dt-bindings: iio: adc: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema.  This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml

@@ -52,8 +52,6 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
@@ -106,7 +104,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml

@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml

@@ -28,8 +28,6 @@ properties:
     description: IRQ line for the ADC
     maxItems: 1
 
-  spi-max-frequency: true
-
   adi,voltage-alert-last-chan:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -55,7 +53,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml

@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -65,7 +63,10 @@ patternProperties:
 
     additionalProperties: true
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml

@@ -24,13 +24,15 @@ properties:
 
   vref-supply: true
   vdd-supply: true
-  spi-max-frequency: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml

@@ -66,8 +66,6 @@ properties:
       to the other supplies. Needed to be able to establish channel scaling
       unless there is also an internal reference available (e.g. ad7091r)
 
-  spi-max-frequency: true
-
   adi,conversion-start-gpios:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
@@ -76,9 +74,9 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -158,6 +156,8 @@ allOf:
       properties:
         adi,conversion-start-gpios: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -32,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   avcc-supply: true
 
   interrupts:
@@ -105,7 +103,10 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml

@@ -50,8 +50,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpol: true
 
   spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
       - reg
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml

@@ -42,13 +42,14 @@ properties:
   '#size-cells':
     const: 0
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml

@@ -49,8 +49,6 @@ properties:
     default: 4096000
 
 
-  spi-max-frequency: true
-
   '#io-channel-cells':
     const: 1
 
@@ -64,7 +62,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml

@@ -24,8 +24,6 @@ properties:
       GPIO used for controlling the reset pin
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -33,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -22,15 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
-
 required:
   - compatible
   - vref-supply
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml

@@ -45,7 +45,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml

@@ -26,13 +26,16 @@ properties:
     minimum: 100000
     maximum: 4800000
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {

Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml

@@ -28,23 +28,25 @@ properties:
   vref-supply:
     description: External reference, needed to establish input scaling
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: maxim,max1118
-then:
-  required:
-    - vref-supply
-else:
-  properties:
-    vref-supply: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml

@@ -39,15 +39,16 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml

@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -51,7 +50,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml

@@ -51,7 +51,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml

@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml

@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml

@@ -19,7 +19,6 @@ properties:
 
   reg: true
   vref-supply: true
-  spi-max-frequency: true
   "#io-channel-cells":
     const: 1
 
@@ -28,7 +27,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml

@@ -31,8 +31,6 @@ properties:
     maxItems: 1
     description: Conversion clock input.
 
-  spi-max-frequency: true
-
   vref-p-supply:
     description: The regulator supply for positive analog voltage reference
 
@@ -62,7 +60,10 @@ required:
   - clocks
   - vref-p-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml

@@ -27,8 +27,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -39,7 +37,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml

@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
 
   "#io-channel-cells":
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml

@@ -18,8 +18,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   reset-gpios:
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml

@@ -28,8 +28,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   clocks:
@@ -120,7 +118,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml

@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: Supply the 2.5V or 5V reference voltage
 
@@ -32,7 +30,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml

@@ -25,13 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml

@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -33,7 +31,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml

@@ -23,8 +23,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -59,7 +57,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |