fbdev: omap: avoid using mach/*.h files

All the headers we actually need are now in include/linux/soc,
so use those versions instead and allow compile-testing on
other architectures.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/video/backlight/Kconfig

@@ -211,8 +211,8 @@ config BACKLIGHT_LOCOMO
 
 config BACKLIGHT_OMAP1
 	tristate "OMAP1 PWL-based LCD Backlight"
-	depends on ARCH_OMAP1
-	default y
+	depends on ARCH_OMAP1 || COMPILE_TEST
+	default ARCH_OMAP1
 	help
 	  This driver controls the LCD backlight level and power for
 	  the PWL module of OMAP1 processors.  Say Y if your board

drivers/video/backlight/omap1_bl.c

@@ -14,8 +14,8 @@
 #include <linux/slab.h>
 #include <linux/platform_data/omap1_bl.h>
 
-#include <mach/hardware.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 

drivers/video/fbdev/omap/Kconfig

@@ -2,7 +2,7 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support"
 	depends on FB
-	depends on ARCH_OMAP1
+	depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -42,7 +42,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_LCD_H3
 	bool "TPS65010 LCD controller on OMAP-H3"
-	depends on MACH_OMAP_H3
+	depends on MACH_OMAP_H3 || COMPILE_TEST
 	depends on TPS65010=y
 	default y
 	help

drivers/video/fbdev/omap/lcd_ams_delta.c

@@ -14,7 +14,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/lcd.h>
 
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omapfb.h"
 

drivers/video/fbdev/omap/lcd_dma.c

@@ -25,7 +25,8 @@
 
 #include <linux/omap-dma.h>
 
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "lcdc.h"
 #include "lcd_dma.h"

drivers/video/fbdev/omap/lcd_inn1510.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include <linux/soc/ti/omap1-soc.h>
 
 #include "omapfb.h"
 

drivers/video/fbdev/omap/lcd_osk.c

@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <mach/hardware.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #include "omapfb.h"
 

drivers/video/fbdev/omap/lcdc.c

@@ -17,6 +17,8 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
 #include <linux/omap-dma.h>
 
 #include <asm/mach-types.h>

drivers/video/fbdev/omap/omapfb_main.c

@@ -20,8 +20,7 @@
 
 #include <linux/omap-dma.h>
 
-#include <mach/hardware.h>
-
+#include <linux/soc/ti/omap1-soc.h>
 #include "omapfb.h"
 #include "lcdc.h"
 

drivers/video/fbdev/omap/sossi.c

@@ -13,6 +13,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/omap-dma.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include "omapfb.h"
 #include "lcd_dma.h"