Commit 886db6ac authored by Masanari Iida's avatar Masanari Iida Committed by Jiri Kosina

spi: fix comment/printk typos in spi

Correct spelling typo in drivers/spi
Signed-off-by: default avatarMasanari Iida <standby24x7@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 7c6c4d5c
...@@ -475,7 +475,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) ...@@ -475,7 +475,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
/* /*
* due to an spi error we consider transfer as done, * due to an spi error we consider transfer as done,
* so mask all events until before next transfer start * so mask all events until before next transfer start
* and stop the possibly running dma immediatelly * and stop the possibly running dma immediately
*/ */
au1550_spi_mask_ack_all(hw); au1550_spi_mask_ack_all(hw);
au1xxx_dbdma_stop(hw->dma_rx_ch); au1xxx_dbdma_stop(hw->dma_rx_ch);
......
...@@ -467,7 +467,7 @@ bfin_sport_spi_pump_transfers(unsigned long data) ...@@ -467,7 +467,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
dev_dbg(drv_data->dev, "IO write error!\n"); dev_dbg(drv_data->dev, "IO write error!\n");
drv_data->state = ERROR_STATE; drv_data->state = ERROR_STATE;
} else { } else {
/* Update total byte transfered */ /* Update total byte transferred */
message->actual_length += transfer->len; message->actual_length += transfer->len;
/* Move to next transfer of this msg */ /* Move to next transfer of this msg */
drv_data->state = bfin_sport_spi_next_transfer(drv_data); drv_data->state = bfin_sport_spi_next_transfer(drv_data);
......
...@@ -129,7 +129,7 @@ static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) ...@@ -129,7 +129,7 @@ static int tiny_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
unsigned int i; unsigned int i;
if (hw->irq >= 0) { if (hw->irq >= 0) {
/* use intrrupt driven data transfer */ /* use interrupt driven data transfer */
hw->len = t->len; hw->len = t->len;
hw->txp = t->tx_buf; hw->txp = t->tx_buf;
hw->rxp = t->rx_buf; hw->rxp = t->rx_buf;
......
...@@ -101,7 +101,7 @@ struct spi_ppc4xx_regs { ...@@ -101,7 +101,7 @@ struct spi_ppc4xx_regs {
u8 dummy; u8 dummy;
/* /*
* Clock divisor modulus register * Clock divisor modulus register
* This uses the follwing formula: * This uses the following formula:
* SCPClkOut = OPBCLK/(4(CDM + 1)) * SCPClkOut = OPBCLK/(4(CDM + 1))
* or * or
* CDM = (OPBCLK/4*SCPClkOut) - 1 * CDM = (OPBCLK/4*SCPClkOut) - 1
...@@ -201,7 +201,7 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) ...@@ -201,7 +201,7 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t)
return -EINVAL; return -EINVAL;
} }
/* Write new configration */ /* Write new configuration */
out_8(&hw->regs->mode, cs->mode); out_8(&hw->regs->mode, cs->mode);
/* Set the clock */ /* Set the clock */
......
...@@ -505,7 +505,7 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) ...@@ -505,7 +505,7 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
} }
if (unlikely(pspi->max_speed_hz == 0)) { if (unlikely(pspi->max_speed_hz == 0)) {
dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n",
__func__, pspi->max_speed_hz); __func__, pspi->max_speed_hz);
retval = -EINVAL; retval = -EINVAL;
goto err_out; goto err_out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment