ARM: dts: N9/N950: Add support for accelerometer

Signed-off-by: Filip Matijević <filip.matijevic.pz@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap3-n9.dts

@@ -57,3 +57,17 @@ csi2a_ep: endpoint {
 &modem {
 	compatible = "nokia,n9-modem";
 };
+
+&lis302 {
+	st,axis-x = <1>;    /* LIS3_DEV_X */
+	st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-46)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <46>;
+	st,max-limit-z = <46>;
+};

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -61,6 +61,13 @@ heartbeat {
 };
 
 &omap3_pmx_core {
+	accelerator_pins: pinmux_accelerator_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4)	/* mcspi2_somi.gpio_180 -> LIS302 INT1 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4)	/* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
+		>;
+	};
+
 	debug_leds: pinmux_debug_led_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4)       /* dss_data22.gpio_92 */
@@ -246,6 +253,53 @@ &i2c2 {
 
 &i2c3 {
 	clock-frequency = <400000>;
+
+	lis302: lis302@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+
+		Vdd-supply = <&vaux1>;
+		Vdd_IO-supply = <&vio>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accelerator_pins>;
+
+                interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+
+		/* click flags */
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+
+		/* Limits are 0.5g * value */
+		st,click-threshold-x = <8>;
+		st,click-threshold-y = <8>;
+		st,click-threshold-z = <10>;
+
+		/* Click must be longer than time limit */
+		st,click-time-limit = <9>;
+
+		/* Kind of debounce filter */
+		st,click-latency = <50>;
+
+		st,wakeup-x-hi;
+		st,wakeup-y-hi;
+		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
+
+		st,wakeup2-z-hi;
+		st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
+
+		st,highpass-cutoff-hz = <2>;
+
+		/* Interrupt line 1 for thresholds */
+		st,irq1-ff-wu-1;
+		st,irq1-ff-wu-2;
+		/* Interrupt line 2 for click detection */
+		st,irq2-click;
+
+		st,wu-duration-1 = <8>;
+		st,wu-duration-2 = <8>;
+	};
 };
 
 &mmc1 {

arch/arm/boot/dts/omap3-n950.dts

@@ -171,3 +171,17 @@ MATRIX_KEY(0x06, 0x07, KEY_F)
 			 MATRIX_KEY(0x07, 0x07, KEY_R)
 			 >;
 };
+
+&lis302 {
+	st,axis-x = <(-2)>; /* LIS3_INV_DEV_Y */
+	st,axis-y = <(-1)>; /* LIS3_INV_DEV_X */
+	st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
+
+	st,min-limit-x = <(-32)>;
+	st,min-limit-y = <3>;
+	st,min-limit-z = <3>;
+
+	st,max-limit-x = <(-3)>;
+	st,max-limit-y = <32>;
+	st,max-limit-z = <32>;
+};