Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
   Kaffeine (Fedora 16 Bugzilla #812895);
 - Fixes a mutex unlock at an error condition at drx-k;
 - Fix winbond-cir set mode;
 - mt9m032: Fix a compilation breakage with some random Kconfig;
 - mt9m032: fix two dead locks;
 - xc5000: don't require an special firmware (that won't be provided by
   the vendor) just because the xtal frequency is different;
 - V4L DocBook: fix some typos at multi-plane formats description.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
  [media] V4L: mt9m032: fix compilation breakage
  [media] V4L: DocBook: Fix typos in the multi-plane formats description
  [media] V4L: mt9m032: fix two dead-locks
  [media] rc-core: set mode for winbond-cir
  [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
  [media] dvb_frontend: Fix a regression when switching back to DVB-S

Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

drivers/media/common/tuners/xc5000.c

@@ -54,6 +54,7 @@ struct xc5000_priv {
 	struct list_head hybrid_tuner_instance_list;
 
 	u32 if_khz;
+	u32 xtal_khz;
 	u32 freq_hz;
 	u32 bandwidth;
 	u8  video_standard;
@@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
 	.size = 12401,
 };
 
-static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = {
-	.name = "dvb-fe-xc5000c-41.024.5-31875.fw",
-	.size = 16503,
+static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
+	.name = "dvb-fe-xc5000c-41.024.5.fw",
+	.size = 16497,
 };
 
 static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
@@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
 	case XC5000A:
 		return &xc5000a_1_6_114;
 	case XC5000C:
-		return &xc5000c_41_024_5_31875;
+		return &xc5000c_41_024_5;
 	}
 }
 
@@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
 	return found;
 }
 
+static int xc_set_xtal(struct dvb_frontend *fe)
+{
+	struct xc5000_priv *priv = fe->tuner_priv;
+	int ret = XC_RESULT_SUCCESS;
+
+	switch (priv->chip_id) {
+	default:
+	case XC5000A:
+		/* 32.000 MHz xtal is default */
+		break;
+	case XC5000C:
+		switch (priv->xtal_khz) {
+		default:
+		case 32000:
+			/* 32.000 MHz xtal is default */
+			break;
+		case 31875:
+			/* 31.875 MHz xtal configuration */
+			ret = xc_write_reg(priv, 0x000f, 0x8081);
+			break;
+		}
+		break;
+	}
+	return ret;
+}
 
 static int xc5000_fwupload(struct dvb_frontend *fe)
 {
@@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
 	} else {
 		printk(KERN_INFO "xc5000: firmware uploading...\n");
 		ret = xc_load_i2c_sequence(fe,  fw->data);
+		if (XC_RESULT_SUCCESS == ret)
+			ret = xc_set_xtal(fe);
 		printk(KERN_INFO "xc5000: firmware upload complete...\n");
 	}
 
@@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 		priv->if_khz = cfg->if_khz;
 	}
 
+	if (priv->xtal_khz == 0)
+		priv->xtal_khz = cfg->xtal_khz;
+
 	if (priv->radio_input == 0)
 		priv->radio_input = cfg->radio_input;
 

drivers/media/common/tuners/xc5000.h

@@ -34,6 +34,7 @@ struct xc5000_config {
 	u8   i2c_address;
 	u32  if_khz;
 	u8   radio_input;
+	u32  xtal_khz;
 
 	int chip_id;
 };

drivers/media/dvb/dvb-core/dvb_frontend.c

@@ -1446,6 +1446,28 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system)
 				__func__);
 			return -EINVAL;
 		}
+		/*
+		 * Get a delivery system that is compatible with DVBv3
+		 * NOTE: in order for this to work with softwares like Kaffeine that
+		 *	uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to
+		 *	DVB-S, drivers that support both should put the SYS_DVBS entry
+		 *	before the SYS_DVBS2, otherwise it won't switch back to DVB-S.
+		 *	The real fix is that userspace applications should not use DVBv3
+		 *	and not trust on calling FE_SET_FRONTEND to switch the delivery
+		 *	system.
+		 */
+		ncaps = 0;
+		while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) {
+			if (fe->ops.delsys[ncaps] == desired_system) {
+				delsys = desired_system;
+				break;
+			}
+			ncaps++;
+		}
+		if (delsys == SYS_UNDEFINED) {
+			dprintk("%s() Couldn't find a delivery system that matches %d\n",
+				__func__, desired_system);
+		}
 	} else {
 		/*
 		 * This is a DVBv5 call. So, it likely knows the supported
@@ -1494,9 +1516,10 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system)
 				__func__);
 			return -EINVAL;
 		}
-		c->delivery_system = delsys;
 	}
 
+	c->delivery_system = delsys;
+
 	/*
 	 * The DVBv3 or DVBv5 call is requesting a different system. So,
 	 * emulation is needed.

drivers/media/dvb/frontends/drxk_hard.c

@@ -1520,8 +1520,10 @@ static int scu_command(struct drxk_state *state,
 	dprintk(1, "\n");
 
 	if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) ||
-	    ((resultLen > 0) && (result == NULL)))
-		goto error;
+	    ((resultLen > 0) && (result == NULL))) {
+		printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__);
+		return status;
+	}
 
 	mutex_lock(&state->mutex);
 

drivers/media/rc/winbond-cir.c

@@ -1046,6 +1046,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 		goto exit_unregister_led;
 	}
 
+	data->dev->driver_type = RC_DRIVER_IR_RAW;
 	data->dev->driver_name = WBCIR_NAME;
 	data->dev->input_name = WBCIR_NAME;
 	data->dev->input_phys = "wbcir/cir0";

drivers/media/video/Kconfig

@@ -492,7 +492,7 @@ config VIDEO_VS6624
 
 config VIDEO_MT9M032
 	tristate "MT9M032 camera sensor support"
-	depends on I2C && VIDEO_V4L2
+	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	select VIDEO_APTINA_PLL
 	---help---
 	  This driver supports MT9M032 camera sensors from Aptina, monochrome

drivers/media/video/mt9m032.c

@@ -392,10 +392,11 @@ static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
 	}
 
 	/* Scaling is not supported, the format is thus fixed. */
-	ret = mt9m032_get_pad_format(subdev, fh, fmt);
+	fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which);
+	ret = 0;
 
 done:
-	mutex_lock(&sensor->lock);
+	mutex_unlock(&sensor->lock);
 	return ret;
 }