ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo

The PBA-B-01 carrier board can be equipped with either Quad or DualLite/Solo
phyFLEX i.MX6 modules (PFL-A-02).
This moves all common devices into imx6qdl-phytec-pbab01.dtsi. The SoC specific
device trees then just include the pfla01 and pbab01 dtsi files corresponding
to the SoC variant.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/boot/dts/Makefile

@@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-gw54xx.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-pbab01.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \

arch/arm/boot/dts/imx6dl-phytec-pbab01.dts

+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};

arch/arm/boot/dts/imx6q-phytec-pbab01.dts

@@ -11,40 +11,13 @@
 
 /dts-v1/;
 #include "imx6q-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
 
 / {
 	model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
 	compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
 };
 
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
 &sata {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
+        status = "okay";
 };

arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi

+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};