's avatar Lu Baolu Committed by Greg Kroah-Hartman

usb: xhci: add a quirk bit for ssic port unused

Two workarounds introduced by commit b8cb91e0 ("xhci: Workaround
for PME stuck issues in Intel xhci") and commit abce329c ("xhci:
Workaround to get D3 working in Intel xHCI") share a single quirk bit
XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and
might happen on different hardwares. Need to separate them by adding a
quirk bit for the later.

Cc: stable@vger.kernel.org
Signed-off-by: default avatarLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: default avatarMathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent fa895377
...@@ -156,6 +156,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) ...@@ -156,6 +156,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) { pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK; xhci->quirks |= XHCI_PME_STUCK_QUIRK;
} }
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
}
if (pdev->vendor == PCI_VENDOR_ID_ETRON && if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_EJ168) { pdev->device == PCI_DEVICE_ID_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_RESET_ON_RESUME;
...@@ -314,29 +318,20 @@ static void xhci_pci_remove(struct pci_dev *dev) ...@@ -314,29 +318,20 @@ static void xhci_pci_remove(struct pci_dev *dev)
* SSIC PORT need to be marked as "unused" before putting xHCI * SSIC PORT need to be marked as "unused" before putting xHCI
* into D3. After D3 exit, the SSIC port need to be marked as "used". * into D3. After D3 exit, the SSIC port need to be marked as "used".
* Without this change, xHCI might not enter D3 state. * Without this change, xHCI might not enter D3 state.
* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/ */
static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
{ {
struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 val; u32 val;
void __iomem *reg; void __iomem *reg;
int i; int i;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
for (i = 0; i < SSIC_PORT_NUM; i++) { for (i = 0; i < SSIC_PORT_NUM; i++) {
reg = (void __iomem *) xhci->cap_regs + reg = (void __iomem *) xhci->cap_regs +
SSIC_PORT_CFG2 + SSIC_PORT_CFG2 +
i * SSIC_PORT_CFG2_OFFSET; i * SSIC_PORT_CFG2_OFFSET;
/* /* Notify SSIC that SSIC profile programming is not done. */
* Notify SSIC that SSIC profile programming
* is not done.
*/
val = readl(reg) & ~PROG_DONE; val = readl(reg) & ~PROG_DONE;
writel(val, reg); writel(val, reg);
...@@ -353,7 +348,17 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend) ...@@ -353,7 +348,17 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
writel(val, reg); writel(val, reg);
readl(reg); readl(reg);
} }
} }
/*
* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/
static void xhci_pme_quirk(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void __iomem *reg;
u32 val;
reg = (void __iomem *) xhci->cap_regs + 0x80a4; reg = (void __iomem *) xhci->cap_regs + 0x80a4;
val = readl(reg); val = readl(reg);
...@@ -374,7 +379,10 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) ...@@ -374,7 +379,10 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
pdev->no_d3cold = true; pdev->no_d3cold = true;
if (xhci->quirks & XHCI_PME_STUCK_QUIRK) if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd, true); xhci_pme_quirk(hcd);
if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
xhci_ssic_port_unused_quirk(hcd, true);
return xhci_suspend(xhci, do_wakeup); return xhci_suspend(xhci, do_wakeup);
} }
...@@ -406,8 +414,11 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) ...@@ -406,8 +414,11 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
if (pdev->vendor == PCI_VENDOR_ID_INTEL) if (pdev->vendor == PCI_VENDOR_ID_INTEL)
usb_enable_intel_xhci_ports(pdev); usb_enable_intel_xhci_ports(pdev);
if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
xhci_ssic_port_unused_quirk(hcd, false);
if (xhci->quirks & XHCI_PME_STUCK_QUIRK) if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
xhci_pme_quirk(hcd, false); xhci_pme_quirk(hcd);
retval = xhci_resume(xhci, hibernated); retval = xhci_resume(xhci, hibernated);
return retval; return retval;
......
...@@ -1631,6 +1631,7 @@ struct xhci_hcd { ...@@ -1631,6 +1631,7 @@ struct xhci_hcd {
#define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_BROKEN_STREAMS (1 << 19)
#define XHCI_PME_STUCK_QUIRK (1 << 20) #define XHCI_PME_STUCK_QUIRK (1 << 20)
#define XHCI_MTK_HOST (1 << 21) #define XHCI_MTK_HOST (1 << 21)
#define XHCI_SSIC_PORT_UNUSED (1 << 22)
unsigned int num_active_eps; unsigned int num_active_eps;
unsigned int limit_active_eps; unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */ /* There are two roothubs to keep track of bus suspend info for */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment