Commit 8911097f authored by Jakub Kicinski's avatar Jakub Kicinski

Merge tag 'wimax-staging' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Arnd Bergmann says:

====================
wimax: move to staging

After I sent a fix for what appeared to be a harmless warning in
the wimax user interface code, the conclusion was that the whole
thing has most likely not been used in a very long time, and the
user interface possibly been broken since b61a5eea ("wimax: use
genl_register_family_with_ops()").

Using a shared branch between net-next and staging should help
coordinate patches getting submitted against it.
====================
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents 72671b35 f54ec58f
...@@ -115,7 +115,6 @@ configure specific aspects of kernel behavior to your liking. ...@@ -115,7 +115,6 @@ configure specific aspects of kernel behavior to your liking.
unicode unicode
vga-softcursor vga-softcursor
video-output video-output
wimax/index
xfs xfs
.. only:: subproject and html .. only:: subproject and html
......
...@@ -83,27 +83,6 @@ SUN RPC subsystem ...@@ -83,27 +83,6 @@ SUN RPC subsystem
.. kernel-doc:: net/sunrpc/clnt.c .. kernel-doc:: net/sunrpc/clnt.c
:export: :export:
WiMAX
-----
.. kernel-doc:: net/wimax/op-msg.c
:export:
.. kernel-doc:: net/wimax/op-reset.c
:export:
.. kernel-doc:: net/wimax/op-rfkill.c
:export:
.. kernel-doc:: net/wimax/stack.c
:export:
.. kernel-doc:: include/net/wimax.h
:internal:
.. kernel-doc:: include/uapi/linux/wimax.h
:internal:
Network device support Network device support
====================== ======================
......
...@@ -114,7 +114,6 @@ Todolist: ...@@ -114,7 +114,6 @@ Todolist:
unicode unicode
vga-softcursor vga-softcursor
video-output video-output
wimax/index
xfs xfs
.. only:: subproject and html .. only:: subproject and html
......
...@@ -9106,16 +9106,6 @@ W: https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi ...@@ -9106,16 +9106,6 @@ W: https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
F: drivers/net/wireless/intel/iwlwifi/ F: drivers/net/wireless/intel/iwlwifi/
INTEL WIRELESS WIMAX CONNECTION 2400
M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org (subscribers-only)
S: Supported
W: http://linuxwimax.org
F: Documentation/admin-guide/wimax/i2400m.rst
F: drivers/net/wimax/i2400m/
F: include/uapi/linux/wimax/i2400m.h
INTEL WMI SLIM BOOTLOADER (SBL) FIRMWARE UPDATE DRIVER INTEL WMI SLIM BOOTLOADER (SBL) FIRMWARE UPDATE DRIVER
M: Jithu Joseph <jithu.joseph@intel.com> M: Jithu Joseph <jithu.joseph@intel.com>
R: Maurice Ma <maurice.ma@intel.com> R: Maurice Ma <maurice.ma@intel.com>
...@@ -18907,18 +18897,6 @@ S: Supported ...@@ -18907,18 +18897,6 @@ S: Supported
W: https://wireless.wiki.kernel.org/en/users/Drivers/wil6210 W: https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/ F: drivers/net/wireless/ath/wil6210/
WIMAX STACK
M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
M: linux-wimax@intel.com
L: wimax@linuxwimax.org (subscribers-only)
S: Supported
W: http://linuxwimax.org
F: Documentation/admin-guide/wimax/wimax.rst
F: include/linux/wimax/debug.h
F: include/net/wimax.h
F: include/uapi/linux/wimax.h
F: net/wimax/
WINBOND CIR DRIVER WINBOND CIR DRIVER
M: David Härdeman <david@hardeman.nu> M: David Härdeman <david@hardeman.nu>
S: Maintained S: Maintained
......
...@@ -489,8 +489,6 @@ source "drivers/net/usb/Kconfig" ...@@ -489,8 +489,6 @@ source "drivers/net/usb/Kconfig"
source "drivers/net/wireless/Kconfig" source "drivers/net/wireless/Kconfig"
source "drivers/net/wimax/Kconfig"
source "drivers/net/wan/Kconfig" source "drivers/net/wan/Kconfig"
source "drivers/net/ieee802154/Kconfig" source "drivers/net/ieee802154/Kconfig"
......
...@@ -66,7 +66,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o ...@@ -66,7 +66,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_WLAN) += wireless/ obj-$(CONFIG_WLAN) += wireless/
obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_IEEE802154) += ieee802154/ obj-$(CONFIG_IEEE802154) += ieee802154/
obj-$(CONFIG_VMXNET3) += vmxnet3/ obj-$(CONFIG_VMXNET3) += vmxnet3/
......
# SPDX-License-Identifier: GPL-2.0-only
#
# WiMAX LAN device drivers configuration
#
comment "Enable WiMAX (Networking options) to see the WiMAX drivers"
depends on WIMAX = n
if WIMAX
menu "WiMAX Wireless Broadband devices"
source "drivers/net/wimax/i2400m/Kconfig"
endmenu
endif
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_WIMAX_I2400M) += i2400m/
...@@ -114,6 +114,8 @@ source "drivers/staging/kpc2000/Kconfig" ...@@ -114,6 +114,8 @@ source "drivers/staging/kpc2000/Kconfig"
source "drivers/staging/qlge/Kconfig" source "drivers/staging/qlge/Kconfig"
source "drivers/staging/wimax/Kconfig"
source "drivers/staging/wfx/Kconfig" source "drivers/staging/wfx/Kconfig"
source "drivers/staging/hikey9xx/Kconfig" source "drivers/staging/hikey9xx/Kconfig"
......
...@@ -47,5 +47,6 @@ obj-$(CONFIG_XIL_AXIS_FIFO) += axis-fifo/ ...@@ -47,5 +47,6 @@ obj-$(CONFIG_XIL_AXIS_FIFO) += axis-fifo/
obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
obj-$(CONFIG_KPC2000) += kpc2000/ obj-$(CONFIG_KPC2000) += kpc2000/
obj-$(CONFIG_QLGE) += qlge/ obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_WFX) += wfx/ obj-$(CONFIG_WFX) += wfx/
obj-y += hikey9xx/ obj-y += hikey9xx/
...@@ -22,6 +22,8 @@ menuconfig WIMAX ...@@ -22,6 +22,8 @@ menuconfig WIMAX
If unsure, it is safe to select M (module). If unsure, it is safe to select M (module).
if WIMAX
config WIMAX_DEBUG_LEVEL config WIMAX_DEBUG_LEVEL
int "WiMAX debug level" int "WiMAX debug level"
depends on WIMAX depends on WIMAX
...@@ -38,3 +40,7 @@ config WIMAX_DEBUG_LEVEL ...@@ -38,3 +40,7 @@ config WIMAX_DEBUG_LEVEL
If set at zero, this will compile out all the debug code. If set at zero, this will compile out all the debug code.
It is recommended that it is left at 8. It is recommended that it is left at 8.
source "drivers/staging/wimax/i2400m/Kconfig"
endif
...@@ -11,3 +11,5 @@ wimax-y := \ ...@@ -11,3 +11,5 @@ wimax-y := \
stack.o stack.o
wimax-$(CONFIG_DEBUG_FS) += debugfs.o wimax-$(CONFIG_DEBUG_FS) += debugfs.o
obj-$(CONFIG_WIMAX_I2400M) += i2400m/
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether. As most
PCs and phones lack WiMAX hardware support, the remaining networks tend
to use standalone routers. These almost certainly run Linux, but not a
modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
#define D_MODULENAME wimax #define D_MODULENAME wimax
#define D_MASTER CONFIG_WIMAX_DEBUG_LEVEL #define D_MASTER CONFIG_WIMAX_DEBUG_LEVEL
#include <linux/wimax/debug.h> #include "linux-wimax-debug.h"
/* List of all the enabled modules */ /* List of all the enabled modules */
enum d_module { enum d_module {
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*/ */
#include <linux/debugfs.h> #include <linux/debugfs.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include "wimax-internal.h" #include "wimax-internal.h"
#define D_SUBMODULE debugfs #define D_SUBMODULE debugfs
......
...@@ -77,7 +77,7 @@ ...@@ -77,7 +77,7 @@
#include "i2400m.h" #include "i2400m.h"
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/wimax/i2400m.h> #include "linux-wimax-i2400m.h"
#include <linux/export.h> #include <linux/export.h>
#include <linux/moduleparam.h> #include <linux/moduleparam.h>
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
#define D_MODULENAME i2400m #define D_MODULENAME i2400m
#define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL #define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL
#include <linux/wimax/debug.h> #include "../linux-wimax-debug.h"
/* List of all the enabled modules */ /* List of all the enabled modules */
enum d_module { enum d_module {
......
...@@ -50,7 +50,7 @@ ...@@ -50,7 +50,7 @@
*/ */
#include "i2400m.h" #include "i2400m.h"
#include <linux/etherdevice.h> #include <linux/etherdevice.h>
#include <linux/wimax/i2400m.h> #include "linux-wimax-i2400m.h"
#include <linux/module.h> #include <linux/module.h>
#include <linux/moduleparam.h> #include <linux/moduleparam.h>
#include <linux/suspend.h> #include <linux/suspend.h>
......
...@@ -156,8 +156,8 @@ ...@@ -156,8 +156,8 @@
#include <linux/completion.h> #include <linux/completion.h>
#include <linux/rwsem.h> #include <linux/rwsem.h>
#include <linux/atomic.h> #include <linux/atomic.h>
#include <net/wimax.h> #include "../net-wimax.h"
#include <linux/wimax/i2400m.h> #include "linux-wimax-i2400m.h"
#include <asm/byteorder.h> #include <asm/byteorder.h>
enum { enum {
......
...@@ -18,7 +18,7 @@ ...@@ -18,7 +18,7 @@
* switch (coming from sysfs, the wimax stack or user space). * switch (coming from sysfs, the wimax stack or user space).
*/ */
#include "i2400m.h" #include "i2400m.h"
#include <linux/wimax/i2400m.h> #include "linux-wimax-i2400m.h"
#include <linux/slab.h> #include <linux/slab.h>
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
#define D_MODULENAME i2400m_usb #define D_MODULENAME i2400m_usb
#define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL #define D_MASTER CONFIG_WIMAX_I2400M_DEBUG_LEVEL
#include <linux/wimax/debug.h> #include "../linux-wimax-debug.h"
/* List of all the enabled modules */ /* List of all the enabled modules */
enum d_module { enum d_module {
......
...@@ -49,7 +49,7 @@ ...@@ -49,7 +49,7 @@
* usb_reset_device() * usb_reset_device()
*/ */
#include "i2400m-usb.h" #include "i2400m-usb.h"
#include <linux/wimax/i2400m.h> #include "linux-wimax-i2400m.h"
#include <linux/debugfs.h> #include <linux/debugfs.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/module.h> #include <linux/module.h>
......
...@@ -28,7 +28,7 @@ ...@@ -28,7 +28,7 @@
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include "wimax-internal.h" #include "wimax-internal.h"
......
...@@ -60,7 +60,7 @@ ...@@ -60,7 +60,7 @@
* #define D_MODULENAME modulename * #define D_MODULENAME modulename
* #define D_MASTER 10 * #define D_MASTER 10
* *
* #include <linux/wimax/debug.h> * #include "linux-wimax-debug.h"
* *
* enum d_module { * enum d_module {
* D_SUBMODULE_DECLARE(submodule_1), * D_SUBMODULE_DECLARE(submodule_1),
......
...@@ -236,7 +236,7 @@ ...@@ -236,7 +236,7 @@
#ifndef __NET__WIMAX_H__ #ifndef __NET__WIMAX_H__
#define __NET__WIMAX_H__ #define __NET__WIMAX_H__
#include <linux/wimax.h> #include "linux-wimax.h"
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
......
...@@ -60,7 +60,7 @@ ...@@ -60,7 +60,7 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include <linux/security.h> #include <linux/security.h>
#include <linux/export.h> #include <linux/export.h>
#include "wimax-internal.h" #include "wimax-internal.h"
......
...@@ -13,9 +13,9 @@ ...@@ -13,9 +13,9 @@
* disconnect and reconnect the device). * disconnect and reconnect the device).
*/ */
#include <net/wimax.h> #include "net-wimax.h"
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include <linux/security.h> #include <linux/security.h>
#include <linux/export.h> #include <linux/export.h>
#include "wimax-internal.h" #include "wimax-internal.h"
......
...@@ -45,9 +45,9 @@ ...@@ -45,9 +45,9 @@
* wimax_rfkill_rm() [called by wimax_dev_add/rm()] * wimax_rfkill_rm() [called by wimax_dev_add/rm()]
*/ */
#include <net/wimax.h> #include "net-wimax.h"
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include <linux/security.h> #include <linux/security.h>
#include <linux/rfkill.h> #include <linux/rfkill.h>
#include <linux/export.h> #include <linux/export.h>
......
...@@ -10,9 +10,9 @@ ...@@ -10,9 +10,9 @@
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*/ */
#include <net/wimax.h> #include "net-wimax.h"
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include <linux/security.h> #include <linux/security.h>
#include "wimax-internal.h" #include "wimax-internal.h"
......
...@@ -39,7 +39,7 @@ ...@@ -39,7 +39,7 @@
#include <linux/gfp.h> #include <linux/gfp.h>
#include <net/genetlink.h> #include <net/genetlink.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
#include <linux/wimax.h> #include "linux-wimax.h"
#include <linux/module.h> #include <linux/module.h>
#include "wimax-internal.h" #include "wimax-internal.h"
...@@ -388,17 +388,24 @@ void wimax_dev_init(struct wimax_dev *wimax_dev) ...@@ -388,17 +388,24 @@ void wimax_dev_init(struct wimax_dev *wimax_dev)
} }
EXPORT_SYMBOL_GPL(wimax_dev_init); EXPORT_SYMBOL_GPL(wimax_dev_init);
/*
* There are multiple enums reusing the same values, adding
* others is only possible if they use a compatible policy.
*/
static const struct nla_policy wimax_gnl_policy[WIMAX_GNL_ATTR_MAX + 1] = { static const struct nla_policy wimax_gnl_policy[WIMAX_GNL_ATTR_MAX + 1] = {
[WIMAX_GNL_RESET_IFIDX] = { .type = NLA_U32, }, /*
[WIMAX_GNL_RFKILL_IFIDX] = { .type = NLA_U32, }, * WIMAX_GNL_RESET_IFIDX, WIMAX_GNL_RFKILL_IFIDX,
[WIMAX_GNL_RFKILL_STATE] = { * WIMAX_GNL_STGET_IFIDX, WIMAX_GNL_MSG_IFIDX
.type = NLA_U32 /* enum wimax_rf_state */ */
}, [1] = { .type = NLA_U32, },
[WIMAX_GNL_STGET_IFIDX] = { .type = NLA_U32, }, /*
[WIMAX_GNL_MSG_IFIDX] = { .type = NLA_U32, }, * WIMAX_GNL_RFKILL_STATE, WIMAX_GNL_MSG_PIPE_NAME
[WIMAX_GNL_MSG_DATA] = { */
.type = NLA_UNSPEC, /* libnl doesn't grok BINARY yet */ [2] = { .type = NLA_U32, }, /* enum wimax_rf_state */
}, /*
* WIMAX_GNL_MSG_DATA
*/
[3] = { .type = NLA_UNSPEC, }, /* libnl doesn't grok BINARY yet */
}; };
static const struct genl_small_ops wimax_gnl_ops[] = { static const struct genl_small_ops wimax_gnl_ops[] = {
......
...@@ -22,7 +22,7 @@ ...@@ -22,7 +22,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/device.h> #include <linux/device.h>
#include <net/wimax.h> #include "net-wimax.h"
/* /*
......
...@@ -386,8 +386,6 @@ source "net/mac80211/Kconfig" ...@@ -386,8 +386,6 @@ source "net/mac80211/Kconfig"
endif # WIRELESS endif # WIRELESS
source "net/wimax/Kconfig"
source "net/rfkill/Kconfig" source "net/rfkill/Kconfig"
source "net/9p/Kconfig" source "net/9p/Kconfig"
source "net/caif/Kconfig" source "net/caif/Kconfig"
......
...@@ -66,7 +66,6 @@ obj-$(CONFIG_MAC802154) += mac802154/ ...@@ -66,7 +66,6 @@ obj-$(CONFIG_MAC802154) += mac802154/
ifeq ($(CONFIG_NET),y) ifeq ($(CONFIG_NET),y)
obj-$(CONFIG_SYSCTL) += sysctl_net.o obj-$(CONFIG_SYSCTL) += sysctl_net.o
endif endif
obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_DNS_RESOLVER) += dns_resolver/ obj-$(CONFIG_DNS_RESOLVER) += dns_resolver/
obj-$(CONFIG_CEPH_LIB) += ceph/ obj-$(CONFIG_CEPH_LIB) += ceph/
obj-$(CONFIG_BATMAN_ADV) += batman-adv/ obj-$(CONFIG_BATMAN_ADV) += batman-adv/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment