Merge tag 'v4.15-rockchip-dts32-2' of...

Merge tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner:

CEC support for the two rk3288-firefly variants and general hdmi support
for the firefly-reload. A lot of additions and corrections for the
rk3288-vyasa and thermal support for the rv1108.

* tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload
  ARM: dts: rockchip: define the two possible rk3288 CEC pins
  ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288
  ARM: dts: rockchip: Add io domains for rk3288-vyasa
  ARM: dts: rockchip: Add usb otg for rk3288-vyasa
  ARM: dts: rockchip: Add usb host for rk3288-vyasa
  ARM: dts: rockchip: Add gmac support for rk3288-vyasa board
  ARM: dts: rockchip: Add regulators for rk3288-vyasa
  ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa
  ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa
  ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board
  ARM: dts: rockchip: add thermal nodes for RV1108 SoC
  ARM: dts: rockchip: add tsadc node for RV1108 SoC
  ARM: dts: rockchip: add RGA device node for RK3288

arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi

@@ -184,6 +184,7 @@ vdd10_lcd: REG6 {
 				regulator-name = "vdd10_lcd";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
 			};
 
 			vcca_18: REG7  {
@@ -223,6 +224,7 @@ vcc18_lcd: REG12 {
 				regulator-name = "vcc18_lcd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 		};
 	};

arch/arm/boot/dts/rk3288-firefly-reload.dts

@@ -226,6 +226,13 @@ vbat_wl: wifi-regulator {
 	};
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+	status = "okay";
+};
+
 &i2c0 {
 	hym8563: hym8563@51 {
 		compatible = "haoyu,hym8563";
@@ -255,6 +262,10 @@ codec: es8328@10 {
 	};
 };
 
+&i2c5 {
+	status = "okay";
+};
+
 &i2s {
 	status = "okay";
 };

arch/arm/boot/dts/rk3288-vyasa.dts

@@ -56,25 +56,98 @@ memory {
 		device_type = "memory";
 	};
 
-	vcc_sd: sdmmc-regulator {
+	dc12_vbat: dc12-vbat {
 		compatible = "regulator-fixed";
-		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc_pwr>;
-		regulator-name = "vcc_sd";
+		regulator-name = "dc12_vbat";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vboot_3v3: vboot-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
 	};
 
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vboot_5v: vboot-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vboot_sv";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	v3g_3v3: v3g-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3g_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc12_vbat>;
+	};
+
+	vsus_5v: vsus-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vsus_5v";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vusb1_5v: vusb1-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb1_5v";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	vusb2_5v: vusb2-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vusb2_5v";
+		enable-active-high;
+		gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
 	};
 };
 
@@ -82,6 +155,22 @@ &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu>;
 	status = "okay";
@@ -121,8 +210,8 @@ rk808: pmic@1b {
 		vcc12-supply = <&vcc_io>;
 
 		regulators {
-			vdd_cpu: vdd_log: DCDC_REG1 {
-				regulator-name = "vdd_log";
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
@@ -260,8 +349,8 @@ regulator-state-mem {
 				};
 			};
 
-			vcc33_sd: SWITCH_REG1 {
-				regulator-name = "vcc33_sd";
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -289,6 +378,21 @@ &i2c2 {
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_18>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&vcc_io>;
+	flash0-suuply = <&vcc_18>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830 = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vcc_18>;
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -312,6 +416,24 @@ &uart2 {
 	status = "okay";
 };
 
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy_pwr_en>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
@@ -333,15 +455,44 @@ &wdt {
 };
 
 &pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-	sdmmc {
-		sdmmc_pwr: sdmmc-pwr {
-			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+	usb_host {
+		phy_pwr_en: phy-pwr-en {
+			rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+
 		};
 	};
 };

arch/arm/boot/dts/rk3288.dtsi

@@ -972,6 +972,17 @@ isp_mmu: iommu@ff914000 {
 		status = "disabled";
 	};
 
+	rga: rga@ff920000 {
+		compatible = "rockchip,rk3288-rga";
+		reg = <0x0 0xff920000 0x0 0x180>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+		clock-names = "aclk", "hclk", "sclk";
+		power-domains = <&power RK3288_PD_VIO>;
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>;
+		reset-names = "core", "axi", "ahb";
+	};
+
 	vopb: vop@ff930000 {
 		compatible = "rockchip,rk3288-vop";
 		reg = <0x0 0xff930000 0x0 0x19c>;
@@ -1167,8 +1178,8 @@ hdmi: hdmi@ff980000 {
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
-		clock-names = "iahb", "isfr";
+		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";
 
@@ -1470,6 +1481,14 @@ gpio8: gpio8@ff7f0000 {
 		};
 
 		hdmi {
+			hdmi_cec_c0: hdmi-cec-c0 {
+				rockchip,pins = <7 RK_PC0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			hdmi_cec_c7: hdmi-cec-c7 {
+				rockchip,pins = <7 RK_PC7 RK_FUNC_4 &pcfg_pull_none>;
+			};
+
 			hdmi_ddc: hdmi-ddc {
 				rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
 						<7 20 RK_FUNC_2 &pcfg_pull_none>;

arch/arm/boot/dts/rv1108-evb.dts

@@ -222,6 +222,10 @@ &sdmmc {
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+};
+
 &u2phy {
 	status = "okay";
 

arch/arm/boot/dts/rv1108.dtsi

@@ -43,6 +43,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/rv1108-cru.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -70,6 +71,8 @@ cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <75>;
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
@@ -329,6 +332,60 @@ watchdog: wdt@10360000 {
 		status = "disabled";
 	};
 
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <50>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@10370000 {
+		compatible = "rockchip,rv1108-tsadc";
+		reg = <0x10370000 0x100>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,hw-tshut-temp = <120000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	adc: adc@1038c000 {
 		compatible = "rockchip,rv1108-saradc", "rockchip,rk3399-saradc";
 		reg = <0x1038c000 0x100>;
@@ -740,6 +797,16 @@ sdmmc_bus4: sdmmc-bus4 {
 			};
 		};
 
+		tsadc {
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PB7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,