Merge branch 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc

* 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc: (31 commits)
  ARM: OMAP: Warn if omap_ioremap is called before SoC detection
  ARM: OMAP: Move set_globals initialization to happen in init_early
  ARM: OMAP: Map SRAM later on with ioremap_exec()
  ARM: OMAP: Remove calls to SRAM allocations for framebuffer
  ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
  ARM: OMAP1: Use generic map_io, init_early and init_irq
  arm/dts: OMAP3+: Add mpu, dsp and iva nodes
  arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver
  ARM: OMAP2+: l3-noc: Add support for device-tree
  ARM: OMAP2+: board-generic: Add i2c static init
  ARM: OMAP2+: board-generic: Add DT support to generic board
  arm/dts: Add support for OMAP3 Beagle board
  arm/dts: Add initial device tree support for OMAP3 SoC
  arm/dts: Add support for OMAP4 SDP board
  arm/dts: Add support for OMAP4 PandaBoard
  arm/dts: Add initial device tree support for OMAP4 SoC
  ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node
  ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  of: Add helpers to get one string in multiple strings property
  ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures
  ...

Fix up trivial header file conflicts in arch/arm/mach-omap2/board-generic.c

Documentation/devicetree/bindings/arm/omap/dsp.txt

+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+    compatible = "ti,omap3-c64";
+    ti,hwmods = "dsp";
+};

Documentation/devicetree/bindings/arm/omap/iva.txt

+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+  - "ti,ivahd" for OMAP4
+  - "ti,iva2.2" for OMAP3
+  - "ti,iva2.1" for OMAP2430
+  - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+    compatible = "ti,ivahd", "ti,iva";
+    ti,hwmods = "iva";
+};

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+               Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+	compatible = "ti,omap4-l3-noc", "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};

Documentation/devicetree/bindings/arm/omap/mpu.txt

+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+               Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+    compatible = "ti,omap4-mpu";
+    ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+    compatible = "ti,omap3-mpu";
+    ti,hwmods = "mpu";
+};

Documentation/devicetree/bindings/arm/omap/omap.txt

+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+  form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+  HW documentation, attached to a device. Must contain at least
+  one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+  during suspend.
+
+
+Example:
+
+spinlock@1 {
+    compatible = "ti,omap4-spinlock";
+    ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+  compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+  compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+  compatible = "ti,omap4-panda", "ti,omap4430"

arch/arm/boot/dts/omap3-beagle.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};

arch/arm/boot/dts/omap3.dtsi

+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		intc: interrupt-controller@1 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+	};
+};

arch/arm/boot/dts/omap4-panda.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4-sdp.dts

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	/*
+	 * Since the initial device tree board file does not create any
+	 * devices (MMC, network...), the only way to boot is to provide a
+	 * ramdisk.
+	 */
+	chosen {
+		bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

arch/arm/boot/dts/omap4.dtsi

+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&gic>;
+
+	aliases {
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+			ti,hwmods = "dsp";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 *
+	 * MPU -+-- MPU_PRIVATE - GIC, L2
+	 *      |
+	 *      +----------------+----------+
+	 *      |                |          |
+	 *      +            +- EMIF - DDR  |
+	 *      |            |              |
+	 *      |            +     +--------+
+	 *      |            |     |
+	 *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
+	 *      |            |
+	 *      +- L3_MAIN --+- L4_CORE - IPs...
+	 *                   |
+	 *                   +- L4_PER - IPs...
+	 *                   |
+	 *                   +- L4_CFG -+- L4_WKUP - IPs...
+	 *                   |          |
+	 *                   |          +- IPs...
+	 *                   +- IPU ----+
+	 *                   |          |
+	 *                   +- DSP ----+
+	 *                   |          |
+	 *                   +- DSS ----+
+	 *
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48241000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48241000 0x1000>,
+			      <0x48240100 0x0100>;
+		};
+	};
+};

arch/arm/mach-omap1/board-ams-delta.c

@@ -134,12 +134,6 @@ void ams_delta_latch2_write(u16 mask, u16 value)
 	*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
 }
 
-static void __init ams_delta_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct map_desc ams_delta_io_desc[] __initdata = {
 	/* AMS_DELTA_LATCH1 */
 	{
@@ -378,17 +372,13 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
-static void __init ams_delta_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.atag_offset	= 0x100,
-	.map_io		= ams_delta_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= ams_delta_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-fsample.c

@@ -296,6 +296,39 @@ static struct omap_board_config_kernel fsample_config[] __initdata = {
 
 static void __init omap_fsample_init(void)
 {
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+			OMAP7XX_IO_CONF_9);
+
 	fsample_init_smc91x();
 
 	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -325,12 +358,6 @@ static void __init omap_fsample_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_fsample_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_fsample_io_desc[] __initdata = {
 	{
@@ -349,49 +376,18 @@ static struct map_desc omap_fsample_io_desc[] __initdata = {
 
 static void __init omap_fsample_map_io(void)
 {
-	omap1_map_common_io();
+	omap15xx_map_io();
 	iotable_init(omap_fsample_io_desc,
 		     ARRAY_SIZE(omap_fsample_io_desc));
-
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 	.atag_offset	= 0x100,
 	.map_io		= omap_fsample_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_fsample_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-generic.c

@@ -27,12 +27,6 @@
 #include <plat/board.h>
 #include <plat/common.h>
 
-static void __init omap_generic_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 /* assume no Mini-AB port */
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -86,17 +80,13 @@ static void __init omap_generic_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_generic_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
 	.atag_offset	= 0x100,
-	.map_io		= omap_generic_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_generic_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h2.c

@@ -372,12 +372,6 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	},
 };
 
-static void __init h2_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config h2_usb_config __initdata = {
 	/* usb1 has a Mini-AB port and external isp1301 transceiver */
 	.otg		= 2,
@@ -453,17 +447,13 @@ static void __init h2_init(void)
 	h2_mmc_init();
 }
 
-static void __init h2_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
 	.atag_offset	= 0x100,
-	.map_io		= h2_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= h2_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-h3.c

@@ -435,23 +435,13 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
-static void __init h3_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
 	.atag_offset	= 0x100,
-	.map_io		= h3_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= h3_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-htcherald.c

@@ -499,7 +499,7 @@ static void __init htcherald_lcd_init(void)
 
 static void __init htcherald_map_io(void)
 {
-	omap1_map_common_io();
+	omap7xx_map_io();
 
 	/*
 	 * The LCD panel must be disabled and DMA turned off here, as doing
@@ -600,20 +600,14 @@ static void __init htcherald_init(void)
 #endif
 }
 
-static void __init htcherald_init_irq(void)
-{
-	printk(KERN_INFO "htcherald_init_irq.\n");
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
 	.atag_offset    = 0x100,
 	.map_io         = htcherald_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq       = htcherald_init_irq,
+	.init_irq       = omap1_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -288,12 +288,6 @@ static void __init innovator_init_smc91x(void)
 	}
 }
 
-static void __init innovator_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_usb_config innovator1510_usb_config __initdata = {
 	/* for bundled non-standard host and peripheral cables */
@@ -438,30 +432,32 @@ static void __init innovator_init(void)
 	innovator_mmc_init();
 }
 
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
 static void __init innovator_map_io(void)
 {
-	omap1_map_common_io();
+	omap15xx_map_io();
 
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
 	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
 	udelay(10);	/* Delay needed for FPGA */
 
 	/* Dump the Innovator FPGA rev early - useful info for support. */
-		printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
+	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
 			fpga_read(OMAP1510_FPGA_REV_HIGH),
 			fpga_read(OMAP1510_FPGA_REV_LOW),
 			fpga_read(OMAP1510_FPGA_BOARD_REV));
-	}
-#endif
 }
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
 	.atag_offset	= 0x100,
 	.map_io		= innovator_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= innovator_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-nokia770.c

@@ -38,21 +38,6 @@
 
 #define ADS7846_PENDOWN_GPIO	15
 
-static void __init omap_nokia770_init_irq(void)
-{
-	/* On Nokia 770, the SleepX signal is masked with an
-	 * MPUIO line by default.  It has to be unmasked for it
-	 * to become functional */
-
-	/* SleepX mask direction */
-	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
-	/* Unmask SleepX signal */
-	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int nokia770_keymap[] = {
 	KEY(1, 0, GROUP_0 | KEY_UP),
 	KEY(2, 0, GROUP_1 | KEY_F5),
@@ -245,6 +230,15 @@ static inline void nokia770_mmc_init(void)
 
 static void __init omap_nokia770_init(void)
 {
+	/* On Nokia 770, the SleepX signal is masked with an
+	 * MPUIO line by default.  It has to be unmasked for it
+	 * to become functional */
+
+	/* SleepX mask direction */
+	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+	/* Unmask SleepX signal */
+	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
@@ -257,16 +251,12 @@ static void __init omap_nokia770_init(void)
 	nokia770_mmc_init();
 }
 
-static void __init omap_nokia770_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
-	.map_io		= omap_nokia770_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_nokia770_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-osk.c

@@ -278,12 +278,6 @@ static void __init osk_init_cf(void)
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
-static void __init osk_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config osk_usb_config __initdata = {
 	/* has usb host connector (A) ... for development it can also
 	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -575,17 +569,13 @@ static void __init osk_init(void)
 	osk_mistral_init();
 }
 
-static void __init osk_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.atag_offset	= 0x100,
-	.map_io		= osk_map_io,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= osk_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmte.c

@@ -58,12 +58,6 @@
 #define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
 #define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
 
-static void __init omap_palmte_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int palmte_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Calendar */
 	KEY(1, 0, KEY_F2),		/* Contacts */
@@ -268,16 +262,12 @@ static void __init omap_palmte_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_palmte_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
-	.map_io		= omap_palmte_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmte_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmtt.c

@@ -263,12 +263,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
 	}
 };
 
-static void __init omap_palmtt_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static struct omap_usb_config palmtt_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0,
@@ -315,16 +309,12 @@ static void __init omap_palmtt_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_palmtt_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.atag_offset	= 0x100,
-	.map_io		= omap_palmtt_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmtt_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-palmz71.c

@@ -57,13 +57,6 @@
 #define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
 #define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
 
-static void __init
-omap_palmz71_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
 static const unsigned int palmz71_keymap[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(1, 0, KEY_F2),
@@ -334,17 +327,12 @@ omap_palmz71_init(void)
 	palmz71_gpio_setup(0);
 }
 
-static void __init
-omap_palmz71_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
 	.atag_offset	= 0x100,
-	.map_io		= omap_palmz71_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_palmz71_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_palmz71_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -264,6 +264,39 @@ static void __init perseus2_init_smc91x(void)
 
 static void __init omap_perseus2_init(void)
 {
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+				OMAP7XX_IO_CONF_9);
+
 	perseus2_init_smc91x();
 
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
@@ -293,11 +326,6 @@ static void __init omap_perseus2_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init omap_perseus2_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
 	{
@@ -310,49 +338,18 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-	omap1_map_common_io();
+	omap7xx_map_io();
 	iotable_init(omap_perseus2_io_desc,
 		     ARRAY_SIZE(omap_perseus2_io_desc));
-
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
 	.atag_offset	= 0x100,
 	.map_io		= omap_perseus2_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_perseus2_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-sx1.c

@@ -406,24 +406,13 @@ static void __init omap_sx1_init(void)
 	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
 	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
 }
-/*----------------------------------------*/
-static void __init omap_sx1_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-/*----------------------------------------*/
-
-static void __init omap_sx1_map_io(void)
-{
-	omap1_map_common_io();
-}
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
-	.map_io		= omap_sx1_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_sx1_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -159,17 +159,6 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 static struct omap_board_config_kernel voiceblue_config[] = {
 };
 
-static void __init voiceblue_init_irq(void)
-{
-	omap1_init_common_hw();
-	omap1_init_irq();
-}
-
-static void __init voiceblue_map_io(void)
-{
-	omap1_map_common_io();
-}
-
 #define MACHINE_PANICED		1
 #define MACHINE_REBOOTING	2
 #define MACHINE_REBOOT		4
@@ -302,9 +291,10 @@ static void __init voiceblue_init(void)
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
 	.atag_offset	= 0x100,
-	.map_io		= voiceblue_map_io,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
 	.reserve	= omap_reserve,
-	.init_irq	= voiceblue_init_irq,
+	.init_irq	= omap1_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap1_timer,
 MACHINE_END

arch/arm/mach-omap1/devices.c

@@ -22,6 +22,7 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
+#include <plat/common.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
@@ -291,6 +292,8 @@ static int __init omap1_init_devices(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
+	omap_sram_init();
+
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */

arch/arm/mach-omap1/io.c

@@ -21,7 +21,6 @@
 #include "clock.h"
 
 extern void omap_check_revision(void);
-extern void omap_sram_init(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -85,51 +84,45 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
 #endif
 
 /*
- * Maps common IO regions for omap1. This should only get called from
- * board specific init.
+ * Maps common IO regions for omap1
  */
-void __init omap1_map_common_io(void)
+static void __init omap1_map_common_io(void)
 {
 	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	/* We want to check CPU revision early for cpu_is_omapxxxx() macros.
-	 * IO space mapping must be initialized before we can do that.
-	 */
-	omap_check_revision();
+}
 
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
+void __init omap7xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-	}
+}
 #endif
+
 #ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
+void __init omap15xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-	}
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
+void __init omap16xx_map_io(void)
+{
+	omap1_map_common_io();
 	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
-	}
-#endif
-
-	omap_sram_init();
-	omap_init_consistent_dma_size();
 }
+#endif
 
 /*
- * Common low-level hardware init for omap1. This should only get called from
- * board specific init.
+ * Common low-level hardware init for omap1.
  */
-void __init omap1_init_common_hw(void)
+void omap1_init_early(void)
 {
+	omap_check_revision();
+	omap_ioremap_init();
+
 	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
 	 * on a Posted Write in the TIPB Bridge".
 	 */
@@ -139,8 +132,8 @@ void __init omap1_init_common_hw(void)
 	/* Must init clocks early to assure that timer interrupt works
 	 */
 	omap1_clk_init();
-
 	omap1_mux_init();
+	omap_init_consistent_dma_size();
 }
 
 /*

arch/arm/mach-omap2/Kconfig

@@ -108,9 +108,13 @@ comment "OMAP Board Type"
 	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP2
+	bool "Generic OMAP2+ board"
+	depends on ARCH_OMAP2PLUS
+	select USE_OF
 	default y
+	help
+	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
+	  More information at Documentation/devicetree
 
 config MACH_OMAP2_TUSB6010
 	bool

arch/arm/mach-omap2/board-generic.c

 /*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  *
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
 
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
 };
 
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
 {
-	omap2_init_common_infrastructure();
+	omap4_pmic_init("twl6030", &sdp4430_twldata);
 }
 
+static struct twl4030_platform_data beagle_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+	omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "ti,omap-infra", },
+	{ }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+	{ .compatible = "ti,omap3-intc", },
+	{ .compatible = "arm,cortex-a9-gic", },
+	{ }
+};
+
 static void __init omap_generic_init(void)
 {
+	struct device_node *node = of_find_matching_node(NULL, intc_match);
+	if (node)
+		irq_domain_add_simple(node, 0);
+
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
+
+	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
+}
+
+static void __init omap4_init(void)
+{
+	omap4_i2c_init();
+	omap_generic_init();
 }
 
-static void __init omap_generic_map_io(void)
+static void __init omap3_init(void)
 {
-	if (cpu_is_omap242x()) {
-		omap2_set_globals_242x();
-		omap242x_map_common_io();
-	} else if (cpu_is_omap243x()) {
-		omap2_set_globals_243x();
-		omap243x_map_common_io();
-	} else if (cpu_is_omap34xx()) {
-		omap2_set_globals_3xxx();
-		omap34xx_map_common_io();
-	} else if (cpu_is_omap44xx()) {
-		omap2_set_globals_443x();
-		omap44xx_map_common_io();
-	}
+	omap3_i2c_init();
+	omap_generic_init();
 }
 
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
-	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+	"ti,omap2420",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
-	.map_io		= omap_generic_map_io,
-	.init_early	= omap_generic_init_early,
+	.map_io		= omap242x_map_io,
+	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
+	.dt_compat	= omap242x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+	"ti,omap2430",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap243x_map_io,
+	.init_early	= omap2430_init_early,
+	.init_irq	= omap2_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap2_timer,
+	.dt_compat	= omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+	"ti,omap3",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3430_init_early,
+	.init_irq	= omap3_init_irq,
+	.init_machine	= omap3_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+	"ti,omap4",
+	NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap4_map_io,
+	.init_early	= omap4430_init_early,
+	.init_irq	= gic_init_irq,
+	.init_machine	= omap4_init,
+	.timer		= &omap4_timer,
+	.dt_compat	= omap4_boards_compat,
 MACHINE_END
+#endif

arch/arm/mach-omap2/board-omap3beagle.c

@@ -444,11 +444,6 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static void __init omap3_beagle_init_early(void)
-{
-	omap2_init_common_infrastructure();
-}
-
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&leds_gpio,
 	&keys_gpio,
@@ -486,8 +481,8 @@ static void __init beagle_opp_init(void)
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
 
-		mpu_dev = omap2_get_mpuss_device();
-		iva_dev = omap2_get_iva_device();
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
 
 		if (!mpu_dev || !iva_dev) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -555,7 +550,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_early	= omap3_beagle_init_early,
+	.init_early	= omap3_init_early,
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,

arch/arm/mach-omap2/board-ti8168evm.c

@@ -37,7 +37,6 @@ static void __init ti8168_evm_init(void)
 
 static void __init ti8168_evm_map_io(void)
 {
-	omap2_set_globals_ti816x();
 	omapti816x_map_common_io();
 }
 

arch/arm/mach-omap2/common.c

@@ -45,11 +45,11 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2420_SDRC_BASE,
-	.sms	= OMAP2420_SMS_BASE,
-	.ctrl	= OMAP242X_CTRL_BASE,
-	.prm	= OMAP2420_PRM_BASE,
-	.cm	= OMAP2420_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -59,7 +59,6 @@ void __init omap2_set_globals_242x(void)
 
 void __init omap242x_map_io(void)
 {
-	omap2_set_globals_242x();
 	omap242x_map_common_io();
 }
 #endif
@@ -69,11 +68,11 @@ void __init omap242x_map_io(void)
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP243X_SDRC_BASE,
-	.sms	= OMAP243X_SMS_BASE,
-	.ctrl	= OMAP243X_CTRL_BASE,
-	.prm	= OMAP2430_PRM_BASE,
-	.cm	= OMAP2430_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -83,7 +82,6 @@ void __init omap2_set_globals_243x(void)
 
 void __init omap243x_map_io(void)
 {
-	omap2_set_globals_243x();
 	omap243x_map_common_io();
 }
 #endif
@@ -93,11 +91,11 @@ void __init omap243x_map_io(void)
 static struct omap_globals omap3_globals = {
 	.class	= OMAP343X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP343X_SDRC_BASE,
-	.sms	= OMAP343X_SMS_BASE,
-	.ctrl	= OMAP343X_CTRL_BASE,
-	.prm	= OMAP3430_PRM_BASE,
-	.cm	= OMAP3430_CM_BASE,
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_3xxx(void)
@@ -107,7 +105,6 @@ void __init omap2_set_globals_3xxx(void)
 
 void __init omap3_map_io(void)
 {
-	omap2_set_globals_3xxx();
 	omap34xx_map_common_io();
 }
 
@@ -122,9 +119,9 @@ void __init omap3_map_io(void)
 static struct omap_globals ti816x_globals = {
 	.class  = OMAP343X_CLASS,
 	.tap    = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
-	.ctrl   = TI816X_CTRL_BASE,
-	.prm    = TI816X_PRCM_BASE,
-	.cm     = TI816X_PRCM_BASE,
+	.ctrl   = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
+	.prm    = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+	.cm     = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
 };
 
 void __init omap2_set_globals_ti816x(void)
@@ -137,11 +134,11 @@ void __init omap2_set_globals_ti816x(void)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP443X_SCM_BASE,
-	.ctrl_pad	= OMAP443X_CTRL_BASE,
-	.prm	= OMAP4430_PRM_BASE,
-	.cm	= OMAP4430_CM_BASE,
-	.cm2	= OMAP4430_CM2_BASE,
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl_pad	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
@@ -153,7 +150,6 @@ void __init omap2_set_globals_443x(void)
 
 void __init omap4_map_io(void)
 {
-	omap2_set_globals_443x();
 	omap44xx_map_common_io();
 }
 #endif

arch/arm/mach-omap2/control.c

@@ -149,17 +149,11 @@ static struct omap3_control_regs control_context;
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
-	/* Static mapping, never released */
-	if (omap2_globals->ctrl) {
-		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
-		WARN_ON(!omap2_ctrl_base);
-	}
+	if (omap2_globals->ctrl)
+		omap2_ctrl_base = omap2_globals->ctrl;
 
-	/* Static mapping, never released */
-	if (omap2_globals->ctrl_pad) {
-		omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
-		WARN_ON(!omap4_ctrl_pad_base);
-	}
+	if (omap2_globals->ctrl_pad)
+		omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
 }
 
 void __iomem *omap_ctrl_base_get(void)

arch/arm/mach-omap2/devices.c

@@ -16,6 +16,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -76,6 +77,10 @@ static int __init omap4_l3_init(void)
 	struct platform_device *pdev;
 	char oh_name[L3_MODULES_MAX_LEN];
 
+	/* If dtb is there, the devices will be created dynamically */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
@@ -220,14 +225,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-struct omap_device_pm_latency omap_keyboard_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -247,9 +244,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 	keypad_data = sdp4430_keypad_data;
 
 	pdev = omap_device_build(name, id, oh, keypad_data,
-			sizeof(struct omap4_keypad_platform_data),
-			omap_keyboard_latency,
-			ARRAY_SIZE(omap_keyboard_latency), 0);
+			sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
 
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n",
@@ -262,14 +257,6 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 }
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
-	[0] = {
-		.activate_func = omap_device_enable_hwmods,
-		.deactivate_func = omap_device_idle_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline void omap_init_mbox(void)
 {
 	struct omap_hwmod *oh;
@@ -281,8 +268,7 @@ static inline void omap_init_mbox(void)
 		return;
 	}
 
-	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
-				mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
+	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
 						__func__, PTR_ERR(pdev));
 }
@@ -365,14 +351,6 @@ static inline void omap_init_mcpdm(void) {}
 
 #include <plat/mcspi.h>
 
-struct omap_device_pm_latency omap_mcspi_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -403,8 +381,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 
 	spi_num++;
 	pdev = omap_device_build(name, spi_num, oh, pdata,
-				sizeof(*pdata),	omap_mcspi_latency,
-				ARRAY_SIZE(omap_mcspi_latency), 0);
+				sizeof(*pdata),	NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
 				name, oh->name);
 	kfree(pdata);
@@ -730,14 +707,6 @@ static int __init omap2_init_devices(void)
 arch_initcall(omap2_init_devices);
 
 #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int __init omap_init_wdt(void)
 {
 	int id = -1;
@@ -755,9 +724,7 @@ static int __init omap_init_wdt(void)
 		return -EINVAL;
 	}
 
-	pdev = omap_device_build(dev_name, id, oh, NULL, 0,
-				omap_wdt_latency,
-				ARRAY_SIZE(omap_wdt_latency), 0);
+	pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
 				dev_name, oh->name);
 	return 0;

arch/arm/mach-omap2/display.c

@@ -37,14 +37,6 @@ static struct platform_device omap_display_device = {
 	},
 };
 
-static struct omap_device_pm_latency omap_dss_latency[] = {
-	[0] = {
-		.deactivate_func        = omap_device_idle_hwmods,
-		.activate_func          = omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 struct omap_dss_hwmod_data {
 	const char *oh_name;
 	const char *dev_name;
@@ -165,8 +157,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
 				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
-				omap_dss_latency,
-				ARRAY_SIZE(omap_dss_latency), 0);
+				NULL, 0, 0);
 
 		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
 				curr_dss_hwmod[i].oh_name))

arch/arm/mach-omap2/dma.c

@@ -87,14 +87,6 @@ static u16 reg_map[] = {
 	[CCDN]			= 0xd8,
 };
 
-static struct omap_device_pm_latency omap2_dma_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void __iomem *dma_base;
 static inline void dma_write(u32 val, int reg, int lch)
 {
@@ -258,8 +250,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	p->errata		= configure_dma_errata();
 
-	pdev = omap_device_build(name, 0, oh, p, sizeof(*p),
-			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+	pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
 	kfree(p);
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",

arch/arm/mach-omap2/gpio.c

@@ -24,14 +24,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-static struct omap_device_pm_latency omap_gpio_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -108,9 +100,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	}
 
 	pdev = omap_device_build(name, id - 1, oh, pdata,
-				sizeof(*pdata),	omap_gpio_latency,
-				ARRAY_SIZE(omap_gpio_latency),
-				false);
+				sizeof(*pdata),	NULL, 0, false);
 	kfree(pdata);
 
 	if (IS_ERR(pdev)) {

arch/arm/mach-omap2/hsmmc.c

@@ -409,31 +409,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-	/*
-	 * XXX There should also be an entry here to power off/on the
-	 * MMC regulators/PBIAS cells, etc.
-	 */
-};
-
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
-	struct omap_device_pm_latency *ohl;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
 	struct omap_mmc_platform_data *mmc_data;
 	struct omap_mmc_dev_attr *mmc_dev_attr;
 	char *name;
 	int l;
-	int ohl_cnt = 0;
 
 	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 	if (!mmc_data) {
@@ -448,8 +434,6 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
 
 	name = "omap_hsmmc";
-	ohl = omap_hsmmc_latency;
-	ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
 
 	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);
@@ -468,7 +452,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	}
 
 	pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
-		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
+		sizeof(struct omap_mmc_platform_data), NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
 		kfree(mmc_data->slots[0].name);

arch/arm/mach-omap2/hwspinlock.c

@@ -23,14 +23,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-struct omap_device_pm_latency omap_spinlock_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
 int __init hwspinlocks_init(void)
 {
 	int retval = 0;
@@ -48,9 +40,7 @@ int __init hwspinlocks_init(void)
 	if (oh == NULL)
 		return -EINVAL;
 
-	pdev = omap_device_build(dev_name, 0, oh, NULL, 0,
-				omap_spinlock_latency,
-				ARRAY_SIZE(omap_spinlock_latency), false);
+	pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		pr_err("Can't build omap_device for %s:%s\n", dev_name,
 								oh_name);

arch/arm/mach-omap2/io.c

@@ -34,8 +34,8 @@
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
-#include "io.h"
 
+#include <plat/common.h>
 #include <plat/omap-pm.h>
 #include "voltage.h"
 #include "powerdomain.h"
@@ -43,6 +43,7 @@
 #include "clockdomain.h"
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
+#include <plat/common.h>
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -239,26 +240,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-static void __init _omap2_map_common_io(void)
-{
-	/* Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but we must also do it here because of the CPU
-	 * revision check below.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-
-	omap2_check_revision();
-	omap_sram_init();
-	omap_init_consistent_dma_size();
-}
-
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
-	_omap2_map_common_io();
 }
 #endif
 
@@ -267,7 +253,6 @@ void __init omap243x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
 	iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
-	_omap2_map_common_io();
 }
 #endif
 
@@ -275,7 +260,6 @@ void __init omap243x_map_common_io(void)
 void __init omap34xx_map_common_io(void)
 {
 	iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
-	_omap2_map_common_io();
 }
 #endif
 
@@ -283,7 +267,6 @@ void __init omap34xx_map_common_io(void)
 void __init omapti816x_map_common_io(void)
 {
 	iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
-	_omap2_map_common_io();
 }
 #endif
 
@@ -291,7 +274,6 @@ void __init omapti816x_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
-	_omap2_map_common_io();
 }
 #endif
 
@@ -337,33 +319,16 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 /* See irq.c, omap4-common.c and entry-macro.S */
 void __iomem *omap_irq_base;
 
-void __init omap2_init_common_infrastructure(void)
+static void __init omap_common_init_early(void)
 {
-	u8 postsetup_state;
+	omap2_check_revision();
+	omap_ioremap_init();
+	omap_init_consistent_dma_size();
+}
 
-	if (cpu_is_omap242x()) {
-		omap2xxx_voltagedomains_init();
-		omap242x_powerdomains_init();
-		omap242x_clockdomains_init();
-		omap2420_hwmod_init();
-	} else if (cpu_is_omap243x()) {
-		omap2xxx_voltagedomains_init();
-		omap243x_powerdomains_init();
-		omap243x_clockdomains_init();
-		omap2430_hwmod_init();
-	} else if (cpu_is_omap34xx()) {
-		omap3xxx_voltagedomains_init();
-		omap3xxx_powerdomains_init();
-		omap3xxx_clockdomains_init();
-		omap3xxx_hwmod_init();
-	} else if (cpu_is_omap44xx()) {
-		omap44xx_voltagedomains_init();
-		omap44xx_powerdomains_init();
-		omap44xx_clockdomains_init();
-		omap44xx_hwmod_init();
-	} else {
-		pr_err("Could not init hwmod data - unknown SoC\n");
-        }
+static void __init omap_hwmod_init_postsetup(void)
+{
+	u8 postsetup_state;
 
 	/* Set the default postsetup state for all hwmods */
 #ifdef CONFIG_PM_RUNTIME
@@ -392,67 +357,101 @@ void __init omap2_init_common_infrastructure(void)
 				     &postsetup_state);
 
 	omap_pm_if_early_init();
-
-	if (cpu_is_omap2420())
-		omap2420_clk_init();
-	else if (cpu_is_omap2430())
-		omap2430_clk_init();
-	else if (cpu_is_omap34xx())
-		omap3xxx_clk_init();
-	else if (cpu_is_omap44xx())
-		omap4xxx_clk_init();
-	else
-		pr_err("Could not init clock framework - unknown SoC\n");
 }
 
 void __init omap2420_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap2_set_globals_242x();
+	omap_common_init_early();
+	omap2xxx_voltagedomains_init();
+	omap242x_powerdomains_init();
+	omap242x_clockdomains_init();
+	omap2420_hwmod_init();
+	omap_hwmod_init_postsetup();
+	omap2420_clk_init();
 }
 
 void __init omap2430_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap2_set_globals_243x();
+	omap_common_init_early();
+	omap2xxx_voltagedomains_init();
+	omap243x_powerdomains_init();
+	omap243x_clockdomains_init();
+	omap2430_hwmod_init();
+	omap_hwmod_init_postsetup();
+	omap2430_clk_init();
+}
+
+/*
+ * Currently only board-omap3beagle.c should call this because of the
+ * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
+ */
+void __init omap3_init_early(void)
+{
+	omap2_set_globals_3xxx();
+	omap_common_init_early();
+	omap3xxx_voltagedomains_init();
+	omap3xxx_powerdomains_init();
+	omap3xxx_clockdomains_init();
+	omap3xxx_hwmod_init();
+	omap_hwmod_init_postsetup();
+	omap3xxx_clk_init();
 }
 
 void __init omap3430_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap3_init_early();
 }
 
 void __init omap35xx_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap3_init_early();
 }
 
 void __init omap3630_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap3_init_early();
 }
 
 void __init am35xx_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap3_init_early();
 }
 
 void __init ti816x_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap2_set_globals_ti816x();
+	omap_common_init_early();
+	omap3xxx_voltagedomains_init();
+	omap3xxx_powerdomains_init();
+	omap3xxx_clockdomains_init();
+	omap3xxx_hwmod_init();
+	omap_hwmod_init_postsetup();
+	omap3xxx_clk_init();
 }
 
 void __init omap4430_init_early(void)
 {
-	omap2_init_common_infrastructure();
+	omap2_set_globals_443x();
+	omap_common_init_early();
+	omap44xx_voltagedomains_init();
+	omap44xx_powerdomains_init();
+	omap44xx_clockdomains_init();
+	omap44xx_hwmod_init();
+	omap_hwmod_init_postsetup();
+	omap4xxx_clk_init();
 }
 
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {
+	omap_sram_init();
+
 	if (cpu_is_omap24xx() || omap3_has_sdrc()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
 	}
-
 }
 
 /*

arch/arm/mach-omap2/io.h

-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /*  __MACH_OMAP2_IO_H__ */

arch/arm/mach-omap2/mcbsp.c

@@ -122,14 +122,6 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 	return 0;
 }
 
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -175,8 +167,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
-				sizeof(*pdata), omap2_mcbsp_latency,
-				ARRAY_SIZE(omap2_mcbsp_latency), false);
+				sizeof(*pdata), NULL, 0, false);
 	kfree(pdata);
 	if (IS_ERR(pdev))  {
 		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,

arch/arm/mach-omap2/omap-smp.c

@@ -102,8 +102,11 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores;
 
-	/* Never released */
-	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+	/*
+	 * Currently we can't call ioremap here because
+	 * SoC detection won't work until after init_early.
+	 */
+	scu_base =  OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
 	BUG_ON(!scu_base);
 
 	ncores = scu_get_core_count(scu_base);

arch/arm/mach-omap2/omap_l3_noc.c

@@ -56,11 +56,11 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 {
 
 	struct omap4_l3 *l3 = _l3;
-	int inttype, i, j;
+	int inttype, i, k;
 	int err_src = 0;
-	u32 std_err_main_addr, std_err_main, err_reg;
-	u32 base, slave_addr, clear;
-	char *source_name;
+	u32 std_err_main, err_reg, clear, masterid;
+	void __iomem *base, *l3_targ_base;
+	char *target_name, *master_name = "UN IDENTIFIED";
 
 	/* Get the Type of interrupt */
 	inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 		 * Read the regerr register of the clock domain
 		 * to determine the source
 		 */
-		base = (u32)l3->l3_base[i];
-		err_reg =  readl(base + l3_flagmux[i] + (inttype << 3));
+		base = l3->l3_base[i];
+		err_reg = __raw_readl(base + l3_flagmux[i] +
+					+ L3_FLAGMUX_REGERR0 + (inttype << 3));
 
 		/* Get the corresponding error and analyse */
 		if (err_reg) {
 			/* Identify the source from control status register */
-			for (j = 0; !(err_reg & (1 << j)); j++)
-									;
+			err_src = __ffs(err_reg);
 
-			err_src = j;
 			/* Read the stderrlog_main_source from clk domain */
-			std_err_main_addr = base + *(l3_targ[i] + err_src);
-			std_err_main = readl(std_err_main_addr);
+			l3_targ_base = base + *(l3_targ[i] + err_src);
+			std_err_main =  __raw_readl(l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
+			masterid = __raw_readl(l3_targ_base +
+					L3_TARG_STDERRLOG_MSTADDR);
 
 			switch (std_err_main & CUSTOM_ERROR) {
 			case STANDARD_ERROR:
-				source_name =
-				l3_targ_stderrlog_main_name[i][err_src];
-
-				slave_addr = std_err_main_addr +
-						L3_SLAVE_ADDRESS_OFFSET;
-				WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
-					source_name, readl(slave_addr));
+				target_name =
+					l3_targ_inst_name[i][err_src];
+				WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+					target_name,
+					__raw_readl(l3_targ_base +
+						L3_TARG_STDERRLOG_SLVOFSLSB));
 				/* clear the std error log*/
 				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, std_err_main_addr);
+				writel(clear, l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
 				break;
 
 			case CUSTOM_ERROR:
-				source_name =
-				l3_targ_stderrlog_main_name[i][err_src];
-
-				WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
-							source_name);
+				target_name =
+					l3_targ_inst_name[i][err_src];
+				for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+					if (masterid == l3_masters[k].id)
+						master_name =
+							l3_masters[k].name;
+				}
+				WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+					master_name, target_name);
 				/* clear the std error log*/
 				clear = std_err_main | CLEAR_STDERR_LOG;
-				writel(clear, std_err_main_addr);
+				writel(clear, l3_targ_base +
+					L3_TARG_STDERRLOG_MAIN);
 				break;
 
 			default:
@@ -120,12 +127,11 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
 	return IRQ_HANDLED;
 }
 
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
 {
 	static struct omap4_l3 *l3;
 	struct resource	*res;
 	int ret;
-	int			irq;
 
 	l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
 	if (!l3)
@@ -177,8 +183,8 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
 	/*
 	 * Setup interrupt Handlers
 	 */
-	irq = platform_get_irq(pdev, 0);
-	ret = request_irq(irq,
+	l3->debug_irq = platform_get_irq(pdev, 0);
+	ret = request_irq(l3->debug_irq,
 			l3_interrupt_handler,
 			IRQF_DISABLED, "l3-dbg-irq", l3);
 	if (ret) {
@@ -186,10 +192,9 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
 						OMAP44XX_IRQ_L3_DBG);
 		goto err3;
 	}
-	l3->debug_irq = irq;
 
-	irq = platform_get_irq(pdev, 1);
-	ret = request_irq(irq,
+	l3->app_irq = platform_get_irq(pdev, 1);
+	ret = request_irq(l3->app_irq,
 			l3_interrupt_handler,
 			IRQF_DISABLED, "l3-app-irq", l3);
 	if (ret) {
@@ -197,7 +202,6 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
 						OMAP44XX_IRQ_L3_APP);
 		goto err4;
 	}
-	l3->app_irq = irq;
 
 	return 0;
 
@@ -214,7 +218,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
 {
 	struct omap4_l3 *l3 = platform_get_drvdata(pdev);
 
@@ -228,16 +232,29 @@ static int __exit omap4_l3_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+	{.compatible = "ti,omap4-l3-noc", },
+	{},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
 static struct platform_driver omap4_l3_driver = {
-	.remove		= __exit_p(omap4_l3_remove),
+	.probe		= omap4_l3_probe,
+	.remove		= __devexit_p(omap4_l3_remove),
 	.driver		= {
 		.name		= "omap_l3_noc",
+		.owner		= THIS_MODULE,
+		.of_match_table = l3_noc_match,
 	},
 };
 
 static int __init omap4_l3_init(void)
 {
-	return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+	return platform_driver_register(&omap4_l3_driver);
 }
 postcore_initcall_sync(omap4_l3_init);
 

arch/arm/mach-omap2/omap_l3_noc.h

- /*
+/*
  * OMAP4XXX L3 Interconnect  error handling driver header
  *
  * Copyright (C) 2011 Texas Corporation
@@ -23,63 +23,94 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
 #define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
 
-/*
- * L3 register offsets
- */
 #define L3_MODULES			3
 #define CLEAR_STDERR_LOG		(1 << 31)
 #define CUSTOM_ERROR			0x2
 #define STANDARD_ERROR			0x0
 #define INBAND_ERROR			0x0
-#define EMIF_KERRLOG_OFFSET		0x10
-#define L3_SLAVE_ADDRESS_OFFSET		0x14
-#define LOGICAL_ADDR_ERRORLOG		0x4
 #define L3_APPLICATION_ERROR		0x0
 #define L3_DEBUG_ERROR			0x1
 
-u32 l3_flagmux[L3_MODULES] = {
-	0x50C,
-	0x100C,
-	0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN		0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB	0x5c
+#define L3_TARG_STDERRLOG_MSTADDR	0x68
+#define L3_FLAGMUX_REGERR0		0xc
+
+#define NUM_OF_L3_MASTERS	(sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+	0x500,
+	0x1000,
+	0X0200
 };
 
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
-	0x148, /* DMM1 */
-	0x248, /* DMM2 */
-	0x348, /* ABE */
-	0x448, /* L4CFG */
-	0x648  /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+	0x100, /* DMM1 */
+	0x200, /* DMM2 */
+	0x300, /* ABE */
+	0x400, /* L4CFG */
+	0x600  /* CLK2 PWR DISC */
 };
 
-u32 l3_targ_stderrlog_main_clk2[] = {
-	0x548,		/* CORTEX M3 */
-	0x348,		/* DSS */
-	0x148,		/* GPMC */
-	0x448,		/* ISS */
-	0x748,		/* IVAHD */
-	0xD48,		/* missing in TRM  corresponds to AES1*/
-	0x948,		/* L4 PER0*/
-	0x248,		/* OCMRAM */
-	0x148,		/* missing in TRM corresponds to GPMC sERROR*/
-	0x648,		/* SGX */
-	0x848,		/* SL2 */
-	0x1648,		/* C2C */
-	0x1148,		/* missing in TRM corresponds PWR DISC CLK1*/
-	0xF48,		/* missing in TRM corrsponds to SHA1*/
-	0xE48,		/* missing in TRM corresponds to AES2*/
-	0xC48,		/* L4 PER3 */
-	0xA48,		/* L4 PER1*/
-	0xB48		/* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+	0x500, /* CORTEX M3 */
+	0x300, /* DSS */
+	0x100, /* GPMC */
+	0x400, /* ISS */
+	0x700, /* IVAHD */
+	0xD00, /* missing in TRM  corresponds to AES1*/
+	0x900, /* L4 PER0*/
+	0x200, /* OCMRAM */
+	0x100, /* missing in TRM corresponds to GPMC sERROR*/
+	0x600, /* SGX */
+	0x800, /* SL2 */
+	0x1600, /* C2C */
+	0x1100,	/* missing in TRM corresponds PWR DISC CLK1*/
+	0xF00, /* missing in TRM corrsponds to SHA1*/
+	0xE00, /* missing in TRM corresponds to AES2*/
+	0xC00, /* L4 PER3 */
+	0xA00, /* L4 PER1*/
+	0xB00 /* L4 PER2*/
 };
 
-u32 l3_targ_stderrlog_main_clk3[] = {
-	0x0148	/* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+	0x0100	/* EMUSS */
 };
 
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+	u32 id;
+	char name[10];
+} l3_masters[] = {
+	{ 0x0 , "MPU"},
+	{ 0x10, "CS_ADP"},
+	{ 0x14, "xxx"},
+	{ 0x20, "DSP"},
+	{ 0x30, "IVAHD"},
+	{ 0x40, "ISS"},
+	{ 0x44, "DucatiM3"},
+	{ 0x48, "FaceDetect"},
+	{ 0x50, "SDMA_Rd"},
+	{ 0x54, "SDMA_Wr"},
+	{ 0x58, "xxx"},
+	{ 0x5C, "xxx"},
+	{ 0x60, "SGX"},
+	{ 0x70, "DSS"},
+	{ 0x80, "C2C"},
+	{ 0x88, "xxx"},
+	{ 0x8C, "xxx"},
+	{ 0x90, "HSI"},
+	{ 0xA0, "MMC1"},
+	{ 0xA4, "MMC2"},
+	{ 0xA8, "MMC6"},
+	{ 0xB0, "UNIPRO1"},
+	{ 0xC0, "USBHOSTHS"},
+	{ 0xC4, "USBOTGHS"},
+	{ 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
 	{
 		"DMM1",
 		"DMM2",
@@ -112,10 +143,10 @@ char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
 	},
 };
 
-u32 *l3_targ[L3_MODULES] = {
-	l3_targ_stderrlog_main_clk1,
-	l3_targ_stderrlog_main_clk2,
-	l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+	l3_targ_inst_clk1,
+	l3_targ_inst_clk2,
+	l3_targ_inst_clk3,
 };
 
 struct omap4_l3 {
@@ -123,10 +154,9 @@ struct omap4_l3 {
 	struct clk *ick;
 
 	/* memory base */
-	void __iomem *l3_base[4];
+	void __iomem *l3_base[L3_MODULES];
 
 	int debug_irq;
 	int app_irq;
 };
-
 #endif

arch/arm/mach-omap2/omap_l3_smx.c

- /*
+/*
  * OMAP3XXX L3 Interconnect Driver
  *
  * Copyright (C) 2011 Texas Corporation
@@ -135,7 +135,7 @@ static char *omap3_l3_initiator_string(u8 initid)
 	}
 }
 
-/**
+/*
  * omap3_l3_block_irq - handles a register block's irq
  * @l3: struct omap3_l3 *
  * @base: register block base address
@@ -158,8 +158,7 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
 	WARN(true, "%s seen by %s %s at address %x\n",
 			omap3_l3_code_string(code),
 			omap3_l3_initiator_string(initid),
-			     multi ? "Multiple Errors" : "",
-						   address);
+			multi ? "Multiple Errors" : "", address);
 
 	return IRQ_HANDLED;
 }
@@ -191,14 +190,12 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 	}
 
 	/* identify the error source */
-	for (err_source = 0; !(status & (1 << err_source)); err_source++)
-									;
+	err_source = __ffs(status);
 
-	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+	base = l3->rt + omap3_l3_bases[int_type][err_source];
 	error = omap3_l3_readll(base, L3_ERROR_LOG);
 	if (error) {
 		error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
 		ret |= omap3_l3_block_irq(l3, error, error_addr);
 	}
 

arch/arm/mach-omap2/omap_l3_smx.h

- /*
+/*
  * OMAP3XXX L3 Interconnect Driver header
  *
  * Copyright (C) 2011 Texas Corporation
@@ -40,7 +40,7 @@
 #define L3_SI_CONTROL			0x020
 #define L3_SI_FLAG_STATUS_0		0x510
 
-const u64 shift = 1;
+static const u64 shift = 1;
 
 #define L3_STATUS_0_MPUIA_BRST		(shift << 0)
 #define L3_STATUS_0_MPUIA_RSP		(shift << 1)
@@ -206,7 +206,7 @@ struct omap3_l3 {
 };
 
 /* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
 	/* MPU IA */
 	0x1400,
 	0x1400,
@@ -305,7 +305,7 @@ unsigned int __iomem omap3_l3_app_bases[] = {
 	0,
 };
 
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
 	/* MPU DATA IA */
 	0x1400,
 	/* RESERVED */
@@ -321,7 +321,7 @@ unsigned int __iomem omap3_l3_debug_bases[] = {
 	/* REST RESERVED */
 };
 
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
 	omap3_l3_app_bases,
 	omap3_l3_debug_bases,
 };

arch/arm/mach-omap2/pm.c

@@ -26,38 +26,7 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
-	WARN_ON_ONCE(!mpu_dev);
-	return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
-	WARN_ON_ONCE(!iva_dev);
-	return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
-	WARN_ON_ONCE(!l3_dev);
-	return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
-	WARN_ON_ONCE(!dsp_dev);
-	return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -72,8 +41,6 @@ static int _init_omap_device(char *name, struct device **new_dev)
 		 __func__, name))
 		return -ENODEV;
 
-	*new_dev = &pdev->dev;
-
 	return 0;
 }
 
@@ -82,16 +49,16 @@ static int _init_omap_device(char *name, struct device **new_dev)
  */
 static void omap2_init_processor_devices(void)
 {
-	_init_omap_device("mpu", &mpu_dev);
+	_init_omap_device("mpu");
 	if (omap3_has_iva())
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("iva");
 
 	if (cpu_is_omap44xx()) {
-		_init_omap_device("l3_main_1", &l3_dev);
-		_init_omap_device("dsp", &dsp_dev);
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("l3_main_1");
+		_init_omap_device("dsp");
+		_init_omap_device("iva");
 	} else {
-		_init_omap_device("l3_main", &l3_dev);
+		_init_omap_device("l3_main");
 	}
 }
 
@@ -169,18 +136,26 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
  * in the opp entry
  */
 static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-						struct device *dev)
+					 const char *oh_name)
 {
 	struct voltagedomain *voltdm;
 	struct clk *clk;
 	struct opp *opp;
 	unsigned long freq, bootup_volt;
+	struct device *dev;
 
-	if (!vdd_name || !clk_name || !dev) {
+	if (!vdd_name || !clk_name || !oh_name) {
 		pr_err("%s: invalid parameters\n", __func__);
 		goto exit;
 	}
 
+	dev = omap_device_get_by_hwmod_name(oh_name);
+	if (IS_ERR(dev)) {
+		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+			__func__, oh_name);
+		goto exit;
+	}
+
 	voltdm = voltdm_lookup(vdd_name);
 	if (IS_ERR(voltdm)) {
 		pr_err("%s: unable to get vdd pointer for vdd_%s\n",
@@ -224,8 +199,8 @@ static void __init omap3_init_voltages(void)
 	if (!cpu_is_omap34xx())
 		return;
 
-	omap2_set_init_voltage("mpu_iva", "dpll1_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+	omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_ick", "l3_main");
 }
 
 static void __init omap4_init_voltages(void)
@@ -233,13 +208,14 @@ static void __init omap4_init_voltages(void)
 	if (!cpu_is_omap44xx())
 		return;
 
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
 static int __init omap2_common_pm_init(void)
 {
+	if (!of_have_populated_dt())
 		omap2_init_processor_devices();
 	omap_pm_if_init();
 

arch/arm/mach-omap2/prcm.c

@@ -151,17 +151,10 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 
 void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
-	/* Static mapping, never released */
-	if (omap2_globals->prm) {
-		prm_base = ioremap(omap2_globals->prm, SZ_8K);
-		WARN_ON(!prm_base);
-	}
-	if (omap2_globals->cm) {
-		cm_base = ioremap(omap2_globals->cm, SZ_8K);
-		WARN_ON(!cm_base);
-	}
-	if (omap2_globals->cm2) {
-		cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
-		WARN_ON(!cm2_base);
-	}
+	if (omap2_globals->prm)
+		prm_base = omap2_globals->prm;
+	if (omap2_globals->cm)
+		cm_base = omap2_globals->cm;
+	if (omap2_globals->cm2)
+		cm2_base = omap2_globals->cm2;
 }

arch/arm/mach-omap2/sdrc.c

@@ -117,15 +117,10 @@ int omap2_sdrc_get_params(unsigned long r,
 
 void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 {
-	/* Static mapping, never released */
-	if (omap2_globals->sdrc) {
-		omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
-		WARN_ON(!omap2_sdrc_base);
-	}
-	if (omap2_globals->sms) {
-		omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
-		WARN_ON(!omap2_sms_base);
-	}
+	if (omap2_globals->sdrc)
+		omap2_sdrc_base = omap2_globals->sdrc;
+	if (omap2_globals->sms)
+		omap2_sms_base = omap2_globals->sms;
 }
 
 /**

arch/arm/mach-omap2/serial.c

@@ -107,28 +107,6 @@ struct omap_uart_state {
 static LIST_HEAD(uart_list);
 static u8 num_uarts;
 
-static int uart_idle_hwmod(struct omap_device *od)
-{
-	omap_hwmod_idle(od->hwmods[0]);
-
-	return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
-	omap_hwmod_enable(od->hwmods[0]);
-
-	return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
-	{
-		.deactivate_func = uart_idle_hwmod,
-		.activate_func	 = uart_enable_hwmod,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline unsigned int __serial_read_reg(struct uart_port *up,
 					     int offset)
 {
@@ -800,8 +778,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 		return;
 
 	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
-			       omap_uart_latency,
-			       ARRAY_SIZE(omap_uart_latency), false);
+				 NULL, 0, false);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
 	     name, oh->name);
 

arch/arm/mach-omap2/sr_device.c

@@ -31,14 +31,6 @@
 
 static bool sr_enable_on_init;
 
-static struct omap_device_pm_latency omap_sr_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
-	},
-};
-
 /* Read EFUSE values from control registers for OMAP3430 */
 static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
@@ -121,8 +113,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->enable_on_init = sr_enable_on_init;
 
 	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
-			       omap_sr_latency,
-			       ARRAY_SIZE(omap_sr_latency), 0);
+				 NULL, 0, 0);
 	if (IS_ERR(pdev))
 		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
 			__func__, name, oh->name);

arch/arm/mach-omap2/timer.c

@@ -434,7 +434,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	int ret = 0;
 	char *name = "omap_timer";
 	struct dmtimer_platform_data *pdata;
-	struct omap_device *od;
+	struct platform_device *pdev;
 	struct omap_timer_capability_dev_attr *timer_dev_attr;
 	struct powerdomain *pwrdm;
 
@@ -476,12 +476,12 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 #ifdef CONFIG_PM
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 #endif
-	od = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
 			omap2_dmtimer_latency,
 			ARRAY_SIZE(omap2_dmtimer_latency),
 			0);
 
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s: %s.\n",
 			__func__, name, oh->name);
 		ret = -EINVAL;

arch/arm/mach-omap2/usb-musb.c

@@ -60,14 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = {
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static struct omap_device_pm_latency omap_musb_latency[] = {
-	{
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
 {
 	switch (board_data->interface_type) {
@@ -115,7 +107,6 @@ static struct omap_musb_board_data musb_default_board_data = {
 void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 {
 	struct omap_hwmod		*oh;
-	struct omap_device		*od;
 	struct platform_device		*pdev;
 	struct device			*dev;
 	int				bus_id = -1;
@@ -146,21 +137,18 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	}
 
         oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
+        if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+                 __func__, oh_name))
                 return;
-	}
 
-	od = omap_device_build(name, bus_id, oh, &musb_plat,
-			       sizeof(musb_plat), omap_musb_latency,
-			       ARRAY_SIZE(omap_musb_latency), false);
-	if (IS_ERR(od)) {
+	pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+			       sizeof(musb_plat), NULL, 0, false);
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build omap_device for %s %s\n",
 						name, oh_name);
 		return;
 	}
 
-	pdev = &od->pdev;
 	dev = &pdev->dev;
 	get_device(dev);
 	dev->dma_mask = &musb_dmamask;

arch/arm/plat-omap/i2c.c

@@ -139,14 +139,6 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
 	omap_pm_set_max_mpu_wakeup_lat(dev, t);
 }
 
-static struct omap_device_pm_latency omap_i2c_latency[] = {
-	[0] = {
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -189,7 +181,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
 		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
-			omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
+			NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
 	return PTR_ERR(pdev);

arch/arm/plat-omap/include/plat/common.h

@@ -50,10 +50,13 @@ void omap2430_init_early(void);
 void omap3430_init_early(void);
 void omap35xx_init_early(void);
 void omap3630_init_early(void);
+void omap3_init_early(void);	/* Do not use this one */
 void am35xx_init_early(void);
 void ti816x_init_early(void);
 void omap4430_init_early(void);
 
+void omap_sram_init(void);
+
 /*
  * IO bases for various OMAP processors
  * Except the tap base, rest all the io bases
@@ -62,13 +65,13 @@ void omap4430_init_early(void);
 struct omap_globals {
 	u32		class;		/* OMAP class to detect */
 	void __iomem	*tap;		/* Control module ID code */
-	unsigned long   sdrc;           /* SDRAM Controller */
-	unsigned long   sms;            /* SDRAM Memory Scheduler */
-	unsigned long   ctrl;           /* System Control Module */
-	unsigned long   ctrl_pad;	/* PAD Control Module */
-	unsigned long   prm;            /* Power and Reset Management */
-	unsigned long   cm;             /* Clock Management */
-	unsigned long   cm2;
+	void __iomem	*sdrc;           /* SDRAM Controller */
+	void __iomem	*sms;            /* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;           /* System Control Module */
+	void __iomem	*ctrl_pad;	/* PAD Control Module */
+	void __iomem	*prm;            /* Power and Reset Management */
+	void __iomem	*cm;             /* Clock Management */
+	void __iomem	*cm2;
 };
 
 void omap2_set_globals_242x(void);

arch/arm/plat-omap/include/plat/io.h

@@ -228,13 +228,13 @@
 
 #define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
 						/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
 #define OMAP44XX_EMIF2_SIZE	SZ_1M
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
 
 #define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
 						/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT	(OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
 #define OMAP44XX_DMM_SIZE	SZ_1M
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
 /*
  * ----------------------------------------------------------------------------
  * Omap specific register access
@@ -247,6 +247,8 @@
  * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
 
+void omap_ioremap_init(void);
+
 extern u8 omap_readb(u32 pa);
 extern u16 omap_readw(u32 pa);
 extern u32 omap_readl(u32 pa);
@@ -256,8 +258,31 @@ extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
 
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
 
 #ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);

arch/arm/plat-omap/include/plat/omap_device.h

@@ -101,6 +101,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 int pm_lats_cnt, int is_early_device);
 
 void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,

arch/arm/plat-omap/io.c

@@ -24,11 +24,16 @@
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
 
+static int initialized;
+
 /*
  * Intercept ioremap() requests for addresses in our fixed mapping regions.
  */
 void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 {
+
+	WARN(!initialized, "Do not use ioremap before init_early\n");
+
 #ifdef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap1()) {
 		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
@@ -147,3 +152,8 @@ void __init omap_init_consistent_dma_size(void)
 	init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
 #endif
 }
+
+void __init omap_ioremap_init(void)
+{
+	initialized++;
+}

arch/arm/plat-omap/sram.c

@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
@@ -29,10 +28,8 @@
 #include <plat/sram.h>
 #include <plat/board.h>
 #include <plat/cpu.h>
-#include <plat/vram.h>
 
 #include "sram.h"
-#include "fb.h"
 
 /* XXX These "sideways" includes are a sign that something is wrong */
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
@@ -41,16 +38,9 @@
 #endif
 
 #define OMAP1_SRAM_PA		0x20000000
-#define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
-#define OMAP2_SRAM_VA		0xfe400000
-#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_VA           0xfe400000
 #define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
-#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_VA		0xfe400000
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
-#define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
 #if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -73,9 +63,9 @@
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
 static unsigned long omap_sram_start;
-static unsigned long omap_sram_base;
+static void __iomem *omap_sram_base;
 static unsigned long omap_sram_size;
-static unsigned long omap_sram_ceil;
+static void __iomem *omap_sram_ceil;
 
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
@@ -112,12 +102,9 @@ static int is_sram_locked(void)
  */
 static void __init omap_detect_sram(void)
 {
-	unsigned long reserved;
-
 	if (cpu_class_is_omap2()) {
 		if (is_sram_locked()) {
 			if (cpu_is_omap34xx()) {
-				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
 				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
 				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
@@ -126,25 +113,20 @@ static void __init omap_detect_sram(void)
 					omap_sram_size = 0x8000; /* 32K */
 				}
 			} else if (cpu_is_omap44xx()) {
-				omap_sram_base = OMAP4_SRAM_PUB_VA;
 				omap_sram_start = OMAP4_SRAM_PUB_PA;
 				omap_sram_size = 0xa000; /* 40K */
 			} else {
-				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
 				omap_sram_size = 0x800; /* 2K */
 			}
 		} else {
 			if (cpu_is_omap34xx()) {
-				omap_sram_base = OMAP3_SRAM_VA;
 				omap_sram_start = OMAP3_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
 			} else if (cpu_is_omap44xx()) {
-				omap_sram_base = OMAP4_SRAM_VA;
 				omap_sram_start = OMAP4_SRAM_PA;
 				omap_sram_size = 0xe000; /* 56K */
 			} else {
-				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
 				if (cpu_is_omap242x())
 					omap_sram_size = 0xa0000; /* 640K */
@@ -153,7 +135,6 @@ static void __init omap_detect_sram(void)
 			}
 		}
 	} else {
-		omap_sram_base = OMAP1_SRAM_VA;
 		omap_sram_start = OMAP1_SRAM_PA;
 
 		if (cpu_is_omap7xx())
@@ -170,35 +151,14 @@ static void __init omap_detect_sram(void)
 			omap_sram_size = 0x4000;
 		}
 	}
-	reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
-				       omap_sram_size,
-				       omap_sram_start + SRAM_BOOTLOADER_SZ,
-				       omap_sram_size - SRAM_BOOTLOADER_SZ);
-	omap_sram_size -= reserved;
-
-	reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
-			omap_sram_size,
-			omap_sram_start + SRAM_BOOTLOADER_SZ,
-			omap_sram_size - SRAM_BOOTLOADER_SZ);
-	omap_sram_size -= reserved;
-
-	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
-static struct map_desc omap_sram_io_desc[] __initdata = {
-	{	/* .length gets filled in at runtime */
-		.virtual	= OMAP1_SRAM_VA,
-		.pfn		= __phys_to_pfn(OMAP1_SRAM_PA),
-		.type		= MT_MEMORY
-	}
-};
-
 /*
  * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
 static void __init omap_map_sram(void)
 {
-	unsigned long base;
+	int cached = 1;
 
 	if (omap_sram_size == 0)
 		return;
@@ -211,28 +171,18 @@ static void __init omap_map_sram(void)
 		 * the ARM may attempt to write cache lines back to SDRAM
 		 * which will cause the system to hang.
 		 */
-		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
+		cached = 0;
 	}
 
-	omap_sram_io_desc[0].virtual = omap_sram_base;
-	base = omap_sram_start;
-	base = ROUND_DOWN(base, PAGE_SIZE);
-	omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
-	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
-
-	pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
-		(long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
-		omap_sram_io_desc[0].virtual,
-		omap_sram_io_desc[0].length);
+	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+						cached);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
 
-	/*
-	 * Normally devicemaps_init() would flush caches and tlb after
-	 * mdesc->map_io(), but since we're called from map_io(), we
-	 * must do it here.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
 	/*
 	 * Looks like we need to preserve some bootloader code at the
@@ -251,13 +201,18 @@ static void __init omap_map_sram(void)
  */
 void *omap_sram_push_address(unsigned long size)
 {
-	if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+	if (size > available) {
 		pr_err("Not enough space in SRAM\n");
 		return NULL;
 	}
 
-	omap_sram_ceil -= size;
-	omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
 
 	return (void *)omap_sram_ceil;
 }

drivers/of/base.c

@@ -715,6 +715,90 @@ int of_property_read_string(struct device_node *np, const char *propname,
 }
 EXPORT_SYMBOL_GPL(of_property_read_string);
 
+/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @index:	index of the string in the list of strings
+ * @out_string:	pointer to null terminated return string, modified only if
+ *		return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+				  int index, const char **output)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	int i = 0;
+	size_t l = 0, total = 0;
+	const char *p;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if (strnlen(prop->value, prop->length) >= prop->length)
+		return -EILSEQ;
+
+	p = prop->value;
+
+	for (i = 0; total < prop->length; total += l, p += l) {
+		l = strlen(p) + 1;
+		if ((*p != 0) && (i++ == index)) {
+			*output = p;
+			return 0;
+		}
+	}
+	return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+	int i = 0;
+	size_t l = 0, total = 0;
+	const char *p;
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+	if (strnlen(prop->value, prop->length) >= prop->length)
+		return -EILSEQ;
+
+	p = prop->value;
+
+	for (i = 0; total < prop->length; total += l, p += l) {
+		l = strlen(p) + 1;
+		if (*p != 0)
+			i++;
+	}
+	return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
 /**
  * of_parse_phandle - Resolve a phandle property to a device_node pointer
  * @np: Pointer to device node holding phandle property

include/linux/of.h

@@ -207,6 +207,11 @@ extern int of_property_read_u64(const struct device_node *np,
 extern int of_property_read_string(struct device_node *np,
 				   const char *propname,
 				   const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+					 const char *propname,
+					 int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+				     const char *propname);
 extern int of_device_is_compatible(const struct device_node *device,
 				   const char *);
 extern int of_device_is_available(const struct device_node *device);
@@ -283,6 +288,19 @@ static inline int of_property_read_string(struct device_node *np,
 	return -ENOSYS;
 }
 
+static inline int of_property_read_string_index(struct device_node *np,
+						const char *propname, int index,
+						const char **out_string)
+{
+	return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+					    const char *propname)
+{
+	return -ENOSYS;
+}
+
 static inline const void *of_get_property(const struct device_node *node,
 				const char *name,
 				int *lenp)