[PATCH] new kernel configuration 7/7

This adds the remaining config files.

crypto/Kconfig

+#
+# Cryptographic API Configuration
+#
+
+menu "Cryptographic options"
+
+config CRYPTO
+	bool "Cryptographic API"
+	help
+	  This option provides the core Cryptographic API.
+
+config CRYPTO_MD4
+	tristate "MD4 digest algorithm"
+	depends on CRYPTO
+	help
+	  MD4 message digest algorithm (RFC1320), including HMAC (RFC2104).
+	  
+
+config CRYPTO_MD5
+	tristate "MD5 digest algorithm"
+	depends on CRYPTO
+	help
+	  MD5 message digest algorithm (RFC1321), including HMAC (RFC2104, RFC2403).
+
+config CRYPTO_SHA1
+	tristate "SHA-1 digest algorithm"
+	depends on CRYPTO
+	help
+	  SHA-1 secure hash standard (FIPS 180-1), including HMAC (RFC2104, RFC2404).
+
+config CRYPTO_DES
+	tristate "DES and Triple DES EDE cipher algorithms"
+	depends on CRYPTO
+	help
+	  DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+config CRYPTO_TEST
+	tristate "Testing module"
+	depends on CRYPTO
+	help
+	  Quick & dirty crypto test module.
+
+endmenu
+

fs/Kconfig

+#
+# File system configuration
+#
+
+menu "File systems"
+
+config QUOTA
+	bool "Quota support"
+	help
+	  If you say Y here, you will be able to set per user limits for disk
+	  usage (also called disk quotas). Currently, it works for the
+	  ext2, ext3, and reiserfs file system. You need additional software
+	  in order to use quota support (you can download sources from
+	  <http://www.sf.net/projects/linuxquota/>). For further details, read
+	  the Quota mini-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>. Probably the quota
+	  support is only useful for multi user systems. If unsure, say N.
+
+config QFMT_V1
+	tristate "Old quota format support"
+	depends on QUOTA
+	help
+	  This quota format was (is) used by kernels earlier than 2.4.??. If
+	  you have quota working and you don't want to convert to new quota
+	  format say Y here.
+
+config QFMT_V2
+	tristate "Quota format v2 support"
+	depends on QUOTA
+	help
+	  This quota format allows using quotas with 32-bit UIDs/GIDs. If you
+	  need this functionality say Y here. Note that you will need latest
+	  quota utilities for new quota format with this kernel.
+
+config QUOTACTL
+	bool
+	depends on XFS_QUOTA || QUOTA
+	default y
+
+config AUTOFS_FS
+	tristate "Kernel automounter support"
+	---help---
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from the autofs
+	  package; you can find the location in <file:Documentation/Changes>.
+	  You also want to answer Y to "NFS file system support", below.
+
+	  If you want to use the newer version of the automounter with more
+	  features, say N here and say Y to "Kernel automounter v4 support",
+	  below.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called autofs.o.
+
+	  If you are not a part of a fairly large, distributed network, you
+	  probably do not need an automounter, and can say N here.
+
+config AUTOFS4_FS
+	tristate "Kernel automounter version 4 support (also supports v3)"
+	---help---
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from
+	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/testing-v4/>; you also
+	  want to answer Y to "NFS file system support", below.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called autofs4.o.  You will need to add "alias autofs
+	  autofs4" to your modules configuration file.
+
+	  If you are not a part of a fairly large, distributed network or
+	  don't have a laptop which needs to dynamically reconfigure to the
+	  local network, you probably do not need an automounter, and can say
+	  N here.
+
+config REISERFS_FS
+	tristate "Reiserfs support"
+	---help---
+	  Stores not just filenames but the files themselves in a balanced
+	  tree.  Uses journaling.
+
+	  Balanced trees are more efficient than traditional file system
+	  architectural foundations.
+
+	  In general, ReiserFS is as fast as ext2, but is very efficient with
+	  large directories and small files.  Additional patches are needed
+	  for NFS and quotas, please see <http://www.reiserfs.org/> for links.
+
+	  It is more easily extended to have features currently found in
+	  database and keyword search systems than block allocation based file
+	  systems are.  The next version will be so extended, and will support
+	  plugins consistent with our motto ``It takes more than a license to
+	  make source code open.''
+
+	  Read <http://www.reiserfs.org/> to learn more about reiserfs.
+
+	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+	  If you like it, you can pay us to add new features to it that you
+	  need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+	bool "Enable reiserfs debug mode"
+	depends on REISERFS_FS
+	help
+	  If you set this to Y, then ReiserFS will perform every check it can
+	  possibly imagine of its internal consistency throughout its
+	  operation.  It will also go substantially slower.  More than once we
+	  have forgotten that this was on, and then gone despondent over the
+	  latest benchmarks.:-) Use of this option allows our team to go all
+	  out in checking for consistency when debugging without fear of its
+	  effect on end users.  If you are on the verge of sending in a bug
+	  report, say Y and you might get a useful error message.  Almost
+	  everyone should say N.
+
+config REISERFS_PROC_INFO
+	bool "Stats in /proc/fs/reiserfs"
+	depends on REISERFS_FS
+	help
+	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
+	  various ReiserFS statistics and internal data at the expense of
+	  making your kernel or module slightly larger (+8 KB). This also
+	  increases the amount of kernel memory required for each mount.
+	  Almost everyone but ReiserFS developers and people fine-tuning
+	  reiserfs or tracing problems should say N.
+
+config ADFS_FS
+	tristate "ADFS file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines. If you say Y
+	  here, Linux will be able to read from ADFS partitions on hard drives
+	  and from ADFS-formatted floppy discs. If you also want to be able to
+	  write to those devices, say Y to "ADFS write support" below.
+
+	  The ADFS partition should be the first partition (i.e.,
+	  /dev/[hs]d?1) on each of your drives. Please read the file
+	  <file:Documentation/filesystems/adfs.txt> for further details.
+
+	  This code is also available as a module called adfs.o ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want). If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	help
+	  If you say Y here, you will be able to write to ADFS partitions on
+	  hard drives and ADFS-formatted floppy disks. This is experimental
+	  codes, so if you're unsure, say N.
+
+config AFFS_FS
+	tristate "Amiga FFS file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  The Fast File System (FFS) is the common file system used on hard
+	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+	  if you want to be able to read and write files from and to an Amiga
+	  FFS partition on your hard drive.  Amiga floppies however cannot be
+	  read with this driver due to an incompatibility of the floppy
+	  controller used in an Amiga and the standard floppy controller in
+	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+	  and <file:fs/affs/Changes>.
+
+	  With this driver you can also mount disk files used by Bernd
+	  Schmidt's Un*X Amiga Emulator
+	  (<http://www.freiburg.linux.de/~uae/>).
+	  If you want to do this, you will also need to say Y or M to "Loop
+	  device support", above.
+
+	  This file system is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called affs.o.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.  If unsure,
+	  say N.
+
+config HFS_FS
+	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  If you say Y here, you will be able to mount Macintosh-formatted
+	  floppy disks and hard drive partitions with full read-write access.
+	  Please read <file:fs/hfs/HFS.txt> to learn about the available mount
+	  options.
+
+	  This file system support is also available as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). The module is called hfs.o.  If you want to
+	  compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+config BEFS_FS
+	tristate "BeOS file systemv(BeFS) support (read only) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  The BeOS File System (BeFS) is the native file system of Be, Inc's
+	  BeOS. Notable features include support for arbitrary attributes
+	  on files and directories, and database-like indices on selected
+	  attributes. (Also note that this driver doesn't make those features
+	  available at this time). It is a 64 bit filesystem, so it supports
+	  extreemly large volumes and files.
+
+	  If you use this filesystem, you should also say Y to at least one
+	  of the NLS (native language support) options below.
+
+	  If you don't know what this is about, say N.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read Documentation/modules.txt. The module will be
+	  called befs.o.
+
+config BEFS_DEBUG
+	bool "Debug BeFS"
+	depends on BEFS_FS
+	help
+	  If you say Y here, you can use the 'debug' mount option to enable
+	  debugging output from the driver. 
+
+config BFS_FS
+	tristate "BFS file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  Boot File System (BFS) is a file system used under SCO UnixWare to
+	  allow the bootloader access to the kernel image and other important
+	  files during the boot process.  It is usually mounted under /stand
+	  and corresponds to the slice marked as "STAND" in the UnixWare
+	  partition.  You should say Y if you want to read or write the files
+	  on your /stand slice from within Linux.  You then also need to say Y
+	  to "UnixWare slices support", below.  More information about the BFS
+	  file system is contained in the file
+	  <file:Documentation/filesystems/bfs.txt>.
+
+	  If you don't know what this is about, say N.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called bfs.o.  Note that the file system of your root
+	  partition (the one containing the directory /) cannot be compiled as
+	  a module.
+
+config EXT3_FS
+	tristate "Ext3 journalling file system support"
+	---help---
+	  This is the journaling version of the Second extended file system
+	  (often called ext3), the de facto standard Linux file system
+	  (method to organize files on a storage device) for hard disks.
+
+	  The journaling code included in this driver means you do not have
+	  to run e2fsck (file system checker) on your file systems after a
+	  crash.  The journal keeps track of any changes that were being made
+	  at the time the system crashed, and can ensure that your file system
+	  is consistent without the need for a lengthy check.
+
+	  Other than adding the journal to the file system, the on-disk format
+	  of ext3 is identical to ext2.  It is possible to freely switch
+	  between using the ext3 driver and the ext2 driver, as long as the
+	  file system has been cleanly unmounted, or e2fsck is run on the file
+	  system.
+
+	  To add a journal on an existing ext2 file system or change the
+	  behavior of ext3 file systems, you can use the tune2fs utility ("man
+	  tune2fs").  To modify attributes of files and directories on ext3
+	  file systems, use chattr ("man chattr").  You need to be using
+	  e2fsprogs version 1.20 or later in order to create ext3 journals
+	  (available at <http://sourceforge.net/projects/e2fsprogs/>).
+
+	  If you want to compile this file system as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called ext3.o.  Be aware however that the file system
+	  of your root partition (the one containing the directory /) cannot
+	  be compiled as a module, and so this may be dangerous.
+
+# CONFIG_JBD could be its own option (even modular), but until there are
+# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS
+# dep_tristate '  Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS
+config JBD
+	bool
+	default EXT3_FS
+	---help---
+	  This is a generic journaling layer for block devices.  It is
+	  currently used by the ext3 file system, but it could also be used to
+	  add journal support to other file systems or block devices such as
+	  RAID or LVM.
+
+	  If you are using the ext3 file system, you need to say Y here. If
+	  you are not using ext3 then you will probably want to say N.
+
+	  If you want to compile this device as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called jbd.o.  If you are compiling ext3 into the kernel,
+	  you cannot compile this code as a module.
+
+config JBD_DEBUG
+	bool "JBD (ext3) debugging support"
+	depends on JBD
+	---help---
+	  If you are using the ext3 journaled file system (or potentially any
+	  other file system/device using JBD), this option allows you to
+	  enable debugging output while the system is running, in order to
+	  help track down any problems you are having.  By default the
+	  debugging output will be turned off.
+
+	  If you select Y here, then you will be able to turn on debugging
+	  with "echo N > /proc/sys/fs/jbd-debug", where N is a number between
+	  1 and 5, the higher the number, the more debugging output is
+	  generated.  To turn debugging off again, do
+	  "echo 0 > /proc/sys/fs/jbd-debug".
+
+# msdos file systems
+config FAT_FS
+	tristate "DOS FAT fs support"
+	---help---
+	  If you want to use one of the FAT-based file systems (the MS-DOS,
+	  VFAT (Windows 95) and UMSDOS (used to run Linux on top of an
+	  ordinary DOS partition) file systems), then you must say Y or M here
+	  to include FAT support. You will then be able to mount partitions or
+	  diskettes with FAT-based file systems and transparently access the
+	  files on them, i.e. MSDOS files will look and behave just like all
+	  other Unix files.
+
+	  This FAT support is not a file system in itself, it only provides
+	  the foundation for the other file systems. You will have to say Y or
+	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+	  order to make use of it.
+
+	  Another way to read and write MSDOS floppies and hard drive
+	  partitions from within Linux (but not transparently) is with the
+	  mtools ("man mtools") program suite. You don't need to say Y here in
+	  order to do that.
+
+	  If you need to move large files on floppies between a DOS and a
+	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+	  file system and use GNU tar's M option. GNU tar is a program
+	  available for Unix and DOS ("man tar" or "info tar").
+
+	  It is now also becoming possible to read and write compressed FAT
+	  file systems; read <file:Documentation/filesystems/fat_cvf.txt> for
+	  details.
+
+	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+	  say Y.
+
+	  If you want to compile this as a module however ( = code which can
+	  be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called fat.o.  Note that if you compile the FAT
+	  support as a module, you cannot compile any of the FAT-based file
+	  systems into the kernel -- they will have to be modules as well.
+	  The file system of your root partition (the one containing the
+	  directory /) cannot be a module, so don't say M here if you intend
+	  to use UMSDOS as your root file system.
+
+config MSDOS_FS
+	tristate "MSDOS fs support"
+	depends on FAT_FS
+	---help---
+	  This allows you to mount MSDOS partitions of your hard drive (unless
+	  they are compressed; to access compressed MSDOS partitions under
+	  Linux, you can either use the DOS emulator DOSEMU, described in the
+	  DOSEMU-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, or try dmsdosfs in
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+	  intend to use dosemu with a non-compressed MSDOS partition, say Y
+	  here) and MSDOS floppies. This means that file access becomes
+	  transparent, i.e. the MSDOS files look and behave just like all
+	  other Unix files.
+
+	  If you want to use UMSDOS, the Unix-like file system on top of a
+	  DOS file system, which allows you to run Linux from within a DOS
+	  partition without repartitioning, you'll have to say Y or M here.
+
+	  If you have Windows 95 or Windows NT installed on your MSDOS
+	  partitions, you should use the VFAT file system (say Y to "VFAT fs
+	  support" below), or you will not be able to see the long filenames
+	  generated by Windows 95 / Windows NT.
+
+	  This option will enlarge your kernel by about 7 KB. If unsure,
+	  answer Y. This will only work if you said Y to "DOS FAT fs support"
+	  as well. If you want to compile this as a module however ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want), say M here and read
+	  <file:Documentation/modules.txt>.
+	  The module will be called msdos.o.
+
+#dep_tristate '    UMSDOS: Unix-like file system on top of standard MSDOS fs' CONFIG_UMSDOS_FS $CONFIG_MSDOS_FS
+# UMSDOS is temprory broken
+config UMSDOS_FS
+	bool
+	---help---
+	  Say Y here if you want to run Linux from within an existing DOS
+	  partition of your hard drive. The advantage of this is that you can
+	  get away without repartitioning your hard drive (which often implies
+	  backing everything up and restoring afterwards) and hence you're
+	  able to quickly try out Linux or show it to your friends; the
+	  disadvantage is that Linux becomes susceptible to DOS viruses and
+	  that UMSDOS is somewhat slower than ext2fs.  Another use of UMSDOS
+	  is to write files with long unix filenames to MSDOS floppies; it
+	  also allows Unix-style soft-links and owner/permissions of files on
+	  MSDOS floppies.  You will need a program called umssync in order to
+	  make use of UMSDOS; read
+	  <file:Documentation/filesystems/umsdos.txt>.
+
+	  To get utilities for initializing/checking UMSDOS file system, or
+	  latest patches and/or information, visit the UMSDOS home page at
+	  <http://www.voyager.hr/~mnalis/umsdos/>.
+
+	  This option enlarges your kernel by about 28 KB and it only works if
+	  you said Y to both "DOS FAT fs support" and "MSDOS fs support"
+	  above.  If you want to compile this as a module ( = code which can
+	  be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called umsdos.o.  Note that the file system of your
+	  root partition (the one containing the directory /) cannot be a
+	  module, so saying M could be dangerous.  If unsure, say N.
+
+config VFAT_FS
+	tristate "VFAT (Windows-95) fs support"
+	depends on FAT_FS
+	---help---
+	  This option provides support for normal Windows file systems with
+	  long filenames.  That includes non-compressed FAT-based file systems
+	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+	  programs from the mtools package.
+
+	  You cannot use the VFAT file system for your Linux root partition
+	  (the one containing the directory /); use UMSDOS instead if you
+	  want to run Linux from within a DOS partition (i.e. say Y to
+	  "Unix like fs on top of std MSDOS fs", below).
+
+	  The VFAT support enlarges your kernel by about 10 KB and it only
+	  works if you said Y to the "DOS FAT fs support" above.  Please read
+	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  unsure, say Y.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called vfat.o.
+
+config EFS_FS
+	tristate "EFS file system support (read only) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+	  uses the XFS file system for hard disk partitions however).
+
+	  This implementation only offers read-only access. If you don't know
+	  what all this is about, it's safe to say N. For more information
+	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+	  If you want to compile the EFS file system support as a module ( =
+	  code which can be inserted in and removed from the running kernel
+	  whenever you want), say M here and read
+	  <file:Documentation/modules.txt>. The module will be called efs.o.
+
+config JFFS_FS
+	tristate "Journalling Flash File System (JFFS) support"
+	depends on MTD
+	help
+	  JFFS is the Journaling Flash File System developed by Axis
+	  Communications in Sweden, aimed at providing a crash/powerdown-safe
+	  file system for disk-less embedded devices. Further information is
+	  available at (<http://developer.axis.com/software/jffs/>).
+
+config JFFS_FS_VERBOSE
+	int "JFFS debugging verbosity (0 = quiet, 3 = noisy)"
+	depends on JFFS_FS
+	default "0"
+	help
+	  Determines the verbosity level of the JFFS debugging messages.
+
+config JFFS_PROC_FS
+	bool "JFFS stats available in /proc filesystem"
+	depends on JFFS_FS
+	help
+	  Enabling this option will cause statistics from mounted JFFS file systems
+	  to be made available to the user in the /proc/fs/jffs/ directory.
+
+config JFFS2_FS
+	tristate "Journalling Flash File System v2 (JFFS2) support"
+	depends on MTD
+	help
+	  JFFS2 is the second generation of the Journalling Flash File System
+	  for use on diskless embedded devices. It provides improved wear
+	  levelling, compression and support for hard links. You cannot use
+	  this on normal block devices, only on 'MTD' devices.
+
+	  Further information should be made available soon at
+	  <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+	int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+	depends on JFFS2_FS
+	default "0"
+	---help---
+	  This controls the amount of debugging messages produced by the JFFS2
+	  code. Set it to zero for use in production systems. For evaluation,
+	  testing and debugging, it's advisable to set it to one. This will
+	  enable a few assertions and will print debugging messages at the
+	  KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+	  is unlikely to be useful - it enables extra debugging in certain
+	  areas which at one point needed debugging, but when the bugs were
+	  located and fixed, the detailed messages were relegated to level 2.
+
+	  If reporting bugs, please try to have available a full dump of the
+	  messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_NAND
+	bool "JFFS2 support for NAND flash (EXPERIMENTAL)"
+	depends on JFFS2_FS && EXPERIMENTAL
+
+config CRAMFS
+	tristate "Compressed ROM file system support"
+	---help---
+	  Saying Y here includes support for CramFs (Compressed ROM File
+	  System).  CramFs is designed to be a simple, small, and compressed
+	  file system for ROM based embedded systems.  CramFs is read-only,
+	  limited to 256MB file systems (with 16MB files), and doesn't support
+	  16/32 bits uid/gid, hard links and timestamps.
+
+	  See <file:Documentation/filesystems/cramfs.txt> and
+	  <file:fs/cramfs/README> for further information.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called cramfs.o.  Note that the root file system (the one
+	  containing the directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
+
+config TMPFS
+	bool "Virtual memory file system support (former shm fs)"
+	help
+	  Tmpfs is a file system which keeps all files in virtual memory.
+
+	  Everything in tmpfs is temporary in the sense that no files will be
+	  created on your hard drive. The files live in memory and swap
+	  space. If you unmount a tmpfs instance, everything stored therein is
+	  lost.
+
+	  See <file:Documentation/filesystems/tmpfs.txt> for details.
+
+config RAMFS
+	bool
+	default y
+	---help---
+	  Ramfs is a file system which keeps all files in RAM. It allows
+	  read and write access.
+
+	  It is more of an programming example than a useable file system.  If
+	  you need a file system which lives in RAM with limit checking use
+	  tmpfs.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called ramfs.o.
+
+config ISO9660_FS
+	tristate "ISO 9660 CDROM file system support"
+	---help---
+	  This is the standard file system used on CD-ROMs.  It was previously
+	  known as "High Sierra File System" and is called "hsfs" on other
+	  Unix systems.  The so-called Rock-Ridge extensions which allow for
+	  long Unix filenames and symbolic links are also supported by this
+	  driver.  If you have a CD-ROM drive and want to do more with it than
+	  just listen to audio CDs and watch its LEDs, say Y (and read
+	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+	  available from <http://www.linuxdoc.org/docs.html#howto>), thereby
+	  enlarging your kernel by about 27 KB; otherwise say N.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called isofs.o.
+
+config JOLIET
+	bool "Microsoft Joliet CDROM extensions"
+	depends on ISO9660_FS
+	help
+	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+	  which allows for long filenames in unicode format (unicode is the
+	  new 16 bit character code, successor to ASCII, which encodes the
+	  characters of almost all languages of the world; see
+	  <http://www.unicode.org/> for more information).  Say Y here if you
+	  want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+	bool "Transparent decompression extension"
+	depends on ISO9660_FS
+	help
+	  This is a Linux-specific extension to RockRidge which lets you store
+	  data in compressed form on a CD-ROM and have it transparently
+	  decompressed when the CD-ROM is accessed.  See
+	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+	  necessary to create such a filesystem.  Say Y here if you want to be
+	  able to read such compressed CD-ROMs.
+
+config JFS_FS
+	tristate "JFS filesystem support"
+	help
+	  This is a port of IBM's Journaled Filesystem .  More information is
+	  available in the file Documentation/filesystems/jfs.txt.
+
+	  If you do not intend to use the JFS filesystem, say N.
+
+config JFS_DEBUG
+	bool "JFS debugging"
+	depends on JFS_FS
+	help
+	  If you are experiencing any problems with the JFS filesystem, say
+	  Y here.  This will result in additional debugging messages to be
+	  written to the system log.  Under normal circumstances, this
+	  results in very little overhead.
+
+config JFS_STATISTICS
+	bool "JFS statistics"
+	depends on JFS_FS
+	help
+	  Enabling this option will cause statistics from the JFS file system
+	  to be made available to the user in the /proc/fs/jfs/ directory.
+
+config MINIX_FS
+	tristate "Minix fs support"
+	---help---
+	  Minix is a simple operating system used in many classes about OS's.
+	  The minix file system (method to organize files on a hard disk
+	  partition or a floppy disk) was the original file system for Linux,
+	  but has been superseded by the second extended file system ext2fs.
+	  You don't want to use the minix file system on your hard disk
+	  because of certain built-in restrictions, but it is sometimes found
+	  on older Linux floppy disks.  This option will enlarge your kernel
+	  by about 28 KB. If unsure, say N.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>. The module
+	  will be called minix.o.  Note that the file system of your root
+	  partition (the one containing the directory /) cannot be compiled as
+	  a module.
+
+config VXFS_FS
+	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+	---help---
+	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+	  file system format.  VERITAS VxFS(TM) is the standard file system
+	  of SCO UnixWare (and possibly others) and optionally available
+	  for Sunsoft Solaris, HP-UX and many other operating systems.
+	  Currently only readonly access is supported.
+
+	  NOTE: the file system type as used by mount(1), mount(2) and
+	  fstab(5) is 'vxfs' as it describes the file system format, not
+	  the actual driver.
+
+	  This file system is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called freevxfs.o.  If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.  If
+	  unsure, say N.
+
+config NTFS_FS
+	tristate "NTFS file system support (read only)"
+	---help---
+	  NTFS is the file system of Microsoft Windows NT/2000/XP. For more
+	  information see <file:Documentation/filesystems/ntfs.txt>. Saying Y
+	  here would allow you to read from NTFS partitions.
+
+	  This file system is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called ntfs.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+	  If you are not using Windows NT/2000/XP in addition to Linux on your
+	  computer it is safe to say N.
+
+config NTFS_DEBUG
+	bool "NTFS debugging support"
+	depends on NTFS_FS
+	---help---
+	  If you are experiencing any problems with the NTFS file system, say
+	  Y here. This will result in additional consistency checks to be
+	  performed by the driver as well as additional debugging messages to
+	  be written to the system log. Note that debugging messages are
+	  disabled by default. To enable them, supply the option debug_msgs=1
+	  at the kernel command line when booting the kernel or as an option
+	  to insmod when loading the ntfs module. Once the driver is active,
+	  you can enable debugging messages by doing (as root):
+	  echo 1 > /proc/sys/fs/ntfs-debug
+	  Replacing the "1" with "0" would disable debug messages.
+
+	  If you leave debugging messages disabled, this results in little
+	  overhead, but enabling debug messages results in very significant
+	  slowdown of the system.
+
+	  When reporting bugs, please try to have available a full dump of
+	  debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+	bool "NTFS write support (DANGEROUS)"
+	depends on NTFS_FS && EXPERIMENTAL
+	help
+	  This enables the experimental write support in the NTFS driver.
+
+	  WARNING: Do not use this option unless you are actively developing
+	  NTFS as it is currently guaranteed to be broken and you
+	  may lose all your data!
+
+	  It is strongly recommended and perfectly safe to say N here.
+
+config HPFS_FS
+	tristate "OS/2 HPFS file system support"
+	---help---
+	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+	  is the file system used for organizing files on OS/2 hard disk
+	  partitions. Say Y if you want to be able to read files from and
+	  write files to an OS/2 HPFS partition on your hard drive. OS/2
+	  floppies however are in regular MSDOS format, so you don't need this
+	  option in order to be able to read them. Read
+	  <file:Documentation/filesystems/hpfs.txt>.
+
+	  This file system is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called hpfs.o.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.  If unsure,
+	  say N.
+
+config PROC_FS
+	bool "/proc file system support"
+	---help---
+	  This is a virtual file system providing information about the status
+	  of the system. "Virtual" means that it doesn't take up any space on
+	  your hard disk: the files are created on the fly by the kernel when
+	  you try to access them. Also, you cannot read the files with older
+	  version of the program less: you need to use more or cat.
+
+	  It's totally cool; for example, "cat /proc/interrupts" gives
+	  information about what the different IRQs are used for at the moment
+	  (there is a small number of Interrupt ReQuest lines in your computer
+	  that are used by the attached devices to gain the CPU's attention --
+	  often a source of trouble if two devices are mistakenly configured
+	  to use the same IRQ). The program procinfo to display some
+	  information about your system gathered from the /proc file system.
+
+	  Before you can use the /proc file system, it has to be mounted,
+	  meaning it has to be given a location in the directory hierarchy.
+	  That location should be /proc. A command such as "mount -t proc proc
+	  /proc" or the equivalent line in /etc/fstab does the job.
+
+	  The /proc file system is explained in the file
+	  <file:Documentation/filesystems/proc.txt> and on the proc(5) manpage
+	  ("man 5 proc").
+
+	  This option will enlarge your kernel by about 67 KB. Several
+	  programs depend on this, so everyone should say Y here.
+
+config DEVFS_FS
+	bool "/dev file system support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  This is support for devfs, a virtual file system (like /proc) which
+	  provides the file system interface to device drivers, normally found
+	  in /dev. Devfs does not depend on major and minor number
+	  allocations. Device drivers register entries in /dev which then
+	  appear automatically, which means that the system administrator does
+	  not have to create character and block special device files in the
+	  /dev directory using the mknod command (or MAKEDEV script) anymore.
+
+	  This is work in progress. If you want to use this, you *must* read
+	  the material in <file:Documentation/filesystems/devfs/>, especially
+	  the file README there.
+
+	  If unsure, say N.
+
+config DEVFS_MOUNT
+	bool "Automatically mount at boot"
+	depends on DEVFS_FS
+	help
+	  This option appears if you have CONFIG_DEVFS_FS enabled. Setting
+	  this to 'Y' will make the kernel automatically mount devfs onto /dev
+	  when the system is booted, before the init thread is started.
+	  You can override this with the "devfs=nomount" boot option.
+
+	  If unsure, say N.
+
+config DEVFS_DEBUG
+	bool "Debug devfs"
+	depends on DEVFS_FS
+	help
+	  If you say Y here, then the /dev file system code will generate
+	  debugging messages. See the file
+	  <file:Documentation/filesystems/devfs/boot-options> for more
+	  details.
+
+	  If unsure, say N.
+
+# It compiles as a module for testing only.  It should not be used
+# as a module in general.  If we make this "tristate", a bunch of people
+# who don't know what they are doing turn it on and complain when it
+# breaks.
+config DEVPTS_FS
+	bool "/dev/pts file system for Unix98 PTYs"
+	depends on UNIX98_PTYS
+	---help---
+	  You should say Y here if you said Y to "Unix98 PTY support" above.
+	  You'll then get a virtual file system which can be mounted on
+	  /dev/pts with "mount -t devpts". This, together with the pseudo
+	  terminal master multiplexer /dev/ptmx, is used for pseudo terminal
+	  support as described in The Open Group's Unix98 standard: in order
+	  to acquire a pseudo terminal, a process opens /dev/ptmx; the number
+	  of the pseudo terminal is then made available to the process and the
+	  pseudo terminal slave can be accessed as /dev/pts/<number>. What was
+	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+	  The GNU C library glibc 2.1 contains the requisite support for this
+	  mode of operation; you also need client programs that use the Unix98
+	  API. Please read <file:Documentation/Changes> for more information
+	  about the Unix98 pty devices.
+
+	  Note that the experimental "/dev file system support"
+	  (CONFIG_DEVFS_FS)  is a more general facility.
+
+config QNX4FS_FS
+	tristate "QNX4 file system support (read only)"
+	---help---
+	  This is the file system used by the real-time operating systems
+	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
+	  Further information is available at <http://www.qnx.com/>.
+	  Say Y if you intend to mount QNX hard disks or floppies.
+	  Unless you say Y to "QNX4FS read-write support" below, you will
+	  only be able to read these file systems.
+
+	  This file system support is also available as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). The module is called qnx4.o. If you want to
+	  compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
+
+config QNX4FS_RW
+	bool "QNX4FS write support (DANGEROUS)"
+	depends on QNX4FS_FS && EXPERIMENTAL
+	help
+	  Say Y if you want to test write support for QNX4 file systems.
+
+	  It's currently broken, so for now:
+	  answer N.
+
+config ROMFS_FS
+	tristate "ROM file system support"
+	---help---
+	  This is a very small read-only file system mainly intended for
+	  initial ram disks of installation disks, but it could be used for
+	  other read-only media as well.  Read
+	  <file:Documentation/filesystems/romfs.txt> for details.
+
+	  This file system support is also available as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). The module is called romfs.o.  If you want to
+	  compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  Note that the file system of your
+	  root partition (the one containing the directory /) cannot be a
+	  module.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
+
+config EXT2_FS
+	tristate "Second extended fs support"
+	---help---
+	  This is the de facto standard Linux file system (method to organize
+	  files on a storage device) for hard disks.
+
+	  You want to say Y here, unless you intend to use Linux exclusively
+	  from inside a DOS partition using the UMSDOS file system. The
+	  advantage of the latter is that you can get away without
+	  repartitioning your hard drive (which often implies backing
+	  everything up and restoring afterwards); the disadvantage is that
+	  Linux becomes susceptible to DOS viruses and that UMSDOS is somewhat
+	  slower than ext2fs. Even if you want to run Linux in this fashion,
+	  it might be a good idea to have ext2fs around: it enables you to
+	  read more floppy disks and facilitates the transition to a *real*
+	  Linux partition later. Another (rare) case which doesn't require
+	  ext2fs is a diskless Linux box which mounts all files over the
+	  network using NFS (in this case it's sufficient to say Y to "NFS
+	  file system support" below). Saying Y here will enlarge your kernel
+	  by about 44 KB.
+
+	  The Ext2fs-Undeletion mini-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, gives information about
+	  how to retrieve deleted files on ext2fs file systems.
+
+	  To change the behavior of ext2 file systems, you can use the tune2fs
+	  utility ("man tune2fs"). To modify attributes of files and
+	  directories on ext2 file systems, use chattr ("man chattr").
+
+	  Ext2fs partitions can be read from within DOS using the ext2tool
+	  command line tool package (available from
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/ext2/>) and from
+	  within Windows NT using the ext2nt command line tool package from
+	  <ftp://ibiblio.org/pub/Linux/utils/dos/>.  Explore2fs is a
+	  graphical explorer for ext2fs partitions which runs on Windows 95
+	  and Windows NT and includes experimental write support; it is
+	  available from
+	  <http://jnewbigin-pc.it.swin.edu.au/Linux/Explore2fs.htm>.
+
+	  If you want to compile this file system as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called ext2.o.  Be aware however that the file system
+	  of your root partition (the one containing the directory /) cannot
+	  be compiled as a module, and so this could be dangerous.  Most
+	  everyone wants to say Y here.
+
+config SYSV_FS
+	tristate "System V/Xenix/V7/Coherent file system support"
+	---help---
+	  SCO, Xenix and Coherent are commercial Unix systems for Intel
+	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
+	  here would allow you to read from their floppies and hard disk
+	  partitions.
+
+	  If you have floppies or hard disk partitions like that, it is likely
+	  that they contain binaries from those other Unix systems; in order
+	  to run these binaries, you will want to install linux-abi which is a
+	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
+	  UnixWare, Dell Unix and System V programs under Linux.  It is
+	  available via FTP (user: ftp) from
+	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+	  NOTE: that will work only for binaries from Intel-based systems;
+	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the System V file system support
+	  (but you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").  Note also that this option has
+	  nothing whatsoever to do with the option "System V IPC". Read about
+	  the System V file system in
+	  <file:Documentation/filesystems/sysv-fs.txt>.
+	  Saying Y here will enlarge your kernel by about 27 KB.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called sysv.o.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UDF_FS
+	tristate "UDF file system support (read only)"
+	---help---
+	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
+	  you intend to mount DVD discs or CDRW's written in packet mode, or
+	  if written to by other UDF utilities, such as DirectCD. This UDF
+	  file system support is read-only. If you want to write to UDF
+	  file systems on some media, you need to say Y to "UDF read-write
+	  support" below in addition. Please read
+	  <file:Documentation/filesystems/udf.txt>.
+
+	  This file system support is also available as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). The module is called udf.o. If you want to
+	  compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config UDF_RW
+	bool "UDF write support (DANGEROUS)"
+	depends on UDF_FS && EXPERIMENTAL
+	help
+	  Say Y if you want to test write support for UDF file systems.
+	  Due to lack of support for writing to CDR/CDRW's, this option
+	  is only supported for hard discs, DVD-RAM, and loopback files.
+
+config UFS_FS
+	tristate "UFS file system support (read only)"
+	---help---
+	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+	  Unixes can create and mount hard disk partitions and diskettes using
+	  this file system as well. Saying Y here will allow you to read from
+	  these partitions; if you also want to write to them, say Y to the
+	  experimental "UFS file system write support", below. Please read the
+	  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the UFS file system support (but
+	  you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").
+
+	  When accessing NeXTstep files, you may need to convert them from the
+	  NeXT character set to the Latin1 character set; use the program
+	  recode ("info recode") for this purpose.
+
+	  If you want to compile the UFS file system support as a module ( =
+	  code which can be inserted in and removed from the running kernel
+	  whenever you want), say M here and read
+	  <file:Documentation/modules.txt>. The module will be called ufs.o.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+	bool "UFS file system write support (DANGEROUS)"
+	depends on UFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want to try writing to UFS partitions. This is
+	  experimental, so you should back up your UFS partitions beforehand.
+
+config XFS_FS
+	tristate "XFS filesystem support"
+	---help---
+	  XFS is a high performance journaling filesystem which originated
+	  on the SGI IRIX platform.  It is completely multi-threaded, can
+	  support large files and large filesystems, extended attributes,
+	  variable block sizes, is extent based, and makes extensive use of
+	  Btrees (directories, extents, free space) to aid both performance
+	  and scalability.
+
+	  Refer to the documentation at <http://oss.sgi.com/projects/xfs/>
+	  for complete details.  This implementation is on-disk compatible
+	  with the IRIX version of XFS.
+
+	  If you want to compile this file system as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>. The
+	  module will be called xfs.o.  Be aware, however, that if the file
+	  system of your root partition is compiled as a module, you'll need
+	  to use an initial ramdisk (initrd) to boot.
+
+config XFS_RT
+	bool "Realtime support (EXPERIMENTAL)"
+	depends on XFS_FS && EXPERIMENTAL
+	---help---
+	  If you say Y here you will be able to mount and use XFS filesystems
+	  which contain a realtime subvolume. The realtime subvolume is a
+	  separate area of disk space where only file data is stored. The
+	  realtime subvolume is designed to provide very deterministic
+	  data rates suitable for media streaming applications.
+
+	  See the xfs man page in section 5 for a bit more information.
+
+	  This feature is unsupported at this time, is not yet fully
+	  functional, and may cause serious problems.
+
+	  If unsure, say N.
+
+config XFS_QUOTA
+	bool "Quota support"
+	depends on XFS_FS
+	---help---
+	  If you say Y here, you will be able to set limits for disk usage on
+	  a per user and/or a per group basis under XFS.  XFS considers quota
+	  information as filesystem metadata and uses journaling to provide a
+	  higher level guarantee of consistency.  The on-disk data format for
+	  quota is also compatible with the IRIX version of XFS, allowing a
+	  filesystem to be migrated between Linux and IRIX without any need
+	  for conversion.
+
+	  If unsure, say N.  More comprehensive documentation can be found in
+	  README.quota in the xfsprogs package.  XFS quota can be used either
+	  with or without the generic quota support enabled (CONFIG_QUOTA) -
+	  they are completely independent subsystems.
+
+
+menu "Network File Systems"
+	depends on NET
+
+config CODA_FS
+	tristate "Coda file system support (advanced network fs)"
+	depends on INET
+	---help---
+	  Coda is an advanced network file system, similar to NFS in that it
+	  enables you to mount file systems of a remote server and access them
+	  with regular Unix commands as if they were sitting on your hard
+	  disk.  Coda has several advantages over NFS: support for
+	  disconnected operation (e.g. for laptops), read/write server
+	  replication, security model for authentication and encryption,
+	  persistent client caches and write back caching.
+
+	  If you say Y here, your Linux box will be able to act as a Coda
+	  *client*.  You will need user level code as well, both for the
+	  client and server.  Servers are currently user level, i.e. they need
+	  no kernel support.  Please read
+	  <file:Documentation/filesystems/coda.txt> and check out the Coda
+	  home page <http://www.coda.cs.cmu.edu/>.
+
+	  If you want to compile the coda client support as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want), say M here and read
+	  <file:Documentation/modules.txt>.  The module will be called coda.o.
+
+config INTERMEZZO_FS
+	tristate "InterMezzo file system support (replicating fs) (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	help
+	  InterMezzo is a networked file system with disconnected operation
+	  and kernel level write back caching.  It is most often used for
+	  replicating potentially large trees or keeping laptop/desktop copies
+	  in sync.
+
+	  If you say Y or M your kernel or module will provide InterMezzo
+	  support.  You will also need a file server daemon, which you can get
+	  from <http://www.inter-mezzo.org/>.
+
+config NFS_FS
+	tristate "NFS file system support"
+	depends on INET
+	---help---
+	  If you are connected to some other (usually local) Unix computer
+	  (using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
+	  on that computer (the NFS server) using the Network File Sharing
+	  protocol, say Y. "Mounting files" means that the client can access
+	  the files with usual UNIX commands as if they were sitting on the
+	  client's hard disk. For this to work, the server must run the
+	  programs nfsd and mountd (but does not need to have NFS file system
+	  support enabled in its kernel). NFS is explained in the Network
+	  Administrator's Guide, available from
+	  <http://www.linuxdoc.org/docs.html#guide>, on its man page: "man
+	  nfs", and in the NFS-HOWTO.
+
+	  A superior but less widely used alternative to NFS is provided by
+	  the Coda file system; see "Coda file system support" below.
+
+	  If you say Y here, you should have said Y to TCP/IP networking also.
+	  This option would enlarge your kernel by about 27 KB.
+
+	  This file system is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called nfs.o. If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+	  If you are configuring a diskless machine which will mount its root
+	  file system over NFS at boot time, say Y here and to "Kernel
+	  level IP autoconfiguration" above and to "Root file system on NFS"
+	  below. You cannot compile this driver as a module in this case.
+	  There are two packages designed for booting diskless machines over
+	  the net: netboot, available from
+	  <http://ftp1.sourceforge.net/netboot/>, and Etherboot,
+	  available from <http://ftp1.sourceforge.net/etherboot/>.
+
+	  If you don't know what all this is about, say N.
+
+config NFS_V3
+	bool "Provide NFSv3 client support"
+	depends on NFS_FS
+	help
+	  Say Y here if you want your NFS client to be able to speak the newer
+	  version 3 of the NFS protocol.
+
+	  If unsure, say N.
+
+config NFS_V4
+	bool "Provide NFSv4 client support (EXPERIMENTAL)"
+	depends on NFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want your NFS client to be able to speak the newer
+	  version 4 of the NFS protocol.  This feature is experimental, and
+	  should only be used if you are interested in helping to test NFSv4.
+
+	  If unsure, say N.
+
+config ROOT_NFS
+	bool "Root file system on NFS"
+	depends on NFS_FS=y && IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS (presumably because your box doesn't have a hard disk),
+	  say Y. Read <file:Documentation/nfsroot.txt> for details. It is
+	  likely that in this case, you also want to say Y to "Kernel level IP
+	  autoconfiguration" so that your box can discover its network address
+	  at boot time.
+
+	  Most people say N here.
+
+config NFSD
+	tristate "NFS server support"
+	depends on INET
+	---help---
+	  If you want your Linux box to act as an NFS *server*, so that other
+	  computers on your local network which support NFS can access certain
+	  directories on your box transparently, you have two options: you can
+	  use the self-contained user space program nfsd, in which case you
+	  should say N here, or you can say Y and use the kernel based NFS
+	  server. The advantage of the kernel based solution is that it is
+	  faster.
+
+	  In either case, you will need support software; the respective
+	  locations are given in the file <file:Documentation/Changes> in the
+	  NFS section.
+
+	  If you say Y here, you will get support for version 2 of the NFS
+	  protocol (NFSv2). If you also want NFSv3, say Y to the next question
+	  as well.
+
+	  Please read the NFS-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  The NFS server is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called nfsd.o.  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.  If unsure,
+	  say N.
+
+config NFSD_V3
+	bool "Provide NFSv3 server support"
+	depends on NFSD
+	help
+	  If you would like to include the NFSv3 server as well as the NFSv2
+	  server, say Y here.  If unsure, say Y.
+
+config NFSD_V4
+	bool "Provide NFSv4 server support (EXPERIMENTAL)"
+	depends on NFSD_V3 && EXPERIMENTAL
+	help
+	  If you would like to include the NFSv4 server as well as the NFSv2
+	  and NFSv3 servers, say Y here.  This feature is experimental, and
+	  should only be used if you are interested in helping to test NFSv4.
+	  If unsure, say N.
+
+config NFSD_TCP
+	bool "Provide NFS server over TCP support (EXPERIMENTAL)"
+	depends on NFSD && EXPERIMENTAL
+	help
+	  Enable NFS service over TCP connections.  This the officially
+	  still experimental, but seems to work well.
+
+config SUNRPC
+	tristate
+	default m if NFS_FS!=y && NFSD!=y && (NFS_FS=m || NFSD=m)
+	default y if NFS_FS=y || NFSD=y
+
+config LOCKD
+	tristate
+	default m if NFS_FS!=y && NFSD!=y && (NFS_FS=m || NFSD=m)
+	default y if NFS_FS=y || NFSD=y
+
+config LOCKD_V4
+	bool
+	depends on NFSD_V3 || NFS_V3
+	default y
+
+config EXPORTFS
+	tristate
+	default NFSD
+
+config CIFS
+	tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)(EXPERIMENTAL)"
+	depends on INET
+	---help---
+	  This is the client VFS module for the Common Internet File System
+	  (CIFS) protocol which is the successor to the Server Message Block 
+	  (SMB) protocol, the native file sharing mechanism for most early
+	  PC operating systems.  CIFS is fully supported by current network
+	  file servers such as Windows 2000 (including Windows NT version 4 
+	  and Windows XP) as well by Samba (which provides excellent CIFS
+	  server support for Linux and many other operating systems).  For
+	  production systems the smbfs module may be used instead of this
+	  cifs module since smbfs is currently more stable and provides
+	  support for older servers.  The intent of this module is to provide the
+	  most advanced network file system function for CIFS compliant servers, 
+	  including support for dfs (heirarchical name space), secure per-user
+	  session establishment, safe distributed caching (oplock), optional
+	  packet signing, Unicode and other internationalization improvements, and
+	  optional Winbind (nsswitch) integration.  This module is in an early
+	  development stage, so unless you are specifically interested in this
+	  filesystem, just say N.
+
+config SMB_FS
+	tristate "SMB file system support (to mount Windows shares etc.)"
+	depends on INET
+	---help---
+	  SMB (Server Message Block) is the protocol Windows for Workgroups
+	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+	  files and printers over local networks.  Saying Y here allows you to
+	  mount their file systems (often called "shares" in this context) and
+	  access them just like any other Unix directory.  Currently, this
+	  works only if the Windows machines use TCP/IP as the underlying
+	  transport protocol, and not NetBEUI.  For details, read
+	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+	  available from <http://www.linuxdoc.org/docs.html#howto>.
+
+	  Note: if you just want your box to act as an SMB *server* and make
+	  files and printing services available to Windows clients (which need
+	  to have a TCP/IP stack), you don't need to say Y here; you can use
+	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+	  for that.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  If you want to compile the SMB support as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called smbfs.o.  Most people say N, however.
+
+config SMB_NLS_DEFAULT
+	bool "Use a default NLS"
+	depends on SMB_FS
+	help
+	  Enabling this will make smbfs use nls translations by default. You
+	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+	  settings and you need to give the default nls for the SMB server as
+	  CONFIG_SMB_NLS_REMOTE.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+	string "Default Remote NLS Option"
+	depends on SMB_NLS_DEFAULT
+	default "cp437"
+	help
+	  This setting allows you to specify a default value for which
+	  codepage the server uses. If this field is left blank no
+	  translations will be done by default. The local codepage/charset
+	  default to CONFIG_NLS_DEFAULT.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
+
+config NCP_FS
+	tristate "NCP file system support (to mount NetWare volumes)"
+	depends on IPX!=n || INET
+	---help---
+	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+	  used by Novell NetWare clients to talk to file servers.  It is to
+	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+	  to mount NetWare file server volumes and to access them just like
+	  any other Unix directory.  For details, please read the file
+	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+	  the IPX-HOWTO from <http://www.linuxdoc.org/docs.html#howto>.
+
+	  You do not have to say Y here if you want your Linux box to act as a
+	  file *server* for Novell NetWare clients.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called ncpfs.o.  Say N unless you are connected to a Novell
+	  network.
+
+source "fs/ncpfs/Kconfig"
+
+# for fs/nls/Config.in
+config AFS_FS
+	tristate "Andrew File System support (AFS) (Experimental)"
+	depends on INET && EXPERIMENTAL
+	help
+	  If you say Y here, you will get an experimental Andrew File System
+	  driver. It currently only supports unsecured read-only AFS access.
+
+	  See Documentation/filesystems/afs.txt for more intormation.
+
+	  If unsure, say N.
+
+config RXRPC
+	tristate
+	default m if AFS_FS=m
+	default y if AFS_FS=y
+
+endmenu
+
+# for fs/nls/Config.in
+config ZISOFS_FS
+	tristate
+	depends on ZISOFS
+	default ISO9660_FS
+
+
+menu "Partition Types"
+
+source "fs/partitions/Kconfig"
+
+endmenu
+
+source "fs/nls/Kconfig"
+
+endmenu
+

fs/ncpfs/Kconfig

+#
+# NCP Filesystem configuration
+#
+config NCPFS_PACKET_SIGNING
+	bool "Packet signatures"
+	depends on NCP_FS
+	help
+	  NCP allows packets to be signed for stronger security. If you want
+	  security, say Y.  Normal users can leave it off.  To be able to use
+	  packet signing you must use ncpfs > 2.0.12.
+
+config NCPFS_IOCTL_LOCKING
+	bool "Proprietary file locking"
+	depends on NCP_FS
+	help
+	  Allows locking of records on remote volumes.  Say N unless you have
+	  special applications which are able to utilize this locking scheme.
+
+config NCPFS_STRONG
+	bool "Clear remove/delete inhibit when needed"
+	depends on NCP_FS
+	help
+	  Allows manipulation of files flagged as Delete or Rename Inhibit.
+	  To use this feature you must mount volumes with the ncpmount
+	  parameter "-s" (ncpfs-2.0.12 and newer).  Say Y unless you are not
+	  mounting volumes with -f 444.
+
+config NCPFS_NFS_NS
+	bool "Use NFS namespace if available"
+	depends on NCP_FS
+	help
+	  Allows you to utilize NFS namespace on NetWare servers.  It brings
+	  you case sensitive filenames.  Say Y.  You can disable it at
+	  mount-time with the `-N nfs' parameter of ncpmount.
+
+config NCPFS_OS2_NS
+	bool "Use LONG (OS/2) namespace if available"
+	depends on NCP_FS
+	help
+	  Allows you to utilize OS2/LONG namespace on NetWare servers.
+	  Filenames in this namespace are limited to 255 characters, they are
+	  case insensitive, and case in names is preserved.  Say Y.  You can
+	  disable it at mount time with the -N os2 parameter of ncpmount.
+
+config NCPFS_SMALLDOS
+	bool "Lowercase DOS filenames"
+	depends on NCP_FS
+	---help---
+	  If you say Y here, every filename on a NetWare server volume using
+	  the OS2/LONG namespace and created under DOS or on a volume using
+	  DOS namespace will be converted to lowercase characters.
+	  Saying N here will give you these filenames in uppercase.
+
+	  This is only a cosmetic option since the OS2/LONG namespace is case
+	  insensitive. The only major reason for this option is backward
+	  compatibility when moving from DOS to OS2/LONG namespace support.
+	  Long filenames (created by Win95) will not be affected.
+
+	  This option does not solve the problem that filenames appear
+	  differently under Linux and under Windows, since Windows does an
+	  additional conversions on the client side. You can achieve similar
+	  effects by saying Y to "Allow using of Native Language Support"
+	  below.
+
+config NCPFS_NLS
+	bool "Use Native Language Support"
+	depends on NCP_FS
+	help
+	  Allows you to use codepages and I/O charsets for file name
+	  translation between the server file system and input/output. This
+	  may be useful, if you want to access the server with other operating
+	  systems, e.g. Windows 95. See also NLS for more Information.
+
+	  To select codepages and I/O charsets use ncpfs-2.2.0.13 or newer.
+
+config NCPFS_EXTRAS
+	bool "Enable symbolic links and execute flags"
+	depends on NCP_FS
+	help
+	  This enables the use of symbolic links and an execute permission
+	  bit on NCPFS. The file server need not have long name space or NFS
+	  name space loaded for these to work.
+
+	  To use the new attributes, it is recommended to use the flags
+	  '-f 600 -d 755' on the ncpmount command line.
+

fs/nls/Kconfig

+#
+# Native language support configuration
+#
+# smb wants NLS
+config SMB_NLS
+	bool
+	depends on SMB_FS
+	default y
+
+# msdos and Joliet want NLS
+config NLS
+	bool
+	depends on JOLIET || FAT_FS || NTFS_FS || NCPFS_NLS || SMB_NLS || JFS_FS || CIFS || BEFS_FS
+	default y
+
+
+menu "Native Language Support"
+	depends on NLS
+
+config NLS_DEFAULT
+	string "Default NLS Option"
+	default "iso8859-1"
+	---help---
+	  The default NLS used when mounting file system. Note, that this is
+	  the NLS used by your console, not the NLS used by a specific file
+	  system (if different) to store data (filenames) on a disk.
+	  Currently, the valid values are:
+	  big5, cp437, cp737, cp775, cp850, cp852, cp855, cp857, cp860, cp861,
+	  cp862, cp863, cp864, cp865, cp866, cp869, cp874, cp932, cp936,
+	  cp949, cp950, cp1251, cp1255, euc-jp, euc-kr, gb2312, iso8859-1,
+	  iso8859-2, iso8859-3, iso8859-4, iso8859-5, iso8859-6, iso8859-7,
+	  iso8859-8, iso8859-9, iso8859-13, iso8859-14, iso8859-15,
+	  koi8-r, koi8-ru, koi8-u, sjis, tis-620, utf8.
+	  If you specify a wrong value, it will use the built-in NLS;
+	  compatible with iso8859-1.
+
+	  If unsure, specify it as "iso8859-1".
+
+config NLS_CODEPAGE_437
+	tristate "Codepage 437 (United States, Canada)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored
+	  in so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage that is used in
+	  the United States and parts of Canada. This is recommended.
+
+config NLS_CODEPAGE_737
+	tristate "Codepage 737 (Greek)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored
+	  in so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage that is used for
+	  Greek. If unsure, say N.
+
+config NLS_CODEPAGE_775
+	tristate "Codepage 775 (Baltic Rim)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored
+	  in so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage that is used
+	  for the Baltic Rim Languages (Latvian and Lithuanian). If unsure,
+	  say N.
+
+config NLS_CODEPAGE_850
+	tristate "Codepage 850 (Europe)"
+	---help---
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage that is used for
+	  much of Europe -- United Kingdom, Germany, Spain, Italy, and [add
+	  more countries here]. It has some characters useful to many European
+	  languages that are not part of the US codepage 437.
+
+	  If unsure, say Y.
+
+config NLS_CODEPAGE_852
+	tristate "Codepage 852 (Central/Eastern Europe)"
+	---help---
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the Latin 2 codepage used by DOS
+	  for much of Central and Eastern Europe. It has all the required
+	  characters for these languages: Albanian, Croatian, Czech, English,
+	  Finnish, Hungarian, Irish, German, Polish, Romanian, Serbian (Latin
+	  transcription), Slovak, Slovenian, and Sorbian.
+
+config NLS_CODEPAGE_855
+	tristate "Codepage 855 (Cyrillic)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Cyrillic.
+
+config NLS_CODEPAGE_857
+	tristate "Codepage 857 (Turkish)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Turkish.
+
+config NLS_CODEPAGE_860
+	tristate "Codepage 860 (Portuguese)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Portuguese.
+
+config NLS_CODEPAGE_861
+	tristate "Codepage 861 (Icelandic)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Icelandic.
+
+config NLS_CODEPAGE_862
+	tristate "Codepage 862 (Hebrew)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Hebrew.
+
+config NLS_CODEPAGE_863
+	tristate "Codepage 863 (Canadian French)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Canadian
+	  French.
+
+config NLS_CODEPAGE_864
+	tristate "Codepage 864 (Arabic)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Arabic.
+
+config NLS_CODEPAGE_865
+	tristate "Codepage 865 (Norwegian, Danish)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for the Nordic
+	  European countries.
+
+config NLS_CODEPAGE_866
+	tristate "Codepage 866 (Cyrillic/Russian)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for
+	  Cyrillic/Russian.
+
+config NLS_CODEPAGE_869
+	tristate "Codepage 869 (Greek)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Greek.
+
+config NLS_CODEPAGE_936
+	tristate "Simplified Chinese charset (CP936, GB2312)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Simplified
+	  Chinese(GBK).
+
+config NLS_CODEPAGE_950
+	tristate "Traditional Chinese charset (Big5)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Traditional
+	  Chinese(Big5).
+
+config NLS_CODEPAGE_932
+	tristate "Japanese charsets (Shift-JIS, EUC-JP)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Shift-JIS
+	  or EUC-JP. To use EUC-JP, you can use 'euc-jp' as mount option or
+	  NLS Default value during kernel configuration, instead of 'cp932'.
+
+config NLS_CODEPAGE_949
+	tristate "Korean charset (CP949, EUC-KR)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for UHC.
+
+config NLS_CODEPAGE_874
+	tristate "Thai charset (CP874, TIS-620)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Thai.
+
+config NLS_ISO8859_8
+	tristate "Hebrew charsets (ISO-8859-8, CP1255)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for ISO8859-8, the Hebrew
+	  character set.
+
+config NLS_CODEPAGE_1250
+	tristate "Windows CP1250 (Slavic/Central European Languages)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CDROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Windows CP-1250
+	  character set, which works for most Latin-written Slavic and Central
+	  European languages: Czech, German, Hungarian, Polish, Rumanian, Croatian,
+	  Slovak, Slovene.
+
+config NLS_CODEPAGE_1251
+	tristate "Windows CP1251 (Bulgarian, Belarusian)"
+	help
+	  The Microsoft FAT file system family can deal with filenames in
+	  native language character sets. These character sets are stored in
+	  so-called DOS codepages. You need to include the appropriate
+	  codepage if you want to be able to read/write these filenames on
+	  DOS/Windows partitions correctly. This does apply to the filenames
+	  only, not to the file contents. You can include several codepages;
+	  say Y here if you want to include the DOS codepage for Russian and
+	  Bulgarian and Belarusian.
+
+config NLS_ISO8859_1
+	tristate "NLS ISO 8859-1  (Latin 1; Western European Languages)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 1 character
+	  set, which covers most West European languages such as Albanian,
+	  Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German,
+	  Galician, Irish, Icelandic, Italian, Norwegian, Portuguese, Spanish,
+	  and Swedish. It is also the default for the US. If unsure, say Y.
+
+config NLS_ISO8859_2
+	tristate "NLS ISO 8859-2  (Latin 2; Slavic/Central European Languages)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 2 character
+	  set, which works for most Latin-written Slavic and Central European
+	  languages: Czech, German, Hungarian, Polish, Rumanian, Croatian,
+	  Slovak, Slovene.
+
+config NLS_ISO8859_3
+	tristate "NLS ISO 8859-3  (Latin 3; Esperanto, Galician, Maltese, Turkish)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 3 character
+	  set, which is popular with authors of Esperanto, Galician, Maltese,
+	  and Turkish.
+
+config NLS_ISO8859_4
+	tristate "NLS ISO 8859-4  (Latin 4; old Baltic charset)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 4 character
+	  set which introduces letters for Estonian, Latvian, and
+	  Lithuanian. It is an incomplete predecessor of Latin 7.
+
+config NLS_ISO8859_5
+	tristate "NLS ISO 8859-5  (Cyrillic)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for ISO8859-5, a Cyrillic
+	  character set with which you can type Bulgarian, Belarusian,
+	  Macedonian, Russian, Serbian, and Ukrainian. Note that the charset
+	  KOI8-R is preferred in Russia.
+
+config NLS_ISO8859_6
+	tristate "NLS ISO 8859-6  (Arabic)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for ISO8859-6, the Arabic
+	  character set.
+
+config NLS_ISO8859_7
+	tristate "NLS ISO 8859-7  (Modern Greek)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for ISO8859-7, the Modern
+	  Greek character set.
+
+config NLS_ISO8859_9
+	tristate "NLS ISO 8859-9  (Latin 5; Turkish)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 5 character
+	  set, and it replaces the rarely needed Icelandic letters in Latin 1
+	  with the Turkish ones. Useful in Turkey.
+
+config NLS_ISO8859_13
+	tristate "NLS ISO 8859-13 (Latin 7; Baltic)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 7 character
+	  set, which supports modern Baltic languages including Latvian
+	  and Lithuanian.
+
+config NLS_ISO8859_14
+	tristate "NLS ISO 8859-14 (Latin 8; Celtic)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 8 character
+	  set, which adds the last accented vowels for Welsh (aka Cymraeg)
+	  (and Manx Gaelic) that were missing in Latin 1.
+	  <http://linux.speech.cymru.org/> has further information.
+
+config NLS_ISO8859_15
+	tristate "NLS ISO 8859-15 (Latin 9; Western European Languages with Euro)"
+	---help---
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the Latin 9 character
+	  set, which covers most West European languages such as Albanian,
+	  Catalan, Danish, Dutch, English, Estonian, Faeroese, Finnish,
+	  French, German, Galician, Irish, Icelandic, Italian, Norwegian,
+	  Portuguese, Spanish, and Swedish. Latin 9 is an update to
+	  Latin 1 (ISO 8859-1) that removes a handful of rarely used
+	  characters and instead adds support for Estonian, corrects the
+	  support for French and Finnish, and adds the new Euro character.
+	  If unsure, say Y.
+
+config NLS_KOI8_R
+	tristate "NLS KOI8-R (Russian)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the preferred Russian
+	  character set.
+
+config NLS_KOI8_U
+	tristate "NLS KOI8-U/RU (Ukrainian, Belarusian)"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the preferred Ukrainian
+	  (koi8-u) and Belarusian (koi8-ru) character sets.
+
+config NLS_UTF8
+	tristate "NLS UTF8"
+	help
+	  If you want to display filenames with native language characters
+	  from the Microsoft FAT file system family or from JOLIET CD-ROMs
+	  correctly on the screen, you need to include the appropriate
+	  input/output character sets. Say Y here for the UTF-8 encoding of
+	  the Unicode/ISO9646 universal character set.
+
+endmenu
+

fs/partitions/Kconfig

+#
+# Partition configuration
+#
+config PARTITION_ADVANCED
+	bool "Advanced partition selection"
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under an operating system running on a different
+	  architecture than your Linux system.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about foreign partitioning schemes.
+
+	  If unsure, say N.
+
+config ACORN_PARTITION
+	bool "Acorn partition support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && ARCH_ACORN
+	help
+	  Support hard disks partitioned under Acorn operating systems.
+
+#      bool '    Cumana partition support' CONFIG_ACORN_PARTITION_CUMANA
+config ACORN_PARTITION_ICS
+	bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if !PARTITION_ADVANCED && ARCH_ACORN
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using the ICS interface on Acorn machines.
+
+config ACORN_PARTITION_ADFS
+	bool "Native filecore partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if !PARTITION_ADVANCED && ARCH_ACORN
+	help
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines.  If you say
+	  `Y' here, Linux will support disk partitions created under ADFS.
+
+config ACORN_PARTITION_POWERTEC
+	bool "PowerTec partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if !PARTITION_ADVANCED && ARCH_ACORN
+	help
+	  Support reading partition tables created on Acorn machines using
+	  the PowerTec SCSI drive.
+
+config ACORN_PARTITION_RISCIX
+	bool "RISCiX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
+	default y if !PARTITION_ADVANCED && ARCH_ACORN
+	help
+	  Once upon a time, there was a native Unix port for the Acorn series
+	  of machines called RISCiX.  If you say 'Y' here, Linux will be able
+	  to read disks partitioned under RISCiX.
+
+config OSF_PARTITION
+	bool "Alpha OSF partition support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && ALPHA
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned on an Alpha machine.
+
+config AMIGA_PARTITION
+	bool "Amiga partition table support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && (AMIGA || AFFS_FS=y)
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under AmigaOS.
+
+config ATARI_PARTITION
+	bool "Atari partition table support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && ATARI
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned under the Atari OS.
+
+config IBM_PARTITION
+	bool "IBM disk label and partition support"
+	depends on PARTITION_ADVANCED && ARCH_S390
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by IBM DASD disks operating under CMS.
+	  Otherwise, say N.
+
+config MAC_PARTITION
+	bool "Macintosh partition map support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && MAC
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned on a Macintosh.
+
+config MSDOS_PARTITION
+	bool "PC BIOS (MSDOS partition tables) support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && !AMIGA && !ATARI && !MAC && !SGI_IP22 && !ARM && !SGI_IP27
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned on an x86 PC (not necessarily by DOS).
+
+config BSD_DISKLABEL
+	bool "BSD disklabel (FreeBSD partition tables) support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  FreeBSD uses its own hard disk partition scheme on your PC. It
+	  requires only one entry in the primary partition table of your disk
+	  and manages it similarly to DOS extended partitions, putting in its
+	  first sector a new partition table in BSD disklabel format. Saying Y
+	  here allows you to read these disklabels and further mount FreeBSD
+	  partitions from within Linux if you have also said Y to "UFS
+	  file system support", above. If you don't know what all this is
+	  about, say N.
+
+config MINIX_SUBPARTITION
+	bool "Minix subpartition support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  Minix 2.0.0/2.0.2 subpartition table support for Linux.
+	  Say Y here if you want to mount and use Minix 2.0.0/2.0.2
+	  subpartitions.
+
+config SOLARIS_X86_PARTITION
+	bool "Solaris (x86) partition table support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	help
+	  Like most systems, Solaris x86 uses its own hard disk partition
+	  table format, incompatible with all others. Saying Y here allows you
+	  to read these partition tables and further mount Solaris x86
+	  partitions from within Linux if you have also said Y to "UFS
+	  file system support", above.
+
+config UNIXWARE_DISKLABEL
+	bool "Unixware slices support"
+	depends on PARTITION_ADVANCED && MSDOS_PARTITION
+	---help---
+	  Like some systems, UnixWare uses its own slice table inside a
+	  partition (VTOC - Virtual Table of Contents). Its format is
+	  incompatible with all other OSes. Saying Y here allows you to read
+	  VTOC and further mount UnixWare partitions read-only from within
+	  Linux if you have also said Y to "UFS file system support" or
+	  "System V and Coherent file system support", above.
+
+	  This is mainly used to carry data from a UnixWare box to your
+	  Linux box via a removable medium like magneto-optical, ZIP or
+	  removable IDE drives. Note, however, that a good portable way to
+	  transport files and directories between unixes (and even other
+	  operating systems) is given by the tar program ("man tar" or
+	  preferably "info tar").
+
+	  If you don't know what all this is about, say N.
+
+config LDM_PARTITION
+	bool "Windows Logical Disk Manager (Dynamic Disk) support"
+	depends on PARTITION_ADVANCED
+	---help---
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using Windows 2000's or XP's Logical Disk Manager.
+	  They are also known as "Dynamic Disks".
+
+	  Windows 2000 introduced the concept of Dynamic Disks to get around
+	  the limitations of the PC's partitioning scheme.  The Logical Disk
+	  Manager allows the user to repartition a disk and create spanned,
+	  mirrored, striped or RAID volumes, all without the need for
+	  rebooting.
+
+	  Normal partitions are now called Basic Disks under Windows 2000 and
+	  XP.
+
+	  For a fuller description read <file:Documentation/ldm.txt>.
+
+	  If unsure, say N.
+
+config LDM_DEBUG
+	bool "Windows LDM extra logging"
+	depends on LDM_PARTITION
+	help
+	  Say Y here if you would like LDM to log verbosely.  This could be
+	  helpful if the driver doesn't work as expected and you'd like to
+	  report a bug.
+
+	  If unsure, say N.
+
+config SGI_PARTITION
+	bool "SGI partition support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && (SGI_IP22 || SGI_IP27)
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by SGI machines.
+
+config ULTRIX_PARTITION
+	bool "Ultrix partition table support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && DECSTATION
+	help
+	  Say Y here if you would like to be able to read the hard disk
+	  partition table format used by DEC (now Compaq) Ultrix machines.
+	  Otherwise, say N.
+
+config SUN_PARTITION
+	bool "Sun partition tables support" if PARTITION_ADVANCED
+	default y if !PARTITION_ADVANCED && (SPARC32 || SPARC64)
+	---help---
+	  Like most systems, SunOS uses its own hard disk partition table
+	  format, incompatible with all others. Saying Y here allows you to
+	  read these partition tables and further mount SunOS partitions from
+	  within Linux if you have also said Y to "UFS file system support",
+	  above. This is mainly used to carry data from a SPARC under SunOS to
+	  your Linux box via a removable medium like magneto-optical or ZIP
+	  drives; note however that a good portable way to transport files and
+	  directories between unixes (and even other operating systems) is
+	  given by the tar program ("man tar" or preferably "info tar"). If
+	  you don't know what all this is about, say N.
+
+config EFI_PARTITION
+	bool "EFI GUID Partition support"
+	depends on PARTITION_ADVANCED
+	help
+	  Say Y here if you would like to use hard disks under Linux which
+	  were partitioned using EFI GPT.  Presently only useful on the
+	  IA-64 platform.
+
+#      define_bool CONFIG_ACORN_PARTITION_CUMANA y

init/Kconfig

+
+menu "Code maturity level options"
+
+config EXPERIMENTAL
+	bool "Prompt for development and/or incomplete code/drivers"
+	---help---
+	  Some of the various things that Linux supports (such as network
+	  drivers, file systems, network protocols, etc.) can be in a state
+	  of development where the functionality, stability, or the level of
+	  testing is not yet high enough for general use. This is usually
+	  known as the "alpha-test" phase among developers. If a feature is
+	  currently in alpha-test, then the developers usually discourage
+	  uninformed widespread use of this feature by the general public to
+	  avoid "Why doesn't this work?" type mail messages. However, active
+	  testing and use of these systems is welcomed. Just be aware that it
+	  may not meet the normal level of reliability or it may fail to work
+	  in some special cases. Detailed bug reports from people familiar
+	  with the kernel internals are usually welcomed by the developers
+	  (before submitting bug reports, please read the documents
+	  <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
+	  <file:Documentation/BUG-HUNTING>, and
+	  <file:Documentation/oops-tracing.txt> in the kernel source).
+
+	  This option will also make obsoleted drivers available. These are
+	  drivers that have been replaced by something else, and/or are
+	  scheduled to be removed in a future kernel release.
+
+	  Unless you intend to help test and develop a feature or driver that
+	  falls into this category, or you have a situation that requires
+	  using these features, you should probably say N here, which will
+	  cause the configurator to present you with fewer choices. If
+	  you say Y here, you will be offered the choice of using features or
+	  drivers that are currently considered to be in the alpha-test phase.
+
+endmenu
+
+
+menu "General setup"
+
+config NET
+	bool "Networking support"
+	---help---
+	  Unless you really know what you are doing, you should say Y here.
+	  The reason is that some programs need kernel networking support even
+	  when running on a stand-alone machine that isn't connected to any
+	  other computer. If you are upgrading from an older kernel, you
+	  should consider updating your networking tools too because changes
+	  in the kernel and the tools often go hand in hand. The tools are
+	  contained in the package net-tools, the location and version number
+	  of which are given in <file:Documentation/Changes>.
+
+	  For a general introduction to Linux networking, it is highly
+	  recommended to read the NET-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+config SYSVIPC
+	bool "System V IPC"
+	---help---
+	  Inter Process Communication is a suite of library functions and
+	  system calls which let processes (running programs) synchronize and
+	  exchange information. It is generally considered to be a good thing,
+	  and some programs won't run unless you say Y here. In particular, if
+	  you want to run the DOS emulator dosemu under Linux (read the
+	  DOSEMU-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>), you'll need to say Y
+	  here.
+
+	  You can find documentation about IPC with "info ipc" and also in
+	  section 6.4 of the Linux Programmer's Guide, available from
+	  <http://www.linuxdoc.org/docs.html#guide>.
+
+config BSD_PROCESS_ACCT
+	bool "BSD Process Accounting"
+	help
+	  If you say Y here, a user level program will be able to instruct the
+	  kernel (via a special system call) to write process accounting
+	  information to a file: whenever a process exits, information about
+	  that process will be appended to the file by the kernel.  The
+	  information includes things such as creation time, owning user,
+	  command name, memory usage, controlling terminal etc. (the complete
+	  list is in the struct acct in <file:include/linux/acct.h>).  It is
+	  up to the user level program to do useful things with this
+	  information.  This is generally a good idea, so say Y.
+
+config SYSCTL
+	bool "Sysctl support"
+	---help---
+	  The sysctl interface provides a means of dynamically changing
+	  certain kernel parameters and variables on the fly without requiring
+	  a recompile of the kernel or reboot of the system.  The primary
+	  interface consists of a system call, but if you say Y to "/proc
+	  file system support", a tree of modifiable sysctl entries will be
+	  generated beneath the /proc/sys directory. They are explained in the
+	  files in <file:Documentation/sysctl/>.  Note that enabling this
+	  option will enlarge the kernel by at least 8 KB.
+
+	  As it is generally a good thing, you should say Y here unless
+	  building a kernel for install/rescue disks or your system is very
+	  limited in memory.
+
+endmenu
+
+
+menu "Loadable module support"
+
+config MODULES
+	bool "Enable loadable module support"
+	help
+	  Kernel modules are small pieces of compiled code which can be
+	  inserted in or removed from the running kernel, using the programs
+	  insmod and rmmod. This is described in the file
+	  <file:Documentation/modules.txt>, including the fact that you have
+	  to say "make modules" in order to compile the modules that you chose
+	  during kernel configuration.  Modules can be device drivers, file
+	  systems, binary executable formats, and so on. If you think that you
+	  may want to make use of modules with this kernel in the future, then
+	  say Y here.  If unsure, say Y.
+
+config MODVERSIONS
+	bool "Set version information on all module symbols"
+	depends on MODULES
+	---help---
+	  Usually, modules have to be recompiled whenever you switch to a new
+	  kernel.  Saying Y here makes it possible, and safe, to use the
+	  same modules even after compiling a new kernel; this requires the
+	  program modprobe. All the software needed for module support is in
+	  the modutils package (check the file <file:Documentation/Changes>
+	  for location and latest version).  NOTE: if you say Y here but don't
+	  have the program genksyms (which is also contained in the above
+	  mentioned modutils package), then the building of your kernel will
+	  fail.  If you are going to use modules that are generated from
+	  non-kernel sources, you would benefit from this option.  Otherwise
+	  it's not that important.  So, N ought to be a safe bet.
+
+config KMOD
+	bool "Kernel module loader"
+	depends on MODULES
+	help
+	  Normally when you have selected some drivers and/or file systems to
+	  be created as loadable modules, you also have the responsibility to
+	  load the corresponding modules (using the programs insmod or
+	  modprobe) before you can use them. If you say Y here however, the
+	  kernel will be able to load modules for itself: when a part of the
+	  kernel needs a module, it runs modprobe with the appropriate
+	  arguments, thereby loading the module if it is available. (This is a
+	  replacement for kerneld.) Say Y here and read about configuring it
+	  in <file:Documentation/kmod.txt>.
+
+endmenu
+

lib/Kconfig

+#
+# Library configuration
+#
+
+menu "Library routines"
+
+config CRC32
+	tristate "CRC32 functions"
+	help
+	  This option is provided for the case where no in-kernel-tree
+	  modules require CRC32 functions, but a module built outside the
+	  kernel tree does. Such modules that use library CRC32 functions
+	  require M here.
+
+#
+# Do we need the compression support?
+#
+config ZLIB_INFLATE
+	tristate
+	default m if CRAMFS!=y && PPP_DEFLATE!=y && JFFS2_FS!=y && ZISOFS_FS!=y && (CRAMFS=m || PPP_DEFLATE=m || JFFS2_FS=m || ZISOFS_FS=m)
+	default y if CRAMFS=y || PPP_DEFLATE=y || JFFS2_FS=y || ZISOFS_FS=y
+
+config ZLIB_DEFLATE
+	tristate
+	default m if PPP_DEFLATE!=y && JFFS2_FS!=y && (PPP_DEFLATE=m || JFFS2_FS=m)
+	default y if PPP_DEFLATE=y || JFFS2_FS=y
+
+endmenu
+

net/Kconfig

+#
+# Network configuration
+#
+
+menu "Networking options"
+	depends on NET
+
+config PACKET
+	tristate "Packet socket"
+	---help---
+	  The Packet protocol is used by applications which communicate
+	  directly with network devices without an intermediate network
+	  protocol implemented in the kernel, e.g. tcpdump.  If you want them
+	  to work, choose Y.
+
+	  This driver is also available as a module called af_packet.o ( =
+	  code which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>; if you use modprobe
+	  or kmod, you may also want to add "alias net-pf-17 af_packet" to
+	  /etc/modules.conf.
+
+	  If unsure, say Y.
+
+config PACKET_MMAP
+	bool "Packet socket: mmapped IO"
+	depends on PACKET
+	help
+	  If you say Y here, the Packet protocol driver will use an IO
+	  mechanism that results in faster communication.
+
+	  If unsure, say N.
+
+config NETLINK_DEV
+	tristate "Netlink device emulation"
+	help
+	  This option will be removed soon. Any programs that want to use
+	  character special nodes like /dev/tap0 or /dev/route (all with major
+	  number 36) need this option, and need to be rewritten soon to use
+	  the real netlink socket.
+	  This is a backward compatibility option, choose Y for now.
+
+config NETFILTER
+	bool "Network packet filtering (replaces ipchains)"
+	---help---
+	  Netfilter is a framework for filtering and mangling network packets
+	  that pass through your Linux box.
+
+	  The most common use of packet filtering is to run your Linux box as
+	  a firewall protecting a local network from the Internet. The type of
+	  firewall provided by this kernel support is called a "packet
+	  filter", which means that it can reject individual network packets
+	  based on type, source, destination etc. The other kind of firewall,
+	  a "proxy-based" one, is more secure but more intrusive and more
+	  bothersome to set up; it inspects the network traffic much more
+	  closely, modifies it and has knowledge about the higher level
+	  protocols, which a packet filter lacks. Moreover, proxy-based
+	  firewalls often require changes to the programs running on the local
+	  clients. Proxy-based firewalls don't need support by the kernel, but
+	  they are often combined with a packet filter, which only works if
+	  you say Y here.
+
+	  You should also say Y here if you intend to use your Linux box as
+	  the gateway to the Internet for a local network of machines without
+	  globally valid IP addresses. This is called "masquerading": if one
+	  of the computers on your local network wants to send something to
+	  the outside, your box can "masquerade" as that computer, i.e. it
+	  forwards the traffic to the intended outside destination, but
+	  modifies the packets to make it look like they came from the
+	  firewall box itself. It works both ways: if the outside host
+	  replies, the Linux box will silently forward the traffic to the
+	  correct local computer. This way, the computers on your local net
+	  are completely invisible to the outside world, even though they can
+	  reach the outside and can receive replies. It is even possible to
+	  run globally visible servers from within a masqueraded local network
+	  using a mechanism called portforwarding. Masquerading is also often
+	  called NAT (Network Address Translation).
+
+	  Another use of Netfilter is in transparent proxying: if a machine on
+	  the local network tries to connect to an outside host, your Linux
+	  box can transparently forward the traffic to a local server,
+	  typically a caching proxy server.
+
+	  Various modules exist for netfilter which replace the previous
+	  masquerading (ipmasqadm), packet filtering (ipchains), transparent
+	  proxying, and portforwarding mechanisms. Please see
+	  <file:Documentation/Changes> under "iptables" for the location of
+	  these packages.
+
+	  Make sure to say N to "Fast switching" below if you intend to say Y
+	  here, as Fast switching currently bypasses netfilter.
+
+	  Chances are that you should say Y here if you compile a kernel which
+	  will run as a router and N for regular hosts. If unsure, say N.
+
+config NETFILTER_DEBUG
+	bool "Network packet filtering debugging"
+	depends on NETFILTER
+	help
+	  You can say Y here if you want to get additional messages useful in
+	  debugging the netfilter code.
+
+config FILTER
+	bool "Socket Filtering"
+	---help---
+	  The Linux Socket Filter is derived from the Berkeley Packet Filter.
+	  If you say Y here, user-space programs can attach a filter to any
+	  socket and thereby tell the kernel that it should allow or disallow
+	  certain types of data to get through the socket.  Linux Socket
+	  Filtering works on all socket types except TCP for now.  See the
+	  text file <file:Documentation/networking/filter.txt> for more
+	  information.
+
+	  You need to say Y here if you want to use PPP packet filtering
+	  (see the CONFIG_PPP_FILTER option below).
+
+	  If unsure, say N.
+
+config UNIX
+	tristate "Unix domain sockets"
+	---help---
+	  If you say Y here, you will include support for Unix domain sockets;
+	  sockets are the standard Unix mechanism for establishing and
+	  accessing network connections.  Many commonly used programs such as
+	  the X Window system and syslog use these sockets even if your
+	  machine is not connected to any network.  Unless you are working on
+	  an embedded system or something similar, you therefore definitely
+	  want to say Y here.
+
+	  However, the socket support is also available as a module ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>. The module will be
+	  called unix.o.  If you try building this as a module and you have
+	  said Y to "Kernel module loader support" above, be sure to add
+	  'alias net-pf-1 unix' to your /etc/modules.conf file. Note that
+	  several important services won't work correctly if you say M here
+	  and then neglect to load the module.
+
+	  Say Y unless you know what you are doing.
+
+config INET
+	bool "TCP/IP networking"
+	---help---
+	  These are the protocols used on the Internet and on most local
+	  Ethernets. It is highly recommended to say Y here (this will enlarge
+	  your kernel by about 144 KB), since some programs (e.g. the X window
+	  system) use TCP/IP even if your machine is not connected to any
+	  other computer. You will get the so-called loopback device which
+	  allows you to ping yourself (great fun, that!).
+
+	  For an excellent introduction to Linux networking, please read the
+	  NET-3-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This option is also necessary if you want to use the full power of
+	  term (term is a program which gives you almost full Internet
+	  connectivity if you have a regular dial up shell account on some
+	  Internet connected Unix computer; for more information, read
+	  <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
+
+	  If you say Y here and also to "/proc file system support" and
+	  "Sysctl support" below, you can change various aspects of the
+	  behavior of the TCP/IP code by writing to the (virtual) files in
+	  /proc/sys/net/ipv4/*; the options are explained in the file
+	  <file:Documentation/networking/ip-sysctl.txt>.
+
+	  Short answer: say Y.
+
+source "net/ipv4/Kconfig"
+
+#   IPv6 as module will cause a CRASH if you try to unload it
+config IPV6
+	tristate "The IPv6 protocol (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	---help---
+	  This is experimental support for the next version of the Internet
+	  Protocol: IP version 6 (also called IPng "IP next generation").
+	  Features of this new protocol include: expanded address space,
+	  authentication and privacy, and seamless interoperability with the
+	  current version of IP (IP version 4). For general information about
+	  IPv6, see <http://playground.sun.com/pub/ipng/html/ipng-main.html>;
+	  for specific information about IPv6 under Linux read the HOWTO at
+	  <http://www.bieringer.de/linux/IPv6/> and the file net/ipv6/README
+	  in the kernel source.
+
+	  If you want to use IPv6, please upgrade to the newest net-tools as
+	  given in <file:Documentation/Changes>. You will still be able to do
+	  regular IPv4 networking as well.
+
+	  This protocol support is also available as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want). The module will be called ipv6.o. If you want to compile it
+	  as a module, say M here and read <file:Documentation/modules.txt>.
+
+	  It is safe to say N here for now.
+
+source "net/ipv6/Kconfig"
+
+source "net/sctp/Kconfig"
+
+config ATM
+	bool "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  ATM is a high-speed networking technology for Local Area Networks
+	  and Wide Area Networks.  It uses a fixed packet size and is
+	  connection oriented, allowing for the negotiation of minimum
+	  bandwidth requirements.
+
+	  In order to participate in an ATM network, your Linux box needs an
+	  ATM networking card. If you have that, say Y here and to the driver
+	  of your ATM card below.
+
+	  Note that you need a set of user-space programs to actually make use
+	  of ATM.  See the file <file:Documentation/networking/atm.txt> for
+	  further details.
+
+config ATM_CLIP
+	bool "Classical IP over ATM (EXPERIMENTAL)"
+	depends on ATM && INET
+	help
+	  Classical IP over ATM for PVCs and SVCs, supporting InARP and
+	  ATMARP. If you want to communication with other IP hosts on your ATM
+	  network, you will typically either say Y here or to "LAN Emulation
+	  (LANE)" below.
+
+config ATM_CLIP_NO_ICMP
+	bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
+	depends on ATM_CLIP
+	help
+	  Normally, an "ICMP host unreachable" message is sent if a neighbour
+	  cannot be reached because there is no VC to it in the kernel's
+	  ATMARP table. This may cause problems when ATMARP table entries are
+	  briefly removed during revalidation. If you say Y here, packets to
+	  such neighbours are silently discarded instead.
+
+config ATM_LANE
+	tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
+	depends on ATM
+	help
+	  LAN Emulation emulates services of existing LANs across an ATM
+	  network. Besides operating as a normal ATM end station client, Linux
+	  LANE client can also act as an proxy client bridging packets between
+	  ELAN and Ethernet segments. You need LANE if you want to try MPOA.
+
+config ATM_MPOA
+	tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
+	depends on ATM && INET && ATM_LANE!=n
+	help
+	  Multi-Protocol Over ATM allows ATM edge devices such as routers,
+	  bridges and ATM attached hosts establish direct ATM VCs across
+	  subnetwork boundaries. These shortcut connections bypass routers
+	  enhancing overall network performance.
+
+config VLAN_8021Q
+	tristate "802.1Q VLAN Support"
+
+config LLC
+	tristate "ANSI/IEEE 802.2 Data link layer protocol (IPX, Appletalk)"
+	help
+	  This is a Logical Link Layer protocol used for Appletalk, IPX and in
+	  the future by NetBEUI and by the linux-sna project. It originally
+	  came from Procom Inc. that released the code for 2.0.36 and was
+	  ported to 2.{4,5}. Select this if you want to have support for
+	  those protocols or if you want to have the sockets interface for
+	  LLC.
+	  
+
+config LLC_UI
+	bool "LLC sockets interface"
+	depends on LLC
+
+config IPX
+	tristate "The IPX protocol"
+	depends on LLC
+	---help---
+	  This is support for the Novell networking protocol, IPX, commonly
+	  used for local networks of Windows machines.  You need it if you
+	  want to access Novell NetWare file or print servers using the Linux
+	  Novell client ncpfs (available from
+	  <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
+	  within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
+	  available from <http://www.linuxdoc.org/docs.html#howto>).  In order
+	  to do the former, you'll also have to say Y to "NCP file system
+	  support", below.
+
+	  IPX is similar in scope to IP, while SPX, which runs on top of IPX,
+	  is similar to TCP. There is also experimental support for SPX in
+	  Linux (see "SPX networking", below).
+
+	  To turn your Linux box into a fully featured NetWare file server and
+	  IPX router, say Y here and fetch either lwared from
+	  <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
+	  mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
+	  information, read the IPX-HOWTO available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  The IPX driver would enlarge your kernel by about 16 KB. This driver
+	  is also available as a module ( = code which can be inserted in and
+	  removed from the running kernel whenever you want).  The module will
+	  be called ipx.o.  If you want to compile it as a module, say M here
+	  and read <file:Documentation/modules.txt>.  Unless you want to
+	  integrate your Linux box with a local Novell network, say N.
+
+source "net/ipx/Kconfig"
+
+config ATALK
+	tristate "Appletalk protocol support"
+	depends on LLC
+	---help---
+	  AppleTalk is the protocol that Apple computers can use to communicate
+	  on a network.  If your Linux box is connected to such a network and you
+	  wish to connect to it, say Y.  You will need to use the netatalk package
+	  so that your Linux box can act as a print and file server for Macs as
+	  well as access AppleTalk printers.  Check out
+	  <http://www.zettabyte.net/netatalk/> on the WWW for details.
+	  EtherTalk is the name used for AppleTalk over Ethernet and the
+	  cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
+	  network using serial links.  EtherTalk and LocalTalk are fully
+	  supported by Linux.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The
+	  NET-3-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+	  information as well.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called appletalk.o.  If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.  You
+	  almost certainly want to compile it as a module so you can restart
+	  your AppleTalk stack without rebooting your machine.  I hear that
+	  the GNU boycott of Apple is over, so even politically correct people
+	  are allowed to say Y here.
+
+source "drivers/net/appletalk/Kconfig"
+
+config DECNET
+	tristate "DECnet Support"
+	---help---
+	  The DECnet networking protocol was used in many products made by
+	  Digital (now Compaq).  It provides reliable stream and sequenced
+	  packet communications over which run a variety of services similar
+	  to those which run over TCP/IP.
+
+	  To find some tools to use with the kernel layer support, please
+	  look at Patrick Caulfield's web site:
+	  <http://linux.dreamtime.org/decnet/>.
+
+	  More detailed documentation is available in
+	  <file:Documentation/networking/decnet.txt>.
+
+	  Be sure to say Y to "/proc file system support" and "Sysctl support"
+	  below when using DECnet, since you will need sysctl support to aid
+	  in configuration at run time.
+
+	  The DECnet code is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module is called decnet.o.
+
+source "net/decnet/Kconfig"
+
+config BRIDGE
+	tristate "802.1d Ethernet Bridging"
+	depends on INET
+	---help---
+	  If you say Y here, then your Linux box will be able to act as an
+	  Ethernet bridge, which means that the different Ethernet segments it
+	  is connected to will appear as one Ethernet to the participants.
+	  Several such bridges can work together to create even larger
+	  networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
+	  As this is a standard, Linux bridges will cooperate properly with
+	  other third party bridge products.
+
+	  In order to use the Ethernet bridge, you'll need the bridge
+	  configuration tools; see <file:Documentation/networking/bridge.txt>
+	  for location. Please read the Bridge mini-HOWTO for more
+	  information.
+
+	  Note that if your box acts as a bridge, it probably contains several
+	  Ethernet devices, but the kernel is not able to recognize more than
+	  one at boot time without help; for details read the Ethernet-HOWTO,
+	  available from in <http://www.linuxdoc.org/docs.html#howto>.
+
+	  If you want to compile this code as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called bridge.o.
+
+	  If unsure, say N.
+
+source "net/bridge/netfilter/Kconfig"
+
+config X25
+	tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  X.25 is a set of standardized network protocols, similar in scope to
+	  frame relay; the one physical line from your box to the X.25 network
+	  entry point can carry several logical point-to-point connections
+	  (called "virtual circuits") to other computers connected to the X.25
+	  network. Governments, banks, and other organizations tend to use it
+	  to connect to each other or to form Wide Area Networks (WANs). Many
+	  countries have public X.25 networks. X.25 consists of two
+	  protocols: the higher level Packet Layer Protocol (PLP) (say Y here
+	  if you want that) and the lower level data link layer protocol LAPB
+	  (say Y to "LAPB Data Link Driver" below if you want that).
+
+	  You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
+	  <http://www.cisco.com/univercd/data/doc/software/11_0/rpcg/cx25.htm>.
+	  Information about X.25 for Linux is contained in the files
+	  <file:Documentation/networking/x25.txt> and
+	  <file:Documentation/networking/x25-iface.txt>.
+
+	  One connects to an X.25 network either with a dedicated network card
+	  using the X.21 protocol (not yet supported by Linux) or one can do
+	  X.25 over a standard telephone line using an ordinary modem (say Y
+	  to "X.25 async driver" below) or over Ethernet using an ordinary
+	  Ethernet card and either the 802.2 LLC protocol (say Y to "802.2
+	  LLC" below) or LAPB over Ethernet (say Y to "LAPB Data Link Driver"
+	  and "LAPB over Ethernet driver" below).
+
+	  If you want to compile this driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called x25.o. If unsure, say N.
+
+config LAPB
+	tristate "LAPB Data Link Driver (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
+	  the lower) part of the X.25 protocol. It offers a reliable
+	  connection service to exchange data frames with one other host, and
+	  it is used to transport higher level protocols (mostly X.25 Packet
+	  Layer, the higher part of X.25, but others are possible as well).
+	  Usually, LAPB is used with specialized X.21 network cards, but Linux
+	  currently supports LAPB only over Ethernet connections. If you want
+	  to use LAPB connections over Ethernet, say Y here and to "LAPB over
+	  Ethernet driver" below. Read
+	  <file:Documentation/networking/lapb-module.txt> for technical
+	  details.
+
+	  If you want to compile this driver as a module though ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want), say M here and read <file:Documentation/modules.txt>.  The
+	  module will be called lapb.o.  If unsure, say N.
+
+config NET_DIVERT
+	bool "Frame Diverter (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	---help---
+	  The Frame Diverter allows you to divert packets from the
+	  network, that are not aimed at the interface receiving it (in
+	  promisc. mode). Typically, a Linux box setup as an Ethernet bridge
+	  with the Frames Diverter on, can do some *really* transparent www
+	  caching using a Squid proxy for example.
+
+	  This is very useful when you don't want to change your router's
+	  config (or if you simply don't have access to it).
+
+	  The other possible usages of diverting Ethernet Frames are
+	  numberous:
+	  - reroute smtp traffic to another interface
+	  - traffic-shape certain network streams
+	  - transparently proxy smtp connections
+	  - etc...
+
+	  For more informations, please refer to:
+	  <http://diverter.sourceforge.net/>
+	  <http://perso.wanadoo.fr/magpie/EtherDivert.html>
+
+	  If unsure, say N.
+
+config ECONET
+	tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && INET
+	---help---
+	  Econet is a fairly old and slow networking protocol mainly used by
+	  Acorn computers to access file and print servers. It uses native
+	  Econet network cards. AUN is an implementation of the higher level
+	  parts of Econet that runs over ordinary Ethernet connections, on
+	  top of the UDP packet protocol, which in turn runs on top of the
+	  Internet protocol IP.
+
+	  If you say Y here, you can choose with the next two options whether
+	  to send Econet/AUN traffic over a UDP Ethernet connection or over
+	  a native Econet network card.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called econet.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+config ECONET_AUNUDP
+	bool "AUN over UDP"
+	depends on ECONET
+	help
+	  Say Y here if you want to send Econet/AUN traffic over a UDP
+	  connection (UDP is a packet based protocol that runs on top of the
+	  Internet protocol IP) using an ordinary Ethernet network card.
+
+config ECONET_NATIVE
+	bool "Native Econet"
+	depends on ECONET
+	help
+	  Say Y here if you have a native Econet network card installed in
+	  your computer.
+
+config WAN_ROUTER
+	tristate "WAN router"
+	depends on EXPERIMENTAL
+	---help---
+	  Wide Area Networks (WANs), such as X.25, frame relay and leased
+	  lines, are used to interconnect Local Area Networks (LANs) over vast
+	  distances with data transfer rates significantly higher than those
+	  achievable with commonly used asynchronous modem connections.
+	  Usually, a quite expensive external device called a `WAN router' is
+	  needed to connect to a WAN.
+
+	  As an alternative, WAN routing can be built into the Linux kernel.
+	  With relatively inexpensive WAN interface cards available on the
+	  market, a perfectly usable router can be built for less than half
+	  the price of an external router.  If you have one of those cards and
+	  wish to use your Linux box as a WAN router, say Y here and also to
+	  the WAN driver for your card, below.  You will then need the
+	  wan-tools package which is available from <ftp://ftp.sangoma.com/>.
+	  Read <file:Documentation/networking/wan-router.txt> for more
+	  information.
+
+	  The WAN routing support is also available as a module called
+	  wanrouter.o ( = code which can be inserted in and removed from the
+	  running kernel whenever you want).  If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+	  If unsure, say N.
+
+config NET_FASTROUTE
+	bool "Fast switching (read help!)"
+	depends on EXPERIMENTAL
+	---help---
+	  Saying Y here enables direct NIC-to-NIC (NIC = Network Interface
+	  Card) data transfers on the local network, which is fast.
+
+	  IMPORTANT NOTE: This option is NOT COMPATIBLE with "Network packet
+	  filtering" (CONFIG_NETFILTER). Say N here if you say Y there.
+
+	  However, it will work with all options in the "Advanced router"
+	  section (except for "Use TOS value as routing key" and
+	  "Use FWMARK value as routing key").
+
+	  At the moment, few devices support fast switching (tulip is one of
+	  them, a modified 8390 driver can be found at
+	  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
+
+	  If unsure, say N.
+
+config NET_HW_FLOWCONTROL
+	bool "Forwarding between high speed interfaces"
+	depends on EXPERIMENTAL
+	---help---
+	  This option enables NIC (Network Interface Card) hardware throttling
+	  during periods of extremal congestion. At the moment only a couple
+	  of device drivers support it (really only one -- tulip, a modified
+	  8390 driver can be found at
+	  <ftp://ftp.inr.ac.ru/ip-routing/fastroute/fastroute-8390.tar.gz>).
+
+	  Really, this option is applicable to any machine attached to a fast
+	  enough network, and even a 10 Mb NIC is able to kill a not very slow
+	  box, such as a 120MHz Pentium.
+
+	  However, do not say Y here if you did not experience any serious
+	  problems.
+
+
+menu "QoS and/or fair queueing"
+
+config NET_SCHED
+	bool "QoS and/or fair queueing"
+	---help---
+	  When the kernel has several packets to send out over a network
+	  device, it has to decide which ones to send first, which ones to
+	  delay, and which ones to drop. This is the job of the packet
+	  scheduler, and several different algorithms for how to do this
+	  "fairly" have been proposed.
+
+	  If you say N here, you will get the standard packet scheduler, which
+	  is a FIFO (first come, first served). If you say Y here, you will be
+	  able to choose from among several alternative algorithms which can
+	  then be attached to different network devices. This is useful for
+	  example if some of your network devices are real time devices that
+	  need a certain minimum data flow rate, or if you need to limit the
+	  maximum data flow rate for traffic which matches specified criteria.
+	  This code is considered to be experimental.
+
+	  To administer these schedulers, you'll need the user-level utilities
+	  from the package iproute2+tc at <ftp://ftp.inr.ac.ru/ip-routing/>.
+	  That package also contains some documentation; for more, check out
+	  <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
+
+	  This Quality of Service (QoS) support will enable you to use
+	  Differentiated Services (diffserv) and Resource Reservation Protocol
+	  (RSVP) on your Linux router if you also say Y to "QoS support",
+	  "Packet classifier API" and to some classifiers below. Documentation
+	  and software is at <http://icawww1.epfl.ch/linux-diffserv/>.
+
+	  If you say Y here and to "/proc file system" below, you will be able
+	  to read status information about packet schedulers from the file
+	  /proc/net/psched.
+
+	  The available schedulers are listed in the following questions; you
+	  can say Y to as many as you like. If unsure, say N now.
+
+source "net/sched/Kconfig"
+
+#bool 'Network code profiler' CONFIG_NET_PROFILE
+endmenu
+
+endmenu
+

net/ax25/Kconfig

+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130	Now in an own category to make correct compilation of the
+#		AX.25 stuff easier...
+#		Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129	Moved to net/ax25/Config.in, sourcing device drivers.
+
+menu "Amateur Radio support"
+
+config HAMRADIO
+	bool "Amateur Radio support"
+	help
+	  If you want to connect your Linux box to an amateur radio, answer Y
+	  here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+	  the AX25-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about amateur radio.
+
+comment "Packet Radio protocols"
+	depends on HAMRADIO && NET
+
+config AX25
+	tristate "Amateur Radio AX.25 Level 2 protocol"
+	depends on HAMRADIO && NET
+	---help---
+	  This is the protocol used for computer communication over amateur
+	  radio. It is either used by itself for point-to-point links, or to
+	  carry other protocols such as tcp/ip. To use it, you need a device
+	  that connects your Linux box to your amateur radio. You can either
+	  use a low speed TNC (a Terminal Node Controller acts as a kind of
+	  modem connecting your computer's serial port to your radio's
+	  microphone input and speaker output) supporting the KISS protocol or
+	  one of the various SCC cards that are supported by the generic Z8530
+	  or the DMA SCC driver. Another option are the Baycom modem serial
+	  and parallel port hacks or the sound card modem (supported by their
+	  own drivers). If you say Y here, you also have to say Y to one of
+	  those drivers.
+
+	  Information about where to get supporting software for Linux amateur
+	  radio as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>. You might also want to
+	  check out the file <file:Documentation/networking/ax25.txt> in the
+	  kernel source. More information about digital amateur radio in
+	  general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called ax25.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+config AX25_DAMA_SLAVE
+	bool "AX.25 DAMA Slave support"
+	depends on AX25
+	help
+	  DAMA is a mechanism to prevent collisions when doing AX.25
+	  networking. A DAMA server (called "master") accepts incoming traffic
+	  from clients (called "slaves") and redistributes it to other slaves.
+	  If you say Y here, your Linux box will act as a DAMA slave; this is
+	  transparent in that you don't have to do any special DAMA
+	  configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+	  say N.
+
+#	 bool '    AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+	tristate "Amateur Radio NET/ROM protocol"
+	depends on AX25
+	---help---
+	  NET/ROM is a network layer protocol on top of AX.25 useful for
+	  routing.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>. You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called netrom.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+config ROSE
+	tristate "Amateur Radio X.25 PLP (Rose)"
+	depends on AX25
+	---help---
+	  The Packet Layer Protocol (PLP) is a way to route packets over X.25
+	  connections in general and amateur radio AX.25 connections in
+	  particular, essentially an alternative to NET/ROM.
+
+	  A comprehensive listing of all the software for Linux amateur radio
+	  users as well as information about how to configure an AX.25 port is
+	  contained in the AX25-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.  You also might want to
+	  check out the file <file:Documentation/networking/ax25.txt>. More
+	  information about digital amateur radio in general is on the WWW at
+	  <http://www.tapr.org/tapr/html/pkthome.html>.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want).
+	  The module will be called rose.o. If you want to compile it as a
+	  module, say M here and read <file:Documentation/modules.txt>.
+
+
+menu "AX.25 network device drivers"
+	depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+
+endmenu
+

net/bluetooth/Kconfig

+#
+# Bluetooth subsystem configuration
+#
+
+menu "Bluetooth support"
+	depends on NET
+
+config BT
+	tristate "Bluetooth subsystem support"
+	---help---
+	  Bluetooth is low-cost, low-power, short-range wireless technology.
+	  It was designed as a replacement for cables and other short-range
+	  technologies like IrDA.  Bluetooth operates in personal area range
+	  that typically extends up to 10 meters.  More information about
+	  Bluetooth can be found at <http://www.bluetooth.com/>.
+
+	  Linux Bluetooth subsystem consist of several layers:
+	  Bluetooth Core (HCI device and connection manager, scheduler)
+	  HCI Device drivers (interface to the hardware)
+	  L2CAP Module (L2CAP protocol)
+	  SCO Module (SCO links)
+	  RFCOMM Module (RFCOMM protocol)  
+	  BNEP Module (BNEP protocol)
+
+	  Say Y here to enable Linux Bluetooth support and to build Bluetooth Core
+	  layer.
+
+	  To use Linux Bluetooth subsystem, you will need several user-space
+	  utilities like hciconfig and hcid.  These utilities and updates to
+	  Bluetooth kernel modules are provided in the BlueZ packages.
+	  For more information, see <http://bluez.sourceforge.net/>.
+
+	  If you want to compile Bluetooth Core as module (bluetooth.o) say M here.
+
+config BT_L2CAP
+	tristate "L2CAP protocol support"
+	depends on BT
+	help
+	  L2CAP (Logical Link Control and Adaptation Protocol) provides
+	  connection oriented and connection-less data transport.  L2CAP
+	  support is required for most Bluetooth applications.
+
+	  Say Y here to compile L2CAP support into the kernel or say M to
+	  compile it as module (l2cap.o).
+
+config BT_SCO
+	tristate "SCO links support"
+	depends on BT
+	help
+	  SCO link provides voice transport over Bluetooth. SCO support is
+	  required for voice applications like Headset and Audio.
+
+	  Say Y here to compile SCO support into the kernel or say M to
+	  compile it as module (sco.o).
+
+source "net/bluetooth/rfcomm/Kconfig"
+
+source "net/bluetooth/bnep/Kconfig"
+
+source "drivers/bluetooth/Kconfig"
+
+endmenu
+

net/bluetooth/bnep/Kconfig

+config BT_BNEP
+	tristate "BNEP protocol support"
+	depends on BT_L2CAP
+	---help---
+	  BNEP (Bluetooth Network Encapsulation Protocol) is Ethernet
+	  emulation layer on top of Bluetooth. BNEP is required for Bluetooth
+	  PAN (Personal Area Network).
+
+	  To use BNEP, you will need user-space utilities provided in the 
+	  BlueZ-PAN package.
+	  For more information, see <http://bluez.sourceforge.net>.
+
+	  Say Y here to compile BNEP support into the kernel or say M to
+	  compile it as module (bnep.o).
+
+config BT_BNEP_MC_FILTER
+	bool "Multicast filter support"
+	depends on BT_BNEP
+	help
+	  This option enables the multicast filter support for BNEP.
+
+config BT_BNEP_PROTO_FILTER
+	bool "Protocol filter support"
+	depends on BT_BNEP
+	help
+	  This option enables the protocol filter support for BNEP.
+

net/bluetooth/rfcomm/Kconfig

+config BT_RFCOMM
+	tristate "RFCOMM protocol support"
+	depends on BT_L2CAP
+	help
+	  RFCOMM provides connection oriented stream transport. RFCOMM
+	  support is required for Dialup Networking, OBEX and other Bluetooth
+	  applications.
+
+	  Say Y here to compile RFCOMM support into the kernel or say M to
+	  compile it as module (rfcomm.o).
+
+config BT_RFCOMM_TTY
+	bool "RFCOMM TTY support"
+	depends on BT_RFCOMM
+	help
+	  This option enables TTY emulation support for RFCOMM channels.
+

net/bridge/netfilter/Kconfig

+#
+# Bridge netfilter configuration
+#
+config BRIDGE_NF_EBTABLES
+	tristate "Bridge: ebtables"
+	depends on NETFILTER && BRIDGE
+
+config BRIDGE_EBT_T_FILTER
+	tristate "ebt: filter table support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  The ebtables filter table is used to define frame filtering rules at
+	  local input, forwarding and local output. See the man page for
+	  ebtables(8).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_T_NAT
+	tristate "ebt: nat table support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  The ebtables nat table is used to define rules that alter the MAC
+	  source address (MAC SNAT) or the MAC destination address (MAC DNAT).
+	  See the man page for ebtables(8).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_BROUTE
+	tristate "ebt: broute table support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  The ebtables broute table is used to define rules that decide between
+	  bridging and routing frames, giving Linux the functionality of a
+	  brouter. See the man page for ebtables(8) and examples on the ebtables
+	  website.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_LOG
+	tristate "ebt: log support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the log target, that you can use in any rule in
+	  any ebtables table. It records the frame header to the syslog.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_IPF
+	tristate "ebt: IP filter support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the IP match, which allows basic IP header field
+	  filtering.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_ARPF
+	tristate "ebt: ARP filter support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the ARP match, which allows ARP and RARP header field
+	  filtering.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_VLANF
+	tristate "ebt: 802.1Q VLAN filter support (EXPERIMENTAL)"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the 802.1Q vlan match, which allows the filtering of
+	  802.1Q vlan fields.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_MARKF
+	tristate "ebt: mark filter support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the mark match, which allows matching frames based on
+	  the 'nfmark' value in the frame. This can be set by the mark target.
+	  This value is the same as the one used in the iptables mark match and
+	  target.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_SNAT
+	tristate "ebt: snat target support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the MAC SNAT target, which allows altering the MAC
+	  source address of frames.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_DNAT
+	tristate "ebt: dnat target support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the MAC DNAT target, which allows altering the MAC
+	  destination address of frames.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_REDIRECT
+	tristate "ebt: redirect target support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the MAC redirect target, which allows altering the MAC
+	  destination address of a frame to that of the device it arrived on.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config BRIDGE_EBT_MARK_T
+	tristate "ebt: mark target support"
+	depends on BRIDGE_NF_EBTABLES
+	help
+	  This option adds the mark target, which allows marking frames by
+	  setting the 'nfmark' value in the frame.
+	  This value is the same as the one used in the iptables mark match and
+	  target.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+

net/decnet/Kconfig

+#
+# DECnet configuration
+#
+config DECNET_SIOCGIFCONF
+	bool "DECnet: SIOCGIFCONF support"
+	depends on DECNET
+	help
+	  This option should only be turned on if you are really sure that
+	  you know what you are doing. It can break other applications which
+	  use this system call and the proper way to get the information
+	  provided by this call is to use rtnetlink.
+
+	  If unsure, say N.
+
+config DECNET_ROUTER
+	bool "DECnet: router support (EXPERIMENTAL)"
+	depends on DECNET && EXPERIMENTAL
+	---help---
+	  Add support for turning your DECnet Endnode into a level 1 or 2
+	  router.  This is an unfinished option for developers only.  If you
+	  do say Y here, then make sure that you also say Y to "Kernel/User
+	  network link driver", "Routing messages" and "Network packet
+	  filtering".  The first two are required to allow configuration via
+	  rtnetlink (currently you need Alexey Kuznetsov's iproute2 package
+	  from <ftp://ftp.inr.ac.ru/>). The "Network packet filtering" option
+	  will be required for the forthcoming routing daemon to work.
+
+	  See <file:Documentation/networking/decnet.txt> for more information.
+
+config DECNET_ROUTE_FWMARK
+	bool "DECnet: use FWMARK value as routing key (EXPERIMENTAL)"
+	depends on DECNET_ROUTER && NETFILTER
+	help
+	  If you say Y here, you will be able to specify different routes for
+	  packets with different FWMARK ("firewalling mark") values
+	  (see ipchains(8), "-m" argument).
+

net/ipv4/Kconfig

+#
+# IP configuration
+#
+config IP_MULTICAST
+	bool "IP: multicasting"
+	depends on INET
+	help
+	  This is code for addressing several networked computers at once,
+	  enlarging your kernel by about 2 KB. You need multicasting if you
+	  intend to participate in the MBONE, a high bandwidth network on top
+	  of the Internet which carries audio and video broadcasts. More
+	  information about the MBONE is on the WWW at
+	  <http://www-itg.lbl.gov/mbone/>. Information about the multicast
+	  capabilities of the various network cards is contained in
+	  <file:Documentation/networking/multicast.txt>. For most people, it's
+	  safe to say N.
+
+config IP_ADVANCED_ROUTER
+	bool "IP: advanced router"
+	depends on INET
+	---help---
+	  If you intend to run your Linux box mostly as a router, i.e. as a
+	  computer that forwards and redistributes network packets, say Y; you
+	  will then be presented with several options that allow more precise
+	  control about the routing process.
+
+	  The answer to this question won't directly affect the kernel:
+	  answering N will just cause the configurator to skip all the
+	  questions about advanced routing.
+
+	  Note that your box can only act as a router if you enable IP
+	  forwarding in your kernel; you can do that by saying Y to "/proc
+	  file system support" and "Sysctl support" below and executing the
+	  line
+
+	  echo "1" > /proc/sys/net/ipv4/ip_forward
+
+	  at boot time after the /proc file system has been mounted.
+
+	  If you turn on IP forwarding, you will also get the rp_filter, which
+	  automatically rejects incoming packets if the routing table entry
+	  for their source address doesn't match the network interface they're
+	  arriving on. This has security advantages because it prevents the
+	  so-called IP spoofing, however it can pose problems if you use
+	  asymmetric routing (packets from you to a host take a different path
+	  than packets from that host to you) or if you operate a non-routing
+	  host which has several IP addresses on different interfaces. To turn
+	  rp_filter off use:
+
+	  echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter
+	  or
+	  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
+
+	  If unsure, say N here.
+
+config IP_MULTIPLE_TABLES
+	bool "IP: policy routing"
+	depends on IP_ADVANCED_ROUTER
+	---help---
+	  Normally, a router decides what to do with a received packet based
+	  solely on the packet's final destination address. If you say Y here,
+	  the Linux router will also be able to take the packet's source
+	  address into account. Furthermore, if you also say Y to "Use TOS
+	  value as routing key" below, the TOS (Type-Of-Service) field of the
+	  packet can be used for routing decisions as well. In addition, if
+	  you say Y here and to "Fast network address translation" below,
+	  the router will also be able to modify source and destination
+	  addresses of forwarded packets.
+
+	  If you are interested in this, please see the preliminary
+	  documentation at <http://www.compendium.com.ar/policy-routing.txt>
+	  and <ftp://post.tepkom.ru/pub/vol2/Linux/docs/advanced-routing.tex>.
+	  You will need supporting software from
+	  <ftp://ftp.inr.ac.ru/ip-routing/>.
+
+	  If unsure, say N.
+
+config IP_ROUTE_FWMARK
+	bool "IP: use netfilter MARK value as routing key"
+	depends on IP_MULTIPLE_TABLES && NETFILTER
+	help
+	  If you say Y here, you will be able to specify different routes for
+	  packets with different mark values (see iptables(8), MARK target).
+
+config IP_ROUTE_NAT
+	bool "IP: fast network address translation"
+	depends on IP_MULTIPLE_TABLES
+	help
+	  If you say Y here, your router will be able to modify source and
+	  destination addresses of packets that pass through it, in a manner
+	  you specify.  General information about Network Address Translation
+	  can be gotten from the document
+	  <http://www.csn.tu-chemnitz.de/~mha/linux-ip-nat/diplom/nat.html>.
+
+config IP_ROUTE_MULTIPATH
+	bool "IP: equal cost multipath"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  Normally, the routing tables specify a single action to be taken in
+	  a deterministic manner for a given packet. If you say Y here
+	  however, it becomes possible to attach several actions to a packet
+	  pattern, in effect specifying several alternative paths to travel
+	  for those packets. The router considers all these paths to be of
+	  equal "cost" and chooses one of them in a non-deterministic fashion
+	  if a matching packet arrives.
+
+config IP_ROUTE_TOS
+	bool "IP: use TOS value as routing key"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  The header of every IP packet carries a TOS (Type Of Service) value
+	  with which the packet requests a certain treatment, e.g. low
+	  latency (for interactive traffic), high throughput, or high
+	  reliability.  If you say Y here, you will be able to specify
+	  different routes for packets with different TOS values.
+
+config IP_ROUTE_VERBOSE
+	bool "IP: verbose route monitoring"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  If you say Y here, which is recommended, then the kernel will print
+	  verbose messages regarding the routing, for example warnings about
+	  received packets which look strange and could be evidence of an
+	  attack or a misconfigured system somewhere. The information is
+	  handled by the klogd daemon which is responsible for kernel messages
+	  ("man klogd").
+
+config IP_ROUTE_LARGE_TABLES
+	bool "IP: large routing tables"
+	depends on IP_ADVANCED_ROUTER
+	help
+	  If you have routing zones that grow to more than about 64 entries,
+	  you may want to say Y here to speed up the routing process.
+
+config IP_PNP
+	bool "IP: kernel level autoconfiguration"
+	depends on INET
+	help
+	  This enables automatic configuration of IP addresses of devices and
+	  of the routing table during kernel boot, based on either information
+	  supplied on the kernel command line or by BOOTP or RARP protocols.
+	  You need to say Y only for diskless machines requiring network
+	  access to boot (in which case you want to say Y to "Root file system
+	  on NFS" as well), because all other machines configure the network
+	  in their startup scripts.
+
+config IP_PNP_DHCP
+	bool "IP: DHCP support"
+	depends on IP_PNP
+	---help---
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the DHCP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does DHCP itself, providing all necessary information on the kernel
+	  command line, you can say N here.
+
+	  If unsure, say Y. Note that if you want to use DHCP, a DHCP server
+	  must be operating on your network.  Read
+	  <file:Documentation/nfsroot.txt> for details.
+
+config IP_PNP_BOOTP
+	bool "IP: BOOTP support"
+	depends on IP_PNP
+	---help---
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the BOOTP protocol (a
+	  special protocol designed for doing this job), say Y here. In case
+	  the boot ROM of your network card was designed for booting Linux and
+	  does BOOTP itself, providing all necessary information on the kernel
+	  command line, you can say N here. If unsure, say Y. Note that if you
+	  want to use BOOTP, a BOOTP server must be operating on your network.
+	  Read <file:Documentation/nfsroot.txt> for details.
+
+config IP_PNP_RARP
+	bool "IP: RARP support"
+	depends on IP_PNP
+	help
+	  If you want your Linux box to mount its whole root file system (the
+	  one containing the directory /) from some other computer over the
+	  net via NFS and you want the IP address of your computer to be
+	  discovered automatically at boot time using the RARP protocol (an
+	  older protocol which is being obsoleted by BOOTP and DHCP), say Y
+	  here. Note that if you want to use RARP, a RARP server must be
+	  operating on your network. Read <file:Documentation/nfsroot.txt> for
+	  details.
+
+# not yet ready..
+#   bool '    IP: ARP support' CONFIG_IP_PNP_ARP		
+config NET_IPIP
+	tristate "IP: tunneling"
+	depends on INET
+	---help---
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  encapsulation of IP within IP, which sounds kind of pointless, but
+	  can be useful if you want to make your (or some other) machine
+	  appear on a different network than it physically is, or to use
+	  mobile-IP facilities (allowing laptops to seamlessly move between
+	  networks without changing their IP addresses; check out
+	  <http://anchor.cs.binghamton.edu/~mobileip/LJ/index.html>).
+
+	  Saying Y to this option will produce two modules ( = code which can
+	  be inserted in and removed from the running kernel whenever you
+	  want). Most people won't need this and can say N.
+
+config NET_IPGRE
+	tristate "IP: GRE tunnels over IP"
+	depends on INET
+	help
+	  Tunneling means encapsulating data of one protocol type within
+	  another protocol and sending it over a channel that understands the
+	  encapsulating protocol. This particular tunneling driver implements
+	  GRE (Generic Routing Encapsulation) and at this time allows
+	  encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure.
+	  This driver is useful if the other endpoint is a Cisco router: Cisco
+	  likes GRE much better than the other Linux tunneling driver ("IP
+	  tunneling" above). In addition, GRE allows multicast redistribution
+	  through the tunnel.
+
+config NET_IPGRE_BROADCAST
+	bool "IP: broadcast GRE over IP"
+	depends on IP_MULTICAST && NET_IPGRE
+	help
+	  One application of GRE/IP is to construct a broadcast WAN (Wide Area
+	  Network), which looks like a normal Ethernet LAN (Local Area
+	  Network), but can be distributed all over the Internet. If you want
+	  to do that, say Y here and to "IP multicast routing" below.
+
+config IP_MROUTE
+	bool "IP: multicast routing"
+	depends on IP_MULTICAST
+	help
+	  This is used if you want your machine to act as a router for IP
+	  packets that have several destination addresses. It is needed on the
+	  MBONE, a high bandwidth network on top of the Internet which carries
+	  audio and video broadcasts. In order to do that, you would most
+	  likely run the program mrouted. Information about the multicast
+	  capabilities of the various network cards is contained in
+	  <file:Documentation/networking/multicast.txt>. If you haven't heard
+	  about it, you don't need it.
+
+config IP_PIMSM_V1
+	bool "IP: PIM-SM version 1 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM (Protocol Independent
+	  Multicast) version 1. This multicast routing protocol is used widely
+	  because Cisco supports it. You need special software to use it
+	  (pimd-v1). Please see <http://netweb.usc.edu/pim/> for more
+	  information about PIM.
+
+	  Say Y if you want to use PIM-SM v1. Note that you can say N here if
+	  you just want to use Dense Mode PIM.
+
+config IP_PIMSM_V2
+	bool "IP: PIM-SM version 2 support"
+	depends on IP_MROUTE
+	help
+	  Kernel side support for Sparse Mode PIM version 2. In order to use
+	  this, you need an experimental routing daemon supporting it (pimd or
+	  gated-5). This routing protocol is not used widely, so say N unless
+	  you want to play with it.
+
+config ARPD
+	bool "IP: ARP daemon support (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	---help---
+	  Normally, the kernel maintains an internal cache which maps IP
+	  addresses to hardware addresses on the local network, so that
+	  Ethernet/Token Ring/ etc. frames are sent to the proper address on
+	  the physical networking layer. For small networks having a few
+	  hundred directly connected hosts or less, keeping this address
+	  resolution (ARP) cache inside the kernel works well. However,
+	  maintaining an internal ARP cache does not work well for very large
+	  switched networks, and will use a lot of kernel memory if TCP/IP
+	  connections are made to many machines on the network.
+
+	  If you say Y here, the kernel's internal ARP cache will never grow
+	  to more than 256 entries (the oldest entries are expired in a LIFO
+	  manner) and communication will be attempted with the user space ARP
+	  daemon arpd. Arpd then answers the address resolution request either
+	  from its own cache or by asking the net.
+
+	  This code is experimental and also obsolete. If you want to use it,
+	  you need to find a version of the daemon arpd on the net somewhere,
+	  and you should also say Y to "Kernel/User network link driver",
+	  below. If unsure, say N.
+
+config INET_ECN
+	bool "IP: TCP Explicit Congestion Notification support"
+	depends on INET
+	---help---
+	  Explicit Congestion Notification (ECN) allows routers to notify
+	  clients about network congestion, resulting in fewer dropped packets
+	  and increased network performance.  This option adds ECN support to
+	  the Linux kernel, as well as a sysctl (/proc/sys/net/ipv4/tcp_ecn)
+	  which allows ECN support to be disabled at runtime.
+
+	  Note that, on the Internet, there are many broken firewalls which
+	  refuse connections from ECN-enabled machines, and it may be a while
+	  before these firewalls are fixed.  Until then, to access a site
+	  behind such a firewall (some of which are major sites, at the time
+	  of this writing) you will have to disable this option, either by
+	  saying N now or by using the sysctl.
+
+	  If in doubt, say N.
+
+config SYN_COOKIES
+	bool "IP: TCP syncookie support (disabled per default)"
+	depends on INET
+	---help---
+	  Normal TCP/IP networking is open to an attack known as "SYN
+	  flooding". This denial-of-service attack prevents legitimate remote
+	  users from being able to connect to your computer during an ongoing
+	  attack and requires very little work from the attacker, who can
+	  operate from anywhere on the Internet.
+
+	  SYN cookies provide protection against this type of attack. If you
+	  say Y here, the TCP/IP stack will use a cryptographic challenge
+	  protocol known as "SYN cookies" to enable legitimate users to
+	  continue to connect, even when your machine is under attack. There
+	  is no need for the legitimate users to change their TCP/IP software;
+	  SYN cookies work transparently to them. For technical information
+	  about SYN cookies, check out <http://cr.yp.to/syncookies.html>.
+
+	  If you are SYN flooded, the source address reported by the kernel is
+	  likely to have been forged by the attacker; it is only reported as
+	  an aid in tracing the packets to their actual source and should not
+	  be taken as absolute truth.
+
+	  SYN cookies may prevent correct error reporting on clients when the
+	  server is really overloaded. If this happens frequently better turn
+	  them off.
+
+	  If you say Y here, note that SYN cookies aren't enabled by default;
+	  you can enable them by saying Y to "/proc file system support" and
+	  "Sysctl support" below and executing the command
+
+	  echo 1 >/proc/sys/net/ipv4/tcp_syncookies
+
+	  at boot time after the /proc file system has been mounted.
+
+	  If unsure, say N.
+
+source "net/ipv4/netfilter/Kconfig"
+

net/ipv4/netfilter/Kconfig

+#
+# IP netfilter configuration
+#
+
+menu "IP: Netfilter Configuration"
+	depends on INET && NETFILTER
+
+config IP_NF_CONNTRACK
+	tristate "Connection tracking (required for masq/NAT)"
+	---help---
+	  Connection tracking keeps a record of what packets have passed
+	  through your machine, in order to figure out how they are related
+	  into connections.
+
+	  This is required to do Masquerading or other kinds of Network
+	  Address Translation (except for Fast NAT).  It can also be used to
+	  enhance packet filtering (see `Connection state match support'
+	  below).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_FTP
+	tristate "FTP protocol support"
+	depends on IP_NF_CONNTRACK
+	help
+	  Tracking FTP connections is problematic: special helpers are
+	  required for tracking them, and doing masquerading and other forms
+	  of Network Address Translation on them.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `Y'.
+
+config IP_NF_IRC
+	tristate "IRC protocol support"
+	depends on IP_NF_CONNTRACK
+	---help---
+	  There is a commonly-used extension to IRC called
+	  Direct Client-to-Client Protocol (DCC).  This enables users to send
+	  files to each other, and also chat to each other without the need
+	  of a server.  DCC Sending is used anywhere you send files over IRC,
+	  and DCC Chat is most commonly used by Eggdrop bots.  If you are
+	  using NAT, this extension will enable you to send files and initiate
+	  chats.  Note that you do NOT need this extension to get files or
+	  have others initiate chats, or everything else in IRC.
+
+	  If you want to compile it as a module, say 'M' here and read
+	  Documentation/modules.txt.  If unsure, say 'N'.
+
+config IP_NF_QUEUE
+	tristate "Userspace queueing via NETLINK (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Netfilter has the ability to queue packets to user space: the
+	  netlink device can be used to access them using this driver.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_IPTABLES
+	tristate "IP tables support (required for filtering/masq/NAT)"
+	help
+	  iptables is a general, extensible packet identification framework.
+	  The packet filtering and full NAT (masquerading, port forwarding,
+	  etc) subsystems now use this: say `Y' or `M' here if you want to use
+	  either of those.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+# The simple matches.
+config IP_NF_MATCH_LIMIT
+	tristate "limit match support"
+	depends on IP_NF_IPTABLES
+	help
+	  limit matching allows you to control the rate at which a rule can be
+	  matched: mainly useful in combination with the LOG target ("LOG
+	  target support", below) and to avoid some Denial of Service attacks.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_MAC
+	tristate "MAC address match support"
+	depends on IP_NF_IPTABLES
+	help
+	  MAC matching allows you to match packets based on the source
+	  Ethernet address of the packet.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_PKTTYPE
+	tristate "Packet type match support"
+	depends on IP_NF_IPTABLES
+	help
+	  This patch allows you to match packet in accrodance
+	  to its "class", eg. BROADCAST, MULTICAST, ...
+
+	  Typical usage:
+	  iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_MATCH_MARK
+	tristate "netfilter MARK match support"
+	depends on IP_NF_IPTABLES
+	help
+	  Netfilter mark matching allows you to match packets based on the
+	  `nfmark' value in the packet.  This can be set by the MARK target
+	  (see below).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_MULTIPORT
+	tristate "Multiple port match support"
+	depends on IP_NF_IPTABLES
+	help
+	  Multiport matching allows you to match TCP or UDP packets based on
+	  a series of source or destination ports: normally a rule can only
+	  match a single range of ports.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_TOS
+	tristate "TOS match support"
+	depends on IP_NF_IPTABLES
+	help
+	  TOS matching allows you to match packets based on the Type Of
+	  Service fields of the IP packet.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_ECN
+	tristate "ECN match support"
+	depends on IP_NF_IPTABLES
+	help
+	  This option adds a `ECN' match, which allows you to match against
+	  the IPv4 and TCP header ECN fields.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_MATCH_DSCP
+	tristate "DSCP match support"
+	depends on IP_NF_IPTABLES
+
+config IP_NF_MATCH_AH_ESP
+	tristate "AH/ESP match support"
+	depends on IP_NF_IPTABLES
+	help
+	  These two match extensions (`ah' and `esp') allow you to match a
+	  range of SPIs inside AH or ESP headers of IPSec packets.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_MATCH_LENGTH
+	tristate "LENGTH match support"
+	depends on IP_NF_IPTABLES
+	help
+	  This option allows you to match the length of a packet against a
+	  specific value or range of values.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_TTL
+	tristate "TTL match support"
+	depends on IP_NF_IPTABLES
+	help
+	  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
+	  to match packets by their TTL value.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_MATCH_TCPMSS
+	tristate "tcpmss match support"
+	depends on IP_NF_IPTABLES
+	help
+	  This option adds a `tcpmss' match, which allows you to examine the
+	  MSS value of TCP SYN packets, which control the maximum packet size
+	  for that connection.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_HELPER
+	tristate "Helper match support"
+	depends on IP_NF_CONNTRACK!=n && IP_NF_IPTABLES
+	help
+	  Helper matching allows you to match packets in dynamic connections
+	  tracked by a conntrack-helper, ie. ip_conntrack_ftp
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `Y'.
+
+config IP_NF_MATCH_STATE
+	tristate "Connection state match support"
+	depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
+	help
+	  Connection state matching allows you to match packets based on their
+	  relationship to a tracked connection (ie. previous packets).  This
+	  is a powerful tool for packet classification.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_CONNTRACK
+	tristate "Connection tracking match support"
+	depends on IP_NF_CONNTRACK && IP_NF_IPTABLES
+	help
+	  This is a general conntrack match module, a superset of the state match.
+
+	  It allows matching on additional conntrack information, which is
+	  useful in complex configurations, such as NAT gateways with multiple
+	  internet links or tunnels.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_MATCH_UNCLEAN
+	tristate "Unclean match support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IP_NF_IPTABLES
+	help
+	  Unclean packet matching matches any strange or invalid packets, by
+	  looking at a series of fields in the IP, TCP, UDP and ICMP headers.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_OWNER
+	tristate "Owner match support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IP_NF_IPTABLES
+	help
+	  Packet owner matching allows you to match locally-generated packets
+	  based on who created them: the user, group, process or session.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_MATCH_PHYSDEV
+	tristate "Physdev match support"
+	depends on IP_NF_IPTABLES!=n && BRIDGE!=n
+	help
+	  Physdev packet matching matches against the physical bridge ports
+	  the IP packet arrived on or will leave by.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+# The targets
+config IP_NF_FILTER
+	tristate "Packet filtering"
+	depends on IP_NF_IPTABLES
+	help
+	  Packet filtering defines a table `filter', which has a series of
+	  rules for simple packet filtering at local input, forwarding and
+	  local output.  See the man page for iptables(8).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_REJECT
+	tristate "REJECT target support"
+	depends on IP_NF_FILTER
+	help
+	  The REJECT target allows a filtering rule to specify that an ICMP
+	  error should be issued in response to an incoming packet, rather
+	  than silently being dropped.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_MIRROR
+	tristate "MIRROR target support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IP_NF_FILTER
+	help
+	  The MIRROR target allows a filtering rule to specify that an
+	  incoming packet should be bounced back to the sender.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_NAT
+	tristate "Full NAT"
+	depends on IP_NF_IPTABLES && IP_NF_CONNTRACK
+	help
+	  The Full NAT option allows masquerading, port forwarding and other
+	  forms of full Network Address Port Translation.  It is controlled by
+	  the `nat' table in iptables: see the man page for iptables(8).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_NAT_NEEDED
+	bool
+	depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y && (IP_NF_COMPAT_IPCHAINS!=y && IP_NF_COMPAT_IPFWADM || IP_NF_COMPAT_IPCHAINS) || IP_NF_IPTABLES && IP_NF_CONNTRACK && IP_NF_NAT
+	default y
+
+config IP_NF_TARGET_MASQUERADE
+	tristate "MASQUERADE target support"
+	depends on IP_NF_NAT
+	help
+	  Masquerading is a special case of NAT: all outgoing connections are
+	  changed to seem to come from a particular interface's address, and
+	  if the interface goes down, those connections are lost.  This is
+	  only useful for dialup accounts with dynamic IP address (ie. your IP
+	  address will be different on next dialup).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_REDIRECT
+	tristate "REDIRECT target support"
+	depends on IP_NF_NAT
+	help
+	  REDIRECT is a special case of NAT: all incoming connections are
+	  mapped onto the incoming interface's address, causing the packets to
+	  come to the local machine instead of passing through.  This is
+	  useful for transparent proxies.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_NAT_LOCAL
+	bool "NAT of local connections (READ HELP)"
+	depends on IP_NF_NAT
+	help
+	  This option enables support for NAT of locally originated connections. 
+	  Enable this if you need to use destination NAT on connections
+	  originating from local processes on the nat box itself.
+
+	  Please note that you will need a recent version (>= 1.2.6a)
+	  of the iptables userspace program in order to use this feature.
+	  See http://www.iptables.org/ for download instructions.
+
+	  If unsure, say 'N'.
+
+config IP_NF_NAT_SNMP_BASIC
+	tristate "Basic SNMP-ALG support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IP_NF_NAT
+	---help---
+
+	  This module implements an Application Layer Gateway (ALG) for
+	  SNMP payloads.  In conjunction with NAT, it allows a network
+	  management system to access multiple private networks with
+	  conflicting addresses.  It works by modifying IP addresses
+	  inside SNMP payloads to match IP-layer NAT mapping.
+
+	  This is the "basic" form of SNMP-ALG, as described in RFC 2962
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_NAT_IRC
+	tristate
+	depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
+	default IP_NF_NAT if IP_NF_IRC=y
+	default m if IP_NF_IRC=m
+
+# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y), 
+# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.  Argh.
+config IP_NF_NAT_FTP
+	tristate
+	depends on IP_NF_IPTABLES!=n && IP_NF_CONNTRACK!=n && IP_NF_NAT!=n
+	default IP_NF_NAT if IP_NF_FTP=y
+	default m if IP_NF_FTP=m
+
+config IP_NF_MANGLE
+	tristate "Packet mangling"
+	depends on IP_NF_IPTABLES
+	help
+	  This option adds a `mangle' table to iptables: see the man page for
+	  iptables(8).  This table is used for various packet alterations
+	  which can effect how the packet is routed.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_TOS
+	tristate "TOS target support"
+	depends on IP_NF_MANGLE
+	help
+	  This option adds a `TOS' target, which allows you to create rules in
+	  the `mangle' table which alter the Type Of Service field of an IP
+	  packet prior to routing.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_ECN
+	tristate "ECN target support"
+	depends on IP_NF_MANGLE
+	---help---
+	  This option adds a `ECN' target, which can be used in the iptables mangle
+	  table.  
+
+	  You can use this target to remove the ECN bits from the IPv4 header of
+	  an IP packet.  This is particularly useful, if you need to work around
+	  existing ECN blackholes on the internet, but don't want to disable
+	  ECN support in general.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_TARGET_DSCP
+	tristate "DSCP target support"
+	depends on IP_NF_MANGLE
+	help
+	  This option adds a `DSCP' match, which allows you to match against
+	  the IPv4 header DSCP field (DSCP codepoint).
+
+	  The DSCP codepoint can have any value between 0x0 and 0x4f.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_TARGET_MARK
+	tristate "MARK target support"
+	depends on IP_NF_MANGLE
+	help
+	  This option adds a `MARK' target, which allows you to create rules
+	  in the `mangle' table which alter the netfilter mark (nfmark) field
+	  associated with the packet prior to routing. This can change
+	  the routing method (see `Use netfilter MARK value as routing
+	  key') and can also be used by other subsystems to change their
+	  behavior.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_LOG
+	tristate "LOG target support"
+	depends on IP_NF_IPTABLES
+	help
+	  This option adds a `LOG' target, which allows you to create rules in
+	  any iptables table which records the packet header to the syslog.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_TARGET_ULOG
+	tristate "ULOG target support"
+	depends on IP_NF_IPTABLES
+	---help---
+	  This option adds a `ULOG' target, which allows you to create rules in
+	  any iptables table. The packet is passed to a userspace logging
+	  daemon using netlink multicast sockets; unlike the LOG target
+	  which can only be viewed through syslog.
+
+	  The apropriate userspace logging daemon (ulogd) may be obtained from
+	  http://www.gnumonks.org/projects/ulogd
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP_NF_TARGET_TCPMSS
+	tristate "TCPMSS target support"
+	depends on IP_NF_IPTABLES
+	---help---
+	  This option adds a `TCPMSS' target, which allows you to alter the
+	  MSS value of TCP SYN packets, to control the maximum size for that
+	  connection (usually limiting it to your outgoing interface's MTU
+	  minus 40).
+
+	  This is used to overcome criminally braindead ISPs or servers which
+	  block ICMP Fragmentation Needed packets.  The symptoms of this
+	  problem are that everything works fine from your Linux
+	  firewall/router, but machines behind it can never exchange large
+	  packets:
+	  	1) Web browsers connect, then hang with no data received.
+	  	2) Small mail works fine, but large emails hang.
+	  	3) ssh works fine, but scp hangs after initial handshaking.
+
+	  Workaround: activate this option and add a rule to your firewall
+	  configuration like:
+
+	  iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \
+	  		 -j TCPMSS --clamp-mss-to-pmtu
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_ARPTABLES
+	tristate "ARP tables support"
+
+config IP_NF_ARPFILTER
+	tristate "ARP packet filtering"
+	depends on IP_NF_ARPTABLES
+
+# Backwards compatibility modules: only if you don't build in the others.
+config IP_NF_COMPAT_IPCHAINS
+	tristate "ipchains (2.2-style) support"
+	depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y
+	help
+	  This option places ipchains (with masquerading and redirection
+	  support) back into the kernel, using the new netfilter
+	  infrastructure.  It is not recommended for new installations (see
+	  `Packet filtering').  With this enabled, you should be able to use
+	  the ipchains tool exactly as in 2.2 kernels.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP_NF_COMPAT_IPFWADM
+	tristate "ipfwadm (2.0-style) support"
+	depends on IP_NF_CONNTRACK!=y && IP_NF_IPTABLES!=y && IP_NF_COMPAT_IPCHAINS!=y
+	help
+	  This option places ipfwadm (with masquerading and redirection
+	  support) back into the kernel, using the new netfilter
+	  infrastructure.  It is not recommended for new installations (see
+	  `Packet filtering').  With this enabled, you should be able to use
+	  the ipfwadm tool exactly as in 2.0 kernels.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+endmenu
+

net/ipv6/Kconfig

+#
+# IPv6 configuration
+# 
+source "net/ipv6/netfilter/Kconfig"
+

net/ipv6/netfilter/Kconfig

+#
+# IP netfilter configuration
+#
+
+menu "IPv6: Netfilter Configuration"
+	depends on INET && EXPERIMENTAL && IPV6!=n && NETFILTER
+
+#tristate 'Connection tracking (required for masq/NAT)' CONFIG_IP6_NF_CONNTRACK
+#if [ "$CONFIG_IP6_NF_CONNTRACK" != "n" ]; then
+#  dep_tristate '  FTP protocol support' CONFIG_IP6_NF_FTP $CONFIG_IP6_NF_CONNTRACK
+#fi
+config IP6_NF_QUEUE
+	tristate "Userspace queueing via NETLINK (EXPERIMENTAL)"
+	---help---
+
+	  This option adds a queue handler to the kernel for IPv6
+	  packets which lets us to receive the filtered packets
+	  with QUEUE target using libiptc as we can do with
+	  the IPv4 now.
+
+	  (C) Fernando Anton 2001
+	  IPv64 Project - Work based in IPv64 draft by Arturo Azcorra.
+	  Universidad Carlos III de Madrid
+	  Universidad Politecnica de Alcala de Henares
+	  email: fanton@it.uc3m.es
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt. If unsure, say `N'.
+
+config IP6_NF_IPTABLES
+	tristate "IP6 tables support (required for filtering/masq/NAT)"
+	help
+	  ip6tables is a general, extensible packet identification framework.
+	  Currently only the packet filtering and packet mangling subsystem
+	  for IPv6 use this, but connection tracking is going to follow.
+	  Say 'Y' or 'M' here if you want to use either of those.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+# The simple matches.
+config IP6_NF_MATCH_LIMIT
+	tristate "limit match support"
+	depends on IP6_NF_IPTABLES
+	help
+	  limit matching allows you to control the rate at which a rule can be
+	  matched: mainly useful in combination with the LOG target ("LOG
+	  target support", below) and to avoid some Denial of Service attacks.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP6_NF_MATCH_MAC
+	tristate "MAC address match support"
+	depends on IP6_NF_IPTABLES
+	help
+	  mac matching allows you to match packets based on the source
+	  Ethernet address of the packet.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP6_NF_MATCH_MULTIPORT
+	tristate "Multiple port match support"
+	depends on IP6_NF_IPTABLES
+	help
+	  Multiport matching allows you to match TCP or UDP packets based on
+	  a series of source or destination ports: normally a rule can only
+	  match a single range of ports.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP6_NF_MATCH_OWNER
+	tristate "Owner match support (EXPERIMENTAL)"
+	depends on IP6_NF_IPTABLES
+	help
+	  Packet owner matching allows you to match locally-generated packets
+	  based on who created them: the user, group, process or session.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+#  dep_tristate '  MAC address match support' CONFIG_IP6_NF_MATCH_MAC $CONFIG_IP6_NF_IPTABLES
+config IP6_NF_MATCH_MARK
+	tristate "netfilter MARK match support"
+	depends on IP6_NF_IPTABLES
+	help
+	  Netfilter mark matching allows you to match packets based on the
+	  `nfmark' value in the packet.  This can be set by the MARK target
+	  (see below).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP6_NF_MATCH_LENGTH
+	tristate "Packet Length match support"
+	depends on IP6_NF_IPTABLES
+	help
+	  This option allows you to match the length of a packet against a
+	  specific value or range of values.
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+config IP6_NF_MATCH_EUI64
+	tristate "EUI64 address check (EXPERIMENTAL)"
+	depends on IP6_NF_IPTABLES
+	help
+	  This module performs checking on the IPv6 source address
+	  Compares the last 64 bits with the EUI64 (delivered
+	  from the MAC address) address
+
+	  If you want to compile it as a module, say M here and read
+	  Documentation/modules.txt.  If unsure, say `N'.
+
+#  dep_tristate '  Multiple port match support' CONFIG_IP6_NF_MATCH_MULTIPORT $CONFIG_IP6_NF_IPTABLES
+#  dep_tristate '  TOS match support' CONFIG_IP6_NF_MATCH_TOS $CONFIG_IP6_NF_IPTABLES
+#  if [ "$CONFIG_IP6_NF_CONNTRACK" != "n" ]; then
+#    dep_tristate '  Connection state match support' CONFIG_IP6_NF_MATCH_STATE $CONFIG_IP6_NF_CONNTRACK $CONFIG_IP6_NF_IPTABLES 
+#  fi
+#  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+#    dep_tristate '  Unclean match support (EXPERIMENTAL)' CONFIG_IP6_NF_MATCH_UNCLEAN $CONFIG_IP6_NF_IPTABLES
+#    dep_tristate '  Owner match support (EXPERIMENTAL)' CONFIG_IP6_NF_MATCH_OWNER $CONFIG_IP6_NF_IPTABLES
+#  fi
+# The targets
+config IP6_NF_FILTER
+	tristate "Packet filtering"
+	depends on IP6_NF_IPTABLES
+	help
+	  Packet filtering defines a table `filter', which has a series of
+	  rules for simple packet filtering at local input, forwarding and
+	  local output.  See the man page for iptables(8).
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+config IP6_NF_TARGET_LOG
+	tristate "LOG target support"
+	depends on IP6_NF_FILTER
+	help
+	  This option adds a `LOG' target, which allows you to create rules in
+	  any iptables table which records the packet header to the syslog.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+#  if [ "$CONFIG_IP6_NF_FILTER" != "n" ]; then
+#    dep_tristate '    REJECT target support' CONFIG_IP6_NF_TARGET_REJECT $CONFIG_IP6_NF_FILTER
+#    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+#      dep_tristate '    MIRROR target support (EXPERIMENTAL)' CONFIG_IP6_NF_TARGET_MIRROR $CONFIG_IP6_NF_FILTER
+#    fi
+#  fi
+config IP6_NF_MANGLE
+	tristate "Packet mangling"
+	depends on IP6_NF_IPTABLES
+	help
+	  This option adds a `mangle' table to iptables: see the man page for
+	  iptables(8).  This table is used for various packet alterations
+	  which can effect how the packet is routed.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+#    dep_tristate '    TOS target support' CONFIG_IP6_NF_TARGET_TOS $CONFIG_IP_NF_MANGLE
+config IP6_NF_TARGET_MARK
+	tristate "MARK target support"
+	depends on IP6_NF_MANGLE
+	help
+	  This option adds a `MARK' target, which allows you to create rules
+	  in the `mangle' table which alter the netfilter mark (nfmark) field
+	  associated with the packet packet prior to routing. This can change
+	  the routing method (see `Use netfilter MARK value as routing
+	  key') and can also be used by other subsystems to change their
+	  behavior.
+
+	  If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.  If unsure, say `N'.
+
+#dep_tristate '  LOG target support' CONFIG_IP6_NF_TARGET_LOG $CONFIG_IP6_NF_IPTABLES
+endmenu
+

net/ipx/Kconfig

+#
+# IPX configuration
+#
+config IPX_INTERN
+	bool "IPX: Full internal IPX network"
+	depends on IPX
+	---help---
+	  Every IPX network has an address that identifies it. Sometimes it is
+	  useful to give an IPX "network" address to your Linux box as well
+	  (for example if your box is acting as a file server for different
+	  IPX networks: it will then be accessible from everywhere using the
+	  same address). The way this is done is to create a virtual internal
+	  "network" inside your box and to assign an IPX address to this
+	  network. Say Y here if you want to do this; read the IPX-HOWTO at
+	  <http://www.linuxdoc.org/docs.html#howto> for details.
+
+	  The full internal IPX network enables you to allocate sockets on
+	  different virtual nodes of the internal network. This is done by
+	  evaluating the field sipx_node of the socket address given to the
+	  bind call. So applications should always initialize the node field
+	  to 0 when binding a socket on the primary network. In this case the
+	  socket is assigned the default node that has been given to the
+	  kernel when the internal network was created. By enabling the full
+	  internal IPX network the cross-forwarding of packets targeted at
+	  'special' sockets to sockets listening on the primary network is
+	  disabled. This might break existing applications, especially RIP/SAP
+	  daemons. A RIP/SAP daemon that works well with the full internal net
+	  can be found on <ftp://ftp.gwdg.de/pub/linux/misc/ncpfs/>.
+
+	  If you don't know what you are doing, say N.
+

net/irda/Kconfig

+#
+# IrDA protocol configuration
+#
+
+menu "IrDA (infrared) support"
+	depends on NET
+
+config IRDA
+	tristate "IrDA subsystem support"
+	---help---
+	  Say Y here if you want to build support for the IrDA (TM) protocols.
+	  The Infrared Data Associations (tm) specifies standards for wireless
+	  infrared communication and is supported by most laptops and PDA's.
+
+	  To use Linux support for the IrDA (tm) protocols, you will also need
+	  some user-space utilities like irattach.  For more information, see
+	  the file <file:Documentation/networking/irda.txt>.  You also want to
+	  read the IR-HOWTO, available at
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  If you want to exchange bits of data (vCal, vCard) with a PDA, you
+	  will need to install some OBEX application, such as OpenObex :
+	  <http://sourceforge.net/projects/openobex/>
+
+	  This support is also available as a module called irda.o.  If you
+	  want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+comment "IrDA protocols"
+	depends on IRDA
+
+source "net/irda/irlan/Kconfig"
+
+source "net/irda/irnet/Kconfig"
+
+source "net/irda/ircomm/Kconfig"
+
+config IRDA_ULTRA
+	bool "Ultra (connectionless) protocol"
+	depends on IRDA
+	help
+	  Say Y here to support the connectionless Ultra IRDA protocol.
+	  Ultra allows to exchange data over IrDA with really simple devices
+	  (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
+	  no management frames, simple fixed header).
+	  Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
+
+comment "IrDA options"
+	depends on IRDA
+
+config IRDA_CACHE_LAST_LSAP
+	bool "Cache last LSAP"
+	depends on IRDA
+	help
+	  Say Y here if you want IrLMP to cache the last LSAP used.  This
+	  makes sense since most frames will be sent/received on the same
+	  connection.  Enabling this option will save a hash-lookup per frame.
+
+	  If unsure, say Y.
+
+config IRDA_FAST_RR
+	bool "Fast RRs (low latency)"
+	depends on IRDA
+	---help---
+	  Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
+	  when acting as a primary station.
+	  Disabling this option will make latency over IrDA very bad. Enabling
+	  this option will make the IrDA stack send more packet than strictly
+	  necessary, thus reduce your battery life (but not that much).
+
+	  Fast RR will make IrLAP send out a RR frame immediately when
+	  receiving a frame if its own transmit queue is currently empty. This
+	  will give a lot of speed improvement when receiving much data since
+	  the secondary station will not have to wait the max. turn around
+	  time (usually 500ms) before it is allowed to transmit the next time.
+	  If the transmit queue of the secondary is also empty, the primary will
+	  start backing-off before sending another RR frame, waiting longer
+	  each time until the back-off reaches the max. turn around time.
+	  This back-off increase in controlled via
+	  /proc/sys/net/irda/fast_poll_increase
+
+	  If unsure, say Y.
+
+config IRDA_DEBUG
+	bool "Debug information"
+	depends on IRDA
+	help
+	  Say Y here if you want the IrDA subsystem to write debug information
+	  to your syslog. You can change the debug level in
+	  /proc/sys/net/irda/debug .
+	  When this option is enabled, the IrDA also perform many extra internal
+	  verifications which will usually prevent the kernel to crash in case of
+	  bugs.
+
+	  If unsure, say Y (since it makes it easier to find the bugs).
+
+source "drivers/net/irda/Kconfig"
+
+endmenu
+

net/irda/ircomm/Kconfig

+config IRCOMM
+	tristate "IrCOMM protocol"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrCOMM protocol.  If
+	  you want to compile it as a module (you will get ircomm.o and
+	  ircomm-tty.o), say M here and read <file:Documentation/modules.txt>.
+	  IrCOMM implements serial port emulation, and makes it possible to
+	  use all existing applications that understands TTY's with an
+	  infrared link.  Thus you should be able to use application like PPP,
+	  minicom and others.  Enabling this option will create two modules
+	  called ircomm and ircomm_tty.
+

net/irda/irlan/Kconfig

+config IRLAN
+	tristate "IrLAN protocol"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrLAN protocol.  If
+	  you want to compile it as a module (irlan.o), say M here and read
+	  <file:Documentation/modules.txt>.  IrLAN emulates an Ethernet and
+	  makes it possible to put up a wireless LAN using infrared beams.
+
+	  The IrLAN protocol can be used to talk with infrared access points
+	  like the HP NetbeamIR, or the ESI JetEye NET.  You can also connect
+	  to another Linux machine running the IrLAN protocol for ad-hoc
+	  networking!
+

net/irda/irnet/Kconfig

+config IRNET
+	tristate "IrNET protocol"
+	depends on IRDA && PPP
+	help
+	  Say Y here if you want to build support for the IrNET protocol.  If
+	  you want to compile it as a module (irnet.o), say M here and read
+	  <file:Documentation/modules.txt>.  IrNET is a PPP driver, so you
+	  will also need a working PPP subsystem (driver, daemon and
+	  config)...
+
+	  IrNET is an alternate way to tranfer TCP/IP traffic over IrDA.  It
+	  uses synchronous PPP over a set of point to point IrDA sockets.  You
+	  can use it between Linux machine or with W2k.
+

net/sched/Kconfig

+#
+# Traffic control configuration.
+# 
+config NET_SCH_CBQ
+	tristate "CBQ packet scheduler"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to use the Class-Based Queueing (CBQ) packet
+	  scheduling algorithm for some of your network devices.  This
+	  algorithm classifies the waiting packets into a tree-like hierarchy
+	  of classes; the leaves of this tree are in turn scheduled by
+	  separate algorithms (called "disciplines" in this context).
+
+	  See the top of <file:net/sched/sch_cbq.c> for references about the
+	  CBQ algorithm.
+
+	  CBQ is a commonly used scheduler, so if you're unsure, you should
+	  say Y here. Then say Y to all the queueing algorithms below that you
+	  want to use as CBQ disciplines.  Then say Y to "Packet classifier
+	  API" and say Y to all the classifiers you want to use; a classifier
+	  is a routine that allows you to sort your outgoing traffic into
+	  classes based on a certain criterion.
+
+	  This code is also available as a module called sch_cbq.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_HTB
+	tristate "HTB packet scheduler"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to use the Hierarchical Token Buckets (HTB)
+	  packet scheduling algorithm for some of your network devices. See
+	  URL http://luxik.cdi.cz/~devik/qos/htb/ for complete manual and
+	  in-depth articles.
+
+	  HTB is very similar to the CBQ regarding its goals however is has 
+	  different properties and different algorithm.
+
+	  This code is also available as a module called sch_htb.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_CSZ
+	tristate "CSZ packet scheduler"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to use the Clark-Shenker-Zhang (CSZ) packet
+	  scheduling algorithm for some of your network devices.  At the
+	  moment, this is the only algorithm that can guarantee service for
+	  real-time applications (see the top of <file:net/sched/sch_csz.c>
+	  for details and references about the algorithm).
+
+	  Note: this scheduler is currently broken.
+
+	  This code is also available as a module called sch_csz.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+#tristate '  H-PFQ packet scheduler' CONFIG_NET_SCH_HPFQ
+#tristate '  H-FSC packet scheduler' CONFIG_NET_SCH_HFCS
+config NET_SCH_ATM
+	bool "ATM pseudo-scheduler"
+	depends on NET_SCHED && ATM
+	---help---
+	  Say Y here if you want to use the ATM pseudo-scheduler.  This
+	  provides a framework for invoking classifiers (aka "filters"), which
+	  in turn select classes of this queuing discipline.  Each class maps
+	  the flow(s) it is handling to a given virtual circuit (see the top of
+	  <file:net/sched/sch_atm.c>).
+
+	  This code is also available as a module called sch_atm.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_PRIO
+	tristate "The simplest PRIO pseudoscheduler"
+	depends on NET_SCHED
+	help
+	  Say Y here if you want to use an n-band priority queue packet
+	  "scheduler" for some of your network devices or as a leaf discipline
+	  for the CBQ scheduling algorithm. If unsure, say Y.
+
+	  This code is also available as a module called sch_prio.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_RED
+	tristate "RED queue"
+	depends on NET_SCHED
+	help
+	  Say Y here if you want to use the Random Early Detection (RED)
+	  packet scheduling algorithm for some of your network devices (see
+	  the top of <file:net/sched/sch_red.c> for details and references
+	  about the algorithm).
+
+	  This code is also available as a module called sch_red.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_SFQ
+	tristate "SFQ queue"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
+	  packet scheduling algorithm for some of your network devices or as a
+	  leaf discipline for the CBQ scheduling algorithm (see the top of
+	  <file:net/sched/sch_sfq.c> for details and references about the SFQ
+	  algorithm).
+
+	  This code is also available as a module called sch_sfq.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_TEQL
+	tristate "TEQL queue"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to use the True Link Equalizer (TLE) packet
+	  scheduling algorithm for some of your network devices or as a leaf
+	  discipline for the CBQ scheduling algorithm. This queueing
+	  discipline allows the combination of several physical devices into
+	  one virtual device. (see the top of <file:net/sched/sch_teql.c> for
+	  details).
+
+	  This code is also available as a module called sch_teql.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_TBF
+	tristate "TBF queue"
+	depends on NET_SCHED
+	help
+	  Say Y here if you want to use the Simple Token Bucket Filter (TBF)
+	  packet scheduling algorithm for some of your network devices or as a
+	  leaf discipline for the CBQ scheduling algorithm (see the top of
+	  <file:net/sched/sch_tbf.c> for a description of the TBF algorithm).
+
+	  This code is also available as a module called sch_tbf.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_GRED
+	tristate "GRED queue"
+	depends on NET_SCHED
+	help
+	  Say Y here if you want to use the Generic Random Early Detection
+	  (RED) packet scheduling algorithm for some of your network devices
+	  (see the top of <file:net/sched/sch_red.c> for details and
+	  references about the algorithm).
+
+	  This code is also available as a module called sch_gred.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_DSMARK
+	tristate "Diffserv field marker"
+	depends on NET_SCHED
+	help
+	  Say Y if you want to schedule packets avccording to the
+	  Differentiated Services architecture proposed in RFC 2475.
+	  Technical information on this method, with pointers to associated
+	  RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
+
+	  This code is also available as a module called sch_dsmark.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_SCH_INGRESS
+	tristate "Ingress Qdisc"
+	depends on NET_SCHED && NETFILTER
+	help
+	  If you say Y here, you will be able to police incoming bandwidth
+	  and drop packets when this bandwidth exceeds your desired rate.
+	  If unsure, say Y.
+
+	  This code is also available as a module called cls_ingress.o
+	  ( = code which can be inserted in and removed from the running
+	  kernel whenever you want).  If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+config NET_QOS
+	bool "QoS support"
+	depends on NET_SCHED
+	---help---
+	  Say Y here if you want to include Quality Of Service scheduling
+	  features, which means that you will be able to request certain
+	  rate-of-flow limits for your network devices.
+
+	  This Quality of Service (QoS) support will enable you to use
+	  Differentiated Services (diffserv) and Resource Reservation Protocol
+	  (RSVP) on your Linux router if you also say Y to "Packet classifier
+	  API" and to some classifiers below. Documentation and software is at
+	  <http://icawww1.epfl.ch/linux-diffserv/>.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about QoS support.
+
+config NET_ESTIMATOR
+	bool "Rate estimator"
+	depends on NET_QOS
+	help
+	  In order for Quality of Service scheduling to work, the current
+	  rate-of-flow for a network device has to be estimated; if you say Y
+	  here, the kernel will do just that.
+
+config NET_CLS
+	bool "Packet classifier API"
+	depends on NET_SCHED
+	---help---
+	  The CBQ scheduling algorithm requires that network packets which are
+	  scheduled to be sent out over a network device be classified
+	  according to some criterion. If you say Y here, you will get a
+	  choice of several different packet classifiers with the following
+	  questions.
+
+	  This will enable you to use Differentiated Services (diffserv) and
+	  Resource Reservation Protocol (RSVP) on your Linux router.
+	  Documentation and software is at
+	  <http://icawww1.epfl.ch/linux-diffserv/>.
+
+config NET_CLS_TCINDEX
+	tristate "TC index classifier"
+	depends on NET_CLS
+	help
+	  If you say Y here, you will be able to classify outgoing packets
+	  according to the tc_index field of the skb. You will want this
+	  feature if you want to implement Differentiated Services using
+	  sch_dsmark. If unsure, say Y.
+
+	  This code is also available as a module called cls_tcindex.o
+	  ( = code which can be inserted in and removed from the running
+	  kernel whenever you want). If you want to compile it as a module,
+	  say M here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_ROUTE4
+	tristate "Routing table based classifier"
+	depends on NET_CLS
+	help
+	  If you say Y here, you will be able to classify outgoing packets
+	  according to the route table entry they matched. If unsure, say Y.
+
+	  This code is also available as a module called cls_route.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_ROUTE
+	bool
+	depends on NET_CLS_ROUTE4
+	default y
+
+config NET_CLS_FW
+	tristate "Firewall based classifier"
+	depends on NET_CLS
+	help
+	  If you say Y here, you will be able to classify outgoing packets
+	  according to firewall criteria you specified.
+
+	  This code is also available as a module called cls_fw.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_U32
+	tristate "U32 classifier"
+	depends on NET_CLS
+	help
+	  If you say Y here, you will be able to classify outgoing packets
+	  according to their destination address. If unsure, say Y.
+
+	  This code is also available as a module called cls_u32.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_RSVP
+	tristate "Special RSVP classifier"
+	depends on NET_CLS && NET_QOS
+	---help---
+	  The Resource Reservation Protocol (RSVP) permits end systems to
+	  request a minimum and maximum data flow rate for a connection; this
+	  is important for real time data such as streaming sound or video.
+
+	  Say Y here if you want to be able to classify outgoing packets based
+	  on their RSVP requests.
+
+	  This code is also available as a module called cls_rsvp.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_RSVP6
+	tristate "Special RSVP classifier for IPv6"
+	depends on NET_CLS && NET_QOS
+	---help---
+	  The Resource Reservation Protocol (RSVP) permits end systems to
+	  request a minimum and maximum data flow rate for a connection; this
+	  is important for real time data such as streaming sound or video.
+
+	  Say Y here if you want to be able to classify outgoing packets based
+	  on their RSVP requests and you are using the new Internet Protocol
+	  IPv6 as opposed to the older and more common IPv4.
+
+	  This code is also available as a module called cls_rsvp6.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want).  If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config NET_CLS_POLICE
+	bool "Traffic policing (needed for in/egress)"
+	depends on NET_CLS && NET_QOS
+	help
+	  Say Y to support traffic policing (bandwidth limits).  Needed for
+	  ingress and egress rate limiting.
+

net/sctp/Kconfig

+#
+# SCTP configuration
+#
+
+menu "SCTP Configuration (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+
+config IPV6_SCTP__
+	bool
+	default y if IPV6=n
+	default IPV6 if IPV6
+
+config IP_SCTP
+	tristate "The SCTP Protocol (EXPERIMENTAL)"
+	depends on IPV6_SCTP__
+	---help---
+	  Stream Control Transmission Protocol
+
+	  From RFC 2960 (http://www.ietf.org/rfc/rfc2960.txt)
+
+	  "SCTP is a reliable transport protocol operating on top of a
+	  connectionless packet network such as IP.  It offers the following
+	  services to its users:
+
+	  -- acknowledged error-free non-duplicated transfer of user data,
+	  -- data fragmentation to conform to discovered path MTU size,
+	  -- sequenced delivery of user messages within multiple streams,
+	  with an option for order-of-arrival delivery of individual user
+	  messages,
+	  -- optional bundling of multiple user messages into a single SCTP
+	  packet, and
+	  -- network-level fault tolerance through supporting of multi-
+	  homing at either or both ends of an association."
+
+	  This protocol support is also available as a module ( = code which
+	  can be inserted in and removed from the running kernel whenever you
+	  want). The module will be called sctp.o. If you want to compile it
+	  as a module, say M here and read <file:Documentation/modules.txt>.
+
+	  If in doubt, say N.
+
+config SCTP_ADLER32
+	bool "SCTP: Use old checksum (Adler-32)"
+	depends on IP_SCTP
+	help
+	  RCF2960 currently specifies the Adler-32 checksum algorithm for SCTP.  
+	  This has been deprecated and replaced by an algorithm now referred
+	  to as crc32c.
+
+	  If you say Y, this will use the Adler-32 algorithm, this might be useful
+	  for interoperation with downlevel peers. 
+
+	  If unsure, say N.  
+
+config SCTP_DBG_MSG
+	bool "SCTP: Debug messages"
+	depends on IP_SCTP
+	help
+	  If you say Y, this will enable verbose debugging messages. 
+
+	  If unsure, say N.  However, if you are running into problems, use this
+	  option to gather detailed trace information
+
+config SCTP_DBG_OBJCNT
+	bool "SCTP: Debug object counts"
+	depends on IP_SCTP
+	help
+	  If you say Y, this will enable debugging support for counting the types
+	  of objects that are currently allocated.  This is useful for identifying
+	  memory leaks.   If the /proc filesystem is enabled this debug information
+	  can be viewed by 'cat /proc/net/sctp/sctp_dbg_objcnt'
+
+	  If unsure, say N
+
+endmenu
+

security/Kconfig

+#
+# Security configuration
+#
+
+menu "Security options"
+
+config SECURITY_CAPABILITIES
+	bool
+	default y
+	help
+	  This enables the "default" Linux capabilities functionality.
+	  If you are unsure how to answer this question, answer Y.
+
+endmenu
+

sound/Kconfig

+# sound/Config.in
+#
+
+menu "Open Sound System"
+	depends on SOUND!=n
+
+config SOUND_PRIME
+	tristate "Open Sound System"
+	depends on SOUND
+	help
+	  Say 'Y' or 'M' to enable Open Sound System drivers.
+
+source "sound/oss/Kconfig"
+
+endmenu
+
+
+menu "Advanced Linux Sound Architecture"
+	depends on SOUND!=n
+
+config SND
+	tristate "Advanced Linux Sound Architecture"
+	depends on SOUND
+
+source "sound/core/Kconfig"
+
+source "sound/drivers/Kconfig"
+
+source "sound/isa/Kconfig"
+
+source "sound/pci/Kconfig"
+
+source "sound/ppc/Kconfig"
+
+source "sound/arm/Kconfig"
+
+# the following will depenend on the order of config.
+# here assuming USB is defined before ALSA
+source "sound/usb/Kconfig"
+
+source "sound/sparc/Kconfig"
+
+endmenu
+

sound/arm/Kconfig

+# ALSA ARM drivers
+
+menu "ALSA ARM devices"
+	depends on SND!=n && ARM
+
+config SND_SA11XX_UDA1341
+	tristate "SA11xx UDA1341TS driver (H3600)"
+	depends on ARCH_SA1100 && SND && L3
+	help
+	  Say Y or M if you have a Compaq iPaq H3x00 handheld computer and want
+	  to use its Philips UDA 1341 audio chip.
+
+endmenu
+

sound/core/Kconfig

+# ALSA soundcard-configuration
+config SND_BIT32_EMUL
+	tristate "Emulation for 32-bit applications"
+	depends on SND && (SPARC64 || PPC64 || X86_64 && IA32_EMULATION)
+
+config SND_SEQUENCER
+	tristate "Sequencer support"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to enable MIDI sequencer and router support. This feature
+	  allows routing and enqueing MIDI events. Events can be processed at given
+	  time.
+
+config SND_SEQ_DUMMY
+	tristate "Sequencer dummy client"
+	depends on SND_SEQUENCER
+	help
+	  Say 'Y' or 'M' to enable dummy sequencer client. This client is a simple
+	  midi-through client. All normal input events are redirected to output port
+	  immediately.
+
+config SND_OSSEMUL
+	bool "OSS API emulation"
+	depends on SND
+	help
+	  Say 'Y' to enable OSS (Open Sound System) API emulation code.
+
+config SND_MIXER_OSS
+	tristate "OSS Mixer API"
+	depends on SND_OSSEMUL && SND
+	help
+	  Say 'Y' or 'M' to enable mixer OSS API emulation (/dev/mixer*).
+
+config SND_PCM_OSS
+	tristate "OSS PCM (digital audio) API"
+	depends on SND_OSSEMUL && SND
+	help
+	  Say 'Y' or 'M' to enable digital audio (PCM) OSS API emulation (/dev/dsp*).
+
+config SND_SEQUENCER_OSS
+	bool "OSS Sequencer API"
+	depends on SND_OSSEMUL && SND_SEQUENCER
+	help
+	  Say 'Y' or 'M' to enable OSS sequencer emulation (both /dev/sequencer and
+	  /dev/music interfaces).
+
+config SND_RTCTIMER
+	tristate "RTC Timer support"
+	depends on SND && RTC
+	help
+	  Say 'Y' or 'M' to enable RTC timer support for ALSA. ALSA code uses RTC
+	  timer as precise timing source and maps the RTC timer to the ALSA's timer
+	  interface. ALSA sequencer code can also use this timing source.
+
+config SND_VERBOSE_PRINTK
+	bool "Verbose printk"
+	depends on SND
+	help
+	  Say 'Y' to enable verbose log messages. These messages will help to
+	  identify source file and position containing printed messages.
+
+config SND_DEBUG
+	bool "Debug"
+	depends on SND
+	help
+	  Say 'Y' to enable ALSA debug code.
+
+config SND_DEBUG_MEMORY
+	bool "Debug memory"
+	depends on SND_DEBUG
+	help
+	  Say 'Y' to enable debugging of memory allocation.
+
+config SND_DEBUG_DETECT
+	bool "Debug detection"
+	depends on SND_DEBUG
+

sound/drivers/Kconfig

+# ALSA generic drivers
+
+menu "Generic devices"
+	depends on SND!=n
+
+config SND_DUMMY
+	tristate "Dummy (/dev/null) soundcard"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include dummy driver. This driver does nothing, but
+	  emulates various mixer controls and PCM devices.
+	  
+
+config SND_VIRMIDI
+	tristate "Virtual MIDI soundcard"
+	depends on SND_SEQUENCER
+	help
+	  Say 'Y' or 'M' to include virtual MIDI driver. This driver allows to
+	  connect applications using raw MIDI devices to sequencer.
+
+config SND_MTPAV
+	tristate "MOTU MidiTimePiece AV multiport MIDI"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for MOTU MidiTimePiece AV multiport
+	  MIDI adapter.
+
+config SND_SERIAL_U16550
+	tristate "UART16550 - MIDI only driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for MIDI serial port driver. It works
+	  with serial UARTs 16550 and better.
+
+config SND_MPU401
+	tristate "Generic MPU-401 UART driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for MPU401 hardware using UART access.
+
+endmenu
+

sound/isa/Kconfig

+# ALSA ISA drivers
+
+menu "ISA devices"
+	depends on SND!=n && ISA
+
+config SND_AD1816A
+	tristate "Analog Devices SoundPort AD1816A"
+	depends on SND && ISAPNP
+	help
+	  Say 'Y' or 'M' to include support for Analog Devices SoundPort AD1816A or
+	  compatible sound chips.
+
+config SND_AD1848
+	tristate "Generic AD1848/CS4248 driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for AD1848 (Analog Devices) or CS4248 
+	  (Cirrus Logic - Crystal Semiconductors) chips. Please, for newer chips
+	  from Cirrus Logic, use CS4231, CS4232 or CS4236+ driver.
+
+config SND_CS4231
+	tristate "Generic Cirrus Logic CS4231 driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for CS4231 chips from Cirrus Logic -
+	  Crystal Semiconductors.
+
+config SND_CS4232
+	tristate "Generic Cirrus Logic CS4232 driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for CS4232 chips from Cirrus Logic -
+	  Crystal Semiconductors.
+
+config SND_CS4236
+	tristate "Generic Cirrus Logic CS4236+ driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for CS4235,CS4236,CS4237B,CS4238B,CS4239
+	  chips from Cirrus Logic - Crystal Semiconductors.
+
+config SND_ES968
+	tristate "Generic ESS ES968 driver"
+	depends on SND && ISAPNP
+	help
+	  Say 'Y' or 'M' to include support for ESS AudioDrive ES968 chip.
+
+config SND_ES1688
+	tristate "Generic ESS ES688/ES1688 driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ESS AudioDrive ES688 or ES1688 chips.
+
+config SND_ES18XX
+	tristate "Generic ESS ES18xx driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ESS AudioDrive ES18xx chips.
+
+config SND_GUSCLASSIC
+	tristate "Gravis UltraSound Classic"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Gravis UltraSound Classic soundcard.
+
+config SND_GUSEXTREME
+	tristate "Gravis UltraSound Extreme"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Gravis UltraSound Extreme soundcard.
+
+config SND_GUSMAX
+	tristate "Gravis UltraSound MAX"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Gravis UltraSound MAX soundcard.
+
+config SND_INTERWAVE
+	tristate "AMD InterWave, Gravis UltraSound PnP"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for AMD InterWave based soundcards
+	  (Gravis UltraSound Plug & Play, STB SoundRage32, MED3210, Dynasonic Pro,
+	  Panasonic PCA761AW).
+
+config SND_INTERWAVE_STB
+	tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for AMD InterWave based soundcards
+	  with TEA6330T bass and treble regulator (UltraSound 32-Pro).
+
+config SND_OPTI92X_AD1848
+	tristate "OPTi 82C92x - AD1848"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Opti92x soundcards equiped with
+	  AD1848 codec.
+
+config SND_OPTI92X_CS4231
+	tristate "OPTi 82C92x - CS4231"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Opti92x soundcards equiped with
+	  CS4231 codec.
+
+config SND_OPTI93X
+	tristate "OPTi 82C93x"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Opti93x soundcards.
+
+config SND_SB8
+	tristate "Sound Blaster 1.0/2.0/Pro (8-bit)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Sound Blaster 1.0/2.0/Pro (8-bit)
+	  soundcards or 100% compatible from Creative.
+
+config SND_SB16
+	tristate "Sound Blaster 16 (PnP)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Sound Blaster 16 (including
+	  Plug and Play version).
+
+config SND_SBAWE
+	tristate "Sound Blaster AWE (32,64) (PnP)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Sound Blaster AWE (including
+	  Plug and Play version).
+
+config SND_SB16_CSP
+	bool "Sound Blaster 16/AWE CSP support"
+	depends on SND_SB16 || SND_SBAWE
+	help
+	  Say 'Y' to include support for CSP core. This special coprocessor
+	  can do variable tasks like various compression and decompression
+	  algorithms.
+
+config SND_WAVEFRONT
+	tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Turtle Beach Maui, Tropez
+	  and Tropez+ soundcards based on Wavefront chip.
+
+config SND_ALS100
+	tristate "Avance Logic ALS100/ALS120"
+	depends on SND && ISAPNP
+	help
+	  Say 'Y' or 'M' to include support for Avance Logic ALS100, ALS110,
+	  ALS120 and ALS200 soundcards.
+
+config SND_AZT2320
+	tristate "Aztech Systems AZT2320"
+	depends on SND && ISAPNP
+	help
+	  Say 'Y' or 'M' to include support for Aztech Systems AZT2320 soundcard.
+
+config SND_CMI8330
+	tristate "C-Media CMI8330"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for C-Media CMI8330 based soundcards.
+
+config SND_DT019X
+	tristate "Diamond Technologies DT-019X, Avance Logic ALS-007"
+	depends on SND && ISAPNP
+	help
+	  Say 'Y' or 'M' to include support for Diamond Technologies DT-019X and
+	  Avance Logic ALS-007 soundcards.
+
+config SND_OPL3SA2
+	tristate "Yamaha OPL3-SA2/SA3"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Yamaha OPL3SA2 or OPL3SA3 chips.
+
+config SND_SGALAXY
+	tristate "Aztech Sound Galaxy"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Aztech Sound Galaxy.
+
+endmenu
+

sound/oss/Kconfig

+# drivers/sound/Config.in
+#
+# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
+# More hacking for modularisation.
+#
+# Prompt user for primary drivers.
+config SOUND_BT878
+	tristate "BT878 audio dma"
+	depends on SOUND_PRIME!=n && SOUND
+	---help---
+	  Audio DMA support for bt878 based grabber boards.  As you might have
+	  already noticed, bt878 is listed with two functions in /proc/pci.
+	  Function 0 does the video stuff (bt848 compatible), function 1 does
+	  the same for audio data.  This is a driver for the audio part of
+	  the chip.  If you say 'Y' here you get a oss-compatible dsp device
+	  where you can record from.  If you want just watch TV you probably
+	  don't need this driver as most TV cards handle sound with a short
+	  cable from the TV card to your sound card's line-in.
+
+	  This driver is available as a module called btaudio.o ( = code
+	  which can be inserted in and removed from the running kernel
+	  whenever you want). If you want to compile it as a module, say M
+	  here and read <file:Documentation/modules.txt>.
+
+config SOUND_CMPCI
+	tristate "C-Media PCI (CMI8338/8738)"
+	depends on SOUND_PRIME!=n && SOUND && PCI
+	help
+	  Say Y or M if you have a PCI sound card using the CMI8338
+	  or the CMI8378 chipset.  Data on these chips are available at
+	  <http://www.cmedia.com.tw/>.
+
+	  A userspace utility to control some internal registers of these
+	  chips is available at
+	  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+config SOUND_CMPCI_FM
+	bool "Enable legacy FM"
+	depends on SOUND_CMPCI
+
+config SOUND_CMPCI_FMIO
+	hex "FM I/O 388, 3C8, 3E0, 3E8"
+	depends on SOUND_CMPCI_FM
+	default "388"
+
+config SOUND_CMPCI_MIDI
+	bool "Enable legacy MPU-401"
+	depends on SOUND_CMPCI
+
+config SOUND_CMPCI_MPUIO
+	hex "MPU-401 I/O 330, 320, 310, 300"
+	depends on SOUND_CMPCI_MIDI
+	default "330"
+
+config SOUND_CMPCI_JOYSTICK
+	bool "Enable joystick"
+	depends on SOUND_CMPCI
+	help
+	  Say here in order to enable the joystick port on a sound crd using
+	  the CMI8338 or the CMI8738 chipset.  Data on these chips are
+	  available at <http://www.cmedia.com.tw/>.
+
+config SOUND_CMPCI_CM8738
+	bool "Support CMI8738 based audio cards"
+	depends on SOUND_CMPCI
+	help
+	  Say Y or M if you have a PCI sound card using the CMI8338
+	  or the CMI8378 chipset.  Data on this chip is available at
+	  <http://www.cmedia.com.tw/doc8738.htm>.
+
+	  A userspace utility to control some internal registers of these
+	  chips is available at
+	  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+config SOUND_CMPCI_SPDIFINVERSE
+	bool "Inverse S/PDIF in for CMI8738"
+	depends on SOUND_CMPCI_CM8738
+
+config SOUND_CMPCI_SPDIFLOOP
+	bool "Enable S/PDIF loop for CMI8738"
+	depends on SOUND_CMPCI_CM8738
+	help
+	  Enable loopback from SPDIF in to SPDIF out.  For discussion, see
+	  "The 8738 Audio SPDIF In/Out Technical Data" on the technical
+	  support page at <http://www.cmedia.com.tw/>.
+
+	  A userspace utility to control even more internal registers of these
+	  chips is available at
+	  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+	  This package will among other things help you enable SPDIF 
+	  out/in/loop/monitor.
+
+config SOUND_CMPCI_SPEAKERS
+	int "Number of speakers 2, 4, 5, 6"
+	depends on SOUND_CMPCI_CM8738
+	default "2"
+	help
+	  Specify the number of speaker channels you want the card to drive,
+	  as an integer.
+
+config SOUND_CMPCI_LINE_REAR
+	bool "Use Line-in as Read-out"
+	depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
+
+config SOUND_CMPCI_LINE_BASS
+	bool "Use Line-in as Bass"
+	depends on SOUND_CMPCI_CM8738 && SOUND_CMPCI_SPEAKERS!=2
+
+config SOUND_EMU10K1
+	tristate "Creative SBLive! (EMU10K1)"
+	depends on SOUND_PRIME!=n && SOUND && PCI
+	---help---
+	  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
+	  such as the Creative SBLive!, SB PCI512 or Emu-APS.
+
+	  For more information on this driver and the degree of support for the
+	  different card models please check <http://opensource.creative.com/>.
+
+	  It is now possible to load dsp microcode patches into the EMU10K1
+	  chip.  These patches are used to implement real time sound
+	  processing effects which include for example: signal routing,
+	  bass/treble control, AC3 passthrough, ...
+	  Userspace tools to create new patches and load/unload them can be
+	  found at <http://opensource.creative.com/dist.html>.
+
+config MIDI_EMU10K1
+	bool "Creative SBLive! MIDI (EXPERIMENTAL)"
+	depends on SOUND_EMU10K1 && EXPERIMENTAL
+	help
+	  Say Y if you want to be able to use the OSS /dev/sequencer
+	  interface.  This code is still experimental.
+
+config SOUND_FUSION
+	tristate "Crystal SoundFusion (CS4280/461x)"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  This module drives the Crystal SoundFusion devices (CS4280/46xx
+	  series) when wired as native sound drivers with AC97 codecs.  If
+	  this driver does not work try the CS4232 driver.
+
+config SOUND_CS4281
+	tristate "Crystal Sound CS4281"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  Picture and feature list at
+	  <http://www.pcbroker.com/crystal4281.html>.
+
+config SOUND_ES1370
+	tristate "Ensoniq AudioPCI (ES1370)"
+	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+	help
+	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
+	  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
+	  out if your sound card uses an ES1370 without removing your
+	  computer's cover, use lspci -n and look for the PCI ID
+	  1274:5000. Since Ensoniq was bought by Creative Labs,
+	  Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
+	  This driver differs slightly from OSS/Free, so PLEASE READ
+	  <file:Documentation/sound/es1370>.
+
+config SOUND_ES1371
+	tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
+	depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT
+	help
+	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
+	  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
+	  your sound card uses an ES1371 without removing your computer's
+	  cover, use lspci -n and look for the PCI ID 1274:1371. Since
+	  Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
+	  models are either ES1370 or ES1371 based. This driver differs
+	  slightly from OSS/Free, so PLEASE READ
+	  <file:Documentation/sound/es1371>.
+
+config SOUND_ESSSOLO1
+	tristate "ESS Technology Solo1"
+	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+	help
+	  Say Y or M if you have a PCI sound card utilizing the ESS Technology
+	  Solo1 chip. To find out if your sound card uses a
+	  Solo1 chip without removing your computer's cover, use
+	  lspci -n and look for the PCI ID 125D:1969. This driver
+	  differs slightly from OSS/Free, so PLEASE READ
+	  <file:Documentation/sound/solo1>.
+
+config SOUND_MAESTRO
+	tristate "ESS Maestro, Maestro2, Maestro2E driver"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  Say Y or M if you have a sound system driven by ESS's Maestro line
+	  of PCI sound chips.  These include the Maestro 1, Maestro 2, and
+	  Maestro 2E.  See <file:Documentation/sound/Maestro> for more
+	  details.
+
+config SOUND_MAESTRO3
+	tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
+	depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+	help
+	  Say Y or M if you have a sound system driven by ESS's Maestro 3
+	  PCI sound chip.
+
+config SOUND_ICH
+	tristate "Intel ICH (i8xx) audio support"
+	depends on SOUND_PRIME!=n && PCI
+	help
+	  Support for integral audio in Intel's I/O Controller Hub (ICH)
+	  chipset, as used on the 810/820/840 motherboards.
+
+config SOUND_RME96XX
+	tristate "RME Hammerfall (RME96XX) support (EXPERIMENTAL)"
+	depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL
+	help
+	  Say Y or M if you have a Hammerfall, Hammerfall light or Hammerfall
+	  DSP card from RME.
+
+config SOUND_SONICVIBES
+	tristate "S3 SonicVibes"
+	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+	help
+	  Say Y or M if you have a PCI sound card utilizing the S3
+	  SonicVibes chipset. To find out if your sound card uses a
+	  SonicVibes chip without removing your computer's cover, use
+	  lspci -n and look for the PCI ID 5333:CA00. This driver
+	  differs slightly from OSS/Free, so PLEASE READ
+	  <file:Documentation/sound/sonicvibes>.
+
+config SOUND_VWSND
+	tristate "SGI Visual Workstation Sound"
+	depends on SOUND_PRIME!=n && VISWS && SOUND
+	help
+	  Say Y or M if you have an SGI Visual Workstation and you want to be
+	  able to use its on-board audio.  Read
+	  <file:Documentation/sound/vwsnd> for more info on this driver's
+	  capabilities.
+
+config SOUND_VRC5477
+	tristate "NEC Vrc5477 AC97 sound"
+	depends on SOUND_PRIME!=n && DDB5477 && SOUND
+
+config SOUND_TRIDENT
+	tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
+	depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
+	---help---
+	  Say Y or M if you have a PCI sound card utilizing the Trident
+	  4DWave-DX/NX chipset or your mother board chipset has SiS 7018
+	  or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
+	  in SiS960 Super South Bridge and SiS540/630 Single Chipset.
+	  The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
+	  M1535+ or M1535D+ South Bridge.
+
+	  Use lspci -n to find out if your sound card or chipset uses
+	  Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
+	  for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
+	  10B9:5451 stands for ALi5451.
+
+	  This driver supports S/PDIF in/out (record/playback) for ALi 5451
+	  embedded in ALi M1535+ and M1535D+. Note that they aren't all
+	  enabled by default; you can enable them by saying Y to "/proc file
+	  system support" and "Sysctl support", and after the /proc file
+	  system has been mounted, executing the command
+
+	  	command			what is enabled
+
+	  echo 0>/proc/ALi5451	pcm out is also set to S/PDIF out. (Default).
+
+	  echo 1>/proc/ALi5451	use S/PDIF out to output pcm data.
+
+	  echo 2>/proc/ALi5451	use S/PDIF out to output non-pcm data.
+	  (AC3...).
+
+	  echo 3>/proc/ALi5451	record from Ac97 in(MIC, Line in...).
+	  (Default).
+
+	  echo 4>/proc/ALi5451	no matter Ac97 settings, record from S/PDIF
+	  in.
+
+
+	  This driver differs slightly from OSS/Free, so PLEASE READ the
+	  comments at the top of <file:drivers/sound/trident.c>.
+
+config SOUND_MSNDCLAS
+	tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
+	  Monterey (not for the Pinnacle or Fiji).
+
+	  See <file:Documentation/sound/MultiSound> for important information
+	  about this driver.  Note that it has been discontinued, but the
+	  Voyetra Turtle Beach knowledge base entry for it is still available
+	  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/790.asp>.
+
+comment "Compiled-in MSND Classic support requires firmware during compilation."
+	depends on SOUND_PRIME && SOUND_MSNDCLAS=y
+
+config MSNDCLAS_HAVE_BOOT
+	bool
+	depends on SOUND_MSNDCLAS=y
+	default y
+
+config MSNDCLAS_INIT_FILE
+	string "Full pathname of MSNDINIT.BIN firmware file"
+	depends on SOUND_MSNDCLAS
+	default "/etc/sound/msndinit.bin"
+	help
+	  The MultiSound cards have two firmware files which are required for
+	  operation, and are not currently included. These files can be
+	  obtained from Turtle Beach. See
+	  <file:Documentation/sound/MultiSound> for information on how to
+	  obtain this.
+
+config MSNDCLAS_PERM_FILE
+	string "Full pathname of MSNDPERM.BIN firmware file"
+	depends on SOUND_MSNDCLAS
+	default "/etc/sound/msndperm.bin"
+	help
+	  The MultiSound cards have two firmware files which are required for
+	  operation, and are not currently included. These files can be
+	  obtained from Turtle Beach. See
+	  <file:Documentation/sound/MultiSound> for information on how to
+	  obtain this.
+
+config MSNDCLAS_IRQ
+	int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
+	depends on SOUND_MSNDCLAS=y
+	default "5"
+	help
+	  Interrupt Request line for the MultiSound Classic and related cards.
+
+config MSNDCLAS_MEM
+	hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
+	depends on SOUND_MSNDCLAS=y
+	default "D0000"
+	help
+	  Memory-mapped I/O base address for the MultiSound Classic and
+	  related cards.
+
+config MSNDCLAS_IO
+	hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
+	depends on SOUND_MSNDCLAS=y
+	default "290"
+	help
+	  I/O port address for the MultiSound Classic and related cards.
+
+config SOUND_MSNDPIN
+	tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
+	  See <file:Documentation/sound/MultiSound> for important information
+	  about this driver. Note that it has been discontinued, but the
+	  Voyetra Turtle Beach knowledge base entry for it is still available
+	  at <http://www.voyetra-turtle-beach.com/site/kb_ftp/600.asp>.
+
+comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
+	depends on SOUND_PRIME && SOUND_MSNDPIN=y
+
+config MSNDPIN_HAVE_BOOT
+	bool
+	depends on SOUND_MSNDPIN=y
+	default y
+
+config MSNDPIN_INIT_FILE
+	string "Full pathname of PNDSPINI.BIN firmware file"
+	depends on SOUND_MSNDPIN
+	default "/etc/sound/pndspini.bin"
+	help
+	  The MultiSound cards have two firmware files which are required
+	  for operation, and are not currently included. These files can be
+	  obtained from Turtle Beach. See
+	  <file:Documentation/sound/MultiSound> for information on how to
+	  obtain this.
+
+config MSNDPIN_PERM_FILE
+	string "Full pathname of PNDSPERM.BIN firmware file"
+	depends on SOUND_MSNDPIN
+	default "/etc/sound/pndsperm.bin"
+	help
+	  The MultiSound cards have two firmware files which are required for
+	  operation, and are not currently included. These files can be
+	  obtained from Turtle Beach. See
+	  <file:Documentation/sound/MultiSound> for information on how to
+	  obtain this.
+
+config MSNDPIN_IRQ
+	int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
+	depends on SOUND_MSNDPIN=y
+	default "5"
+	help
+	  Interrupt request line for the primary synthesizer on MultiSound
+	  Pinnacle and Fiji sound cards.
+
+config MSNDPIN_MEM
+	hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
+	depends on SOUND_MSNDPIN=y
+	default "D0000"
+	help
+	  Memory-mapped I/O base address for the primary synthesizer on
+	  MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IO
+	hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
+	depends on SOUND_MSNDPIN=y
+	default "290"
+	help
+	  Memory-mapped I/O base address for the primary synthesizer on
+	  MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_DIGITAL
+	bool "MSND Pinnacle has S/PDIF I/O"
+	depends on SOUND_MSNDPIN=y
+	help
+	  If you have the S/PDIF daughter board for the Pinnacle or Fiji,
+	  answer Y here; otherwise, say N. If you have this, you will be able
+	  to play and record from the S/PDIF port (digital signal). See
+	  <file:Documentation/sound/MultiSound> for information on how to make
+	  use of this capability.
+
+config MSNDPIN_NONPNP
+	bool "MSND Pinnacle non-PnP Mode"
+	depends on SOUND_MSNDPIN=y
+	help
+	  The Pinnacle and Fiji card resources can be configured either with
+	  PnP, or through a configuration port. Say Y here if your card is NOT
+	  in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
+	  use of the IDE and joystick peripherals on the card as well; these
+	  do not show up when the card is in PnP mode. Specifying zero for any
+	  resource of a device will disable the device. If you are running the
+	  card in PnP mode, you must say N here and use isapnptools to
+	  configure the card's resources.
+
+comment "MSND Pinnacle DSP section will be configured to above parameters."
+	depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+
+config MSNDPIN_CFG
+	hex "MSND Pinnacle config port 250,260,270"
+	depends on MSNDPIN_NONPNP
+	default "250"
+	help
+	  This is the port which the Pinnacle and Fiji uses to configure the
+	  card's resources when not in PnP mode. If your card is in PnP mode,
+	  then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
+	  Mode".
+
+comment "Pinnacle-specific Device Configuration (0 disables)"
+	depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+
+config MSNDPIN_MPU_IO
+	hex "MSND Pinnacle MPU I/O (e.g. 330)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  Memory-mapped I/O base address for the Kurzweil daughterboard
+	  synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_MPU_IRQ
+	int "MSND Pinnacle MPU IRQ (e.g. 9)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  Iinterrupt request number for the Kurzweil daughterboard
+	  synthesizer on MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IO0
+	hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
+	  Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IO1
+	hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
+	  Pinnacle and Fiji sound cards.
+
+config MSNDPIN_IDE_IRQ
+	int "MSND Pinnacle IDE IRQ (e.g. 15)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  Interrupt request number for the IDE CD-ROM interface on the
+	  MultiSound Pinnacle and Fiji sound cards.
+
+config MSNDPIN_JOYSTICK_IO
+	hex "MSND Pinnacle joystick I/O (e.g. 200)"
+	depends on MSNDPIN_NONPNP
+	default "0"
+	help
+	  Memory-mapped I/O base address for the joystick port on MultiSound
+	  Pinnacle and Fiji sound cards.
+
+config MSND_FIFOSIZE
+	int "MSND buffer size (kB)"
+	depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
+	default "128"
+	help
+	  Configures the size of each audio buffer, in kilobytes, for
+	  recording and playing in the MultiSound drivers (both the Classic
+	  and Pinnacle). Larger values reduce the chance of data overruns at
+	  the expense of overall latency. If unsure, use the default.
+
+config SOUND_VIA82CXXX
+	tristate "VIA 82C686 Audio Codec"
+	depends on SOUND_PRIME!=n && PCI
+	help
+	  Say Y here to include support for the audio codec found on VIA
+	  82Cxxx-based chips. Typically these are built into a motherboard.
+
+	  DO NOT select Sound Blaster or Adlib with this driver, unless
+	  you have a Sound Blaster or Adlib card in addition to your VIA
+	  audio chip.
+
+config MIDI_VIA82CXXX
+	bool "VIA 82C686 MIDI"
+	depends on SOUND_VIA82CXXX
+	help
+	  Answer Y to use the MIDI interface of the Via686. You may need to
+	  enable this in the BIOS before it will work. This is for connection
+	  to external MIDI hardware, and is not required for software playback
+	  of MIDI files.
+
+config SOUND_OSS
+	tristate "OSS sound modules"
+	depends on SOUND_PRIME!=n && SOUND
+	help
+	  OSS is the Open Sound System suite of sound card drivers.  They make
+	  sound programming easier since they provide a common API.  Say Y or
+	  M here (the module will be called sound.o) if you haven't found a
+	  driver for your sound card above, then pick your driver from the
+	  list below.
+
+config SOUND_TRACEINIT
+	bool "Verbose initialisation"
+	depends on SOUND_OSS
+	help
+	  Verbose soundcard initialization -- affects the format of autoprobe
+	  and initialization messages at boot time.
+
+config SOUND_DMAP
+	bool "Persistent DMA buffers"
+	depends on SOUND_OSS
+	---help---
+	  Linux can often have problems allocating DMA buffers for ISA sound
+	  cards on machines with more than 16MB of RAM. This is because ISA
+	  DMA buffers must exist below the 16MB boundary and it is quite
+	  possible that a large enough free block in this region cannot be
+	  found after the machine has been running for a while. If you say Y
+	  here the DMA buffers (64Kb) will be allocated at boot time and kept
+	  until the shutdown. This option is only useful if you said Y to
+	  "OSS sound modules", above. If you said M to "OSS sound modules"
+	  then you can get the persistent DMA buffer functionality by passing
+	  the command-line argument "dmabuf=1" to the sound.o module.
+
+	  Say Y unless you have 16MB or more RAM or a PCI sound card.
+
+config SOUND_AD1816
+	tristate "AD1816(A) based cards (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && SOUND_OSS
+	help
+	  Say M here if you have a sound card based on the Analog Devices
+	  AD1816(A) chip.
+
+	  If you compile the driver into the kernel, you have to add
+	  "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_SGALAXY
+	tristate "Aztech Sound Galaxy (non-PnP) cards"
+	depends on SOUND_OSS
+	help
+	  This module initializes the older non Plug and Play sound galaxy
+	  cards from Aztech. It supports the Waverider Pro 32 - 3D and the
+	  Galaxy Washington 16.
+
+	  If you compile the driver into the kernel, you have to add
+	  "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
+	  line.
+
+config SOUND_ADLIB
+	tristate "Adlib Cards"
+	depends on SOUND_OSS
+	help
+	  Includes ASB 64 4D. Information on programming AdLib cards is
+	  available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
+
+config SOUND_ACI_MIXER
+	tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
+	depends on SOUND_OSS
+	---help---
+	  ACI (Audio Command Interface) is a protocol used to communicate with
+	  the microcontroller on some sound cards produced by miro and
+	  Cardinal Technologies.  The main function of the ACI is to control
+	  the mixer and to get a product identification.
+
+	  This VoxWare ACI driver currently supports the ACI functions on the
+	  miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
+	  also controls the radio tuner. This is supported in the video4linux
+	  miropcm20 driver (say M or Y here and go back to "Multimedia
+	  devices" -> "Radio Adapters").
+
+	  This driver is also available as a module and will be called aci.o.
+
+config SOUND_CS4232
+	tristate "Crystal CS4232 based (PnP) cards"
+	depends on SOUND_OSS
+	help
+	  Say Y here if you have a card based on the Crystal CS4232 chip set,
+	  which uses its own Plug and Play protocol.
+
+	  If you compile the driver into the kernel, you have to add
+	  "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+	  command line.
+
+	  See <file:Documentation/sound/CS4232> for more information on
+	  configuring this card.
+
+config SOUND_SSCAPE
+	tristate "Ensoniq SoundScape support"
+	depends on SOUND_OSS
+	help
+	  Answer Y if you have a sound card based on the Ensoniq SoundScape
+	  chipset. Such cards are being manufactured at least by Ensoniq, Spea
+	  and Reveal (Reveal makes also other cards).
+
+	  If you compile the driver into the kernel, you have to add
+	  "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
+	  line.
+
+config SOUND_GUS
+	tristate "Gravis Ultrasound support"
+	depends on SOUND_OSS
+	help
+	  Say Y here for any type of Gravis Ultrasound card, including the GUS
+	  or GUS MAX.  See also <file:Documentation/sound/ultrasound> for more
+	  information on configuring this card with modules.
+
+	  If you compile the driver into the kernel, you have to add
+	  "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_GUS16
+	bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
+	depends on SOUND_GUS
+	help
+	  Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
+	  sampling at 16-bit width.
+
+config SOUND_GUSMAX
+	bool "GUS MAX support"
+	depends on SOUND_GUS
+	help
+	  Support for Gravis Ulstrasound MAX.
+
+config SOUND_VMIDI
+	tristate "Loopback MIDI device support"
+	depends on SOUND_OSS
+	help
+	  Support for MIDI loopback on port 1 or 2.
+
+config SOUND_TRIX
+	tristate "MediaTrix AudioTrix Pro support"
+	depends on SOUND_OSS
+	help
+	  Answer Y if you have the AudioTriX Pro sound card manufactured
+	  by MediaTrix.
+
+config TRIX_HAVE_BOOT
+	bool "Have TRXPRO.HEX firmware file"
+	depends on SOUND_TRIX=y
+	help
+	  The MediaTrix AudioTrix Pro has an on-board microcontroller which
+	  needs to be initialized by downloading the code from the file
+	  TRXPRO.HEX in the DOS driver directory. If you don't have the
+	  TRXPRO.HEX file handy you may skip this step. However, the SB and
+	  MPU-401 modes of AudioTrix Pro will not work without this file!
+
+config TRIX_BOOT_FILE
+	string "Full pathname of TRXPRO.HEX firmware file"
+	depends on TRIX_HAVE_BOOT
+	default "/etc/sound/trxpro.hex"
+	help
+	  Enter the full pathname of your TRXPRO.HEX file, starting from /.
+
+config SOUND_MSS
+	tristate "Microsoft Sound System support"
+	depends on SOUND_OSS
+	---help---
+	  Again think carefully before answering Y to this question.  It's
+	  safe to answer Y if you have the original Windows Sound System card
+	  made by Microsoft or Aztech SG 16 Pro (or NX16 Pro).  Also you may
+	  say Y in case your card is NOT among these:
+
+	  ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
+	  Ensoniq SoundScape (and compatibles made by Reveal and Spea),
+	  Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
+	  Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
+	  Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
+	  82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
+	  Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
+	  SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
+	  Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
+	  Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
+	  Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
+	  notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
+	  synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
+
+	  For cards having native support in VoxWare, consult the card
+	  specific instructions in <file:Documentation/sound/README.OSS>.
+	  Some drivers have their own MSS support and saying Y to this option
+	  will cause a conflict.
+
+	  If you compile the driver into the kernel, you have to add
+	  "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
+	  line.
+
+config SOUND_MPU401
+	tristate "MPU-401 support (NOT for SB16)"
+	depends on SOUND_OSS
+	---help---
+	  Be careful with this question.  The MPU401 interface is supported by
+	  all sound cards.  However, some natively supported cards have their
+	  own driver for MPU401.  Enabling this MPU401 option with these cards
+	  will cause a conflict.  Also, enabling MPU401 on a system that
+	  doesn't really have a MPU401 could cause some trouble.  If your card
+	  was in the list of supported cards, look at the card specific
+	  instructions in the <file:Documentation/sound/README.OSS> file.  It
+	  is safe to answer Y if you have a true MPU401 MIDI interface card.
+
+	  If you compile the driver into the kernel, you have to add
+	  "mpu401=<io>,<irq>" to the kernel command line.
+
+config SOUND_NM256
+	tristate "NM256AV/NM256ZX audio support"
+	depends on SOUND_OSS
+	help
+	  Say M here to include audio support for the NeoMagic 256AV/256ZX
+	  chipsets. These are the audio chipsets found in the Sony
+	  Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
+	  laptops. It includes support for an AC97-compatible mixer and an
+	  apparently proprietary sound engine.
+
+	  See <file:Documentation/sound/NM256> for further information.
+
+config SOUND_MAD16
+	tristate "OPTi MAD16 and/or Mozart based cards"
+	depends on SOUND_OSS && SOUND_GAMEPORT
+	---help---
+	  Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
+	  82C928 or 82C929 or 82C931) audio interface chip. These chips are
+	  quite common so it's possible that many no-name cards have one of
+	  them. In addition the MAD16 chip is used in some cards made by known
+	  manufacturers such as Turtle Beach (Tropez), Reveal (some models)
+	  and Diamond (latest ones). Note however that the Tropez sound cards
+	  have their own driver; if you have one of those, say N here and Y or
+	  M to "Full support for Turtle Beach WaveFront", below.
+
+	  If you compile the driver into the kernel, you have to add
+	  "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
+	  kernel command line.
+
+	  See also <file:Documentation/sound/Opti> and
+	  <file:Documentation/sound/MAD16> for more information on setting
+	  these cards up as modules.
+
+config MAD16_OLDCARD
+	bool "Support MIDI in older MAD16 based cards (requires SB)"
+	depends on SOUND_MAD16
+	help
+	  Answer Y (or M) if you have an older card based on the C928 or
+	  Mozart chipset and you want to have MIDI support. If you enable this
+	  option you also need to enable support for Sound Blaster.
+
+config SOUND_PAS
+	tristate "ProAudioSpectrum 16 support"
+	depends on SOUND_OSS
+	---help---
+	  Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
+	  16 or Logitech SoundMan 16 sound card. Answer N if you have some
+	  other card made by Media Vision or Logitech since those are not
+	  PAS16 compatible. Please read <file:Documentation/sound/PAS16>.
+	  It is not necessary to add Sound Blaster support separately; it
+	  is included in PAS support.
+
+	  If you compile the driver into the kernel, you have to add
+	  "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
+	  to the kernel command line.
+
+config PAS_JOYSTICK
+	bool "Enable PAS16 joystick port"
+	depends on SOUND_PAS=y
+	help
+	  Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
+	  port.
+
+config SOUND_PSS
+	tristate "PSS (AD1848, ADSP-2115, ESC614) support"
+	depends on SOUND_OSS
+	help
+	  Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
+	  ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
+	  ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
+	  how to compile it into the kernel or as a module see the file
+	  <file:Documentation/sound/PSS>.
+
+	  If you compile the driver into the kernel, you have to add
+	  "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
+	  command line.
+
+config PSS_MIXER
+	bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
+	depends on SOUND_PSS
+	help
+	  Answer Y for Beethoven ADSP-16. You may try to say Y also for other
+	  cards if they have master volume, bass, treble, and you can't
+	  control it under Linux. If you answer N for Beethoven ADSP-16, you
+	  can't control master volume, bass, treble and synth volume.
+
+	  If you said M to "PSS support" above, you may enable or disable this
+	  PSS mixer with the module parameter pss_mixer. For more information
+	  see the file <file:Documentation/sound/PSS>.
+
+config PSS_HAVE_BOOT
+	bool "Have DSPxxx.LD firmware file"
+	depends on SOUND_PSS
+	help
+	  If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
+	  to include this file. Without this file the synth device (OPL) may
+	  not work.
+
+config PSS_BOOT_FILE
+	string "Full pathname of DSPxxx.LD firmware file"
+	depends on PSS_HAVE_BOOT
+	default "/etc/sound/dsp001.ld"
+	help
+	  Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
+	  starting from /.
+
+config SOUND_SB
+	tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
+	depends on SOUND_OSS
+	---help---
+	  Answer Y if you have an original Sound Blaster card made by Creative
+	  Labs or a 100% hardware compatible clone (like the Thunderboard or
+	  SM Games). For an unknown card you may answer Y if the card claims
+	  to be Sound Blaster-compatible.
+
+	  Please read the file <file:Documentation/sound/Soundblaster>.
+
+	  You should also say Y here for cards based on the Avance Logic
+	  ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/ALS>) and
+	  for cards based on ESS chips (read
+	  <file:Documentation/sound/ESS1868> and
+	  <file:Documentation/sound/ESS>). If you have an SB AWE 32 or SB AWE
+	  64, say Y here and also to "AWE32 synth" below and read
+	  <file:Documentation/sound/INSTALL.awe>. If you have an IBM Mwave
+	  card, say Y here and read <file:Documentation/sound/mwave>.
+
+	  If you compile the driver into the kernel and don't want to use
+	  isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
+	  command line.
+
+	  You can say M here to compile this driver as a module; the module is
+	  called sb.o.
+
+config SOUND_AWE32_SYNTH
+	tristate "AWE32 synth"
+	depends on SOUND_OSS
+	help
+	  Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
+	  similar sound card. See <file:Documentation/sound/README.awe>,
+	  <file:Documentation/sound/AWE32> and the Soundblaster-AWE
+	  mini-HOWTO, available from <http://www.linuxdoc.org/docs.html#howto>
+	  for more info.
+
+config SOUND_WAVEFRONT
+	tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
+	depends on SOUND_OSS && m
+	help
+	  Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
+	  and read the files <file:Documentation/sound/Wavefront> and
+	  <file:Documentation/sound/Tropez+>.
+
+config SOUND_MAUI
+	tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
+	depends on SOUND_OSS
+	help
+	  Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
+	  sound card.
+
+	  If you compile the driver into the kernel, you have to add
+	  "maui=<io>,<irq>" to the kernel command line.
+
+config MAUI_HAVE_BOOT
+	bool "Have OSWF.MOT firmware file"
+	depends on SOUND_MAUI=y
+	help
+	  Turtle Beach Maui and Tropez sound cards have a microcontroller
+	  which needs to be initialized prior to use. OSWF.MOT is a file
+	  distributed with the card's DOS/Windows drivers. Answer Y if you
+	  have this file.
+
+config MAUI_BOOT_FILE
+	string "Full pathname of OSWF.MOT firmware file"
+	depends on MAUI_HAVE_BOOT
+	default "/etc/sound/oswf.mot"
+	help
+	  Enter the full pathname of your OSWF.MOT file, starting from /.
+
+config SOUND_YM3812
+	tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
+	depends on SOUND_OSS
+	---help---
+	  Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
+	  Answering Y is usually a safe and recommended choice, however some
+	  cards may have software (TSR) FM emulation. Enabling FM support with
+	  these cards may cause trouble (I don't currently know of any such
+	  cards, however). Please read the file
+	  <file:Documentation/sound/OPL3> if your card has an OPL3 chip.
+
+	  If you compile the driver into the kernel, you have to add
+	  "opl3=<io>" to the kernel command line.
+
+	  If unsure, say Y.
+
+config SOUND_OPL3SA1
+	tristate "Yamaha OPL3-SA1 audio controller"
+	depends on SOUND_OSS
+	help
+	  Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
+	  usually built into motherboards. Read
+	  <file:Documentation/sound/OPL3-SA> for details.
+
+	  If you compile the driver into the kernel, you have to add
+	  "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+	  command line.
+
+config SOUND_OPL3SA2
+	tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
+	depends on SOUND_OSS
+	help
+	  Say Y or M if you have a card based on one of these Yamaha sound
+	  chipsets or the "SAx", which is actually a SA3. Read
+	  <file:Documentation/sound/OPL3-SA2> for more information on
+	  configuring these cards.
+
+	  If you compile the driver into the kernel and do not also
+	  configure in the optional ISA PnP support, you will have to add
+	  "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
+	  command line.
+
+config SOUND_YMFPCI
+	tristate "Yamaha YMF7xx PCI audio (native mode)"
+	depends on SOUND_OSS && PCI
+	help
+	  Support for Yamaha cards including the YMF711, YMF715, YMF718,
+	  YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
+
+config SOUND_YMFPCI_LEGACY
+	bool "Yamaha PCI legacy ports support"
+	depends on SOUND_YMFPCI
+	help
+	  Support for YMF7xx PCI cards emulating an MP401.
+
+config SOUND_UART6850
+	tristate "6850 UART support"
+	depends on SOUND_OSS
+	help
+	  This option enables support for MIDI interfaces based on the 6850
+	  UART chip. This interface is rarely found on sound cards. It's safe
+	  to answer N to this question.
+
+	  If you compile the driver into the kernel, you have to add
+	  "uart6850=<io>,<irq>" to the kernel command line.
+
+config SOUND_AEDSP16
+	tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
+	depends on SOUND_OSS
+	---help---
+	  Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
+	  driver supports Audio Excel DSP 16 but not the III nor PnP versions
+	  of this card.
+
+	  The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
+	  a Microsoft Sound System card, so you should have said Y to either
+	  "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
+	  or "Microsoft Sound System support", above, and you need to answer
+	  the "MSS emulation" and "SBPro emulation" questions below
+	  accordingly. You should say Y to one and only one of these two
+	  questions.
+
+	  Read the <file:Documentation/sound/README.OSS> file and the head of
+	  <file:drivers/sound/aedsp16.c> as well as
+	  <file:Documentation/sound/AudioExcelDSP16> to get more information
+	  about this driver and its configuration.
+
+config SC6600
+	bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
+	depends on SOUND_AEDSP16
+	help
+	  The SC6600 is the new version of DSP mounted on the Audio Excel DSP
+	  16 cards. Find in the manual the FCC ID of your audio card and
+	  answer Y if you have an SC6600 DSP.
+
+config SC6600_JOY
+	bool "Activate SC-6600 Joystick Interface"
+	depends on SC6600
+	help
+	  Say Y here in order to use the joystick interface of the Audio Excel
+	  DSP 16 card.
+
+config SC6600_CDROM
+	int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
+	depends on SC6600
+	default "4"
+
+config SC6600_CDROMBASE
+	hex "SC-6600 CDROM Interface I/O Address"
+	depends on SC6600
+	default "0"
+	help
+	  Base I/O port address for the CD-ROM interface of the Audio Excel
+	  DSP 16 card.
+
+choice
+	prompt "Audio Excel DSP 16"
+	optional
+	depends on SOUND_AEDSP16
+
+config AEDSP16_MSS
+	bool "MSS emulation"
+	depends on SOUND_MSS
+	help
+	  Answer Y if you want your audio card to emulate Microsoft Sound
+	  System. You should then say Y to "Microsoft Sound System support"
+	  and say N to "Audio Excel DSP 16 (SBPro emulation)".
+
+config AEDSP16_SBPRO
+	bool "SBPro emulation"
+	depends on SOUND_SB
+	help
+	  Answer Y if you want your audio card to emulate Sound Blaster Pro.
+	  You should then say Y to "100% Sound Blaster compatibles
+	  (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
+	  emulation)".
+
+	  If you compile the driver into the kernel, you have to add
+	  "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
+	  command line.
+
+endchoice
+
+config AEDSP16_MPU401
+	bool "Audio Excel DSP 16 (MPU401 emulation)"
+	depends on SOUND_AEDSP16 && SOUND_MPU401
+	help
+	  Answer Y if you want your audio card to emulate the MPU-401 midi
+	  interface. You should then also say Y to "MPU-401 support".
+
+	  Note that the I/O base for MPU-401 support of aedsp16 is the same
+	  you have selected for "MPU-401 support". If you are using this
+	  driver as a module you have to specify the MPU I/O base address with
+	  the parameter 'mpu_base=0xNNN'.
+
+config SOUND_VIDC
+	tristate "VIDC 16-bit sound"
+	depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
+	help
+	  16-bit support for the VIDC onboard sound hardware found on Acorn
+	  machines.
+
+config SOUND_WAVEARTIST
+	tristate "Netwinder WaveArtist"
+	depends on ARM && SOUND_OSS && ARCH_NETWINDER
+	help
+	  Say Y here to include support for the Rockwell WaveArtist sound
+	  system.  This driver is mainly for the NetWinder.
+
+config SOUND_TVMIXER
+	tristate "TV card (bt848) mixer support"
+	depends on SOUND_PRIME!=n && SOUND && I2C
+	help
+	  Support for audio mixer facilities on the BT848 TV frame-grabber
+	  card.
+

sound/oss/dmasound/Kconfig

+# drivers/sound/dmasound/Config.in
+config DMASOUND_ATARI
+	tristate "Atari DMA sound support"
+	depends on ATARI && SOUND
+	help
+	  If you want to use the internal audio of your Atari in Linux, answer
+	  Y to this question. This will provide a Sun-like /dev/audio,
+	  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you
+	  want). If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+config DMASOUND_AWACS
+	tristate "PowerMac DMA sound support"
+	depends on ALL_PPC && SOUND
+	help
+	  If you want to use the internal audio of your PowerMac in Linux,
+	  answer Y to this question. This will provide a Sun-like /dev/audio,
+	  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you
+	  want). If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+config DMASOUND_PAULA
+	tristate "Amiga DMA sound support"
+	depends on (AMIGA || APUS) && SOUND
+	help
+	  If you want to use the internal audio of your Amiga in Linux, answer
+	  Y to this question. This will provide a Sun-like /dev/audio,
+	  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you
+	  want). If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+config DMASOUND_Q40
+	tristate "Q40 sound support"
+	depends on Q40 && SOUND
+	help
+	  If you want to use the internal audio of your Q40 in Linux, answer
+	  Y to this question. This will provide a Sun-like /dev/audio,
+	  compatible with the Linux/i386 sound system. Otherwise, say N.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you
+	  want). If you want to compile it as a module, say M here and read
+	  <file:Documentation/modules.txt>.
+
+config DMASOUND
+	tristate
+	depends on SOUND!=n
+	default m if DMASOUND_ATARI!=y && DMASOUND_AWACS!=y && DMASOUND_PAULA!=y && DMASOUND_Q40!=y && (DMASOUND_ATARI=m || DMASOUND_AWACS=m || DMASOUND_PAULA=m || DMASOUND_Q40=m)
+	default y if DMASOUND_ATARI=y || DMASOUND_AWACS=y || DMASOUND_PAULA=y || DMASOUND_Q40=y
+	help
+	  Support built-in audio chips accessible by DMA on various machines
+	  that have them.  Note that this symbol does not affect the kernel
+	  directly; rather, it controls whether configuration questions
+	  enabling DMA sound drivers for various specific machine
+	  architectures will be used.
+

sound/pci/Kconfig

+# ALSA PCI drivers
+
+menu "PCI devices"
+	depends on SND!=n && PCI
+
+config SND_ALI5451
+	tristate "ALi PCI Audio M5451"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ALI PCI Audio M5451 sound core.
+
+config SND_CS46XX
+	tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
+	depends on SND && SOUND_GAMEPORT
+	help
+	  Say 'Y' or 'M' to include support for Cirrus Logic CS4610 / CS4612 /
+	  CS4614 / CS4615 / CS4622 / CS4624 / CS4630 / CS4280 chips.
+
+config SND_CS46XX_NEW_DSP
+	bool "Cirrus Logic (Sound Fusion) New DSP support (EXPERIMENTAL)"
+	depends on SND_CS46XX && EXPERIMENTAL
+	help
+	  Say 'Y' to use a new DSP image for SPDIF and dual codecs.
+
+config SND_CS4281
+	tristate "Cirrus Logic (Sound Fusion) CS4281"
+	depends on SND && SOUND_GAMEPORT
+	help
+	  Say 'Y' or 'M' to include support for Cirrus Logic CS4281.
+
+config SND_EMU10K1
+	tristate "EMU10K1 (SB Live! & Audigy, E-mu APS)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Sound Blaster PCI 512, Live!,
+	  Audigy and E-mu APS (partially supported).
+
+config SND_KORG1212
+	tristate "Korg 1212 IO"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Korg 1212IO.
+
+config SND_NM256
+	tristate "NeoMagic NM256AV/ZX"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for NeoMagic NM256AV/ZX chips.
+
+config SND_RME32
+	tristate "RME Digi32, 32/8, 32 PRO"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for RME Digi32, Digi32/8 and
+	  Digi32 PRO audio devices.
+
+config SND_RME96
+	tristate "RME Digi96, 96/8, 96/8 PRO"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for RME Digi96, Digi96/8 and
+	  Digi96/8 PRO/PAD/PST.
+
+config SND_RME9652
+	tristate "RME Digi9652 (Hammerfall)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for RME Hammerfall (RME Digi9652 /
+	  Digi9636) soundcards.
+
+config SND_HDSP
+	tristate "RME Hammerfall DSP Audio"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for RME Hammerfall DSP Audio
+	  soundcards.
+
+config SND_TRIDENT
+	tristate "Trident 4D-Wave DX/NX; SiS 7018"
+	depends on SND && SOUND_GAMEPORT
+	help
+	  Say 'Y' or 'M' to include support for Trident 4D-Wave DX/NX and
+	  SiS 7018 soundcards.
+
+config SND_YMFPCI
+	tristate "Yamaha YMF724/740/744/754"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Yamaha PCI audio chips - 
+	  YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
+
+config SND_ALS4000
+	tristate "Avance Logic ALS4000"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Avance Logic ALS4000.
+
+config SND_CMIPCI
+	tristate "C-Media 8738, 8338"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for C-Media CMI8338 and 8738 PCI
+	  soundcards.
+
+config SND_ENS1370
+	tristate "(Creative) Ensoniq AudioPCI 1370"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Ensoniq AudioPCI ES1370.
+
+config SND_ENS1371
+	tristate "(Creative) Ensoniq AudioPCI 1371/1373"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Ensoniq AudioPCI ES1371 and
+	  Sound Blaster PCI 64 or 128 soundcards.
+
+config SND_ES1938
+	tristate "ESS ES1938/1946 (Solo-1)"
+	depends on SND && SOUND_GAMEPORT
+	help
+	  Say 'Y' or 'M' to include support for ESS Solo-1 (ES1938, ES1946)
+	  soundcard.
+
+config SND_ES1968
+	tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ESS Maestro 1/2/2E.
+
+config SND_MAESTRO3
+	tristate "ESS Allegro/Maestro3"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ESS Maestro 3 (Allegro) soundcard.
+
+config SND_FM801
+	tristate "ForteMedia FM801"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ForteMedia FM801 based soundcards.
+
+config SND_ICE1712
+	tristate "ICEnsemble ICE1712 (Envy24)"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for ICE1712 (Envy24) based soundcards.
+	  Currently supported hardware is: MidiMan M Audio - Delta 1010(LT), Dio 2496,
+	  Delta 66/44, Audiophile 24/96; Hoontech SoundTrack DSP 24 (Value);
+	  TerraTec - EWX 24/96, EWS 88MT, EWS 88D, DMX 6Fire.
+
+config SND_INTEL8X0
+	tristate "Intel i8x0/MX440, SiS 7012; Ali 5455; NForce Audio; AMD768/8111"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for Intel8x0 based soundcards,
+	  SiS 7012, AMD768/8111, NVidia NForce and ALi 5455 chips.
+
+config SND_SONICVIBES
+	tristate "S3 SonicVibes"
+	depends on SND && SOUND_GAMEPORT
+	help
+	  Say 'Y' or 'M' to include support for S3 SonicVibes based soundcards.
+
+config SND_VIA82XX
+	tristate "VIA 82C686A/B, 8233 South Bridge"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for VIA VT82C686A/B, VT8233 South Bridge.
+
+endmenu
+

sound/ppc/Kconfig

+# ALSA PowerMac drivers
+
+menu "ALSA PowerMac devices"
+	depends on SND!=n && PPC
+
+config SND_POWERMAC
+	tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)"
+	depends on SND
+
+endmenu
+

sound/sparc/Kconfig

+# ALSA Sparc drivers
+
+menu "ALSA Sparc devices"
+	depends on SND!=n && (SPARC32 || SPARC64)
+
+config SND_SUN_AMD7930
+	tristate "Sun AMD7930"
+	depends on SBUS && SND
+
+#  dep_tristate 'Sun DBRI' CONFIG_SND_SUN_DBRI $CONFIG_SND
+config SND_SUN_CS4231
+	tristate "Sun CS4231"
+	depends on SND
+
+endmenu
+

sound/usb/Kconfig

+# ALSA USB drivers
+
+menu "ALSA USB devices"
+	depends on SND!=n && USB!=n
+
+config SND_USB_AUDIO
+	tristate "USB Audio/MIDI driver"
+	depends on SND
+	help
+	  Say 'Y' or 'M' to include support for USB audio and USB MIDI devices.
+
+endmenu
+