Merge branches 'upstream-fixes' and 'magicmouse' into for-linus

drivers/hid/hid-ids.h

@@ -277,6 +277,7 @@
 #define USB_DEVICE_ID_PENPOWER		0x00f4
 
 #define USB_VENDOR_ID_GREENASIA		0x0e8f
+#define USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD	0x3013
 
 #define USB_VENDOR_ID_GRETAGMACBETH	0x0971
 #define USB_DEVICE_ID_GRETAGMACBETH_HUEY	0x2005

drivers/hid/hid-magicmouse.c

@@ -81,6 +81,28 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
 #define NO_TOUCHES -1
 #define SINGLE_TOUCH_UP -2
 
+/* Touch surface information. Dimension is in hundredths of a mm, min and max
+ * are in units. */
+#define MOUSE_DIMENSION_X (float)9056
+#define MOUSE_MIN_X -1100
+#define MOUSE_MAX_X 1258
+#define MOUSE_RES_X ((MOUSE_MAX_X - MOUSE_MIN_X) / (MOUSE_DIMENSION_X / 100))
+#define MOUSE_DIMENSION_Y (float)5152
+#define MOUSE_MIN_Y -1589
+#define MOUSE_MAX_Y 2047
+#define MOUSE_RES_Y ((MOUSE_MAX_Y - MOUSE_MIN_Y) / (MOUSE_DIMENSION_Y / 100))
+
+#define TRACKPAD_DIMENSION_X (float)13000
+#define TRACKPAD_MIN_X -2909
+#define TRACKPAD_MAX_X 3167
+#define TRACKPAD_RES_X \
+	((TRACKPAD_MAX_X - TRACKPAD_MIN_X) / (TRACKPAD_DIMENSION_X / 100))
+#define TRACKPAD_DIMENSION_Y (float)11000
+#define TRACKPAD_MIN_Y -2456
+#define TRACKPAD_MAX_Y 2565
+#define TRACKPAD_RES_Y \
+	((TRACKPAD_MAX_Y - TRACKPAD_MIN_Y) / (TRACKPAD_DIMENSION_Y / 100))
+
 /**
  * struct magicmouse_sc - Tracks Magic Mouse-specific data.
  * @input: Input device through which we report events.
@@ -406,17 +428,31 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
 		 * inverse of the reported Y.
 		 */
 		if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
-			input_set_abs_params(input, ABS_MT_POSITION_X, -1100,
-				1358, 4, 0);
-			input_set_abs_params(input, ABS_MT_POSITION_Y, -1589,
-				2047, 4, 0);
+			input_set_abs_params(input, ABS_MT_POSITION_X,
+				MOUSE_MIN_X, MOUSE_MAX_X, 4, 0);
+			input_set_abs_params(input, ABS_MT_POSITION_Y,
+				MOUSE_MIN_Y, MOUSE_MAX_Y, 4, 0);
+
+			input_abs_set_res(input, ABS_MT_POSITION_X,
+				MOUSE_RES_X);
+			input_abs_set_res(input, ABS_MT_POSITION_Y,
+				MOUSE_RES_Y);
 		} else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
-			input_set_abs_params(input, ABS_X, -2909, 3167, 4, 0);
-			input_set_abs_params(input, ABS_Y, -2456, 2565, 4, 0);
-			input_set_abs_params(input, ABS_MT_POSITION_X, -2909,
-				3167, 4, 0);
-			input_set_abs_params(input, ABS_MT_POSITION_Y, -2456,
-				2565, 4, 0);
+			input_set_abs_params(input, ABS_X, TRACKPAD_MIN_X,
+				TRACKPAD_MAX_X, 4, 0);
+			input_set_abs_params(input, ABS_Y, TRACKPAD_MIN_Y,
+				TRACKPAD_MAX_Y, 4, 0);
+			input_set_abs_params(input, ABS_MT_POSITION_X,
+				TRACKPAD_MIN_X, TRACKPAD_MAX_X, 4, 0);
+			input_set_abs_params(input, ABS_MT_POSITION_Y,
+				TRACKPAD_MIN_Y, TRACKPAD_MAX_Y, 4, 0);
+
+			input_abs_set_res(input, ABS_X, TRACKPAD_RES_X);
+			input_abs_set_res(input, ABS_Y, TRACKPAD_RES_Y);
+			input_abs_set_res(input, ABS_MT_POSITION_X,
+				TRACKPAD_RES_X);
+			input_abs_set_res(input, ABS_MT_POSITION_Y,
+				TRACKPAD_RES_Y);
 		}
 
 		input_set_events_per_packet(input, 60);
@@ -501,9 +537,17 @@ static int magicmouse_probe(struct hid_device *hdev,
 	}
 	report->size = 6;
 
+	/*
+	 * Some devices repond with 'invalid report id' when feature
+	 * report switching it into multitouch mode is sent to it.
+	 *
+	 * This results in -EIO from the _raw low-level transport callback,
+	 * but there seems to be no other way of switching the mode.
+	 * Thus the super-ugly hacky success check below.
+	 */
 	ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
 			HID_FEATURE_REPORT);
-	if (ret != sizeof(feature)) {
+	if (ret != -EIO && ret != sizeof(feature)) {
 		hid_err(hdev, "unable to request touch data (%d)\n", ret);
 		goto err_stop_hw;
 	}

drivers/hid/hid-wacom.c

@@ -353,11 +353,7 @@ static int wacom_probe(struct hid_device *hdev,
 	if (ret) {
 		hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
 			 ret);
-		/*
-		 * battery attribute is not critical for the tablet, but if it
-		 * failed then there is no need to create ac attribute
-		 */
-		goto move_on;
+		goto err_battery;
 	}
 
 	wdata->ac.properties = wacom_ac_props;
@@ -371,14 +367,8 @@ static int wacom_probe(struct hid_device *hdev,
 	if (ret) {
 		hid_warn(hdev,
 			 "can't create ac battery attribute, err: %d\n", ret);
-		/*
-		 * ac attribute is not critical for the tablet, but if it
-		 * failed then we don't want to battery attribute to exist
-		 */
-		power_supply_unregister(&wdata->battery);
+		goto err_ac;
 	}
-
-move_on:
 #endif
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
@@ -416,6 +406,13 @@ static int wacom_probe(struct hid_device *hdev,
 
 	return 0;
 
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+err_ac:
+	power_supply_unregister(&wdata->battery);
+err_battery:
+	device_remove_file(&hdev->dev, &dev_attr_speed);
+	hid_hw_stop(hdev);
+#endif
 err_free:
 	kfree(wdata);
 	return ret;
@@ -426,6 +423,7 @@ static void wacom_remove(struct hid_device *hdev)
 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 	struct wacom_data *wdata = hid_get_drvdata(hdev);
 #endif
+	device_remove_file(&hdev->dev, &dev_attr_speed);
 	hid_hw_stop(hdev);
 
 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY

drivers/hid/usbhid/hid-quirks.c

@@ -47,6 +47,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL },
 
 	{ USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_GREENASIA, USB_DEVICE_ID_GREENASIA_DUAL_USB_JOYPAD, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },