Commit 8587b220 authored by Manu Gautam's avatar Manu Gautam Committed by Kishon Vijay Abraham I

dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY

Update compatible string and clock names for QMP version V3
USB PHY.
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarManu Gautam <mgautam@codeaurora.org>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 9c7761a3
...@@ -8,7 +8,8 @@ Required properties: ...@@ -8,7 +8,8 @@ Required properties:
- compatible: compatible list, contains: - compatible: compatible list, contains:
"qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
"qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
"qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
"qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
- reg: offset and length of register set for PHY's common serdes block. - reg: offset and length of register set for PHY's common serdes block.
...@@ -25,10 +26,13 @@ Required properties: ...@@ -25,10 +26,13 @@ Required properties:
- clock-names: "cfg_ahb" for phy config clock, - clock-names: "cfg_ahb" for phy config clock,
"aux" for phy aux clock, "aux" for phy aux clock,
"ref" for 19.2 MHz ref clk, "ref" for 19.2 MHz ref clk,
"com_aux" for phy common block aux clock,
For "qcom,msm8996-qmp-pcie-phy" must contain: For "qcom,msm8996-qmp-pcie-phy" must contain:
"aux", "cfg_ahb", "ref". "aux", "cfg_ahb", "ref".
For "qcom,msm8996-qmp-usb3-phy" must contain: For "qcom,msm8996-qmp-usb3-phy" must contain:
"aux", "cfg_ahb", "ref". "aux", "cfg_ahb", "ref".
For "qcom,qmp-v3-usb3-phy" must contain:
"aux", "cfg_ahb", "ref", "com_aux".
- resets: a list of phandles and reset controller specifier pairs, - resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names. one for each entry in reset-names.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment