staging: brcm80211: removed unused bus code from softmac

Code cleanup. For the softmac, the 'bustype' in use is always PCI_BUS. Hence
code related to dealing with different bus types (eg: PCI_BUS, JTAG_BUS,
SI_BUS) could be removed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmsmac/aiutils.h

@@ -330,10 +330,8 @@
 #define	ILP_DIV_5MHZ		0	/* ILP = 5 MHz */
 #define	ILP_DIV_1MHZ		4	/* ILP = 1 MHz */
 
-#define PCI(si)		(((si)->pub.bustype == PCI_BUS) &&	\
-			 ((si)->pub.buscoretype == PCI_CORE_ID))
-#define PCIE(si)	(((si)->pub.bustype == PCI_BUS) &&	\
-			 ((si)->pub.buscoretype == PCIE_CORE_ID))
+#define PCI(si)		((si)->pub.buscoretype == PCI_CORE_ID)
+#define PCIE(si)	((si)->pub.buscoretype == PCIE_CORE_ID)
 #define PCI_FORCEHT(si)	\
 	(PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID))
 
@@ -351,7 +349,6 @@
  *   public (read-only) portion of aiutils handle returned by si_attach()
  */
 struct si_pub {
-	uint bustype;		/* SI_BUS, PCI_BUS */
 	uint buscoretype;	/* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */
 	uint buscorerev;	/* buscore rev */
 	uint buscoreidx;	/* buscore index */
@@ -518,9 +515,8 @@ extern u32 ai_addrspacesize(struct si_pub *sih, uint asidx);
 extern void ai_write_wrap_reg(struct si_pub *sih, u32 offset, u32 val);
 
 /* === exported functions === */
-extern struct si_pub *ai_attach(void *regs, uint bustype,
-		       void *sdh, char **vars, uint *varsz);
-
+extern struct si_pub *ai_attach(void *regs, void *sdh, char **vars,
+				uint *varsz);
 extern void ai_detach(struct si_pub *sih);
 extern bool ai_pci_war16165(struct si_pub *sih);
 

drivers/staging/brcm80211/brcmsmac/dma.c

@@ -451,14 +451,11 @@ struct dma_pub *dma_attach(char *name, struct si_pub *sih,
 	 */
 	di->ddoffsetlow = 0;
 	di->dataoffsetlow = 0;
-	/* for pci bus, add offset */
-	if (sih->bustype == PCI_BUS) {
-		/* pcie with DMA64 */
+	/* add offset for pcie with DMA64 bus */
 	di->ddoffsetlow = 0;
 	di->ddoffsethigh = SI_PCIE_DMA_H32;
 	di->dataoffsetlow = di->ddoffsetlow;
 	di->dataoffsethigh = di->ddoffsethigh;
-	}
 #if defined(__mips__) && defined(IL_BIGENDIAN)
 	di->dataoffsetlow = di->dataoffsetlow + SI_SDRAM_SWAPPED;
 #endif				/* defined(__mips__) && defined(IL_BIGENDIAN) */

drivers/staging/brcm80211/brcmsmac/mac80211_if.c

@@ -755,7 +755,7 @@ static int brcms_set_hint(struct brcms_info *wl, char *abbrev)
  */
 static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 				       unsigned long regs,
-			    uint bustype, void *btparam, uint irq)
+				       void *btparam, uint irq)
 {
 	struct brcms_info *wl = NULL;
 	int unit, err;
@@ -786,14 +786,6 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 
 	base_addr = regs;
 
-	if (bustype == PCI_BUS || bustype == RPC_BUS) {
-		/* Do nothing */
-	} else {
-		bustype = PCI_BUS;
-		BCMMSG(wl->wiphy, "force to PCI\n");
-	}
-	wl->bcm_bustype = bustype;
-
 	wl->regsva = ioremap_nocache(base_addr, PCI_BAR0_WINSZ);
 	if (wl->regsva == NULL) {
 		wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit);
@@ -813,7 +805,7 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device,
 
 	/* common load-time initialization */
 	wl->wlc = brcms_c_attach((void *)wl, vendor, device, unit, false,
-			     wl->regsva, wl->bcm_bustype, btparam, &err);
+				 wl->regsva, btparam, &err);
 	brcms_release_fw(wl);
 	if (!wl->wlc) {
 		wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
@@ -1156,7 +1148,7 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memset(hw->priv, 0, sizeof(*wl));
 
 	wl = brcms_attach(pdev->vendor, pdev->device,
-			  pci_resource_start(pdev, 0), PCI_BUS, pdev,
+			  pci_resource_start(pdev, 0), pdev,
 			  pdev->irq);
 
 	if (!wl) {
@@ -1373,8 +1365,7 @@ static void brcms_free(struct brcms_info *wl)
 	 * registers so we cannot unmap the chip registers until
 	 * after calling unregister_netdev() .
 	 */
-	if (wl->regsva && wl->bcm_bustype != SDIO_BUS &&
-	    wl->bcm_bustype != JTAG_BUS)
+	if (wl->regsva)
 		iounmap((void *)wl->regsva);
 
 	wl->regsva = NULL;

drivers/staging/brcm80211/brcmsmac/mac80211_if.h

@@ -60,8 +60,7 @@ struct brcms_info {
 	spinlock_t lock;	/* per-device perimeter lock */
 	spinlock_t isr_lock;	/* per-device ISR synchronization lock */
 
-	/* bus type and regsva for unmap in brcms_free() */
-	uint bcm_bustype;	/* bus type */
+	/* regsva for unmap in brcms_free() */
 	void *regsva;		/* opaque chip registers virtual address */
 
 	/* timer related fields */

drivers/staging/brcm80211/brcmsmac/main.c

@@ -181,8 +181,7 @@
  */
 #define BCMCFID(wlc, fid) brcms_b_write_shm((wlc)->hw, M_BCMC_FID, (fid))
 
-#define BRCMS_WAR16165(wlc) (wlc->pub->sih->bustype == PCI_BUS && \
-				(!AP_ENAB(wlc->pub)) && (wlc->war16165))
+#define BRCMS_WAR16165(wlc) ((!AP_ENAB(wlc->pub)) && (wlc->war16165))
 
 /* Find basic rate for a given rate */
 #define BRCMS_BASIC_RATE(wlc, rspec) \
@@ -313,7 +312,7 @@ static void brcms_b_tx_fifo_resume(struct brcms_hardware *wlc_hw,
 struct brcms_b_state;
 
 static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
-			   uint unit, bool piomode, void *regsva, uint bustype,
+			  uint unit, bool piomode, void *regsva,
 			  void *btparam);
 
 /* up/down, reset, clk */
@@ -4302,7 +4301,7 @@ struct brcms_pub *brcms_c_pub(void *wlc)
  *    put the whole chip in reset(driver down state), no clock
  */
 int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
-		    bool piomode, void *regsva, uint bustype, void *btparam)
+		   bool piomode, void *regsva, void *btparam)
 {
 	struct brcms_hardware *wlc_hw;
 	struct d11regs *regs;
@@ -4313,6 +4312,8 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	bool wme = false;
 	struct shared_phy_params sha_params;
 	struct wiphy *wiphy = wlc->wiphy;
+	char *var;
+	unsigned long res;
 
 	BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, vendor,
 		device);
@@ -4332,7 +4333,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	 * Do the hardware portion of the attach. Also initialize software
 	 * state that depends on the particular hardware we are running.
 	 */
-	wlc_hw->sih = ai_attach(regsva, bustype, btparam,
+	wlc_hw->sih = ai_attach(regsva, btparam,
 				&wlc_hw->vars, &wlc_hw->vars_size);
 	if (wlc_hw->sih == NULL) {
 		wiphy_err(wiphy, "wl%d: brcms_b_attach: si_attach failed\n",
@@ -4347,13 +4348,6 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	 * than those the BIOS recognizes for devices on PCMCIA_BUS,
 	 * SDIO_BUS, and SROMless devices on PCI_BUS.
 	 */
-#ifdef BCMBUSTYPE
-	bustype = BCMBUSTYPE;
-#endif
-	if (bustype != SI_BUS) {
-		char *var;
-		unsigned long res;
-
 	var = getvar(vars, "vendid");
 	if (var && !kstrtoul(var, 0, &res)) {
 		vendor = (u16)res;
@@ -4378,7 +4372,6 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 		err = 12;
 		goto fail;
 	}
-	}
 
 	wlc_hw->vendorid = vendor;
 	wlc_hw->deviceid = device;
@@ -4437,8 +4430,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	if (wlc_hw->boardflags & BFL_NOPLLDOWN)
 		brcms_b_pllreq(wlc_hw, true, BRCMS_PLLREQ_SHARED);
 
-	if ((wlc_hw->sih->bustype == PCI_BUS)
-	    && (ai_pci_war16165(wlc_hw->sih)))
+	if (ai_pci_war16165(wlc_hw->sih))
 		wlc->war16165 = true;
 
 	/* check device id(srom, nvram etc.) to set bands */
@@ -4491,7 +4483,6 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	sha_params.boardvendor = wlc_hw->sih->boardvendor;
 	sha_params.boardflags = wlc_hw->boardflags;
 	sha_params.boardflags2 = wlc_hw->boardflags2;
-	sha_params.bustype = wlc_hw->sih->bustype;
 	sha_params.buscorerev = wlc_hw->sih->buscorerev;
 
 	/* alloc and save pointer to shared phy state area */
@@ -4601,7 +4592,6 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
 	brcms_c_coredisable(wlc_hw);
 
 	/* Match driver "down" state */
-	if (wlc_hw->sih->bustype == PCI_BUS)
 	ai_pci_down(wlc_hw->sih);
 
 	/* register sb interrupt callback functions */
@@ -4655,8 +4645,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit,
  * The common driver entry routine. Error codes should be unique
  */
 void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
-		 bool piomode, void *regsva, uint bustype, void *btparam,
-		 uint *perr)
+		 bool piomode, void *regsva, void *btparam, uint *perr)
 {
 	struct brcms_c_info *wlc;
 	uint err = 0;
@@ -4696,7 +4685,7 @@ void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
 	 * inside, no more in rest of the attach)
 	 */
 	err = brcms_b_attach(wlc, vendor, device, unit, piomode, regsva,
-			      bustype, btparam);
+			     btparam);
 	if (err)
 		goto fail;
 
@@ -5030,8 +5019,6 @@ int brcms_b_detach(struct brcms_c_info *wlc)
 		 * be done before sb core switch
 		 */
 		ai_deregister_intr_callback(wlc_hw->sih);
-
-		if (wlc_hw->sih->bustype == PCI_BUS)
 		ai_pci_sleep(wlc_hw->sih);
 	}
 
@@ -5416,7 +5403,6 @@ void brcms_b_hw_up(struct brcms_hardware *wlc_hw)
 	ai_clkctl_init(wlc_hw->sih);
 	brcms_b_clkctl_clk(wlc_hw, CLK_FAST);
 
-	if (wlc_hw->sih->bustype == PCI_BUS) {
 	ai_pci_fixcfg(wlc_hw->sih);
 
 	/*
@@ -5427,7 +5413,6 @@ void brcms_b_hw_up(struct brcms_hardware *wlc_hw)
 	    (wlc_hw->sih->chip == BCM43225_CHIP_ID))
 		wlc_hw->regs = (struct d11regs *)
 				ai_setcore(wlc_hw->sih, D11_CORE_ID, 0);
-	}
 
 	/*
 	 * Inform phy that a POR reset has occurred so
@@ -5467,7 +5452,6 @@ int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
 	 */
 	coremask = (1 << wlc_hw->wlc->core->coreidx);
 
-	if (wlc_hw->sih->bustype == PCI_BUS)
 	ai_pci_setup(wlc_hw->sih, coremask);
 
 	/*
@@ -5477,13 +5461,11 @@ int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
 	 */
 	if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
 		/* put SB PCI in down state again */
-		if (wlc_hw->sih->bustype == PCI_BUS)
 		ai_pci_down(wlc_hw->sih);
 		brcms_b_xtal(wlc_hw, OFF);
 		return -ENOMEDIUM;
 	}
 
-	if (wlc_hw->sih->bustype == PCI_BUS)
 	ai_pci_up(wlc_hw->sih);
 
 	/* reset the d11 core */
@@ -5707,7 +5689,6 @@ int brcms_b_down_finish(struct brcms_hardware *wlc_hw)
 
 		/* turn off primary xtal and pll */
 		if (!wlc_hw->noreset) {
-			if (wlc_hw->sih->bustype == PCI_BUS)
 			ai_pci_down(wlc_hw->sih);
 			brcms_b_xtal(wlc_hw, OFF);
 		}

drivers/staging/brcm80211/brcmsmac/nicpci.c

@@ -213,9 +213,7 @@ struct pcicore_info {
 
 /* debug/trace */
 #define	PCI_ERROR(args)
-#define PCIE_PUB(sih)							\
-	(((sih)->bustype == PCI_BUS) &&					\
-	 ((sih)->buscoretype == PCIE_CORE_ID))
+#define PCIE_PUB(sih) ((sih)->buscoretype == PCIE_CORE_ID)
 
 /* routines to access mdio slave device registers */
 static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk);

drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c

@@ -279,12 +279,10 @@ void write_radio_reg(struct brcms_phy *pi, u16 addr, u16 val)
 		W_REG(&pi->regs->phy4wdatalo, val);
 	}
 
-	if (pi->sh->bustype == PCI_BUS) {
 	if (++pi->phy_wreg >= pi->phy_wreg_limit) {
 		(void)R_REG(&pi->regs->maccontrol);
 		pi->phy_wreg = 0;
 	}
-	}
 }
 
 static u32 read_radio_id(struct brcms_phy *pi)
@@ -390,12 +388,10 @@ void write_phy_reg(struct brcms_phy *pi, u16 addr, u16 val)
 #else
 	W_REG((u32 *)(&regs->phyregaddr),
 	      addr | (val << 16));
-	if (pi->sh->bustype == PCI_BUS) {
 	if (++pi->phy_wreg >= pi->phy_wreg_limit) {
 		pi->phy_wreg = 0;
 		(void)R_REG(&regs->phyversion);
 	}
-	}
 #endif
 }
 
@@ -496,7 +492,6 @@ struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp)
 	sh->boardvendor = shp->boardvendor;
 	sh->boardflags = shp->boardflags;
 	sh->boardflags2 = shp->boardflags2;
-	sh->bustype = shp->bustype;
 	sh->buscorerev = shp->buscorerev;
 
 	sh->fast_timer = PHY_SW_TIMER_FAST;

drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h

@@ -166,7 +166,6 @@ struct shared_phy_params {
 	struct phy_shim_info *physhim;
 	uint unit;
 	uint corerev;
-	uint bustype;
 	uint buscorerev;
 	char *vars;
 	u16 vid;

drivers/staging/brcm80211/brcmsmac/phy/phy_int.h

@@ -565,7 +565,6 @@ struct shared_phy {
 	uint boardvendor;
 	u32 boardflags;
 	u32 boardflags2;
-	uint bustype;
 	uint buscorerev;
 	uint fast_timer;
 	uint slow_timer;
@@ -1182,7 +1181,7 @@ extern void wlc_phy_table_write_nphy(struct brcms_phy *pi, u32, u32, u32,
 	 (pi->ipa5g_on && CHSPEC_IS5G(pi->radio_chanspec)))
 
 #define BRCMS_PHY_WAR_PR51571(pi) \
-	if (((pi)->sh->bustype == PCI_BUS) && NREV_LT((pi)->pubpi.phy_rev, 3)) \
+	if (NREV_LT((pi)->pubpi.phy_rev, 3)) \
 		(void)R_REG(&(pi)->regs->maccontrol)
 
 extern void wlc_phy_cal_perical_nphy_run(struct brcms_phy *pi, u8 caltype);

drivers/staging/brcm80211/brcmsmac/pub.h

@@ -550,7 +550,7 @@ struct brcms_antselcfg {
 
 /* common functions for every port */
 extern void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device,
-			uint unit, bool piomode, void *regsva, uint bustype,
+			uint unit, bool piomode, void *regsva,
 			void *btparam, uint *perr);
 extern uint brcms_c_detach(struct brcms_c_info *wlc);
 extern int brcms_c_up(struct brcms_c_info *wlc);

drivers/staging/brcm80211/brcmsmac/srom.c

@@ -860,8 +860,7 @@ static int varbuf_append(struct brcms_varbuf *b, const char *fmt, ...)
  * Initialize local vars from the right source for this platform.
  * Return 0 on success, nonzero on error.
  */
-int srom_var_init(struct si_pub *sih, uint bustype, void *curmap,
-		  char **vars, uint *count)
+int srom_var_init(struct si_pub *sih, void *curmap, char **vars, uint *count)
 {
 	uint len;
 
@@ -873,7 +872,7 @@ int srom_var_init(struct si_pub *sih, uint bustype, void *curmap,
 	*vars = NULL;
 	*count = 0;
 
-	if (curmap != NULL && bustype == PCI_BUS)
+	if (curmap != NULL)
 		return initvars_srom_pci(sih, curmap, vars, count);
 
 	return -EINVAL;

drivers/staging/brcm80211/brcmsmac/srom.h

@@ -20,8 +20,8 @@
 #include "types.h"
 
 /* Prototypes */
-extern int srom_var_init(struct si_pub *sih, uint bus, void *curmap,
-			 char **vars, uint *count);
+extern int srom_var_init(struct si_pub *sih, void *curmap, char **vars,
+			 uint *count);
 
 extern int srom_read(struct si_pub *sih, uint bus, void *curmap,
 		     uint byteoff, uint nbytes, u16 *buf, bool check_crc);

drivers/staging/brcm80211/brcmsmac/types.h

@@ -20,14 +20,13 @@
 #include <linux/types.h>
 #include <linux/io.h>
 
+#if 0
 /* Bus types */
-#define	SI_BUS			0	/* SOC Interconnect */
-#define	PCI_BUS			1	/* PCI target */
 #define SDIO_BUS		3	/* SDIO target */
-#define JTAG_BUS		4	/* JTAG */
 #define USB_BUS			5	/* USB (does not support R/W REG) */
 #define SPI_BUS			6	/* gSPI target */
 #define RPC_BUS			7	/* RPC target */
+#endif
 
 #define WL_CHAN_FREQ_RANGE_2G      0
 #define WL_CHAN_FREQ_RANGE_5GL     1