Commit 894b7382 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'irq-s3c24xx-for-v3.10' of...

Merge tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

s3c24xx irq cleanup and move into drivers/irqchip

* tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  irqchip: s3c24xx: add devicetree support
  irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
  irqchip: s3c24xx: globally keep track of the created intc instances
  irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
  irqchip: s3c24xx: fix irqlist of second s3c2416 controller
  irqchip: s3c24xx: fix comments on some camera interrupts
  ARM: S3C24XX: move irq driver to drivers/irqchip
  ARM: S3C24XX: add handle_irq function
  ARM: S3C24XX: make s3c24xx_init_intc static
  ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
  ARM: S3C24XX: fix irq parent check
  ARM: S3C24XX: fix redundant checks in the irq mapping function
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents ab9838e1 f0774d41
Samsung S3C24XX Interrupt Controllers
The S3C24XX SoCs contain a custom set of interrupt controllers providing a
varying number of interrupt sources. The set consists of a main- and sub-
controller and on newer SoCs even a second main controller.
Required properties:
- compatible: Compatible property value should be "samsung,s3c2410-irq"
for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
- reg: Physical base address of the controller and length of memory mapped
region.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 4 and interrupt descriptor shall
have the following format:
<ctrl_num parent_irq ctrl_irq type>
ctrl_num contains the controller to use:
- 0 ... main controller
- 1 ... sub controller
- 2 ... second main controller on s3c2416 and s3c2450
parent_irq contains the parent bit in the main controller and will be
ignored in main controllers
ctrl_irq contains the interrupt bit of the controller
type contains the trigger type to use
Example:
interrupt-controller@4a000000 {
compatible = "samsung,s3c2410-irq";
reg = <0x4a000000 0x100>;
interrupt-controller;
#interrupt-cells=<4>;
};
[...]
serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupt-parent = <&subintc>;
interrupts = <1 28 0 4>, <1 28 1 4>;
};
rtc@57000000 {
compatible = "samsung,s3c2410-rtc";
reg = <0x57000000 0x100>;
interrupt-parent = <&intc>;
interrupts = <0 30 0 3>, <0 8 0 3>;
};
......@@ -778,6 +778,7 @@ config ARCH_S3C24XX
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select MULTI_IRQ_HANDLER
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
......
......@@ -14,7 +14,7 @@ obj- :=
# core
obj-y += common.o irq.o
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
......
......@@ -21,6 +21,7 @@ extern void s3c2410_map_io(void);
extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2410_init_clocks(int xtal);
extern void s3c2410_restart(char mode, const char *cmd);
extern void s3c2410_init_irq(void);
#else
#define s3c2410_init_clocks NULL
#define s3c2410_init_uarts NULL
......
/*
* arch/arm/mach-s3c2410/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for S3C2410-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/* We have a problem that the INTOFFSET register does not always
* show one interrupt. Occasionally we get two interrupts through
* the prioritiser, and this causes the INTOFFSET register to show
* what looks like the logical-or of the two interrupt numbers.
*
* Thanks to Klaus, Shannon, et al for helping to debug this problem
*/
#define INTPND (0x10)
#define INTOFFSET (0x14)
#include <mach/hardware.h>
#include <asm/irq.h>
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #S3C24XX_VA_IRQ
@@ try the interrupt offset register, since it is there
ldr \irqstat, [\base, #INTPND ]
teq \irqstat, #0
beq 1002f
ldr \irqnr, [\base, #INTOFFSET ]
mov \tmp, #1
tst \irqstat, \tmp, lsl \irqnr
bne 1001f
@@ the number specified is not a valid irq, so try
@@ and work it out for ourselves
mov \irqnr, #0 @@ start here
@@ work out which irq (if any) we got
movs \tmp, \irqstat, lsl#16
addeq \irqnr, \irqnr, #16
moveq \irqstat, \irqstat, lsr#16
tst \irqstat, #0xff
addeq \irqnr, \irqnr, #8
moveq \irqstat, \irqstat, lsr#8
tst \irqstat, #0xf
addeq \irqnr, \irqnr, #4
moveq \irqstat, \irqstat, lsr#4
tst \irqstat, #0x3
addeq \irqnr, \irqnr, #2
moveq \irqstat, \irqstat, lsr#2
tst \irqstat, #0x1
addeq \irqnr, \irqnr, #1
@@ we have the value
1001:
adds \irqnr, \irqnr, #IRQ_EINT0
1002:
@@ exit here, Z flag unset if IRQ
.endm
......@@ -238,7 +238,7 @@ static void __init amlm5900_init(void)
MACHINE_START(AML_M5900, "AML_M5900")
.atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -605,7 +605,7 @@ MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -667,11 +667,6 @@ static void __init h1940_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
}
static void __init h1940_init(void)
{
u32 tmp;
......@@ -740,7 +735,7 @@ MACHINE_START(H1940, "IPAQ-H1940")
.atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -592,7 +592,7 @@ MACHINE_START(N30, "Acer-N30")
.atag_offset = 0x100,
.init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
......@@ -603,7 +603,7 @@ MACHINE_START(N35, "Acer-N35")
.atag_offset = 0x100,
.init_time = samsung_timer_init,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
......@@ -116,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -343,7 +343,7 @@ static void __init qt2410_machine_init(void)
MACHINE_START(QT2410, "QT2410")
.atag_offset = 0x100,
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -116,7 +116,7 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
/* Maintainer: Jonas Dietsche */
.atag_offset = 0x100,
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -149,7 +149,7 @@ static void __init tct_hammer_init(void)
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.atag_offset = 0x100,
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
......
......@@ -355,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
.init_irq = s3c2410_init_irq,
.init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
......@@ -183,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode,
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
......
......@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
......
......@@ -25,7 +25,11 @@
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <mach/regs-irq.h>
......@@ -35,6 +39,8 @@
#include <plat/regs-irqtype.h>
#include <plat/pm.h>
#include "irqchip.h"
#define S3C_IRQTYPE_NONE 0
#define S3C_IRQTYPE_EINT 1
#define S3C_IRQTYPE_EDGE 2
......@@ -42,6 +48,7 @@
struct s3c_irq_data {
unsigned int type;
unsigned long offset;
unsigned long parent_irq;
/* data gets filled during init */
......@@ -68,23 +75,34 @@ struct s3c_irq_intc {
struct s3c_irq_data *irqs;
};
/*
* Array holding pointers to the global controller structs
* [0] ... main_intc
* [1] ... sub_intc
* [2] ... main_intc2 on s3c2416
*/
static struct s3c_irq_intc *s3c_intc[3];
static void s3c_irq_mask(struct irq_data *data)
{
struct s3c_irq_intc *intc = data->domain->host_data;
struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *parent_intc = intc->parent;
struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
struct s3c_irq_data *parent_data;
unsigned long mask;
unsigned int irqno;
mask = __raw_readl(intc->reg_mask);
mask |= (1UL << data->hwirq);
mask |= (1UL << irq_data->offset);
__raw_writel(mask, intc->reg_mask);
if (parent_intc && irq_data->parent_irq) {
if (parent_intc) {
parent_data = &parent_intc->irqs[irq_data->parent_irq];
/* check to see if we need to mask the parent IRQ */
/* check to see if we need to mask the parent IRQ
* The parent_irq is always in main_intc, so the hwirq
* for find_mapping does not need an offset in any case.
*/
if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
irqno = irq_find_mapping(parent_intc->domain,
irq_data->parent_irq);
......@@ -95,17 +113,17 @@ static void s3c_irq_mask(struct irq_data *data)
static void s3c_irq_unmask(struct irq_data *data)
{
struct s3c_irq_intc *intc = data->domain->host_data;
struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *parent_intc = intc->parent;
struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
unsigned long mask;
unsigned int irqno;
mask = __raw_readl(intc->reg_mask);
mask &= ~(1UL << data->hwirq);
mask &= ~(1UL << irq_data->offset);
__raw_writel(mask, intc->reg_mask);
if (parent_intc && irq_data->parent_irq) {
if (parent_intc) {
irqno = irq_find_mapping(parent_intc->domain,
irq_data->parent_irq);
s3c_irq_unmask(irq_get_irq_data(irqno));
......@@ -114,14 +132,37 @@ static void s3c_irq_unmask(struct irq_data *data)
static inline void s3c_irq_ack(struct irq_data *data)
{
struct s3c_irq_intc *intc = data->domain->host_data;
unsigned long bitval = 1UL << data->hwirq;
struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
struct s3c_irq_intc *intc = irq_data->intc;
unsigned long bitval = 1UL << irq_data->offset;
__raw_writel(bitval, intc->reg_pending);
if (intc->reg_intpnd)
__raw_writel(bitval, intc->reg_intpnd);
}
static int s3c_irq_type(struct irq_data *data, unsigned int type)
{
switch (type) {
case IRQ_TYPE_NONE:
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_BOTH:
irq_set_handler(data->irq, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_LOW:
case IRQ_TYPE_LEVEL_HIGH:
irq_set_handler(data->irq, handle_level_irq);
break;
default:
pr_err("No such irq type %d", type);
return -EINVAL;
}
return 0;
}
static int s3c_irqext_type_set(void __iomem *gpcon_reg,
void __iomem *extint_reg,
unsigned long gpcon_offset,
......@@ -227,6 +268,7 @@ static struct irq_chip s3c_irq_chip = {
.irq_ack = s3c_irq_ack,
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
.irq_set_type = s3c_irq_type,
.irq_set_wake = s3c_irq_wake
};
......@@ -235,6 +277,7 @@ static struct irq_chip s3c_irq_level_chip = {
.irq_mask = s3c_irq_mask,
.irq_unmask = s3c_irq_unmask,
.irq_ack = s3c_irq_ack,
.irq_set_type = s3c_irq_type,
};
static struct irq_chip s3c_irqext_chip = {
......@@ -258,12 +301,19 @@ static struct irq_chip s3c_irq_eint0t4 = {
static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
struct s3c_irq_intc *intc = irq_data->intc;
struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
unsigned long src;
unsigned long msk;
unsigned int n;
unsigned int offset;
/* we're using individual domains for the non-dt case
* and one big domain for the dt case where the subintc
* starts at hwirq number 32.
*/
offset = (intc->domain->of_node) ? 32 : 0;
chained_irq_enter(chip, desc);
......@@ -276,12 +326,64 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
while (src) {
n = __ffs(src);
src &= ~(1 << n);
generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
irq = irq_find_mapping(sub_intc->domain, offset + n);
generic_handle_irq(irq);
}
chained_irq_exit(chip, desc);
}
static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
struct pt_regs *regs, int intc_offset)
{
int pnd;
int offset;
int irq;
pnd = __raw_readl(intc->reg_intpnd);
if (!pnd)
return false;
/* non-dt machines use individual domains */
if (!intc->domain->of_node)
intc_offset = 0;
/* We have a problem that the INTOFFSET register does not always
* show one interrupt. Occasionally we get two interrupts through
* the prioritiser, and this causes the INTOFFSET register to show
* what looks like the logical-or of the two interrupt numbers.
*
* Thanks to Klaus, Shannon, et al for helping to debug this problem
*/
offset = __raw_readl(intc->reg_intpnd + 4);
/* Find the bit manually, when the offset is wrong.
* The pending register only ever contains the one bit of the next
* interrupt to handle.
*/
if (!(pnd & (1 << offset)))
offset = __ffs(pnd);
irq = irq_find_mapping(intc->domain, intc_offset + offset);
handle_IRQ(irq, regs);
return true;
}
asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
{
do {
if (likely(s3c_intc[0]))
if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
continue;
if (s3c_intc[2])
if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
continue;
break;
} while (1);
}
#ifdef CONFIG_FIQ
/**
* s3c24xx_set_fiq - set the FIQ routing
......@@ -324,18 +426,11 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
struct s3c_irq_data *parent_irq_data;
unsigned int irqno;
if (!intc) {
pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
return -EINVAL;
}
if (!irq_data) {
pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
return -EINVAL;
}
/* attach controller pointer to irq_data */
irq_data->intc = intc;
irq_data->offset = hw;
parent_intc = intc->parent;
/* set handler and flags */
switch (irq_data->type) {
......@@ -345,7 +440,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
/* On the S3C2412, the EINT0to3 have a parent irq
* but need the s3c_irq_eint0t4 chip
*/
if (irq_data->parent_irq && (!soc_is_s3c2412() || hw >= 4))
if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
irq_set_chip_and_handler(virq, &s3c_irqext_chip,
handle_edge_irq);
else
......@@ -353,8 +448,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
handle_edge_irq);
break;
case S3C_IRQTYPE_EDGE:
if (irq_data->parent_irq ||
intc->reg_pending == S3C2416_SRCPND2)
if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_edge_irq);
else
......@@ -362,7 +456,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
handle_edge_irq);
break;
case S3C_IRQTYPE_LEVEL:
if (irq_data->parent_irq)
if (parent_intc)
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_level_irq);
else
......@@ -373,23 +467,19 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
return -EINVAL;
}
irq_set_chip_data(virq, irq_data);
set_irq_flags(virq, IRQF_VALID);
if (irq_data->parent_irq) {
parent_intc = intc->parent;
if (!parent_intc) {
pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
hw);
if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
if (irq_data->parent_irq > 31) {
pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
irq_data->parent_irq);
goto err;
}
parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
if (!irq_data) {
pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
hw);
goto err;
}
parent_irq_data->sub_intc = intc;
parent_irq_data->sub_bits |= (1UL << hw);
......@@ -444,7 +534,7 @@ static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
}
}
struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
struct s3c_irq_data *irq_data,
struct s3c_irq_intc *parent,
unsigned long address)
......@@ -518,6 +608,8 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
goto err;
}
set_handle_irq(s3c24xx_handle_irq);
return intc;
err:
......@@ -525,12 +617,35 @@ struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
return ERR_PTR(ret);
}
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
*/
static struct s3c_irq_data init_eint[32] = {
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
};
static struct s3c_irq_data init_base[32] = {
#ifdef CONFIG_CPU_S3C2410
static struct s3c_irq_data init_s3c2410base[32] = {
{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
......@@ -565,34 +680,7 @@ static struct s3c_irq_data init_base[32] = {
{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
};
static struct s3c_irq_data init_eint[32] = {
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
};
static struct s3c_irq_data init_subint[32] = {
static struct s3c_irq_data init_s3c2410subint[32] = {
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
......@@ -606,23 +694,24 @@ static struct s3c_irq_data init_subint[32] = {
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
};
void __init s3c24xx_init_irq(void)
void __init s3c2410_init_irq(void)
{
struct s3c_irq_intc *main_intc;
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
s3c_intc[0], 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
}
#endif
#ifdef CONFIG_CPU_S3C2412
static struct s3c_irq_data init_s3c2412base[32] = {
......@@ -707,22 +796,22 @@ static struct s3c_irq_data init_s3c2412subint[32] = {
void s3c2412_init_irq(void)
{
struct s3c_irq_intc *main_intc;
pr_info("S3C2412: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4);
s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
s3c_intc[0], 0x4a000018);
}
#endif
......@@ -796,35 +885,35 @@ static struct s3c_irq_data init_s3c2416subint[32] = {
static struct s3c_irq_data init_s3c2416_second[32] = {
{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
{ .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
{ .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
{ .type = S3C_IRQTYPE_NONE }, /* reserved */
{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
{ .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
};
void __init s3c2416_init_irq(void)
{
struct s3c_irq_intc *main_intc;
pr_info("S3C2416: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
s3c_intc[0], 0x4a000018);
s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
NULL, 0x4a000040);
}
#endif
......@@ -877,30 +966,30 @@ static struct s3c_irq_data init_s3c2440subint[32] = {
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
};
void __init s3c2440_init_irq(void)
{
struct s3c_irq_intc *main_intc;
pr_info("S3C2440: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
s3c_intc[0], 0x4a000018);
}
#endif
......@@ -952,28 +1041,28 @@ static struct s3c_irq_data init_s3c2442subint[32] = {
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
};
void __init s3c2442_init_irq(void)
{
struct s3c_irq_intc *main_intc;
pr_info("S3C2442: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
s3c_intc[0], 0x4a000018);
}
#endif
......@@ -1048,21 +1137,219 @@ static struct s3c_irq_data init_s3c2443subint[32] = {
void __init s3c2443_init_irq(void)
{
struct s3c_irq_intc *main_intc;
pr_info("S3C2443: IRQ Support\n");
#ifdef CONFIG_FIQ
init_FIQ(FIQ_START);
#endif
main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
if (IS_ERR(main_intc)) {
s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
0x4a000000);
if (IS_ERR(s3c_intc[0])) {
pr_err("irq: could not create main interrupt controller\n");
return;
}
s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
s3c_intc[0], 0x4a000018);
}
#endif
#ifdef CONFIG_OF
static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
unsigned int ctrl_num = hw / 32;
unsigned int intc_hw = hw % 32;
struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
struct s3c_irq_intc *parent_intc = intc->parent;
struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
/* attach controller pointer to irq_data */
irq_data->intc = intc;
irq_data->offset = intc_hw;
if (!parent_intc)
irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
else
irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
handle_edge_irq);
irq_set_chip_data(virq, irq_data);
set_irq_flags(virq, IRQF_VALID);
return 0;
}
/* Translate our of irq notation
* format: <ctrl_num ctrl_irq parent_irq type>
*/
static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
struct s3c_irq_intc *intc;
struct s3c_irq_intc *parent_intc;
struct s3c_irq_data *irq_data;
struct s3c_irq_data *parent_irq_data;
int irqno;
if (WARN_ON(intsize < 4))
return -EINVAL;
if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
pr_err("controller number %d invalid\n", intspec[0]);
return -EINVAL;
}
intc = s3c_intc[intspec[0]];
*out_hwirq = intspec[0] * 32 + intspec[2];
*out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
parent_intc = intc->parent;
if (parent_intc) {
irq_data = &intc->irqs[intspec[2]];
irq_data->parent_irq = intspec[1];
parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
parent_irq_data->sub_intc = intc;
parent_irq_data->sub_bits |= (1UL << intspec[2]);
/* parent_intc is always s3c_intc[0], so no offset */
irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
if (irqno < 0) {
pr_err("irq: could not map parent interrupt\n");
return irqno;
}
irq_set_chained_handler(irqno, s3c_irq_demux);
}
return 0;
}
static struct irq_domain_ops s3c24xx_irq_ops_of = {
.map = s3c24xx_irq_map_of,
.xlate = s3c24xx_irq_xlate_of,
};
struct s3c24xx_irq_of_ctrl {
char *name;
unsigned long offset;
struct s3c_irq_intc **handle;
struct s3c_irq_intc **parent;
struct irq_domain_ops *ops;
};
static int __init s3c_init_intc_of(struct device_node *np,
struct device_node *interrupt_parent,
struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
{
struct s3c_irq_intc *intc;
struct s3c24xx_irq_of_ctrl *ctrl;
struct irq_domain *domain;
void __iomem *reg_base;
int i;
reg_base = of_iomap(np, 0);
if (!reg_base) {
pr_err("irq-s3c24xx: could not map irq registers\n");
return -EINVAL;
}
domain = irq_domain_add_linear(np, num_ctrl * 32,
&s3c24xx_irq_ops_of, NULL);
if (!domain) {
pr_err("irq: could not create irq-domain\n");
return -EINVAL;
}
for (i = 0; i < num_ctrl; i++) {
ctrl = &s3c_ctrl[i];
pr_debug("irq: found controller %s\n", ctrl->name);
intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
if (!intc)
return -ENOMEM;
intc->domain = domain;
intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32,
GFP_KERNEL);
if (!intc->irqs) {
kfree(intc);
return -ENOMEM;
}
if (ctrl->parent) {
intc->reg_pending = reg_base + ctrl->offset;
intc->reg_mask = reg_base + ctrl->offset + 0x4;
if (*(ctrl->parent)) {
intc->parent = *(ctrl->parent);
} else {
pr_warn("irq: parent of %s missing\n",
ctrl->name);
kfree(intc->irqs);
kfree(intc);
continue;
}
} else {
intc->reg_pending = reg_base + ctrl->offset;
intc->reg_mask = reg_base + ctrl->offset + 0x08;
intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
}
s3c24xx_clear_intc(intc);
s3c_intc[i] = intc;
}
set_handle_irq(s3c24xx_handle_irq);
return 0;
}
static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
{
.name = "intc",
.offset = 0,
}, {
.name = "subintc",
.offset = 0x18,
.parent = &s3c_intc[0],
}
};
int __init s3c2410_init_intc_of(struct device_node *np,
struct device_node *interrupt_parent,
struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
{
return s3c_init_intc_of(np, interrupt_parent,
s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
}
IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
{
.name = "intc",
.offset = 0,
}, {
.name = "subintc",
.offset = 0x18,
.parent = &s3c_intc[0],
}, {
.name = "intc2",
.offset = 0x40,
}
};
int __init s3c2416_init_intc_of(struct device_node *np,
struct device_node *interrupt_parent,
struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl)
{
return s3c_init_intc_of(np, interrupt_parent,
s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
}
IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment