media: renesas: vsp1: Add support for RZ/G2L VSPD

The RZ/G2L VSPD provides a single VSPD instance. It has the following
sub modules MAU, CTU, RPF, DPR, LUT, BRS, WPF and LIF.

The VSPD block on RZ/G2L SoCs does not have a version register, so
added a new compatible string "renesas,r9a07g044-vsp2" with a data
pointer containing the info structure. Also the reset line is shared
with the DU module.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drivers/media/platform/renesas/vsp1/vsp1_drv.c

@@ -830,6 +830,18 @@ static const struct vsp1_device_info vsp1_device_infos[] = {
 	},
 };
 
+static const struct vsp1_device_info rzg2l_vsp2_device_info = {
+	.version = VI6_IP_VERSION_MODEL_VSPD_RZG2L,
+	.model = "VSP2-D",
+	.soc = VI6_IP_VERSION_SOC_RZG2L,
+	.gen = 3,
+	.features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL
+		  | VSP1_HAS_NON_ZERO_LBA,
+	.lif_count = 1,
+	.rpf_count = 2,
+	.wpf_count = 1,
+};
+
 static const struct vsp1_device_info *vsp1_lookup_info(struct vsp1_device *vsp1)
 {
 	const struct vsp1_device_info *info;
@@ -980,6 +992,7 @@ static int vsp1_remove(struct platform_device *pdev)
 static const struct of_device_id vsp1_of_match[] = {
 	{ .compatible = "renesas,vsp1" },
 	{ .compatible = "renesas,vsp2" },
+	{ .compatible = "renesas,r9a07g044-vsp2", .data = &rzg2l_vsp2_device_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, vsp1_of_match);

drivers/media/platform/renesas/vsp1/vsp1_lif.c

@@ -107,6 +107,7 @@ static void lif_configure_stream(struct vsp1_entity *entity,
 
 	case VI6_IP_VERSION_MODEL_VSPDL_GEN3:
 	case VI6_IP_VERSION_MODEL_VSPD_V3:
+	case VI6_IP_VERSION_MODEL_VSPD_RZG2L:
 		hbth = 0;
 		obth = 1500;
 		lbth = 0;
@@ -130,10 +131,10 @@ static void lif_configure_stream(struct vsp1_entity *entity,
 			VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN);
 
 	/*
-	 * On R-Car V3M the LIF0 buffer attribute register has to be set to a
-	 * non-default value to guarantee proper operation (otherwise artifacts
-	 * may appear on the output). The value required by the manual is not
-	 * explained but is likely a buffer size or threshold.
+	 * On R-Car V3M and RZ/G2L the LIF0 buffer attribute register has to be
+	 * set to a non-default value to guarantee proper operation (otherwise
+	 * artifacts may appear on the output). The value required by the
+	 * manual is not explained but is likely a buffer size or threshold.
 	 */
 	if (vsp1_feature(entity->vsp1, VSP1_HAS_NON_ZERO_LBA))
 		vsp1_lif_write(lif, dlb, VI6_LIF_LBA,

drivers/media/platform/renesas/vsp1/vsp1_regs.h

@@ -767,6 +767,8 @@
 #define VI6_IP_VERSION_MODEL_VSPDL_GEN3	(0x19 << 8)
 #define VI6_IP_VERSION_MODEL_VSPBS_GEN3	(0x1a << 8)
 #define VI6_IP_VERSION_MODEL_VSPD_V3U	(0x1c << 8)
+/* RZ/G2L SoCs have no version register, So use 0x80 as the model version */
+#define VI6_IP_VERSION_MODEL_VSPD_RZG2L	(0x80 << 8)
 
 #define VI6_IP_VERSION_SOC_MASK		(0xff << 0)
 #define VI6_IP_VERSION_SOC_H2		(0x01 << 0)
@@ -780,6 +782,8 @@
 #define VI6_IP_VERSION_SOC_M3N		(0x04 << 0)
 #define VI6_IP_VERSION_SOC_E3		(0x04 << 0)
 #define VI6_IP_VERSION_SOC_V3U		(0x05 << 0)
+/* RZ/G2L SoCs have no version register, So use 0x80 for SoC Identification */
+#define VI6_IP_VERSION_SOC_RZG2L	(0x80 << 0)
 
 #define VI6_IP_VERSION_VSP_SW		(0xfffe << 16) /* SW VSP version */