Commit 8340e915 authored by Dong Aisheng's avatar Dong Aisheng Committed by Linus Walleij

dt-bindings: gpio-vf610: add imx7ulp support

The Rapid General-Purpose Input and Output with 2 Ports (RGPIO2P)
on MX7ULP is similar to GPIO on Vibrid, except it has an extra
Port Data Direction Register (PDDR) used to configure the individual
port pins for input or output.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 77a4d757
...@@ -5,7 +5,9 @@ functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of ...@@ -5,7 +5,9 @@ functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
each, and each PORT module has its own interrupt. each, and each PORT module has its own interrupt.
Required properties for GPIO node: Required properties for GPIO node:
- compatible : Should be "fsl,<soc>-gpio", currently "fsl,vf610-gpio" - compatible : Should be "fsl,<soc>-gpio", below is supported list:
"fsl,vf610-gpio"
"fsl,imx7ulp-gpio"
- reg : The first reg tuple represents the PORT module, the second tuple - reg : The first reg tuple represents the PORT module, the second tuple
the GPIO module. the GPIO module.
- interrupts : Should be the port interrupt shared by all 32 pins. - interrupts : Should be the port interrupt shared by all 32 pins.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment