Skip to content

L
linux
Commit 874e5208 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Greg Kroah-Hartman
Browse files
Options

x86, mrst: remove Moorestown specific serial drivers 

Intel Moorestown platform support was removed few years ago. This is a follow
up which removes Moorestown specific code for the serial devices. It includes
mrst_max3110 and earlyprintk bits.

This was used on SFI (Medfield, Clovertrail) based platforms as well, though
new ones use normal serial interface for the console service.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: default avatarDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 934084a9
Hide whitespace changes
Inline Side-by-side
Showing with 4 additions and 1242 deletions
arch/x86/include/asm/intel-mid.h
View file @ 874e5208
......@@ -136,9 +136,6 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
#define SFI_MTMR_MAX_NUM 8
#define SFI_MRTC_MAX 8
extern struct console early_mrst_console;
extern void mrst_early_console_init(void);
extern struct console early_hsu_console;
extern void hsu_early_console_init(const char *);
......
arch/x86/kernel/early_printk.c
View file @ 874e5208
......@@ -226,11 +226,6 @@ static int __init setup_early_printk(char *buf)
early_console_register(&xenboot_console, keep);
#endif
#ifdef CONFIG_EARLY_PRINTK_INTEL_MID
if (!strncmp(buf, "mrst", 4)) {
mrst_early_console_init();
early_console_register(&early_mrst_console, keep);
}
if (!strncmp(buf, "hsu", 3)) {
hsu_early_console_init(buf + 3);
early_console_register(&early_hsu_console, keep);
......
arch/x86/platform/intel-mid/device_libs/Makefile
View file @ 874e5208
......@@ -16,8 +16,6 @@ obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
# SPI Devices
obj-$(subst m,y,$(CONFIG_SERIAL_MRST_MAX3110)) += platform_max3111.o
# MISC Devices
obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o
arch/x86/platform/intel-mid/device_libs/platform_max3111.c deleted 100644 → 0
View file @ 934084a9
/*
* platform_max3111.c: max3111 platform data initilization file
*
* (C) Copyright 2013 Intel Corporation
* Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/intel-mid.h>
static void __init *max3111_platform_data(void *info)
{
struct spi_board_info *spi_info = info;
int intr = get_gpio_by_name("max3111_int");
spi_info->mode = SPI_MODE_0;
if (intr == -1)
return NULL;
spi_info->irq = intr + INTEL_MID_IRQ_OFFSET;
return NULL;
}
static const struct devs_id max3111_dev_id __initconst = {
.name = "spi_max3111",
.type = SFI_DEV_TYPE_SPI,
.get_platform_data = &max3111_platform_data,
};
sfi_device(max3111_dev_id);
arch/x86/platform/intel-mid/early_printk_intel_mid.c
View file @ 874e5208
......@@ -10,15 +10,13 @@
*/
/*
* This file implements two early consoles named mrst and hsu.
* mrst is based on Maxim3110 spi-uart device, it exists in both
* Moorestown and Medfield platforms, while hsu is based on a High
* Speed UART device which only exists in the Medfield platform
* This file implements early console named hsu.
* hsu is based on a High Speed UART device which only exists in the Medfield
* platform
*/
#include <linux/serial_reg.h>
#include <linux/serial_mfd.h>
#include <linux/kmsg_dump.h>
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/delay.h>
......@@ -28,216 +26,6 @@
#include <asm/pgtable.h>
#include <asm/intel-mid.h>
#define MRST_SPI_TIMEOUT 0x200000
#define MRST_REGBASE_SPI0 0xff128000
#define MRST_REGBASE_SPI1 0xff128400
#define MRST_CLK_SPI0_REG 0xff11d86c
/* Bit fields in CTRLR0 */
#define SPI_DFS_OFFSET 0
#define SPI_FRF_OFFSET 4
#define SPI_FRF_SPI 0x0
#define SPI_FRF_SSP 0x1
#define SPI_FRF_MICROWIRE 0x2
#define SPI_FRF_RESV 0x3
#define SPI_MODE_OFFSET 6
#define SPI_SCPH_OFFSET 6
#define SPI_SCOL_OFFSET 7
#define SPI_TMOD_OFFSET 8
#define SPI_TMOD_TR 0x0 /* xmit & recv */
#define SPI_TMOD_TO 0x1 /* xmit only */
#define SPI_TMOD_RO 0x2 /* recv only */
#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
#define SPI_SLVOE_OFFSET 10
#define SPI_SRL_OFFSET 11
#define SPI_CFS_OFFSET 12
/* Bit fields in SR, 7 bits */
#define SR_MASK 0x7f /* cover 7 bits */
#define SR_BUSY (1 << 0)
#define SR_TF_NOT_FULL (1 << 1)
#define SR_TF_EMPT (1 << 2)
#define SR_RF_NOT_EMPT (1 << 3)
#define SR_RF_FULL (1 << 4)
#define SR_TX_ERR (1 << 5)
#define SR_DCOL (1 << 6)
struct dw_spi_reg {
u32 ctrl0;
u32 ctrl1;
u32 ssienr;
u32 mwcr;
u32 ser;
u32 baudr;
u32 txfltr;
u32 rxfltr;
u32 txflr;
u32 rxflr;
u32 sr;
u32 imr;
u32 isr;
u32 risr;
u32 txoicr;
u32 rxoicr;
u32 rxuicr;
u32 msticr;
u32 icr;
u32 dmacr;
u32 dmatdlr;
u32 dmardlr;
u32 idr;
u32 version;
/* Currently operates as 32 bits, though only the low 16 bits matter */
u32 dr;
} __packed;
#define dw_readl(dw, name) __raw_readl(&(dw)->name)
#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name)
/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
static u32 *pclk_spi0;
/* Always contains an accessible address, start with 0 */
static struct dw_spi_reg *pspi;
static struct kmsg_dumper dw_dumper;
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
enum kmsg_dump_reason reason)
{
static char line[1024];
size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
static void max3110_write_config(void)
{
u16 config;
config = 0xc001;
dw_writel(pspi, dr, config);
}
/* Translate char to a eligible word and send to max3110 */
static void max3110_write_data(char c)
{
u16 data;
data = 0x8000 | c;
dw_writel(pspi, dr, data);
}
void mrst_early_console_init(void)
{
u32 ctrlr0 = 0;
u32 spi0_cdiv;
u32 freq; /* Freqency info only need be searched once */
/* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
MRST_CLK_SPI0_REG);
spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
freq = 100000000 / (spi0_cdiv + 1);
if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL)
mrst_spi_paddr = MRST_REGBASE_SPI1;
pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
mrst_spi_paddr);
/* Disable SPI controller */
dw_writel(pspi, ssienr, 0);
/* Set control param, 8 bits, transmit only mode */
ctrlr0 = dw_readl(pspi, ctrl0);
ctrlr0 &= 0xfcc0;
ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
| (SPI_TMOD_TO << SPI_TMOD_OFFSET);
dw_writel(pspi, ctrl0, ctrlr0);
/*
* Change the spi0 clk to comply with 115200 bps, use 100000 to
* calculate the clk dividor to make the clock a little slower
* than real baud rate.
*/
dw_writel(pspi, baudr, freq/100000);
/* Disable all INT for early phase */
dw_writel(pspi, imr, 0x0);
/* Set the cs to spi-uart */
dw_writel(pspi, ser, 0x2);
/* Enable the HW, the last step for HW init */
dw_writel(pspi, ssienr, 0x1);
/* Set the default configuration */
max3110_write_config();
/* Register the kmsg dumper */
if (!dumper_registered) {
dw_dumper.dump = dw_kmsg_dump;
kmsg_dump_register(&dw_dumper);
dumper_registered = 1;
}
}
/* Slave select should be called in the read/write function */
static void early_mrst_spi_putc(char c)
{
unsigned int timeout;
u32 sr;
timeout = MRST_SPI_TIMEOUT;
/* Early putc needs to make sure the TX FIFO is not full */
while (--timeout) {
sr = dw_readl(pspi, sr);
if (!(sr & SR_TF_NOT_FULL))
cpu_relax();
else
break;
}
if (!timeout)
pr_warn("MRST earlycon: timed out\n");
else
max3110_write_data(c);
}
/* Early SPI only uses polling mode */
static void early_mrst_spi_write(struct console *con, const char *str,
unsigned n)
{
int i;
for (i = 0; i < n && *str; i++) {
if (*str == '\n')
early_mrst_spi_putc('\r');
early_mrst_spi_putc(*str);
str++;
}
}
struct console early_mrst_console = {
.name = "earlymrst",
.write = early_mrst_spi_write,
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* Following is the early console based on Medfield HSU (High
* Speed UART) device.
......@@ -259,7 +47,7 @@ void hsu_early_console_init(const char *s)
port = clamp_val(port, 0, 2);
paddr = HSU_PORT_BASE + port * 0x80;
phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
phsu = (void __iomem *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, paddr);
/* Disable FIFO */
writeb(0x0, phsu + UART_FCR);
......
drivers/tty/serial/Kconfig
View file @ 874e5208
......@@ -482,16 +482,6 @@ config SERIAL_SA1100_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_MRST_MAX3110
tristate "SPI UART driver for Max3110"
depends on SPI_DW_PCI
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
help
This is the UART protocol driver for the MAX3110 device on
the Intel Moorestown platform. On other systems use the max3100
driver.
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI
......
drivers/tty/serial/Makefile
View file @ 874e5208
......@@ -77,7 +77,6 @@ obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o
obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
......
drivers/tty/serial/mrst_max3110.c deleted 100644 → 0
View file @ 934084a9
/*
* mrst_max3110.c - spi uart protocol driver for Maxim 3110
*
* Copyright (c) 2008-2010, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
/*
* Note:
* 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
* 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#ifdef CONFIG_MAGIC_SYSRQ
#define SUPPORT_SYSRQ
#endif
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/kthread.h>
#include <linux/spi/spi.h>
#include <linux/pm.h>
#include "mrst_max3110.h"
#define UART_TX_NEEDED 1
#define CON_TX_NEEDED 2
#define BIT_IRQ_PENDING 3
struct uart_max3110 {
struct uart_port port;
struct spi_device *spi;
char name[SPI_NAME_SIZE];
wait_queue_head_t wq;
struct task_struct *main_thread;
struct task_struct *read_thread;
struct mutex thread_mutex;
struct mutex io_mutex;
u32 baud;
u16 cur_conf;
u8 clock;
u8 parity, word_7bits;
u16 irq;
unsigned long uart_flags;
/* console related */
struct circ_buf con_xmit;
};
/* global data structure, may need be removed */
static struct uart_max3110 *pmax;
static int receive_chars(struct uart_max3110 *max,
unsigned short *str, int len);
static int max3110_read_multi(struct uart_max3110 *max);
static void max3110_con_receive(struct uart_max3110 *max);
static int max3110_write_then_read(struct uart_max3110 *max,
const void *txbuf, void *rxbuf, unsigned len, int always_fast)
{
struct spi_device *spi = max->spi;
struct spi_message message;
struct spi_transfer x;
int ret;
mutex_lock(&max->io_mutex);
spi_message_init(&message);
memset(&x, 0, sizeof x);
x.len = len;
x.tx_buf = txbuf;
x.rx_buf = rxbuf;
spi_message_add_tail(&x, &message);
if (always_fast)
x.speed_hz = spi->max_speed_hz;
else if (max->baud)
x.speed_hz = max->baud;
/* Do the i/o */
ret = spi_sync(spi, &message);
mutex_unlock(&max->io_mutex);
return ret;
}
/* Write a 16b word to the device */
static int max3110_out(struct uart_max3110 *max, const u16 out)
{
void *buf;
u16 *obuf, *ibuf;
int ret;
buf = kzalloc(8, GFP_KERNEL | GFP_DMA);
if (!buf)
return -ENOMEM;
obuf = buf;
ibuf = buf + 4;
*obuf = out;
ret = max3110_write_then_read(max, obuf, ibuf, 2, 1);
if (ret) {
pr_warn("%s: get err msg %d when sending 0x%x\n",
__func__, ret, out);
goto exit;
}
receive_chars(max, ibuf, 1);
exit:
kfree(buf);
return ret;
}
/*
* This is usually used to read data from SPIC RX FIFO, which doesn't
* need any delay like flushing character out.
*
* Return how many valide bytes are read back
*/
static int max3110_read_multi(struct uart_max3110 *max)
{
void *buf;
u16 *obuf, *ibuf;
int ret, blen;
blen = M3110_RX_FIFO_DEPTH * sizeof(u16);
buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA);
if (!buf)
return 0;
/* tx/rx always have the same length */
obuf = buf;
ibuf = buf + blen;
if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) {
kfree(buf);
return 0;
}
ret = receive_chars(max, ibuf, M3110_RX_FIFO_DEPTH);
kfree(buf);
return ret;
}
static void serial_m3110_con_putchar(struct uart_port *port, int ch)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
struct circ_buf *xmit = &max->con_xmit;
if (uart_circ_chars_free(xmit)) {
xmit->buf[xmit->head] = (char)ch;
xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1);
}
}
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
*
* The console_lock must be held when we get here.
*/
static void serial_m3110_con_write(struct console *co,
const char *s, unsigned int count)
{
if (!pmax)
return;
uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar);
if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags))
wake_up(&pmax->wq);
}
static int __init
serial_m3110_con_setup(struct console *co, char *options)
{
struct uart_max3110 *max = pmax;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
pr_info("setting up console\n");
if (co->index == -1)
co->index = 0;
if (!max) {
pr_err("pmax is NULL, return\n");
return -ENODEV;
}
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(&max->port, co, baud, parity, bits, flow);
}
static struct tty_driver *serial_m3110_con_device(struct console *co,
int *index)
{
struct uart_driver *p = co->data;
*index = co->index;
return p->tty_driver;
}
static struct uart_driver serial_m3110_reg;
static struct console serial_m3110_console = {
.name = "ttyS",
.write = serial_m3110_con_write,
.device = serial_m3110_con_device,
.setup = serial_m3110_con_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &serial_m3110_reg,
};
static unsigned int serial_m3110_tx_empty(struct uart_port *port)
{
return 1;
}
static void serial_m3110_stop_tx(struct uart_port *port)
{
return;
}
/* stop_rx will be called in spin_lock env */
static void serial_m3110_stop_rx(struct uart_port *port)
{
return;
}
#define WORDS_PER_XFER 128
static void send_circ_buf(struct uart_max3110 *max,
struct circ_buf *xmit)
{
void *buf;
u16 *obuf, *ibuf;
int i, len, blen, dma_size, left, ret = 0;
dma_size = WORDS_PER_XFER * sizeof(u16) * 2;
buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA);
if (!buf)
return;
obuf = buf;
ibuf = buf + dma_size/2;
while (!uart_circ_empty(xmit)) {
left = uart_circ_chars_pending(xmit);
while (left) {
len = min(left, WORDS_PER_XFER);
blen = len * sizeof(u16);
memset(ibuf, 0, blen);
for (i = 0; i < len; i++) {
obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG;
xmit->tail = (xmit->tail + 1) &
(UART_XMIT_SIZE - 1);
}
/* Fail to send msg to console is not very critical */
ret = max3110_write_then_read(max, obuf, ibuf, blen, 0);
if (ret)
pr_warn("%s: get err msg %d\n", __func__, ret);
receive_chars(max, ibuf, len);
max->port.icount.tx += len;
left -= len;
}
}
kfree(buf);
}
static void transmit_char(struct uart_max3110 *max)
{
struct uart_port *port = &max->port;
struct circ_buf *xmit = &port->state->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
send_circ_buf(max, xmit);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
serial_m3110_stop_tx(port);
}
/*
* This will be called by uart_write() and tty_write, can't
* go to sleep
*/
static void serial_m3110_start_tx(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags))
wake_up(&max->wq);
}
static int
receive_chars(struct uart_max3110 *max, unsigned short *str, int len)
{
struct uart_port *port = &max->port;
struct tty_port *tport;
char buf[M3110_RX_FIFO_DEPTH];
int r, w, usable;
/* If uart is not opened, just return */
if (!port->state)
return 0;
tport = &port->state->port;
for (r = 0, w = 0; r < len; r++) {
if (str[r] & MAX3110_BREAK &&
uart_handle_break(port))
continue;
if (str[r] & MAX3110_READ_DATA_AVAILABLE) {
if (uart_handle_sysrq_char(port, str[r] & 0xff))
continue;
buf[w++] = str[r] & 0xff;
}
}
if (!w)
return 0;
for (r = 0; w; r += usable, w -= usable) {
usable = tty_buffer_request_room(tport, w);
if (usable) {
tty_insert_flip_string(tport, buf + r, usable);
port->icount.rx += usable;
}
}
tty_flip_buffer_push(tport);
return r;
}
/*
* This routine will be used in read_thread or RX IRQ handling,
* it will first do one round buffer read(8 words), if there is some
* valid RX data, will try to read 5 more rounds till all data
* is read out.
*
* Use stack space as data buffer to save some system load, and chose
* 504 Btyes as a threadhold to do a bulk push to upper tty layer when
* receiving bulk data, a much bigger buffer may cause stack overflow
*/
static void max3110_con_receive(struct uart_max3110 *max)
{
int loop = 1, num;
do {
num = max3110_read_multi(max);
if (num) {
loop = 5;
}
} while (--loop);
}
static int max3110_main_thread(void *_max)
{
struct uart_max3110 *max = _max;
wait_queue_head_t *wq = &max->wq;
int ret = 0;
struct circ_buf *xmit = &max->con_xmit;
pr_info("start main thread\n");
do {
wait_event_interruptible(*wq,
max->uart_flags || kthread_should_stop());
mutex_lock(&max->thread_mutex);
if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags))
max3110_con_receive(max);
/* first handle console output */
if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags))
send_circ_buf(max, xmit);
/* handle uart output */
if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags))
transmit_char(max);
mutex_unlock(&max->thread_mutex);
} while (!kthread_should_stop());
return ret;
}
static irqreturn_t serial_m3110_irq(int irq, void *dev_id)
{
struct uart_max3110 *max = dev_id;
/* max3110's irq is a falling edge, not level triggered,
* so no need to disable the irq */
if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags))
wake_up(&max->wq);
return IRQ_HANDLED;
}
/* if don't use RX IRQ, then need a thread to polling read */
static int max3110_read_thread(void *_max)
{
struct uart_max3110 *max = _max;
pr_info("start read thread\n");
do {
/*
* If can't acquire the mutex, it means the main thread
* is running which will also perform the rx job
*/
if (mutex_trylock(&max->thread_mutex)) {
max3110_con_receive(max);
mutex_unlock(&max->thread_mutex);
}
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ / 20);
} while (!kthread_should_stop());
return 0;
}
static int serial_m3110_startup(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
u16 config = 0;
int ret = 0;
if (port->line != 0) {
pr_err("uart port startup failed\n");
return -1;
}
/* Disable all IRQ and config it to 115200, 8n1 */
config = WC_TAG | WC_FIFO_ENABLE
| WC_1_STOPBITS
| WC_8BIT_WORD
| WC_BAUD_DR2;
/* as we use thread to handle tx/rx, need set low latency */
port->state->port.low_latency = 1;
if (max->irq) {
/* Enable RX IRQ only */
config |= WC_RXA_IRQ_ENABLE;
} else {
/* If IRQ is disabled, start a read thread for input data */
max->read_thread =
kthread_run(max3110_read_thread, max, "max3110_read");
if (IS_ERR(max->read_thread)) {
ret = PTR_ERR(max->read_thread);
max->read_thread = NULL;
pr_err("Can't create read thread!\n");
return ret;
}
}
ret = max3110_out(max, config);
if (ret) {
if (max->read_thread)
kthread_stop(max->read_thread);
max->read_thread = NULL;
return ret;
}
max->cur_conf = config;
return 0;
}
static void serial_m3110_shutdown(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
u16 config;
if (max->read_thread) {
kthread_stop(max->read_thread);
max->read_thread = NULL;
}
/* Disable interrupts from this port */
config = WC_TAG | WC_SW_SHDI;
max3110_out(max, config);
}
static void serial_m3110_release_port(struct uart_port *port)
{
}
static int serial_m3110_request_port(struct uart_port *port)
{
return 0;
}
static void serial_m3110_config_port(struct uart_port *port, int flags)
{
port->type = PORT_MAX3100;
}
static int
serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser)
{
/* we don't want the core code to modify any port params */
return -EINVAL;
}
static const char *serial_m3110_type(struct uart_port *port)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
return max->name;
}
static void
serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct uart_max3110 *max =
container_of(port, struct uart_max3110, port);
unsigned char cval;
unsigned int baud, parity = 0;
int clk_div = -1;
u16 new_conf = max->cur_conf;
switch (termios->c_cflag & CSIZE) {
case CS7:
cval = UART_LCR_WLEN7;
new_conf |= WC_7BIT_WORD;
break;
default:
/* We only support CS7 & CS8 */
termios->c_cflag &= ~CSIZE;
termios->c_cflag |= CS8;
case CS8:
cval = UART_LCR_WLEN8;
new_conf |= WC_8BIT_WORD;
break;
}
baud = uart_get_baud_rate(port, termios, old, 0, 230400);
/* First calc the div for 1.8MHZ clock case */
switch (baud) {
case 300:
clk_div = WC_BAUD_DR384;
break;
case 600:
clk_div = WC_BAUD_DR192;
break;
case 1200:
clk_div = WC_BAUD_DR96;
break;
case 2400:
clk_div = WC_BAUD_DR48;
break;
case 4800:
clk_div = WC_BAUD_DR24;
break;
case 9600:
clk_div = WC_BAUD_DR12;
break;
case 19200:
clk_div = WC_BAUD_DR6;
break;
case 38400:
clk_div = WC_BAUD_DR3;
break;
case 57600:
clk_div = WC_BAUD_DR2;
break;
case 115200:
clk_div = WC_BAUD_DR1;
break;
case 230400:
if (max->clock & MAX3110_HIGH_CLK)
break;
default:
/* Pick the previous baud rate */
baud = max->baud;
clk_div = max->cur_conf & WC_BAUD_DIV_MASK;
tty_termios_encode_baud_rate(termios, baud, baud);
}
if (max->clock & MAX3110_HIGH_CLK) {
clk_div += 1;
/* High clk version max3110 doesn't support B300 */
if (baud == 300) {
baud = 600;
clk_div = WC_BAUD_DR384;
}
if (baud == 230400)
clk_div = WC_BAUD_DR1;
tty_termios_encode_baud_rate(termios, baud, baud);
}
new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div;
if (unlikely(termios->c_cflag & CMSPAR))
termios->c_cflag &= ~CMSPAR;
if (termios->c_cflag & CSTOPB)
new_conf |= WC_2_STOPBITS;
else
new_conf &= ~WC_2_STOPBITS;
if (termios->c_cflag & PARENB) {
new_conf |= WC_PARITY_ENABLE;
parity |= UART_LCR_PARITY;
} else
new_conf &= ~WC_PARITY_ENABLE;
if (!(termios->c_cflag & PARODD))
parity |= UART_LCR_EPAR;
max->parity = parity;
uart_update_timeout(port, termios->c_cflag, baud);
new_conf |= WC_TAG;
if (new_conf != max->cur_conf) {
if (!max3110_out(max, new_conf)) {
max->cur_conf = new_conf;
max->baud = baud;
}
}
}
/* Don't handle hw handshaking */
static unsigned int serial_m3110_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR;
}
static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
}
static void serial_m3110_break_ctl(struct uart_port *port, int break_state)
{
}
static void serial_m3110_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
}
static struct uart_ops serial_m3110_ops = {
.tx_empty = serial_m3110_tx_empty,
.set_mctrl = serial_m3110_set_mctrl,
.get_mctrl = serial_m3110_get_mctrl,
.stop_tx = serial_m3110_stop_tx,
.start_tx = serial_m3110_start_tx,
.stop_rx = serial_m3110_stop_rx,
.break_ctl = serial_m3110_break_ctl,
.startup = serial_m3110_startup,
.shutdown = serial_m3110_shutdown,
.set_termios = serial_m3110_set_termios,
.pm = serial_m3110_pm,
.type = serial_m3110_type,
.release_port = serial_m3110_release_port,
.request_port = serial_m3110_request_port,
.config_port = serial_m3110_config_port,
.verify_port = serial_m3110_verify_port,
};
static struct uart_driver serial_m3110_reg = {
.owner = THIS_MODULE,
.driver_name = "MRST serial",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
.cons = &serial_m3110_console,
};
#ifdef CONFIG_PM_SLEEP
static int serial_m3110_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct uart_max3110 *max = spi_get_drvdata(spi);
if (max->irq > 0)
disable_irq(max->irq);
uart_suspend_port(&serial_m3110_reg, &max->port);
max3110_out(max, max->cur_conf | WC_SW_SHDI);
return 0;
}
static int serial_m3110_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
struct uart_max3110 *max = spi_get_drvdata(spi);
max3110_out(max, max->cur_conf);
uart_resume_port(&serial_m3110_reg, &max->port);
if (max->irq > 0)
enable_irq(max->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(serial_m3110_pm_ops, serial_m3110_suspend,
serial_m3110_resume);
#define SERIAL_M3110_PM_OPS (&serial_m3110_pm_ops)
#else
#define SERIAL_M3110_PM_OPS NULL
#endif
static int serial_m3110_probe(struct spi_device *spi)
{
struct uart_max3110 *max;
void *buffer;
u16 res;
int ret = 0;
max = kzalloc(sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
/* Set spi info */
spi->bits_per_word = 16;
max->clock = MAX3110_HIGH_CLK;
spi_setup(spi);
max->port.type = PORT_MAX3100;
max->port.fifosize = 2; /* Only have 16b buffer */
max->port.ops = &serial_m3110_ops;
max->port.line = 0;
max->port.dev = &spi->dev;
max->port.uartclk = 115200;
max->spi = spi;
strcpy(max->name, spi->modalias);
max->irq = (u16)spi->irq;
mutex_init(&max->thread_mutex);
mutex_init(&max->io_mutex);
max->word_7bits = 0;
max->parity = 0;
max->baud = 0;
max->cur_conf = 0;
max->uart_flags = 0;
/* Check if reading configuration register returns something sane */
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
}
buffer = (void *)__get_free_page(GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err_get_page;
}
max->con_xmit.buf = buffer;
max->con_xmit.head = 0;
max->con_xmit.tail = 0;
init_waitqueue_head(&max->wq);
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
ret = PTR_ERR(max->main_thread);
goto err_kthread;
}
if (max->irq) {
ret = request_irq(max->irq, serial_m3110_irq,
IRQ_TYPE_EDGE_FALLING, "max3110", max);
if (ret) {
max->irq = 0;
dev_warn(&spi->dev,
"unable to allocate IRQ, will use polling method\n");
}
}
spi_set_drvdata(spi, max);
pmax = max;
/* Give membase a psudo value to pass serial_core's check */
max->port.membase = (unsigned char __iomem *)0xff110000;
uart_add_one_port(&serial_m3110_reg, &max->port);
return 0;
err_kthread:
free_page((unsigned long)buffer);
err_get_page:
kfree(max);
return ret;
}
static int serial_m3110_remove(struct spi_device *dev)
{
struct uart_max3110 *max = spi_get_drvdata(dev);
if (!max)
return 0;
uart_remove_one_port(&serial_m3110_reg, &max->port);
free_page((unsigned long)max->con_xmit.buf);
if (max->irq)
free_irq(max->irq, max);
if (max->main_thread)
kthread_stop(max->main_thread);
kfree(max);
return 0;
}
static struct spi_driver uart_max3110_driver = {
.driver = {
.name = "spi_max3111",
.owner = THIS_MODULE,
.pm = SERIAL_M3110_PM_OPS,
},
.probe = serial_m3110_probe,
.remove = serial_m3110_remove,
};
static int __init serial_m3110_init(void)
{
int ret = 0;
ret = uart_register_driver(&serial_m3110_reg);
if (ret)
return ret;
ret = spi_register_driver(&uart_max3110_driver);
if (ret)
uart_unregister_driver(&serial_m3110_reg);
return ret;
}
static void __exit serial_m3110_exit(void)
{
spi_unregister_driver(&uart_max3110_driver);
uart_unregister_driver(&serial_m3110_reg);
}
module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:max3110-uart");
drivers/tty/serial/mrst_max3110.h deleted 100644 → 0
View file @ 934084a9
#ifndef _MRST_MAX3110_H
#define _MRST_MAX3110_H
#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
/* status bits for all 4 MAX3110 operate modes */
#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
#define MAX3110_BREAK (1 << 10)
#define WC_TAG (3 << 14)
#define RC_TAG (1 << 14)
#define WD_TAG (2 << 14)
#define RD_TAG (0 << 14)
/* bits def for write configuration */
#define WC_FIFO_ENABLE_MASK (1 << 13)
#define WC_FIFO_ENABLE (0 << 13)
#define WC_SW_SHDI (1 << 12)
#define WC_IRQ_MASK (0xF << 8)
#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX available irq */
#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
#define WC_IRDA_ENABLE (1 << 7)
#define WC_STOPBITS_MASK (1 << 6)
#define WC_2_STOPBITS (1 << 6)
#define WC_1_STOPBITS (0 << 6)
#define WC_PARITY_ENABLE_MASK (1 << 5)
#define WC_PARITY_ENABLE (1 << 5)
#define WC_WORDLEN_MASK (1 << 4)
#define WC_7BIT_WORD (1 << 4)
#define WC_8BIT_WORD (0 << 4)
#define WC_BAUD_DIV_MASK (0xF)
#define WC_BAUD_DR1 (0x0)
#define WC_BAUD_DR2 (0x1)
#define WC_BAUD_DR4 (0x2)
#define WC_BAUD_DR8 (0x3)
#define WC_BAUD_DR16 (0x4)
#define WC_BAUD_DR32 (0x5)
#define WC_BAUD_DR64 (0x6)
#define WC_BAUD_DR128 (0x7)
#define WC_BAUD_DR3 (0x8)
#define WC_BAUD_DR6 (0x9)
#define WC_BAUD_DR12 (0xA)
#define WC_BAUD_DR24 (0xB)
#define WC_BAUD_DR48 (0xC)
#define WC_BAUD_DR96 (0xD)
#define WC_BAUD_DR192 (0xE)
#define WC_BAUD_DR384 (0xF)
#define M3110_RX_FIFO_DEPTH 8
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7