staging: ste_rmi4: remove cross-dependent platform data

The ux500 machine was actually defining platform data for the
staging driver ste_rmi4, which is not OK. Let us instead define
some __weak platform data in the machine so that the staging
driver can override it at compile-time and we can thus have the
driver self-contained in staging.
Reported-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/arm/mach-ux500/board-mop500-u8500uib.c

@@ -12,34 +12,14 @@
 #include <linux/interrupt.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/input/matrix_keypad.h>
-#include <../drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h>
 
 #include <mach/gpio.h>
 #include <mach/irqs.h>
 
 #include "board-mop500.h"
 
-/*
- * Synaptics RMI4 touchscreen interface on the U8500 UIB
- */
-
-/*
- * Descriptor structure.
- * Describes the number of i2c devices on the bus that speak RMI.
- */
-static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = {
-	.irq_number     = NOMADIK_GPIO_TO_IRQ(84),
-	.irq_type       = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
-	.x_flip		= false,
-	.y_flip		= true,
-	.regulator_en   = false,
-};
-
-static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
-		.platform_data = &rmi4_i2c_dev_platformdata,
-	},
+/* Dummy data that can be overridden by staging driver */
+struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = {
 };
 
 /*

drivers/staging/ste_rmi4/Makefile

@@ -2,3 +2,4 @@
 # Makefile for the RMI4 touchscreen driver.
 #
 obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
+obj-$(CONFIG_MACH_U8500) += board-mop500-u8500uib-rmi4.o

drivers/staging/ste_rmi4/board-mop500-u8500uib-rmi4.c

+/*
+ * Some platform data for the RMI4 touchscreen that will override the __weak
+ * platform data in the Ux500 machine if this driver is activated.
+ */
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+#include "synaptics_i2c_rmi4.h"
+
+/*
+ * Synaptics RMI4 touchscreen interface on the U8500 UIB
+ */
+
+/*
+ * Descriptor structure.
+ * Describes the number of i2c devices on the bus that speak RMI.
+ */
+static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = {
+	.irq_number     = NOMADIK_GPIO_TO_IRQ(84),
+	.irq_type       = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
+	.x_flip		= false,
+	.y_flip		= true,
+};
+
+struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
+	{
+		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
+		.platform_data = &rmi4_i2c_dev_platformdata,
+	},
+};