Commit 83508093 authored by Dmitry Eremin-Solenikov's avatar Dmitry Eremin-Solenikov Committed by Russell King

ARM: 8278/1: sa1100: split irq handling for low GPIOs

Low GPIO pins use an interrupt in SC interrupts space. However it's
possible to handle them as if all the GPIO interrupts are instead tied
to single GPIO handler, which later decodes GEDR register and
chain-calls next IRQ handler. So split first 11 interrupts into system
part (IRQ_GPIO0_SC - IRQ_GPIO10_SC) which work exactly like the rest of
system controller interrupts and real GPIO interrupts
(IRQ_GPIO0..IRQ_GPIO10). A single handler sa1100_gpio_handler then
decodes and calls next handler.
Signed-off-by: default avatarDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 7a8ca0a0
...@@ -8,17 +8,17 @@ ...@@ -8,17 +8,17 @@
* 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
*/ */
#define IRQ_GPIO0 1 #define IRQ_GPIO0_SC 1
#define IRQ_GPIO1 2 #define IRQ_GPIO1_SC 2
#define IRQ_GPIO2 3 #define IRQ_GPIO2_SC 3
#define IRQ_GPIO3 4 #define IRQ_GPIO3_SC 4
#define IRQ_GPIO4 5 #define IRQ_GPIO4_SC 5
#define IRQ_GPIO5 6 #define IRQ_GPIO5_SC 6
#define IRQ_GPIO6 7 #define IRQ_GPIO6_SC 7
#define IRQ_GPIO7 8 #define IRQ_GPIO7_SC 8
#define IRQ_GPIO8 9 #define IRQ_GPIO8_SC 9
#define IRQ_GPIO9 10 #define IRQ_GPIO9_SC 10
#define IRQ_GPIO10 11 #define IRQ_GPIO10_SC 11
#define IRQ_GPIO11_27 12 #define IRQ_GPIO11_27 12
#define IRQ_LCD 13 /* LCD controller */ #define IRQ_LCD 13 /* LCD controller */
#define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */ #define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */
...@@ -41,32 +41,43 @@ ...@@ -41,32 +41,43 @@
#define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */ #define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */
#define IRQ_RTCAlrm 32 /* RTC Alarm */ #define IRQ_RTCAlrm 32 /* RTC Alarm */
#define IRQ_GPIO11 33 #define IRQ_GPIO0 33
#define IRQ_GPIO12 34 #define IRQ_GPIO1 34
#define IRQ_GPIO13 35 #define IRQ_GPIO2 35
#define IRQ_GPIO14 36 #define IRQ_GPIO3 36
#define IRQ_GPIO15 37 #define IRQ_GPIO4 37
#define IRQ_GPIO16 38 #define IRQ_GPIO5 38
#define IRQ_GPIO17 39 #define IRQ_GPIO6 39
#define IRQ_GPIO18 40 #define IRQ_GPIO7 40
#define IRQ_GPIO19 41 #define IRQ_GPIO8 41
#define IRQ_GPIO20 42 #define IRQ_GPIO9 42
#define IRQ_GPIO21 43 #define IRQ_GPIO10 43
#define IRQ_GPIO22 44 #define IRQ_GPIO11 44
#define IRQ_GPIO23 45 #define IRQ_GPIO12 45
#define IRQ_GPIO24 46 #define IRQ_GPIO13 46
#define IRQ_GPIO25 47 #define IRQ_GPIO14 47
#define IRQ_GPIO26 48 #define IRQ_GPIO15 48
#define IRQ_GPIO27 49 #define IRQ_GPIO16 49
#define IRQ_GPIO17 50
#define IRQ_GPIO18 51
#define IRQ_GPIO19 52
#define IRQ_GPIO20 53
#define IRQ_GPIO21 54
#define IRQ_GPIO22 55
#define IRQ_GPIO23 56
#define IRQ_GPIO24 57
#define IRQ_GPIO25 58
#define IRQ_GPIO26 59
#define IRQ_GPIO27 60
/* /*
* The next 16 interrupts are for board specific purposes. Since * The next 16 interrupts are for board specific purposes. Since
* the kernel can only run on one machine at a time, we can re-use * the kernel can only run on one machine at a time, we can re-use
* these. If you need more, increase IRQ_BOARD_END, but keep it * these. If you need more, increase IRQ_BOARD_END, but keep it
* within sensible limits. IRQs 49 to 64 are available. * within sensible limits. IRQs 61 to 76 are available.
*/ */
#define IRQ_BOARD_START 50 #define IRQ_BOARD_START 61
#define IRQ_BOARD_END 66 #define IRQ_BOARD_END 77
/* /*
* Figure out the MAX IRQ number. * Figure out the MAX IRQ number.
......
...@@ -87,7 +87,7 @@ static struct irq_domain *sa1100_normal_irqdomain; ...@@ -87,7 +87,7 @@ static struct irq_domain *sa1100_normal_irqdomain;
*/ */
static int GPIO_IRQ_rising_edge; static int GPIO_IRQ_rising_edge;
static int GPIO_IRQ_falling_edge; static int GPIO_IRQ_falling_edge;
static int GPIO_IRQ_mask = (1 << 11) - 1; static int GPIO_IRQ_mask;
static int sa1100_gpio_type(struct irq_data *d, unsigned int type) static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
{ {
...@@ -124,6 +124,26 @@ static void sa1100_gpio_ack(struct irq_data *d) ...@@ -124,6 +124,26 @@ static void sa1100_gpio_ack(struct irq_data *d)
GEDR = BIT(d->hwirq); GEDR = BIT(d->hwirq);
} }
static void sa1100_gpio_mask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask &= ~mask;
GRER &= ~mask;
GFER &= ~mask;
}
static void sa1100_gpio_unmask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask |= mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
}
static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
{ {
if (on) if (on)
...@@ -139,8 +159,8 @@ static int sa1100_gpio_wake(struct irq_data *d, unsigned int on) ...@@ -139,8 +159,8 @@ static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
static struct irq_chip sa1100_low_gpio_chip = { static struct irq_chip sa1100_low_gpio_chip = {
.name = "GPIO-l", .name = "GPIO-l",
.irq_ack = sa1100_gpio_ack, .irq_ack = sa1100_gpio_ack,
.irq_mask = sa1100_mask_irq, .irq_mask = sa1100_gpio_mask,
.irq_unmask = sa1100_unmask_irq, .irq_unmask = sa1100_gpio_unmask,
.irq_set_type = sa1100_gpio_type, .irq_set_type = sa1100_gpio_type,
.irq_set_wake = sa1100_gpio_wake, .irq_set_wake = sa1100_gpio_wake,
}; };
...@@ -163,16 +183,16 @@ static struct irq_domain_ops sa1100_low_gpio_irqdomain_ops = { ...@@ -163,16 +183,16 @@ static struct irq_domain_ops sa1100_low_gpio_irqdomain_ops = {
static struct irq_domain *sa1100_low_gpio_irqdomain; static struct irq_domain *sa1100_low_gpio_irqdomain;
/* /*
* IRQ11 (GPIO11 through 27) handler. We enter here with the * IRQ 0-11 (GPIO) handler. We enter here with the
* irq_controller_lock held, and IRQs disabled. Decode the IRQ * irq_controller_lock held, and IRQs disabled. Decode the IRQ
* and call the handler. * and call the handler.
*/ */
static void static void
sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) sa1100_gpio_handler(unsigned int irq, struct irq_desc *desc)
{ {
unsigned int mask; unsigned int mask;
mask = GEDR & 0xfffff800; mask = GEDR;
do { do {
/* /*
* clear down all currently active IRQ sources. * clear down all currently active IRQ sources.
...@@ -180,8 +200,7 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) ...@@ -180,8 +200,7 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
*/ */
GEDR = mask; GEDR = mask;
irq = IRQ_GPIO11; irq = IRQ_GPIO0;
mask >>= 11;
do { do {
if (mask & 1) if (mask & 1)
generic_handle_irq(irq); generic_handle_irq(irq);
...@@ -189,7 +208,7 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) ...@@ -189,7 +208,7 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
irq++; irq++;
} while (mask); } while (mask);
mask = GEDR & 0xfffff800; mask = GEDR;
} while (mask); } while (mask);
} }
...@@ -198,31 +217,11 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc) ...@@ -198,31 +217,11 @@ sa1100_high_gpio_handler(unsigned int irq, struct irq_desc *desc)
* In addition, the IRQs are all collected up into one bit in the * In addition, the IRQs are all collected up into one bit in the
* interrupt controller registers. * interrupt controller registers.
*/ */
static void sa1100_high_gpio_mask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask &= ~mask;
GRER &= ~mask;
GFER &= ~mask;
}
static void sa1100_high_gpio_unmask(struct irq_data *d)
{
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask |= mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
}
static struct irq_chip sa1100_high_gpio_chip = { static struct irq_chip sa1100_high_gpio_chip = {
.name = "GPIO-h", .name = "GPIO-h",
.irq_ack = sa1100_gpio_ack, .irq_ack = sa1100_gpio_ack,
.irq_mask = sa1100_high_gpio_mask, .irq_mask = sa1100_gpio_mask,
.irq_unmask = sa1100_high_gpio_unmask, .irq_unmask = sa1100_gpio_unmask,
.irq_set_type = sa1100_gpio_type, .irq_set_type = sa1100_gpio_type,
.irq_set_wake = sa1100_gpio_wake, .irq_set_wake = sa1100_gpio_wake,
}; };
...@@ -325,7 +324,7 @@ sa1100_handle_irq(struct pt_regs *regs) ...@@ -325,7 +324,7 @@ sa1100_handle_irq(struct pt_regs *regs)
if (mask == 0) if (mask == 0)
break; break;
handle_IRQ(ffs(mask) - 1 + IRQ_GPIO0, regs); handle_IRQ(ffs(mask) - 1 + IRQ_GPIO0_SC, regs);
} while (1); } while (1);
} }
...@@ -350,22 +349,36 @@ void __init sa1100_init_irq(void) ...@@ -350,22 +349,36 @@ void __init sa1100_init_irq(void)
*/ */
ICCR = 1; ICCR = 1;
sa1100_normal_irqdomain = irq_domain_add_legacy(NULL,
32, IRQ_GPIO0_SC, 0,
&sa1100_normal_irqdomain_ops, NULL);
sa1100_low_gpio_irqdomain = irq_domain_add_legacy(NULL, sa1100_low_gpio_irqdomain = irq_domain_add_legacy(NULL,
11, IRQ_GPIO0, 0, 11, IRQ_GPIO0, 0,
&sa1100_low_gpio_irqdomain_ops, NULL); &sa1100_low_gpio_irqdomain_ops, NULL);
sa1100_normal_irqdomain = irq_domain_add_legacy(NULL,
21, IRQ_GPIO11_27, 11,
&sa1100_normal_irqdomain_ops, NULL);
sa1100_high_gpio_irqdomain = irq_domain_add_legacy(NULL, sa1100_high_gpio_irqdomain = irq_domain_add_legacy(NULL,
17, IRQ_GPIO11, 11, 17, IRQ_GPIO11, 11,
&sa1100_high_gpio_irqdomain_ops, NULL); &sa1100_high_gpio_irqdomain_ops, NULL);
/*
* Install handlers for GPIO 0-10 edge detect interrupts
*/
irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
/* /*
* Install handler for GPIO 11-27 edge detect interrupts * Install handler for GPIO 11-27 edge detect interrupts
*/ */
irq_set_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler); irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
set_handle_irq(sa1100_handle_irq); set_handle_irq(sa1100_handle_irq);
......
...@@ -50,7 +50,7 @@ static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int ...@@ -50,7 +50,7 @@ static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int
static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset) static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset)
{ {
return offset < 11 ? (IRQ_GPIO0 + offset) : (IRQ_GPIO11 - 11 + offset); return IRQ_GPIO0 + offset;
} }
static struct gpio_chip sa1100_gpio_chip = { static struct gpio_chip sa1100_gpio_chip = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment