ARM: SAMSUNG: Add SAMSUNG_PM config option to select pm

This patch enables the selection of samsung pm related stuffs
when SAMSUNG_PM config is enabled and not just when generic PM
config is enabled. Power management for s3c64XX and s3c24XX
is enabled by default and for other platform depends on S5P_PM.
This patch also fixes the following compilation error's when compiling
a platform like exynos5440 which does not select pm stuffs.

arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys':
linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume'
linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume'
linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume'
linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume'
arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq':
linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake'
linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake'
arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq':
linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake'
linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake'
arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake':
linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow'
linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow'
arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter':
linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow'
linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow'
linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow'
linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow'
linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core'
linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint'
linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core'
make: *** [vmlinux] Error 1
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-exynos/Makefile

@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 

arch/arm/mach-exynos/common.h

@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/cpuidle.c

@@ -25,6 +25,7 @@
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #include "common.h"
 

arch/arm/plat-samsung/Kconfig

@@ -29,6 +29,13 @@ config PLAT_S5P
 	help
 	  Base platform code for Samsung's S5P series SoC.
 
+config SAMSUNG_PM
+	bool
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || S5P_PM)
+	default y
+	help
+	  Base platform power management code for samsung code
+
 if PLAT_SAMSUNG
 
 # boot configurations

arch/arm/plat-samsung/Makefile

@@ -51,7 +51,7 @@ obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 
 # PM support
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_SAMSUNG_PM)	+= pm.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 

arch/arm/plat-samsung/include/plat/pm.h

@@ -19,7 +19,7 @@
 
 struct device;
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
 
 extern __init int s3c_pm_init(void);
 extern __init int s3c64xx_pm_init(void);
@@ -58,8 +58,6 @@ extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
 
 /* from sleep.S */
 
-extern void s3c_cpu_resume(void);
-
 extern int s3c2410_cpu_suspend(unsigned long);
 
 /* sleep save info */
@@ -106,12 +104,14 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore(struct sleep_save *ptr, int count);
 extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_SAMSUNG_PM
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
+extern void s3c_cpu_resume(void);
 #else
 #define s3c_irq_wake NULL
 #define s3c_irqext_wake NULL
+#define s3c_cpu_resume NULL
 #endif
 
 /* PM debug functions */