watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2

The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current
sp5100_tco driver is using bit 2.

See 2.3.3 Power Management (PM) Registers page 150 of the
AMD SB800-Series Southbridges Register Reference Guide [1].

        AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h]
        Field Name        Bits  Default  Description
        AcpiMMioDecodeEn  0     0b       Set to 1 to enable AcpiMMio space.
        AcpiMMIoSel       1     0b       Set AcpiMMio registers to be memory-mapped or IO-mapped space.
                                         0: Memory-mapped space
                                         1: I/O-mapped space

The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1).

Fortunately, no problems were caused by this typo, because the default
value of the undocumented misused bit 2 seems to be zero.

However, the sp5100_tco driver should use the correct bitmask value.

[1] http://support.amd.com/us/Embedded_TechDocs/45482.pdfSigned-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

drivers/watchdog/sp5100_tco.h

@@ -57,7 +57,7 @@
 #define SB800_PM_WATCHDOG_DISABLE	(1 << 2)
 #define SB800_PM_WATCHDOG_SECOND_RES	(3 << 0)
 #define SB800_ACPI_MMIO_DECODE_EN	(1 << 0)
-#define SB800_ACPI_MMIO_SEL		(1 << 2)
+#define SB800_ACPI_MMIO_SEL		(1 << 1)
 
 
 #define SB800_PM_WDT_MMIO_OFFSET	0xB00