Commit 84fbd2b8 authored by Tony Lindgren's avatar Tony Lindgren

Merge branch 'for_3.8/dts_part2' of...

Merge branch 'for_3.8/dts_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.8/dt
parents 2580390c 5a2bc4c6
AM33XX MUSB GLUE
- compatible : Should be "ti,musb-am33xx"
- reg : offset and length of register sets, first usbss, then for musb instances
- interrupts : usbss, musb instance interrupts in order
- ti,hwmods : must be "usb_otg_hs"
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
......@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
represents PERIPHERAL.
- power : Should be "250". This signifies the controller can supply upto
500mA when operating in host mode.
Example:
usb@47400000 {
compatible = "ti,musb-am33xx";
reg = <0x47400000 0x1000 /* usbss */
0x47401000 0x800 /* musb instance 0 */
0x47401800 0x800>; /* musb instance 1 */
interrupts = <17 /* usbss */
18 /* musb instance 0 */
19>; /* musb instance 1 */
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
port0-mode = <3>;
port1-mode = <3>;
power = <250>;
ti,hwmods = "usb_otg_hs";
};
......@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap4-sdp.dtb \
omap5-evm.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-bone.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
......
......@@ -24,6 +24,20 @@ memory {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
0x58 0x17 /* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
0x5c 0x7 /* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
0x60 0x17 /* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
>;
};
};
ocp {
uart1: serial@44e09000 {
status = "okay";
......@@ -39,6 +53,36 @@ tps: tps@24 {
};
};
leds {
compatible = "gpio-leds";
led@2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio2 21 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio2 22 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "beaglebone:green:usr2";
gpios = <&gpio2 23 0>;
default-state = "off";
};
led@5 {
label = "beaglebone:green:usr3";
gpios = <&gpio2 24 0>;
default-state = "off";
};
};
};
/include/ "tps65217.dtsi"
......
......@@ -24,6 +24,28 @@ memory {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
0x58 0x7 /* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
0x64 0x27 /* gpmc_a9.gpio1_25, INPUT | MODE7 */
0x68 0x27 /* gpmc_a10.gpio1_26, INPUT | MODE7 */
0x6c 0x27 /* gpmc_a11.gpio1_27, INPUT | MODE7 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
0x150 0x27 /* spi0_sclk.gpio0_2, INPUT | MODE7 */
0x154 0x27 /* spi0_d0.gpio0_3, INPUT | MODE7 */
>;
};
};
ocp {
uart1: serial@44e09000 {
status = "okay";
......@@ -95,6 +117,47 @@ lis3_reg: fixedregulator@1 {
regulator-name = "lis3_reg";
regulator-boot-on;
};
matrix_keypad: matrix_keypad@0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio2 25 0 /* Bank1, pin25 */
&gpio2 26 0 /* Bank1, pin26 */
&gpio2 27 0>; /* Bank1, pin27 */
col-gpios = <&gpio2 21 0 /* Bank1, pin21 */
&gpio2 22 0>; /* Bank1, pin22 */
linux,keymap = <0x0000008b /* MENU */
0x0100009e /* BACK */
0x02000069 /* LEFT */
0x0001006a /* RIGHT */
0x0101001c /* ENTER */
0x0201006c>; /* DOWN */
};
gpio_keys: volume_keys@0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
switch@9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio1 2 1>;
gpio-key,wakeup;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio1 3 1>;
gpio-key,wakeup;
};
};
};
/include/ "tps65910.dtsi"
......
......@@ -30,6 +30,29 @@ memory {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
am33xx_pinmux: pinmux@44e10800 {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x10 0x7 /* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
0x14 0x7 /* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
0x18 0x7 /* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
0x1c 0x7 /* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
>;
};
gpio_keys_s0: gpio_keys_s0 {
pinctrl-single,pins = <
0x94 0x27 /* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
0x90 0x27 /* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
0x70 0x27 /* gpmc_wait0.gpio0_30, INPUT | MODE7 */
0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
>;
};
};
ocp {
uart1: serial@44e09000 {
status = "okay";
......@@ -86,6 +109,67 @@ lis3_reg: fixedregulator@1 {
regulator-name = "lis3_reg";
regulator-boot-on;
};
leds {
compatible = "gpio-leds";
led@1 {
label = "evmsk:green:usr0";
gpios = <&gpio2 4 0>;
default-state = "off";
};
led@2 {
label = "evmsk:green:usr1";
gpios = <&gpio2 5 0>;
default-state = "off";
};
led@3 {
label = "evmsk:green:mmc0";
gpios = <&gpio2 6 0>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
label = "evmsk:green:heartbeat";
gpios = <&gpio2 7 0>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
gpio_buttons: gpio_buttons@0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
switch@1 {
label = "button0";
linux,code = <0x100>;
gpios = <&gpio3 3 0>;
};
switch@2 {
label = "button1";
linux,code = <0x101>;
gpios = <&gpio3 2 0>;
};
switch@3 {
label = "button2";
linux,code = <0x102>;
gpios = <&gpio1 30 0>;
gpio-key,wakeup;
};
switch@4 {
label = "button3";
linux,code = <0x103>;
gpios = <&gpio3 5 0>;
};
};
};
/include/ "tps65910.dtsi"
......
......@@ -321,5 +321,22 @@ spi1: spi@481a0000 {
ti,hwmods = "spi1";
status = "disabled";
};
usb@47400000 {
compatible = "ti,musb-am33xx";
reg = <0x47400000 0x1000 /* usbss */
0x47401000 0x800 /* musb instance 0 */
0x47401800 0x800>; /* musb instance 1 */
interrupts = <17 /* usbss */
18 /* musb instance 0 */
19>; /* musb instance 1 */
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
port0-mode = <3>;
port1-mode = <3>;
power = <250>;
ti,hwmods = "usb_otg_hs";
};
};
};
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap4-panda.dts"
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
......@@ -22,3 +22,12 @@ &sound {
"AFML", "Line In",
"AFMR", "Line In";
};
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
......@@ -65,6 +65,8 @@ &omap4_pmx_core {
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
twl6040_pins: pinmux_twl6040_pins {
......@@ -92,6 +94,22 @@ mcbsp1_pins: pinmux_mcbsp1_pins {
0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
};
&i2c1 {
......
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "omap4-sdp.dts"
/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x100 /* hdmi_scl.hdmi_scl INPUT | MODE 0 */
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
......@@ -124,6 +124,8 @@ &mcpdm_pins
&dmic_pins
&mcbsp1_pins
&mcbsp2_pins
&dss_hdmi_pins
&tpd12s015_pins
>;
uart2_pins: pinmux_uart2_pins {
......@@ -194,6 +196,22 @@ mcbsp2_pins: pinmux_mcbsp2_pins {
0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
>;
};
dss_hdmi_pins: pinmux_dss_hdmi_pins {
pinctrl-single,pins = <
0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
>;
};
};
&i2c1 {
......
......@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap5.dtsi"
/include/ "samsung_k3pe0e000b.dtsi"
/ {
model = "TI OMAP5 EVM board";
......@@ -15,7 +16,7 @@ / {
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
reg = <0x80000000 0x80000000>; /* 2 GB */
};
vmmcsd_fixed: fixedregulator-mmcsd {
......@@ -140,3 +141,13 @@ &keypad {
&mcbsp3 {
status = "disabled";
};
&emif1 {
cs1-used;
device-handle = <&samsung_K3PE0E000B>;
};
&emif2 {
cs1-used;
device-handle = <&samsung_K3PE0E000B>;
};
......@@ -474,5 +474,27 @@ timer11: timer@48088000 {
ti,hwmods = "timer11";
ti,timer-pwm;
};
emif1: emif@0x4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4c000000 0x400>;
interrupts = <0 110 0x4>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
emif2: emif@0x4d000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif2";
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4d000000 0x400>;
interrupts = <0 111 0x4>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
};
};
/*
* Timings and Geometry for Samsung K3PE0E000B memory part
*/
/ {
samsung_K3PE0E000B: lpddr2 {
compatible = "Samsung,K3PE0E000B","jedec,lpddr2-s4";
density = <4096>;
io-width = <32>;
tRPab-min-tck = <3>;
tRCD-min-tck = <3>;
tWR-min-tck = <3>;
tRASmin-min-tck = <3>;
tRRD-min-tck = <2>;
tWTR-min-tck = <2>;
tXP-min-tck = <2>;
tRTP-min-tck = <2>;
tCKE-min-tck = <3>;
tCKESR-min-tck = <3>;
tFAW-min-tck = <8>;
timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
compatible = "jedec,lpddr2-timings";
min-freq = <10000000>;
max-freq = <533333333>;
tRPab = <21000>;
tRCD = <18000>;
tWR = <15000>;
tRAS-min = <42000>;
tRRD = <10000>;
tWTR = <7500>;
tXP = <7500>;
tRTP = <7500>;
tCKESR = <15000>;
tDQSCK-max = <5500>;
tFAW = <50000>;
tZQCS = <90000>;
tZQCL = <360000>;
tZQinit = <1000000>;
tRAS-max-ns = <70000>;
tDQSCK-max-derated = <6000>;
};
timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
compatible = "jedec,lpddr2-timings";
min-freq = <10000000>;
max-freq = <266666666>;
tRPab = <21000>;
tRCD = <18000>;
tWR = <15000>;
tRAS-min = <42000>;
tRRD = <10000>;
tWTR = <7500>;
tXP = <7500>;
tRTP = <7500>;
tCKESR = <15000>;
tDQSCK-max = <5500>;
tFAW = <50000>;
tZQCS = <90000>;
tZQCL = <360000>;
tZQinit = <1000000>;
tRAS-max-ns = <70000>;
tDQSCK-max-derated = <6000>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment