Commit 846f5c62 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[BNX2]: Fix default WoL setting.

Change the default WoL setting to match the NVRAM's setting.  It
always defaulted to WoL disabled before and caused a lot of confusion
for users.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 489310a4
......@@ -6569,8 +6569,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (i != 2)
bp->fw_version[j++] = '.';
}
if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) &
BNX2_PORT_FEATURE_ASF_ENABLED) {
reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE);
if (reg & BNX2_PORT_FEATURE_WOL_ENABLED)
bp->wol = 1;
if (reg & BNX2_PORT_FEATURE_ASF_ENABLED) {
bp->flags |= ASF_ENABLE_FLAG;
for (i = 0; i < 30; i++) {
......@@ -6640,11 +6643,14 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->phy_port = PORT_TP;
if (bp->phy_flags & PHY_SERDES_FLAG) {
bp->phy_port = PORT_FIBRE;
reg = REG_RD_IND(bp, bp->shmem_base +
BNX2_SHARED_HW_CFG_CONFIG);
if (!(reg & BNX2_SHARED_HW_CFG_GIG_LINK_ON_VAUX)) {
bp->flags |= NO_WOL_FLAG;
bp->wol = 0;
}
if (CHIP_NUM(bp) != CHIP_NUM_5706) {
bp->phy_addr = 2;
reg = REG_RD_IND(bp, bp->shmem_base +
BNX2_SHARED_HW_CFG_CONFIG);
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
}
......@@ -6659,8 +6665,10 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B0) ||
(CHIP_ID(bp) == CHIP_ID_5708_B1))
(CHIP_ID(bp) == CHIP_ID_5708_B1)) {
bp->flags |= NO_WOL_FLAG;
bp->wol = 0;
}
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
bp->tx_quick_cons_trip_int =
......
......@@ -6908,6 +6908,7 @@ struct fw_info {
#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100
#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200
#define BNX2_SHARED_HW_CFG_GIG_LINK_ON_VAUX 0x8000
#define BNX2_SHARED_HW_CFG_CONFIG2 0x00000040
#define BNX2_SHARED_HW_CFG2_NVM_SIZE_MASK 0x00fff000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment