drm/amd/display: Update BW alloc after new DMUB logic

[WHY]
After introducing new DPIA NOTIFICATION we will need
to update the exiting BW allocation logic

[HOW]
Updated the BW alloc source and header files
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dc_link.h

@@ -158,11 +158,11 @@ struct dc_panel_config {
 struct dc_dpia_bw_alloc {
 	int sink_verified_bw;  // The Verified BW that sink can allocated and use that has been verified already
 	int sink_allocated_bw; // The Actual Allocated BW that sink currently allocated
-	int padding_bw;        // The Padding "Un-used" BW allocated by CM for padding reasons
 	int sink_max_bw;       // The Max BW that sink can require/support
 	int estimated_bw;      // The estimated available BW for this DPIA
 	int bw_granularity;    // BW Granularity
 	bool bw_alloc_enabled; // The BW Alloc Mode Support is turned ON for all 3:  DP-Tx & Dpia & CM
+	bool response_ready;   // Response ready from the CM side
 };
 
 /*

drivers/gpu/drm/amd/display/dc/link/link_dp_dpia_bw.h

@@ -26,13 +26,13 @@
 #ifndef DC_INC_LINK_DP_DPIA_BW_H_
 #define DC_INC_LINK_DP_DPIA_BW_H_
 
-// XXX: TODO: Re-add for Phase 2
-/* Number of Host Routers per motherboard is 2 and 2 DPIA per host router */
-#define MAX_HR_NUM 2
-
-struct dc_host_router_bw_alloc {
-	int max_bw[MAX_HR_NUM];             // The Max BW that each Host Router has available to be shared btw DPIAs
-	int total_estimated_bw[MAX_HR_NUM]; // The Total Verified and available BW that Host Router has
+/*
+ * Host Router BW type
+ */
+enum bw_type {
+	HOST_ROUTER_BW_ESTIMATED,
+	HOST_ROUTER_BW_ALLOCATED,
+	HOST_ROUTER_BW_INVALID,
 };
 
 /*
@@ -61,9 +61,40 @@ void set_usb4_req_bw_req(struct dc_link *link, int req_bw);
  * find out the result of allocating on CM and update structs accordingly
  *
  * @link: pointer to the dc_link struct instance
+ * @bw: Allocated or Estimated BW depending on the result
+ * @result: Response type
+ *
+ * return: none
+ */
+void get_usb4_req_bw_resp(struct dc_link *link, uint8_t bw, uint8_t result);
+
+/*
+ * Return the response_ready flag from dc_link struct
+ *
+ * @link: pointer to the dc_link struct instance
+ *
+ * return: response_ready flag from dc_link struct
+ */
+bool get_cm_response_ready_flag(struct dc_link *link);
+
+/*
+ * Get the Max Available BW or Max Estimated BW for each Host Router
+ *
+ * @link: pointer to the dc_link struct instance
+ * @type: ESTIMATD BW or MAX AVAILABLE BW
+ *
+ * return: response_ready flag from dc_link struct
+ */
+int get_host_router_total_bw(struct dc_link *link, uint8_t type);
+
+/*
+ * Cleanup function for when the dpia is unplugged to reset struct
+ * and perform any required clean up
+ *
+ * @link: pointer to the dc_link struct instance
  *
  * return: none
  */
-void get_usb4_req_bw_resp(struct dc_link *link);
+bool dpia_bw_alloc_unplug(struct dc_link *link);
 
 #endif /* DC_INC_LINK_DP_DPIA_BW_H_ */

drivers/gpu/drm/amd/display/dmub/src/dmub_srv_stat.c

@@ -98,20 +98,20 @@ enum dmub_status dmub_srv_stat_get_notification(struct dmub_srv *dmub,
 
 		if (cmd.dpia_notify.payload.header.type == DPIA_NOTIFY__BW_ALLOCATION) {
 
-			if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_request_failed) {
-				notify->result = DPIA_BW_REQ_FAILED;
-			} else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_request_succeeded) {
-				notify->result = DPIA_BW_REQ_SUCCESS;
+			notify->bw_alloc_reply.estimated_bw =
+					cmd.dpia_notify.payload.data.dpia_bw_alloc.estimated_bw;
 			notify->bw_alloc_reply.allocated_bw =
 					cmd.dpia_notify.payload.data.dpia_bw_alloc.allocated_bw;
-			} else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.est_bw_changed) {
+
+			if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_request_failed)
+				notify->result = DPIA_BW_REQ_FAILED;
+			else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_request_succeeded)
+				notify->result = DPIA_BW_REQ_SUCCESS;
+			else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.est_bw_changed)
 				notify->result = DPIA_EST_BW_CHANGED;
-				notify->bw_alloc_reply.estimated_bw =
-						cmd.dpia_notify.payload.data.dpia_bw_alloc.estimated_bw;
-			} else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_alloc_cap_changed) {
+			else if (cmd.dpia_notify.payload.data.dpia_bw_alloc.bits.bw_alloc_cap_changed)
 				notify->result = DPIA_BW_ALLOC_CAPS_CHANGED;
 		}
-		}
 		break;
 	default:
 		notify->type = DMUB_NOTIFICATION_NO_DATA;