Merge tag 'efi-urgent' of...

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

" - Leave a valid 64-bit IDT installed during runtime EFI mixed mode
    calls to avoid triple faults if an NMI/MCE is received.

  - Revert Ard's change to the libstub get_memory_map() that went into
    the v3.20 merge window because it causes boot regressions on Qemu and
    Xen. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/boot/compressed/Makefile

@@ -49,6 +49,7 @@ $(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
 
 vmlinux-objs-$(CONFIG_EFI_STUB) += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o \
 	$(objtree)/drivers/firmware/efi/libstub/lib.a
+vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
 
 $(obj)/vmlinux: $(vmlinux-objs-y) FORCE
 	$(call if_changed,ld)

arch/x86/boot/compressed/efi_stub_64.S

@@ -3,28 +3,3 @@
 #include <asm/processor-flags.h>
 
 #include "../../platform/efi/efi_stub_64.S"
-
-#ifdef CONFIG_EFI_MIXED
-	.code64
-	.text
-ENTRY(efi64_thunk)
-	push	%rbp
-	push	%rbx
-
-	subq	$16, %rsp
-	leaq	efi_exit32(%rip), %rax
-	movl	%eax, 8(%rsp)
-	leaq	efi_gdt64(%rip), %rax
-	movl	%eax, 4(%rsp)
-	movl	%eax, 2(%rax)		/* Fixup the gdt base address */
-	leaq	efi32_boot_gdt(%rip), %rax
-	movl	%eax, (%rsp)
-
-	call	__efi64_thunk
-
-	addq	$16, %rsp
-	pop	%rbx
-	pop	%rbp
-	ret
-ENDPROC(efi64_thunk)
-#endif /* CONFIG_EFI_MIXED */

arch/x86/boot/compressed/efi_thunk_64.S

+/*
+ * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming
+ *
+ * Early support for invoking 32-bit EFI services from a 64-bit kernel.
+ *
+ * Because this thunking occurs before ExitBootServices() we have to
+ * restore the firmware's 32-bit GDT before we make EFI serivce calls,
+ * since the firmware's 32-bit IDT is still currently installed and it
+ * needs to be able to service interrupts.
+ *
+ * On the plus side, we don't have to worry about mangling 64-bit
+ * addresses into 32-bits because we're executing with an identify
+ * mapped pagetable and haven't transitioned to 64-bit virtual addresses
+ * yet.
+ */
+
+#include <linux/linkage.h>
+#include <asm/msr.h>
+#include <asm/page_types.h>
+#include <asm/processor-flags.h>
+#include <asm/segment.h>
+
+	.code64
+	.text
+ENTRY(efi64_thunk)
+	push	%rbp
+	push	%rbx
+
+	subq	$8, %rsp
+	leaq	efi_exit32(%rip), %rax
+	movl	%eax, 4(%rsp)
+	leaq	efi_gdt64(%rip), %rax
+	movl	%eax, (%rsp)
+	movl	%eax, 2(%rax)		/* Fixup the gdt base address */
+
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	/*
+	 * Convert x86-64 ABI params to i386 ABI
+	 */
+	subq	$32, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movq	%r8, %rsi
+	movl	%esi, 0xc(%rsp)
+	movq	%r9, %rsi
+	movl	%esi,  0x10(%rsp)
+
+	sgdt	save_gdt(%rip)
+
+	leaq	1f(%rip), %rbx
+	movq	%rbx, func_rt_ptr(%rip)
+
+	/*
+	 * Switch to gdt with 32-bit segments. This is the firmware GDT
+	 * that was installed when the kernel started executing. This
+	 * pointer was saved at the EFI stub entry point in head_64.S.
+	 */
+	leaq	efi32_boot_gdt(%rip), %rax
+	lgdt	(%rax)
+
+	pushq	$__KERNEL_CS
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$32, %rsp
+
+	lgdt	save_gdt(%rip)
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
+
+	/*
+	 * Convert 32-bit status code into 64-bit.
+	 */
+	test	%rax, %rax
+	jz	1f
+	movl	%eax, %ecx
+	andl	$0x0fffffff, %ecx
+	andl	$0xf0000000, %eax
+	shl	$32, %rax
+	or	%rcx, %rax
+1:
+	addq	$8, %rsp
+	pop	%rbx
+	pop	%rbp
+	ret
+ENDPROC(efi64_thunk)
+
+ENTRY(efi_exit32)
+	movq	func_rt_ptr(%rip), %rax
+	push	%rax
+	mov	%rdi, %rax
+	ret
+ENDPROC(efi_exit32)
+
+	.code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+	/* Reload pgtables */
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	/* Disable paging */
+	movl	%cr0, %eax
+	btrl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+
+	/* Disable long mode via EFER */
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btrl	$_EFER_LME, %eax
+	wrmsr
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	/*
+	 * Some firmware will return with interrupts enabled. Be sure to
+	 * disable them before we switch GDTs.
+	 */
+	cli
+
+	movl	56(%esp), %eax
+	movl	%eax, 2(%eax)
+	lgdtl	(%eax)
+
+	movl	%cr4, %eax
+	btsl	$(X86_CR4_PAE_BIT), %eax
+	movl	%eax, %cr4
+
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+
+	movl	$MSR_EFER, %ecx
+	rdmsr
+	btsl	$_EFER_LME, %eax
+	wrmsr
+
+	xorl	%eax, %eax
+	lldt	%ax
+
+	movl	60(%esp), %eax
+	pushl	$__KERNEL_CS
+	pushl	%eax
+
+	/* Enable paging */
+	movl	%cr0, %eax
+	btsl	$X86_CR0_PG_BIT, %eax
+	movl	%eax, %cr0
+	lret
+ENDPROC(efi_enter32)
+
+	.data
+	.balign	8
+	.global	efi32_boot_gdt
+efi32_boot_gdt:	.word	0
+		.quad	0
+
+save_gdt:	.word	0
+		.quad	0
+func_rt_ptr:	.quad	0
+
+	.global efi_gdt64
+efi_gdt64:
+	.word	efi_gdt64_end - efi_gdt64
+	.long	0			/* Filled out by user */
+	.word	0
+	.quad	0x0000000000000000	/* NULL descriptor */
+	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
+	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
+	.quad	0x0080890000000000	/* TS descriptor */
+	.quad   0x0000000000000000	/* TS continued */
+efi_gdt64_end:

arch/x86/platform/efi/efi_stub_64.S

@@ -91,167 +91,6 @@ ENTRY(efi_call)
 	ret
 ENDPROC(efi_call)
 
-#ifdef CONFIG_EFI_MIXED
-
-/*
- * We run this function from the 1:1 mapping.
- *
- * This function must be invoked with a 1:1 mapped stack.
- */
-ENTRY(__efi64_thunk)
-	movl	%ds, %eax
-	push	%rax
-	movl	%es, %eax
-	push	%rax
-	movl	%ss, %eax
-	push	%rax
-
-	subq	$32, %rsp
-	movl	%esi, 0x0(%rsp)
-	movl	%edx, 0x4(%rsp)
-	movl	%ecx, 0x8(%rsp)
-	movq	%r8, %rsi
-	movl	%esi, 0xc(%rsp)
-	movq	%r9, %rsi
-	movl	%esi,  0x10(%rsp)
-
-	sgdt	save_gdt(%rip)
-
-	leaq	1f(%rip), %rbx
-	movq	%rbx, func_rt_ptr(%rip)
-
-	/* Switch to gdt with 32-bit segments */
-	movl	64(%rsp), %eax
-	lgdt	(%rax)
-
-	leaq	efi_enter32(%rip), %rax
-	pushq	$__KERNEL_CS
-	pushq	%rax
-	lretq
-
-1:	addq	$32, %rsp
-
-	lgdt	save_gdt(%rip)
-
-	pop	%rbx
-	movl	%ebx, %ss
-	pop	%rbx
-	movl	%ebx, %es
-	pop	%rbx
-	movl	%ebx, %ds
-
-	/*
-	 * Convert 32-bit status code into 64-bit.
-	 */
-	test	%rax, %rax
-	jz	1f
-	movl	%eax, %ecx
-	andl	$0x0fffffff, %ecx
-	andl	$0xf0000000, %eax
-	shl	$32, %rax
-	or	%rcx, %rax
-1:
-	ret
-ENDPROC(__efi64_thunk)
-
-ENTRY(efi_exit32)
-	movq	func_rt_ptr(%rip), %rax
-	push	%rax
-	mov	%rdi, %rax
-	ret
-ENDPROC(efi_exit32)
-
-	.code32
-/*
- * EFI service pointer must be in %edi.
- *
- * The stack should represent the 32-bit calling convention.
- */
-ENTRY(efi_enter32)
-	movl	$__KERNEL_DS, %eax
-	movl	%eax, %ds
-	movl	%eax, %es
-	movl	%eax, %ss
-
-	/* Reload pgtables */
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	/* Disable paging */
-	movl	%cr0, %eax
-	btrl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-
-	/* Disable long mode via EFER */
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btrl	$_EFER_LME, %eax
-	wrmsr
-
-	call	*%edi
-
-	/* We must preserve return value */
-	movl	%eax, %edi
-
-	/*
-	 * Some firmware will return with interrupts enabled. Be sure to
-	 * disable them before we switch GDTs.
-	 */
-	cli
-
-	movl	68(%esp), %eax
-	movl	%eax, 2(%eax)
-	lgdtl	(%eax)
-
-	movl	%cr4, %eax
-	btsl	$(X86_CR4_PAE_BIT), %eax
-	movl	%eax, %cr4
-
-	movl	%cr3, %eax
-	movl	%eax, %cr3
-
-	movl	$MSR_EFER, %ecx
-	rdmsr
-	btsl	$_EFER_LME, %eax
-	wrmsr
-
-	xorl	%eax, %eax
-	lldt	%ax
-
-	movl	72(%esp), %eax
-	pushl	$__KERNEL_CS
-	pushl	%eax
-
-	/* Enable paging */
-	movl	%cr0, %eax
-	btsl	$X86_CR0_PG_BIT, %eax
-	movl	%eax, %cr0
-	lret
-ENDPROC(efi_enter32)
-
-	.data
-	.balign	8
-	.global	efi32_boot_gdt
-efi32_boot_gdt:	.word	0
-		.quad	0
-
-save_gdt:	.word	0
-		.quad	0
-func_rt_ptr:	.quad	0
-
-	.global efi_gdt64
-efi_gdt64:
-	.word	efi_gdt64_end - efi_gdt64
-	.long	0			/* Filled out by user */
-	.word	0
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00af9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf92000000ffff	/* __KERNEL_DS */
-	.quad	0x0080890000000000	/* TS descriptor */
-	.quad   0x0000000000000000	/* TS continued */
-efi_gdt64_end:
-#endif /* CONFIG_EFI_MIXED */
-
 	.data
 ENTRY(efi_scratch)
 	.fill 3,8,0

arch/x86/platform/efi/efi_thunk_64.S

 /*
  * Copyright (C) 2014 Intel Corporation; author Matt Fleming
+ *
+ * Support for invoking 32-bit EFI runtime services from a 64-bit
+ * kernel.
+ *
+ * The below thunking functions are only used after ExitBootServices()
+ * has been called. This simplifies things considerably as compared with
+ * the early EFI thunking because we can leave all the kernel state
+ * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime
+ * services from __KERNEL32_CS. This means we can continue to service
+ * interrupts across an EFI mixed mode call.
+ *
+ * We do however, need to handle the fact that we're running in a full
+ * 64-bit virtual address space. Things like the stack and instruction
+ * addresses need to be accessible by the 32-bit firmware, so we rely on
+ * using the identity mappings in the EFI page table to access the stack
+ * and kernel text (see efi_setup_page_tables()).
  */
 
 #include <linux/linkage.h>
 #include <asm/page_types.h>
+#include <asm/segment.h>
 
 	.text
 	.code64
@@ -33,14 +50,6 @@ ENTRY(efi64_thunk)
 	leaq	efi_exit32(%rip), %rbx
 	subq	%rax, %rbx
 	movl	%ebx, 8(%rsp)
-	leaq	efi_gdt64(%rip), %rbx
-	subq	%rax, %rbx
-	movl	%ebx, 2(%ebx)
-	movl	%ebx, 4(%rsp)
-	leaq	efi_gdt32(%rip), %rbx
-	subq	%rax, %rbx
-	movl	%ebx, 2(%ebx)
-	movl	%ebx, (%rsp)
 
 	leaq	__efi64_thunk(%rip), %rbx
 	subq	%rax, %rbx
@@ -52,14 +61,92 @@ ENTRY(efi64_thunk)
 	retq
 ENDPROC(efi64_thunk)
 
-	.data
-efi_gdt32:
-	.word 	efi_gdt32_end - efi_gdt32
-	.long	0			/* Filled out above */
-	.word	0
-	.quad	0x0000000000000000	/* NULL descriptor */
-	.quad	0x00cf9a000000ffff	/* __KERNEL_CS */
-	.quad	0x00cf93000000ffff	/* __KERNEL_DS */
-efi_gdt32_end:
+/*
+ * We run this function from the 1:1 mapping.
+ *
+ * This function must be invoked with a 1:1 mapped stack.
+ */
+ENTRY(__efi64_thunk)
+	movl	%ds, %eax
+	push	%rax
+	movl	%es, %eax
+	push	%rax
+	movl	%ss, %eax
+	push	%rax
+
+	subq	$32, %rsp
+	movl	%esi, 0x0(%rsp)
+	movl	%edx, 0x4(%rsp)
+	movl	%ecx, 0x8(%rsp)
+	movq	%r8, %rsi
+	movl	%esi, 0xc(%rsp)
+	movq	%r9, %rsi
+	movl	%esi,  0x10(%rsp)
+
+	leaq	1f(%rip), %rbx
+	movq	%rbx, func_rt_ptr(%rip)
+
+	/* Switch to 32-bit descriptor */
+	pushq	$__KERNEL32_CS
+	leaq	efi_enter32(%rip), %rax
+	pushq	%rax
+	lretq
+
+1:	addq	$32, %rsp
+
+	pop	%rbx
+	movl	%ebx, %ss
+	pop	%rbx
+	movl	%ebx, %es
+	pop	%rbx
+	movl	%ebx, %ds
 
+	/*
+	 * Convert 32-bit status code into 64-bit.
+	 */
+	test	%rax, %rax
+	jz	1f
+	movl	%eax, %ecx
+	andl	$0x0fffffff, %ecx
+	andl	$0xf0000000, %eax
+	shl	$32, %rax
+	or	%rcx, %rax
+1:
+	ret
+ENDPROC(__efi64_thunk)
+
+ENTRY(efi_exit32)
+	movq	func_rt_ptr(%rip), %rax
+	push	%rax
+	mov	%rdi, %rax
+	ret
+ENDPROC(efi_exit32)
+
+	.code32
+/*
+ * EFI service pointer must be in %edi.
+ *
+ * The stack should represent the 32-bit calling convention.
+ */
+ENTRY(efi_enter32)
+	movl	$__KERNEL_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %ss
+
+	call	*%edi
+
+	/* We must preserve return value */
+	movl	%eax, %edi
+
+	movl	72(%esp), %eax
+	pushl	$__KERNEL_CS
+	pushl	%eax
+
+	lret
+ENDPROC(efi_enter32)
+
+	.data
+	.balign	8
+func_rt_ptr:		.quad 0
 efi_saved_sp:		.quad 0

drivers/firmware/efi/libstub/efi-stub-helper.c

@@ -66,29 +66,25 @@ efi_status_t efi_get_memory_map(efi_system_table_t *sys_table_arg,
 	unsigned long key;
 	u32 desc_version;
 
-	*map_size = 0;
-	*desc_size = 0;
-	key = 0;
-	status = efi_call_early(get_memory_map, map_size, NULL,
-				&key, desc_size, &desc_version);
-	if (status != EFI_BUFFER_TOO_SMALL)
-		return EFI_LOAD_ERROR;
-
+	*map_size = sizeof(*m) * 32;
+again:
 	/*
 	 * Add an additional efi_memory_desc_t because we're doing an
 	 * allocation which may be in a new descriptor region.
 	 */
-	*map_size += *desc_size;
+	*map_size += sizeof(*m);
 	status = efi_call_early(allocate_pool, EFI_LOADER_DATA,
 				*map_size, (void **)&m);
 	if (status != EFI_SUCCESS)
 		goto fail;
 
+	*desc_size = 0;
+	key = 0;
 	status = efi_call_early(get_memory_map, map_size, m,
 				&key, desc_size, &desc_version);
 	if (status == EFI_BUFFER_TOO_SMALL) {
 		efi_call_early(free_pool, m);
-		return EFI_LOAD_ERROR;
+		goto again;
 	}
 
 	if (status != EFI_SUCCESS)