Skip to content

L
linux
Commit 8013d1d3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC fixes from Arnd Bergmann:

 - A fix for a regression caused by the previous set of bugfixes
   changing tegra and at91 pinctrl properties.

   More work is needed to figure out what this should actually be, but a
   revert makes it work for the moment.

 - Defconfig regression fixes for tegra after renamed symbols

 - Build-time warning and static checker fixes for imx, op-tee, sunxi,
   meson, at91, and omap

 - More at91 DT fixes for audio, regulator and spi nodes

 - A regression fix for Renesas Hyperflash memory probe

 - A stability fix for amlogic boards, modifying the allowed cpufreq
   states

 - Multiple fixes for system suspend on omap2+

 - DT fixes for various i.MX bugs

 - A probe error fix for imx6ull-colibri MMC

 - A MAINTAINERS file entry for samsung bug reports

* tag 'soc-fixes-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  Revert "arm: dts: at91: Fix boolean properties with values"
  bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
  Revert "arm64: dts: tegra: Fix boolean properties with values"
  arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
  ARM: dts: imx6ull-colibri: fix vqmmc regulator
  MAINTAINERS: add Bug entry for Samsung and memory controller drivers
  memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
  ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
  ARM: dts: am3517-evm: Fix misc pinmuxing
  ARM: dts: am33xx-l4: Add missing touchscreen clock properties
  ARM: dts: Fix mmc order for omap3-gta04
  ARM: dts: at91: fix pinctrl phandles
  ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name
  ARM: dts: at91: Describe regulators on at91sam9g20ek
  ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek
  ARM: dts: at91: Fix boolean properties with values
  ARM: dts: at91: use generic node name for dataflash
  ARM: dts: at91: align SPI NOR node name with dtschema
  ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines
  ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines
  ...
parents c0e6265e adee8aa2
Hide whitespace changes
Inline Side-by-side
Showing with 311 additions and 228 deletions
Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
View file @ 8013d1d3
......@@ -54,7 +54,7 @@ flexcom@f8034000 {
clock-names = "spi_clk";
atmel,fifo-size = <32>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at25f512b";
reg = <0>;
spi-max-frequency = <20000000>;
......
MAINTAINERS
View file @ 8013d1d3
......@@ -2644,6 +2644,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
......@@ -11973,6 +11974,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
F: drivers/power/supply/max14577_charger.c
......@@ -11984,6 +11986,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/*/maxim,max14577.yaml
F: Documentation/devicetree/bindings/*/maxim,max77686.yaml
F: Documentation/devicetree/bindings/*/maxim,max77693.yaml
......@@ -12677,6 +12680,7 @@ MEMORY CONTROLLER DRIVERS
M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
L: linux-kernel@vger.kernel.org
S: Maintained
B: mailto:krzysztof.kozlowski@linaro.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl.git
F: Documentation/devicetree/bindings/memory-controllers/
F: drivers/memory/
......@@ -15611,6 +15615,7 @@ L: linux-samsung-soc@vger.kernel.org
S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
B: mailto:linux-samsung-soc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
F: drivers/pinctrl/samsung/
......@@ -17327,6 +17332,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/sound/samsung*
F: sound/soc/samsung/
......@@ -17371,6 +17377,7 @@ M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
B: mailto:linux-samsung-soc@vger.kernel.org
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
......
arch/arm/boot/dts/am33xx-l4.dtsi
View file @ 8013d1d3
......@@ -263,6 +263,8 @@ tscadc: tscadc@0 {
compatible = "ti,am3359-tscadc";
reg = <0x0 0x1000>;
interrupts = <16>;
clocks = <&adc_tsc_fck>;
clock-names = "fck";
status = "disabled";
dmas = <&edma 53 0>, <&edma 57 0>;
dma-names = "fifo0", "fifo1";
......
arch/arm/boot/dts/am3517-evm.dts
View file @ 8013d1d3
......@@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
......@@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy {
};
&davinci_emac {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ethernet_pins>;
status = "okay";
};
&davinci_mdio {
......@@ -193,6 +197,8 @@ dpi_out: endpoint {
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
......@@ -205,6 +211,8 @@ tca6416: gpio@21 {
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
......@@ -223,6 +231,8 @@ &mmc3 {
};
&usbhshost {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
......@@ -231,8 +241,35 @@ &usbhsehci {
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_rst_pins>;
ethernet_pins: pinmux_ethernet_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
>;
};
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
......@@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
......
arch/arm/boot/dts/am3517-som.dtsi
View file @ 8013d1d3
......@@ -69,6 +69,8 @@ nand@0,0 {
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
......@@ -179,6 +181,13 @@ bluetooth {
&omap3_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
>;
};
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
......
arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
View file @ 8013d1d3
......@@ -44,7 +44,7 @@ &spi0 {
status = "okay";
/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
spi-flash@0 {
flash@0 {
compatible = "mxicy,mx25u4035", "jedec,spi-nor";
spi-max-frequency = <33000000>;
reg = <0>;
......
arch/arm/boot/dts/at91-kizbox3-hs.dts
View file @ 8013d1d3
......@@ -225,7 +225,7 @@ pinctrl_pio_zbe_rst: gpio_zbe_rst {
pinctrl_pio_io_reset: gpio_io_reset {
pinmux = <PIN_PB30__GPIO>;
bias-disable;
drive-open-drain;
drive-open-drain = <1>;
output-low;
};
pinctrl_pio_input: gpio_input {
......
arch/arm/boot/dts/at91-kizbox3_common.dtsi
View file @ 8013d1d3
......@@ -211,7 +211,7 @@ pinctrl_flx4_default: flx4_i2c6_default {
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
<PIN_PD13__FLEXCOM4_IO1>; //CLK
bias-disable;
drive-open-drain;
drive-open-drain = <1>;
};
pinctrl_pwm0 {
......
arch/arm/boot/dts/at91-q5xr5.dts
View file @ 8013d1d3
......@@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
......
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
View file @ 8013d1d3
......@@ -214,7 +214,7 @@ &qspi1 {
pinctrl-0 = <&pinctrl_qspi1_default>;
status = "disabled";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
......
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
View file @ 8013d1d3
......@@ -191,7 +191,7 @@ &pwm0 {
&qspi1 {
status = "okay";
qspi1_flash: spi_flash@0 {
qspi1_flash: flash@0 {
status = "okay";
};
};
......
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View file @ 8013d1d3
......@@ -137,7 +137,7 @@ spi0: spi@f8000000 {
pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
reg = <0>;
spi-max-frequency = <50000000>;
......
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View file @ 8013d1d3
......@@ -57,8 +57,8 @@ slot@0 {
};
spi0: spi@f0004000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi0_cs>;
cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
status = "okay";
};
......@@ -171,8 +171,8 @@ slot@0 {
};
spi1: spi@f8008000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioC 25 0>;
status = "okay";
};
......
arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
View file @ 8013d1d3
......@@ -49,7 +49,7 @@ spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View file @ 8013d1d3
......@@ -81,8 +81,8 @@ usart4: serial@fc010000 {
};
spi1: spi@fc018000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_cs>;
pinctrl-names = "default", "cs";
pinctrl-1 = <&pinctrl_spi1_cs>;
cs-gpios = <&pioB 21 0>;
status = "okay";
};
......@@ -140,7 +140,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
atmel,pins =
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
};
pinctrl_spi0_cs: spi0_cs_default {
pinctrl_spi1_cs: spi1_cs_default {
atmel,pins =
<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
......
arch/arm/boot/dts/at91-sama5d4ek.dts
View file @ 8013d1d3
......@@ -65,7 +65,7 @@ ssc0: ssc@f8008000 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/at91-sama7g5ek.dts
View file @ 8013d1d3
......@@ -495,7 +495,7 @@ pinctrl_flx0_default: flx0_default {
pinctrl_flx3_default: flx3_default {
pinmux = <PIN_PD16__FLEXCOM3_IO0>,
<PIN_PD17__FLEXCOM3_IO1>;
bias-disable;
bias-pull-up;
};
pinctrl_flx4_default: flx4_default {
......@@ -655,7 +655,7 @@ pinctrl_qspi: qspi {
<PIN_PB21__QSPI0_INT>;
bias-disable;
slew-rate = <0>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>;
atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
};
pinctrl_sdmmc0_default: sdmmc0_default {
......
arch/arm/boot/dts/at91-vinco.dts
View file @ 8013d1d3
......@@ -59,7 +59,7 @@ slot@0 {
spi0: spi@f8010000 {
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
status = "okay";
m25p80@0 {
flash@0 {
compatible = "n25q32b", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/at91rm9200ek.dts
View file @ 8013d1d3
......@@ -73,7 +73,7 @@ &pinctrl_uart1_dcd
spi0: spi@fffe0000 {
status = "okay";
cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;
......@@ -94,7 +94,7 @@ usb0: ohci@300000 {
status = "okay";
};
nor_flash@10000000 {
flash@10000000 {
compatible = "cfi-flash";
reg = <0x10000000 0x800000>;
linux,mtd-name = "physmap-flash.0";
......
arch/arm/boot/dts/at91sam9260ek.dts
View file @ 8013d1d3
......@@ -92,7 +92,7 @@ macb0: ethernet@fffc4000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
......
arch/arm/boot/dts/at91sam9261ek.dts
View file @ 8013d1d3
......@@ -145,7 +145,7 @@ spi0: spi@fffc8000 {
cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;
......
arch/arm/boot/dts/at91sam9263ek.dts
View file @ 8013d1d3
......@@ -95,7 +95,7 @@ pinctrl_board_mmc0: mmc0-board {
spi0: spi@fffa4000 {
status = "okay";
cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/at91sam9g20ek_common.dtsi
View file @ 8013d1d3
......@@ -110,7 +110,7 @@ ssc0: ssc@fffbc000 {
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
mtd_dataflash@1 {
flash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
......@@ -214,11 +214,23 @@ i2c-gpio-0 {
24c512@50 {
compatible = "atmel,24c512";
reg = <0x50>;
vcc-supply = <&reg_3v3>;
};
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
/* PCK0 at 12MHz */
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <12000000>;
HPVDD-supply = <&vcc_dac>;
AVDD-supply = <&vcc_dac>;
DCVDD-supply = <&reg_3v3>;
DBVDD-supply = <&reg_3v3>;
};
};
......@@ -254,4 +266,35 @@ sound {
atmel,ssc-controller = <&ssc0>;
atmel,audio-codec = <&wm8731>;
};
reg_5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "3V3";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_1v: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "1V";
vin-supply = <&reg_5v>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vcc_dac: fixedregulator3 {
compatible = "regulator-fixed";
regulator-name = "VCC_DAC";
vin-supply = <&reg_3v3>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
arch/arm/boot/dts/at91sam9m10g45ek.dts
View file @ 8013d1d3
......@@ -167,7 +167,7 @@ pinctrl_pwm_leds: pwm-led {
spi0: spi@fffa4000{
status = "okay";
cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <13000000>;
reg = <0>;
......
arch/arm/boot/dts/at91sam9n12ek.dts
View file @ 8013d1d3
......@@ -119,7 +119,7 @@ pinctrl_usb1_vbus_sense: usb1_vbus_sense {
spi0: spi@f0000000 {
status = "okay";
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/at91sam9rlek.dts
View file @ 8013d1d3
......@@ -180,7 +180,7 @@ usb0: gadget@fffd4000 {
spi0: spi@fffcc000 {
status = "okay";
cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <15000000>;
reg = <0>;
......
arch/arm/boot/dts/at91sam9x5ek.dtsi
View file @ 8013d1d3
......@@ -125,7 +125,7 @@ &spi0 {
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
status = "disabled"; /* conflicts with mmc1 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/dra7-l4.dtsi
View file @ 8013d1d3
......@@ -4188,11 +4188,11 @@ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
<SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
......
arch/arm/boot/dts/imx6qdl-apalis.dtsi
View file @ 8013d1d3
......@@ -286,6 +286,8 @@ vgen6_reg: vgen6 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
......@@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
......@@ -811,6 +811,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
pinctrl_sgtl5000: sgtl5000grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
......
arch/arm/boot/dts/imx6ull-colibri.dtsi
View file @ 8013d1d3
......@@ -37,7 +37,7 @@ reg_module_3v3_avdd: regulator-module-3v3-avdd {
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;
......
arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
View file @ 8013d1d3
......@@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
View file @ 8013d1d3
......@@ -11,3 +11,18 @@ / {
model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
arch/arm/boot/dts/logicpd-som-lv.dtsi
View file @ 8013d1d3
......@@ -265,21 +265,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
};
};
&omap3_pmx_core2 {
pinctrl-names = "default";
pinctrl-0 = <&hsusb2_2_pins>;
hsusb2_2_pins: pinmux_hsusb2_2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
>;
};
};
&uart2 {
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
......
arch/arm/boot/dts/omap3-gta04.dtsi
View file @ 8013d1d3
......@@ -31,6 +31,8 @@ chosen {
aliases {
display0 = &lcd;
display1 = &tv0;
/delete-property/ mmc2;
/delete-property/ mmc3;
};
ldo_3v3: fixedregulator {
......
arch/arm/boot/dts/sama5d3xmb.dtsi
View file @ 8013d1d3
......@@ -26,7 +26,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
View file @ 8013d1d3
......@@ -25,7 +25,7 @@ slot@0 {
spi0: spi@f0004000 {
dmas = <0>, <0>; /* Do not use DMA for spi0 */
m25p80@0 {
flash@0 {
compatible = "atmel,at25df321a";
spi-max-frequency = <50000000>;
reg = <0>;
......
arch/arm/boot/dts/sama7g5.dtsi
View file @ 8013d1d3
......@@ -601,9 +601,9 @@ i2c1: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
<&dma0 AT91_XDMAC_DT_PERID(8)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
<&dma0 AT91_XDMAC_DT_PERID(7)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
......@@ -786,9 +786,9 @@ i2c8: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
<&dma0 AT91_XDMAC_DT_PERID(22)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
<&dma0 AT91_XDMAC_DT_PERID(21)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
......@@ -810,9 +810,9 @@ i2c9: i2c@600 {
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
atmel,fifo-size = <32>;
dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
<&dma0 AT91_XDMAC_DT_PERID(24)>;
dma-names = "rx", "tx";
dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
<&dma0 AT91_XDMAC_DT_PERID(23)>;
dma-names = "tx", "rx";
status = "disabled";
};
};
......
arch/arm/boot/dts/usb_a9263.dts
View file @ 8013d1d3
......@@ -60,7 +60,7 @@ usb1: gadget@fff78000 {
spi0: spi@fffa4000 {
cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
status = "okay";
mtd_dataflash@0 {
flash@0 {
compatible = "atmel,at45", "atmel,dataflash";
reg = <0>;
spi-max-frequency = <15000000>;
......
arch/arm/configs/multi_v7_defconfig
View file @ 8013d1d3
......@@ -673,6 +673,7 @@ CONFIG_VIDEO_STI_DELTA=m
CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_JPU=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_VIDEO_TEGRA_VDE=m
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_ADV7180=m
......
arch/arm/configs/tegra_defconfig
View file @ 8013d1d3
......@@ -286,7 +286,8 @@ CONFIG_SERIO_NVEC_PS2=y
CONFIG_NVEC_POWER=y
CONFIG_NVEC_PAZ00=y
CONFIG_STAGING_MEDIA=y
CONFIG_TEGRA_VDE=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_TEGRA_VDE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=m
......
arch/arm/mach-omap2/omap4-common.c
View file @ 8013d1d3
......@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
gic_dist_base_addr = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!gic_dist_base_addr);
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
twd_base = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!twd_base);
skip_errata_init:
......
arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
View file @ 8013d1d3
......@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <761000>;
......@@ -71,26 +51,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
......
arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
View file @ 8013d1d3
......@@ -11,26 +11,6 @@ cpu_opp_table_0: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <731000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <731000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <731000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <731000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
......@@ -76,26 +56,6 @@ cpub_opp_table_1: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <751000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <751000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <751000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <667000000>;
opp-microvolt = <751000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <771000>;
......
arch/arm64/boot/dts/amlogic/meson-s4.dtsi
View file @ 8013d1d3
......@@ -13,28 +13,28 @@ cpus {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35","arm,armv8";
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
};
......
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
View file @ 8013d1d3
......@@ -437,6 +437,7 @@ &gpio {
"",
"eMMC_RST#", /* BOOT_12 */
"eMMC_DS", /* BOOT_13 */
"", "",
/* GPIOC */
"SD_D0_B", /* GPIOC_0 */
"SD_D1_B", /* GPIOC_1 */
......
arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
View file @ 8013d1d3
......@@ -95,26 +95,6 @@ cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <730000>;
};
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
opp-microvolt = <730000>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <730000>;
};
opp-667000000 {
opp-hz = /bits/ 64 <666666666>;
opp-microvolt = <750000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <770000>;
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
View file @ 8013d1d3
......@@ -146,12 +146,14 @@ &uart3 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
status = "okay";
};
......@@ -215,7 +217,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
View file @ 8013d1d3
......@@ -211,12 +211,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
......@@ -309,7 +311,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
View file @ 8013d1d3
......@@ -238,12 +238,14 @@ &uart4 {
&usbotg1 {
dr_mode = "otg";
over-current-active-low;
vbus-supply = <&reg_usb_otg1_vbus>;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_usb_otg2_vbus>;
status = "okay";
};
......@@ -358,7 +360,7 @@ pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6
>;
};
......
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
View file @ 8013d1d3
......@@ -59,6 +59,10 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";
......
arch/arm64/boot/dts/freescale/imx8mn.dtsi
View file @ 8013d1d3
......@@ -293,7 +293,7 @@ spba2: spba-bus@30000000 {
ranges;
sai2: sai@30020000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30020000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
......@@ -307,7 +307,7 @@ sai2: sai@30020000 {
};
sai3: sai@30030000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
......@@ -321,7 +321,7 @@ sai3: sai@30030000 {
};
sai5: sai@30050000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
......@@ -337,7 +337,7 @@ sai5: sai@30050000 {
};
sai6: sai@30060000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x30060000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
......@@ -394,7 +394,7 @@ spdif1: spdif@30090000 {
};
sai7: sai@300b0000 {
compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
reg = <0x300b0000 0x10000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
......
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
View file @ 8013d1d3
......@@ -253,7 +253,7 @@ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <4>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
......
arch/arm64/boot/dts/freescale/imx8qm.dtsi
View file @ 8013d1d3
......@@ -196,7 +196,7 @@ pd: imx8qx-pd {
};
clk: clock-controller {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
#clock-cells = <2>;
};
......
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
View file @ 8013d1d3
......@@ -262,25 +262,25 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio5 {
pins = "gpio5";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
View file @ 8013d1d3
......@@ -462,25 +462,25 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio5 {
pins = "gpio5";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
View file @ 8013d1d3
......@@ -174,19 +174,19 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
View file @ 8013d1d3
......@@ -148,19 +148,19 @@ gpio3 {
gpio4 {
pins = "gpio4";
function = "32k-out1";
drive-push-pull;
drive-push-pull = <1>;
};
gpio6 {
pins = "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio7 {
pins = "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <0>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
View file @ 8013d1d3
......@@ -59,7 +59,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <7>;
maxim,active-fps-power-down-slot = <0>;
......@@ -68,7 +68,7 @@ gpio1 {
gpio2_3 {
pins = "gpio2", "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
......@@ -80,7 +80,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
View file @ 8013d1d3
......@@ -1351,7 +1351,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <7>;
maxim,active-fps-power-down-slot = <0>;
......@@ -1360,14 +1360,14 @@ gpio1 {
gpio2 {
pins = "gpio2";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
};
......@@ -1379,7 +1379,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
View file @ 8013d1d3
......@@ -195,7 +195,7 @@ gpio0 {
gpio1 {
pins = "gpio1";
function = "fps-out";
drive-push-pull;
drive-push-pull = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
maxim,active-fps-power-up-slot = <0>;
maxim,active-fps-power-down-slot = <7>;
......@@ -204,7 +204,7 @@ gpio1 {
gpio2 {
pins = "gpio2";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <0>;
maxim,active-fps-power-down-slot = <7>;
......@@ -213,7 +213,7 @@ gpio2 {
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <4>;
maxim,active-fps-power-down-slot = <3>;
......@@ -227,7 +227,7 @@ gpio4 {
gpio5_6_7 {
pins = "gpio5", "gpio6", "gpio7";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
};
......
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
View file @ 8013d1d3
......@@ -1386,7 +1386,7 @@ gpio0_1_2_7 {
gpio3 {
pins = "gpio3";
function = "fps-out";
drive-open-drain;
drive-open-drain = <1>;
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
maxim,active-fps-power-up-slot = <4>;
maxim,active-fps-power-down-slot = <2>;
......@@ -1395,7 +1395,7 @@ gpio3 {
gpio5_6 {
pins = "gpio5", "gpio6";
function = "gpio";
drive-push-pull;
drive-push-pull = <1>;
};
gpio4 {
......
drivers/bus/imx-weim.c
View file @ 8013d1d3
......@@ -352,8 +352,7 @@ static int of_weim_notify(struct notifier_block *nb, unsigned long action,
pdev = of_find_device_by_node(rd->dn);
if (!pdev) {
dev_err(&pdev->dev,
"Could not find platform device for '%pOF'\n",
pr_err("Could not find platform device for '%pOF'\n",
rd->dn);
ret = notifier_from_errno(-EINVAL);
......@@ -370,7 +369,7 @@ static int of_weim_notify(struct notifier_block *nb, unsigned long action,
return ret;
}
struct notifier_block weim_of_notifier = {
static struct notifier_block weim_of_notifier = {
.notifier_call = of_weim_notify,
};
#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
......
drivers/bus/sunxi-rsb.c
View file @ 8013d1d3
......@@ -227,6 +227,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
return rdev;
err_device_add:
put_device(&rdev->dev);
......
drivers/bus/ti-sysc.c
View file @ 8013d1d3
......@@ -3232,13 +3232,27 @@ static int sysc_check_disabled_devices(struct sysc *ddata)
*/
static int sysc_check_active_timer(struct sysc *ddata)
{
int error;
if (ddata->cap->type != TI_SYSC_OMAP2_TIMER &&
ddata->cap->type != TI_SYSC_OMAP4_TIMER)
return 0;
/*
* Quirk for omap3 beagleboard revision A to B4 to use gpt12.
* Revision C and later are fixed with commit 23885389dbbb ("ARM:
* dts: Fix timer regression for beagleboard revision c"). This all
* can be dropped if we stop supporting old beagleboard revisions
* A to B4 at some point.
*/
if (sysc_soc->soc == SOC_3430)
error = -ENXIO;
else
error = -EBUSY;
if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) &&
(ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE))
return -ENXIO;
return error;
return 0;
}
......
drivers/memory/renesas-rpc-if.c
View file @ 8013d1d3
......@@ -164,25 +164,39 @@ static const struct regmap_access_table rpcif_volatile_table = {
/*
* Custom accessor functions to ensure SMRDR0 and SMWDR0 are always accessed
* with proper width. Requires SMENR_SPIDE to be correctly set before!
* Custom accessor functions to ensure SM[RW]DR[01] are always accessed with
* proper width. Requires rpcif.xfer_size to be correctly set before!
*/
static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct rpcif *rpc = context;
if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
if (spide == 0x8) {
switch (reg) {
case RPCIF_SMRDR0:
case RPCIF_SMWDR0:
switch (rpc->xfer_size) {
case 1:
*val = readb(rpc->base + reg);
return 0;
} else if (spide == 0xC) {
case 2:
*val = readw(rpc->base + reg);
return 0;
} else if (spide != 0xF) {
case 4:
case 8:
*val = readl(rpc->base + reg);
return 0;
default:
return -EILSEQ;
}
case RPCIF_SMRDR1:
case RPCIF_SMWDR1:
if (rpc->xfer_size != 8)
return -EILSEQ;
break;
}
*val = readl(rpc->base + reg);
......@@ -193,18 +207,34 @@ static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct rpcif *rpc = context;
if (reg == RPCIF_SMRDR0 || reg == RPCIF_SMWDR0) {
u32 spide = readl(rpc->base + RPCIF_SMENR) & RPCIF_SMENR_SPIDE(0xF);
if (spide == 0x8) {
switch (reg) {
case RPCIF_SMWDR0:
switch (rpc->xfer_size) {
case 1:
writeb(val, rpc->base + reg);
return 0;
} else if (spide == 0xC) {
case 2:
writew(val, rpc->base + reg);
return 0;
} else if (spide != 0xF) {
case 4:
case 8:
writel(val, rpc->base + reg);
return 0;
default:
return -EILSEQ;
}
case RPCIF_SMWDR1:
if (rpc->xfer_size != 8)
return -EILSEQ;
break;
case RPCIF_SMRDR0:
case RPCIF_SMRDR1:
return -EPERM;
}
writel(val, rpc->base + reg);
......@@ -469,6 +499,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
smenr |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes));
regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
rpc->xfer_size = nbytes;
memcpy(data, rpc->buffer + pos, nbytes);
if (nbytes == 8) {
......@@ -533,6 +564,7 @@ int rpcif_manual_xfer(struct rpcif *rpc)
regmap_write(rpc->regmap, RPCIF_SMENR, smenr);
regmap_write(rpc->regmap, RPCIF_SMCR,
rpc->smcr | RPCIF_SMCR_SPIE);
rpc->xfer_size = nbytes;
ret = wait_msg_xfer_end(rpc);
if (ret)
goto err_out;
......
drivers/soc/imx/imx8m-blk-ctrl.c
View file @ 8013d1d3
......@@ -50,7 +50,7 @@ struct imx8m_blk_ctrl_domain_data {
u32 mipi_phy_rst_mask;
};
#define DOMAIN_MAX_CLKS 3
#define DOMAIN_MAX_CLKS 4
struct imx8m_blk_ctrl_domain {
struct generic_pm_domain genpd;
......
drivers/tee/optee/ffa_abi.c
View file @ 8013d1d3
......@@ -865,6 +865,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
optee_supp_uninit(&optee->supp);
mutex_destroy(&optee->call_queue.mutex);
mutex_destroy(&optee->ffa.mutex);
err_unreg_supp_teedev:
tee_device_unregister(optee->supp_teedev);
err_unreg_teedev:
......
include/memory/renesas-rpc-if.h
View file @ 8013d1d3
......@@ -72,6 +72,7 @@ struct rpcif {
enum rpcif_type type;
enum rpcif_data_dir dir;
u8 bus_size;
u8 xfer_size;
void *buffer;
u32 xferlen;
u32 smcr;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7