ARM: davinci: da850: add mmc DT entries

Add DT entry for MMC. Also add entry for pinmux information.
Tested:
1) Without GPIO card detection and EDMA support as DT support for
   GPIO and EDMA are yet come.
2) By creating/deleting files and mounting/unmounting the partition.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: cjb@laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/boot/dts/da850-evm.dts

@@ -43,6 +43,13 @@ tps: tps@48 {
 		wdt: wdt@1c21000 {
 			status = "okay";
 		};
+		mmc0: mmc@1c40000 {
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";

arch/arm/boot/dts/da850.dtsi

@@ -62,6 +62,15 @@ i2c0_pins: pinmux_i2c0_pins {
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
@@ -107,6 +116,12 @@ wdt: wdt@1c21000 {
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
+		mmc0: mmc@1c40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			interrupts = <16>;
+			status = "disabled";
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";