bnx2x: Change LED scheme for dual-media

Change LED scheme for dual-media
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x_ethtool.c

@@ -1954,10 +1954,11 @@ static int bnx2x_phys_id(struct net_device *dev, u32 data)
 
 	for (i = 0; i < (data * 2); i++) {
 		if ((i % 2) == 0)
-			bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
-				      SPEED_1000);
+			bnx2x_set_led(&bp->link_params, &bp->link_vars,
+				      LED_MODE_OPER, SPEED_1000);
 		else
-			bnx2x_set_led(&bp->link_params, LED_MODE_OFF, 0);
+			bnx2x_set_led(&bp->link_params, &bp->link_vars,
+				      LED_MODE_OFF, 0);
 
 		msleep_interruptible(500);
 		if (signal_pending(current))
@@ -1965,7 +1966,7 @@ static int bnx2x_phys_id(struct net_device *dev, u32 data)
 	}
 
 	if (bp->link_vars.link_up)
-		bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
+		bnx2x_set_led(&bp->link_params, &bp->link_vars, LED_MODE_OPER,
 			      bp->link_vars.line_speed);
 
 	return 0;

drivers/net/bnx2x/bnx2x_hsi.h

@@ -78,6 +78,8 @@ struct shared_hw_cfg {					 /* NVRAM Offset */
 #define SHARED_HW_CFG_LED_PHY11 		    0x000b0000
 #define SHARED_HW_CFG_LED_MAC4			    0x000c0000
 #define SHARED_HW_CFG_LED_PHY8			    0x000d0000
+#define SHARED_HW_CFG_LED_EXTPHY1		    0x000e0000
+
 
 #define SHARED_HW_CFG_AN_ENABLE_MASK		    0x3f000000
 #define SHARED_HW_CFG_AN_ENABLE_SHIFT		    24

drivers/net/bnx2x/bnx2x_link.h

@@ -296,9 +296,12 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
    Basically, the CLC takes care of the led for the link, but in case one needs
    to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
-u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed);
+u8 bnx2x_set_led(struct link_params *params, struct link_vars *vars,
+		 u8 mode, u32 speed);
 #define LED_MODE_OFF			0
+#define LED_MODE_ON			1
 #define LED_MODE_OPER			2
+#define LED_MODE_FRONT_PANEL_OFF	3
 
 u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value);
 

drivers/net/bnx2x/bnx2x_reg.h

@@ -5161,8 +5161,11 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_8481_LED2_MASK			0xa82f
 #define MDIO_PMA_REG_8481_LED3_MASK			0xa832
 #define MDIO_PMA_REG_8481_LED3_BLINK			0xa834
+#define MDIO_PMA_REG_8481_LED5_MASK			0xa838
 #define MDIO_PMA_REG_8481_SIGNAL_MASK			0xa835
 #define MDIO_PMA_REG_8481_LINK_SIGNAL			0xa83b
+#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK	0x800
+#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11
 
 
 #define MDIO_WIS_DEVAD			0x2