Commit 81d4af13 authored by Ivan Kokshaysky's avatar Ivan Kokshaysky Committed by Linus Torvalds

[PATCH] x86: pci_assign_unassigned_resources() update

I had some time to think about PCI assign issues in 2.6.13-rc series.

The major problem here is that we call pci_assign_unassigned_resources()
way too early - at subsys_initcall level. Therefore we give no chances
to ACPI and PnP routines (called at fs_initcall level) to reserve their
respective resources properly, as the comments in drivers/pnp/system.c
and drivers/acpi/motherboard.c suggest:

 /**
  * Reserve motherboard resources after PCI claim BARs,
  * but before PCI assign resources for uninitialized PCI devices
  */

So I moved the pci_assign_unassigned_resources() call to
pcibios_assign_resources() (fs_initcall), which should hopefully fix a
lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary.

Other changes:
- remove resource assignment code from pcibios_assign_resources(), since
  it duplicates pci_assign_unassigned_resources() functionality and
  actually does nothing in 2.6.13;
- modify ROM assignment code as per Ben's suggestion: try to use firmware
  settings by default (if PCI_ASSIGN_ROMS is not set);
- set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for
  various setups.

Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with
the 4kB CardBus IO size previously).
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent ae11be6f
...@@ -165,7 +165,6 @@ static int __init pcibios_init(void) ...@@ -165,7 +165,6 @@ static int __init pcibios_init(void)
if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
pcibios_sort(); pcibios_sort();
#endif #endif
pci_assign_unassigned_resources();
return 0; return 0;
} }
......
...@@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass) ...@@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass)
static int __init pcibios_assign_resources(void) static int __init pcibios_assign_resources(void)
{ {
struct pci_dev *dev = NULL; struct pci_dev *dev = NULL;
int idx; struct resource *r, *pr;
struct resource *r;
for_each_pci_dev(dev) {
int class = dev->class >> 8;
/* Don't touch classless devices and host bridges */
if (!class || class == PCI_CLASS_BRIDGE_HOST)
continue;
for(idx=0; idx<6; idx++) {
r = &dev->resource[idx];
/*
* Don't touch IDE controllers and I/O ports of video cards!
*/
if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
(class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
continue;
/*
* We shall assign a new address to this resource, either because
* the BIOS forgot to do so or because we have decided the old
* address was unusable for some reason.
*/
if (!r->start && r->end)
pci_assign_resource(dev, idx);
}
if (pci_probe & PCI_ASSIGN_ROMS) { if (!(pci_probe & PCI_ASSIGN_ROMS)) {
/* Try to use BIOS settings for ROMs, otherwise let
pci_assign_unassigned_resources() allocate the new
addresses. */
for_each_pci_dev(dev) {
r = &dev->resource[PCI_ROM_RESOURCE]; r = &dev->resource[PCI_ROM_RESOURCE];
r->end -= r->start; if (!r->flags || !r->start)
r->start = 0; continue;
if (r->end) pr = pci_find_parent_resource(dev, r);
pci_assign_resource(dev, PCI_ROM_RESOURCE); if (!pr || request_resource(pr, r) < 0) {
r->end -= r->start;
r->start = 0;
}
} }
} }
pci_assign_unassigned_resources();
return 0; return 0;
} }
......
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
* FIXME: IO should be max 256 bytes. However, since we may * FIXME: IO should be max 256 bytes. However, since we may
* have a P2P bridge below a cardbus bridge, we need 4K. * have a P2P bridge below a cardbus bridge, we need 4K.
*/ */
#define CARDBUS_IO_SIZE (256) #define CARDBUS_IO_SIZE (4*1024)
#define CARDBUS_MEM_SIZE (32*1024*1024) #define CARDBUS_MEM_SIZE (32*1024*1024)
static void __devinit static void __devinit
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment