Commit 86ec5ec8 authored by David Brownell's avatar David Brownell Committed by Jean Delvare

i2c-remove-redundant-i2c_client-list.patch

This goes on top of the patch removing most i2c_adapter.clients usage,
updating i2c_attach_client:

 - Don't call device_register() while holding clist_lock.  This
   removes a self-deadlock when on the i2c_driver.probe() path,
   for drivers that need to attach new devices (e.g. dummies).

 - Remove a redundant address check.  The driver model core does
   this as a consequence of guaranteeing unique names.

 - Move the "device registered" diagnostic so that it never lies;
   previously, on error paths it would falsely report success.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 961f80f9
......@@ -709,13 +709,6 @@ int i2c_attach_client(struct i2c_client *client)
struct i2c_adapter *adapter = client->adapter;
int res = 0;
mutex_lock(&adapter->clist_lock);
if (i2c_check_addr(client->adapter, client->addr)) {
res = -EBUSY;
goto out_unlock;
}
list_add_tail(&client->list,&adapter->clients);
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
......@@ -730,13 +723,17 @@ int i2c_attach_client(struct i2c_client *client)
snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id),
"%d-%04x", i2c_adapter_id(adapter), client->addr);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
client->name, client->dev.bus_id);
res = device_register(&client->dev);
if (res)
goto out_list;
goto out_err;
mutex_lock(&adapter->clist_lock);
list_add_tail(&client->list, &adapter->clients);
mutex_unlock(&adapter->clist_lock);
dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n",
client->name, client->dev.bus_id);
if (adapter->client_register) {
if (adapter->client_register(client)) {
dev_dbg(&adapter->dev, "client_register "
......@@ -747,12 +744,9 @@ int i2c_attach_client(struct i2c_client *client)
return 0;
out_list:
list_del(&client->list);
out_err:
dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
"(%d)\n", client->name, client->addr, res);
out_unlock:
mutex_unlock(&adapter->clist_lock);
return res;
}
EXPORT_SYMBOL(i2c_attach_client);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment