net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver

Add Renesas RZ/N1 advanced 5 port switch driver. This switch handles 5
ports including 1 CPU management port. A MDIO bus is also exposed by
this switch and allows to communicate with PHYs connected to the ports.
Each switch port (except for the CPU management ports) is connected to
the MII converter.

This driver includes basic bridging support, more support will be added
later (vlan, etc).
Suggested-by: Jean-Pierre Geslin <jean-pierre.geslin@non.se.com>
Suggested-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/Kconfig

@@ -70,6 +70,15 @@ config NET_DSA_QCA8K
 
 source "drivers/net/dsa/realtek/Kconfig"
 
+config NET_DSA_RZN1_A5PSW
+	tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
+	depends on OF && ARCH_RZN1
+	select NET_DSA_TAG_RZN1_A5PSW
+	select PCS_RZN1_MIIC
+	help
+	  This driver supports the A5PSW switch, which is embedded in Renesas
+	  RZ/N1 SoC.
+
 config NET_DSA_SMSC_LAN9303
 	tristate
 	select NET_DSA_TAG_LAN9303

drivers/net/dsa/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
 obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
+obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o

drivers/net/dsa/rzn1_a5psw.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 Schneider Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_device.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <net/dsa.h>
+
+#define A5PSW_REVISION			0x0
+#define A5PSW_PORT_OFFSET(port)		(0x400 * (port))
+
+#define A5PSW_PORT_ENA			0x8
+#define A5PSW_PORT_ENA_RX_SHIFT		16
+#define A5PSW_PORT_ENA_TX_RX(port)	(BIT((port) + A5PSW_PORT_ENA_RX_SHIFT) | \
+					 BIT(port))
+#define A5PSW_UCAST_DEF_MASK		0xC
+
+#define A5PSW_VLAN_VERIFY		0x10
+#define A5PSW_VLAN_VERI_SHIFT		0
+#define A5PSW_VLAN_DISC_SHIFT		16
+
+#define A5PSW_BCAST_DEF_MASK		0x14
+#define A5PSW_MCAST_DEF_MASK		0x18
+
+#define A5PSW_INPUT_LEARN		0x1C
+#define A5PSW_INPUT_LEARN_DIS(p)	BIT((p) + 16)
+#define A5PSW_INPUT_LEARN_BLOCK(p)	BIT(p)
+
+#define A5PSW_MGMT_CFG			0x20
+#define A5PSW_MGMT_CFG_DISCARD		BIT(7)
+
+#define A5PSW_MODE_CFG			0x24
+#define A5PSW_MODE_STATS_RESET		BIT(31)
+
+#define A5PSW_VLAN_IN_MODE		0x28
+#define A5PSW_VLAN_IN_MODE_PORT_SHIFT(port)	((port) * 2)
+#define A5PSW_VLAN_IN_MODE_PORT(port)		(GENMASK(1, 0) << \
+					A5PSW_VLAN_IN_MODE_PORT_SHIFT(port))
+#define A5PSW_VLAN_IN_MODE_SINGLE_PASSTHROUGH	0x0
+#define A5PSW_VLAN_IN_MODE_SINGLE_REPLACE	0x1
+#define A5PSW_VLAN_IN_MODE_TAG_ALWAYS		0x2
+
+#define A5PSW_VLAN_OUT_MODE		0x2C
+#define A5PSW_VLAN_OUT_MODE_PORT(port)	(GENMASK(1, 0) << ((port) * 2))
+#define A5PSW_VLAN_OUT_MODE_DIS		0x0
+#define A5PSW_VLAN_OUT_MODE_STRIP	0x1
+#define A5PSW_VLAN_OUT_MODE_TAG_THROUGH	0x2
+#define A5PSW_VLAN_OUT_MODE_TRANSPARENT	0x3
+
+#define A5PSW_VLAN_IN_MODE_ENA		0x30
+#define A5PSW_VLAN_TAG_ID		0x34
+
+#define A5PSW_SYSTEM_TAGINFO(port)	(0x200 + A5PSW_PORT_OFFSET(port))
+
+#define A5PSW_AUTH_PORT(port)		(0x240 + 4 * (port))
+#define A5PSW_AUTH_PORT_AUTHORIZED	BIT(0)
+
+#define A5PSW_VLAN_RES(entry)		(0x280 + 4 * (entry))
+#define A5PSW_VLAN_RES_WR_PORTMASK	BIT(30)
+#define A5PSW_VLAN_RES_WR_TAGMASK	BIT(29)
+#define A5PSW_VLAN_RES_RD_TAGMASK	BIT(28)
+#define A5PSW_VLAN_RES_ID		GENMASK(16, 5)
+#define A5PSW_VLAN_RES_PORTMASK		GENMASK(4, 0)
+
+#define A5PSW_RXMATCH_CONFIG(port)	(0x3e80 + 4 * (port))
+#define A5PSW_RXMATCH_CONFIG_PATTERN(p)	BIT(p)
+
+#define A5PSW_PATTERN_CTRL(p)		(0x3eb0 + 4  * (p))
+#define A5PSW_PATTERN_CTRL_MGMTFWD	BIT(1)
+
+#define A5PSW_LK_CTRL		0x400
+#define A5PSW_LK_ADDR_CTRL_BLOCKING	BIT(0)
+#define A5PSW_LK_ADDR_CTRL_LEARNING	BIT(1)
+#define A5PSW_LK_ADDR_CTRL_AGEING	BIT(2)
+#define A5PSW_LK_ADDR_CTRL_ALLOW_MIGR	BIT(3)
+#define A5PSW_LK_ADDR_CTRL_CLEAR_TABLE	BIT(6)
+
+#define A5PSW_LK_ADDR_CTRL		0x408
+#define A5PSW_LK_ADDR_CTRL_BUSY		BIT(31)
+#define A5PSW_LK_ADDR_CTRL_DELETE_PORT	BIT(30)
+#define A5PSW_LK_ADDR_CTRL_CLEAR	BIT(29)
+#define A5PSW_LK_ADDR_CTRL_LOOKUP	BIT(28)
+#define A5PSW_LK_ADDR_CTRL_WAIT		BIT(27)
+#define A5PSW_LK_ADDR_CTRL_READ		BIT(26)
+#define A5PSW_LK_ADDR_CTRL_WRITE	BIT(25)
+#define A5PSW_LK_ADDR_CTRL_ADDRESS	GENMASK(12, 0)
+
+#define A5PSW_LK_DATA_LO		0x40C
+#define A5PSW_LK_DATA_HI		0x410
+#define A5PSW_LK_DATA_HI_VALID		BIT(16)
+#define A5PSW_LK_DATA_HI_PORT		BIT(16)
+
+#define A5PSW_LK_LEARNCOUNT		0x418
+#define A5PSW_LK_LEARNCOUNT_COUNT	GENMASK(13, 0)
+#define A5PSW_LK_LEARNCOUNT_MODE	GENMASK(31, 30)
+#define A5PSW_LK_LEARNCOUNT_MODE_SET	0x0
+#define A5PSW_LK_LEARNCOUNT_MODE_INC	0x1
+#define A5PSW_LK_LEARNCOUNT_MODE_DEC	0x2
+
+#define A5PSW_MGMT_TAG_CFG		0x480
+#define A5PSW_MGMT_TAG_CFG_TAGFIELD	GENMASK(31, 16)
+#define A5PSW_MGMT_TAG_CFG_ALL_FRAMES	BIT(1)
+#define A5PSW_MGMT_TAG_CFG_ENABLE	BIT(0)
+
+#define A5PSW_LK_AGETIME		0x41C
+#define A5PSW_LK_AGETIME_MASK		GENMASK(23, 0)
+
+#define A5PSW_MDIO_CFG_STATUS		0x700
+#define A5PSW_MDIO_CFG_STATUS_CLKDIV	GENMASK(15, 7)
+#define A5PSW_MDIO_CFG_STATUS_READERR	BIT(1)
+#define A5PSW_MDIO_CFG_STATUS_BUSY	BIT(0)
+
+#define A5PSW_MDIO_COMMAND		0x704
+/* Register is named TRAININIT in datasheet and should be set when reading */
+#define A5PSW_MDIO_COMMAND_READ		BIT(15)
+#define A5PSW_MDIO_COMMAND_PHY_ADDR	GENMASK(9, 5)
+#define A5PSW_MDIO_COMMAND_REG_ADDR	GENMASK(4, 0)
+
+#define A5PSW_MDIO_DATA			0x708
+#define A5PSW_MDIO_DATA_MASK		GENMASK(15, 0)
+
+#define A5PSW_CMD_CFG(port)		(0x808 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_CMD_CFG_CNTL_FRM_ENA	BIT(23)
+#define A5PSW_CMD_CFG_SW_RESET		BIT(13)
+#define A5PSW_CMD_CFG_TX_CRC_APPEND	BIT(11)
+#define A5PSW_CMD_CFG_HD_ENA		BIT(10)
+#define A5PSW_CMD_CFG_PAUSE_IGNORE	BIT(8)
+#define A5PSW_CMD_CFG_CRC_FWD		BIT(6)
+#define A5PSW_CMD_CFG_ETH_SPEED		BIT(3)
+#define A5PSW_CMD_CFG_RX_ENA		BIT(1)
+#define A5PSW_CMD_CFG_TX_ENA		BIT(0)
+
+#define A5PSW_FRM_LENGTH(port)		(0x814 + A5PSW_PORT_OFFSET(port))
+#define A5PSW_FRM_LENGTH_MASK		GENMASK(13, 0)
+
+#define A5PSW_STATUS(port)		(0x840 + A5PSW_PORT_OFFSET(port))
+
+#define A5PSW_STATS_HIWORD		0x900
+
+#define A5PSW_VLAN_TAG(prio, id)	(((prio) << 12) | (id))
+#define A5PSW_PORTS_NUM			5
+#define A5PSW_CPU_PORT			(A5PSW_PORTS_NUM - 1)
+#define A5PSW_MDIO_DEF_FREQ		2500000
+#define A5PSW_MDIO_TIMEOUT		100
+#define A5PSW_JUMBO_LEN			(10 * SZ_1K)
+#define A5PSW_MDIO_CLK_DIV_MIN		5
+#define A5PSW_TAG_LEN			8
+#define A5PSW_VLAN_COUNT		32
+
+/* Ensure enough space for 2 VLAN tags */
+#define A5PSW_EXTRA_MTU_LEN		(A5PSW_TAG_LEN + 8)
+#define A5PSW_MAX_MTU			(A5PSW_JUMBO_LEN - A5PSW_EXTRA_MTU_LEN)
+
+#define A5PSW_PATTERN_MGMTFWD		0
+
+#define A5PSW_LK_BUSY_USEC_POLL		10
+#define A5PSW_CTRL_TIMEOUT		1000
+#define A5PSW_TABLE_ENTRIES		8192
+
+/**
+ * struct a5psw - switch struct
+ * @base: Base address of the switch
+ * @hclk: hclk_switch clock
+ * @clk: clk_switch clock
+ * @dev: Device associated to the switch
+ * @mii_bus: MDIO bus struct
+ * @mdio_freq: MDIO bus frequency requested
+ * @pcs: Array of PCS connected to the switch ports (not for the CPU)
+ * @ds: DSA switch struct
+ * @lk_lock: Lock for the lookup table
+ * @reg_lock: Lock for register read-modify-write operation
+ * @bridged_ports: Mask of ports that are bridged and should be flooded
+ * @br_dev: Bridge net device
+ */
+struct a5psw {
+	void __iomem *base;
+	struct clk *hclk;
+	struct clk *clk;
+	struct device *dev;
+	struct mii_bus	*mii_bus;
+	struct phylink_pcs *pcs[A5PSW_PORTS_NUM - 1];
+	struct dsa_switch ds;
+	struct mutex lk_lock;
+	spinlock_t reg_lock;
+	u32 bridged_ports;
+	struct net_device *br_dev;
+};