Commit 837f27a2 authored by Alexandre Belloni's avatar Alexandre Belloni

ARM: multi_v5_defconfig: enable Atmel platforms

Enable Atmel ARMv5 platforms in multi_v5
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 1a695a90
......@@ -13,6 +13,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91SAM9=y
CONFIG_ARCH_ASPEED=y
CONFIG_MACH_ASPEED_G4=y
CONFIG_ARCH_MXC=y
......@@ -89,8 +91,12 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_ORION=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
......@@ -102,15 +108,22 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_MACB=y
CONFIG_DM9000=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_MWL8K=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_QT1070=m
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
......@@ -120,16 +133,21 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_SERIAL_ATMEL_TTYAT=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AT91=y
CONFIG_I2C_IMX=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_IMX=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
......@@ -143,18 +161,36 @@ CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM85=y
CONFIG_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_ATMEL_HLCDC=y
# CONFIG_ABX500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_ATMEL_ISI=m
CONFIG_SOC_CAMERA_OV2640=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB=y
CONFIG_FB_IMX=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_ATMEL_LCDC=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=m
CONFIG_SND_ATMEL_SOC_WM8904=m
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_SOC_ALC5623=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
......@@ -173,6 +209,7 @@ CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DATAFAB=y
......@@ -182,8 +219,12 @@ CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_GADGET=y
CONFIG_USB_AT91=m
CONFIG_USB_ATMEL_USBA=m
CONFIG_MMC=y
CONFIG_SDIO_UART=y
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_MVSDIO=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
......@@ -196,11 +237,21 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_RTC_DRV_AT91SAM9=m
CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
CONFIG_MV_XOR=y
CONFIG_STAGING=y
CONFIG_FB_XGI=y
CONFIG_IIO=m
CONFIG_AT91_ADC=m
CONFIG_PWM=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
CONFIG_PWM_ATMEL_TCB=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_ISO9660_FS=m
......@@ -210,6 +261,7 @@ CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment