Commit 80d97098 authored by James Cameron's avatar James Cameron Committed by Greg Kroah-Hartman

USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver

The modem was detected, the ttyUSB{0,1,2} appeared, a call could be
made, and the expected data rate was achieved.  Tested for an hour or
two, total of 100Mb.  I shall do more testing.
Signed-off-by: default avatarJames Cameron <quozl@laptop.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent b87e81e5
...@@ -165,6 +165,8 @@ static int option_send_setup(struct usb_serial_port *port); ...@@ -165,6 +165,8 @@ static int option_send_setup(struct usb_serial_port *port);
#define QUALCOMM_VENDOR_ID 0x05C6 #define QUALCOMM_VENDOR_ID 0x05C6
#define MAXON_VENDOR_ID 0x16d8
static struct usb_device_id option_ids[] = { static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
...@@ -249,6 +251,7 @@ static struct usb_device_id option_ids[] = { ...@@ -249,6 +251,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
MODULE_DEVICE_TABLE(usb, option_ids); MODULE_DEVICE_TABLE(usb, option_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment