Commit 80534f09 authored by Eric Anholt's avatar Eric Anholt Committed by Arnd Bergmann

ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B

The Pi 2 B ends up like a Pi 1 B+, with the same peripherals and
pinout, but the CPU and memory layout changed to use the 2836.
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 4b8c3907
...@@ -62,7 +62,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ ...@@ -62,7 +62,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b.dtb \ bcm2835-rpi-b.dtb \
bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \ bcm4708-asus-rt-ac68u.dtb \
......
/dts-v1/;
#include "bcm2836.dtsi"
#include "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
model = "Raspberry Pi 2 Model B";
memory {
reg = <0 0x40000000>;
};
leds {
act {
gpios = <&gpio 47 0>;
};
pwr {
label = "PWR";
gpios = <&gpio 35 0>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};
};
&gpio {
pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
/* I2S interface */
i2s_alt0: i2s_alt0 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
#include "bcm283x.dtsi"
/ {
compatible = "brcm,bcm2836";
soc {
ranges = <0x7e000000 0x3f000000 0x1000000>,
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
local_intc: local_intc {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&local_intc>;
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&local_intc>;
interrupts = <9>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&local_intc>;
interrupts = <0>, // PHYS_SECURE_PPI
<1>, // PHYS_NONSECURE_PPI
<3>, // VIRT_PPI
<2>; // HYP_PPI
always-on;
};
cpus: cpus {
#address-cells = <1>;
#size-cells = <0>;
v7_cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
clock-frequency = <800000000>;
};
v7_cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf01>;
clock-frequency = <800000000>;
};
v7_cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf02>;
clock-frequency = <800000000>;
};
v7_cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf03>;
clock-frequency = <800000000>;
};
};
};
/* Make the BCM2835-style global interrupt controller be a child of the
* CPU-local interrupt controller.
*/
&intc {
compatible = "brcm,bcm2836-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-parent = <&local_intc>;
interrupts = <8>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment