wifi: mt76: mt7915: enable full system reset support

Add mt7915_reset() and refactor mt7915_mac_reset_work() to support
full system recovery.
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mt7915/init.c

@@ -262,8 +262,7 @@ static void mt7915_led_set_brightness(struct led_classdev *led_cdev,
 		mt7915_led_set_config(led_cdev, 0xff, 0);
 }
 
-static void
-mt7915_init_txpower(struct mt7915_dev *dev,
+void mt7915_init_txpower(struct mt7915_dev *dev,
 			 struct ieee80211_supported_band *sband)
 {
 	int i, n_chains = hweight8(dev->mphy.antenna_mask);
@@ -470,7 +469,7 @@ mt7915_mac_init_band(struct mt7915_dev *dev, u8 band)
 	mt76_rmw(dev, MT_WTBLOFF_TOP_RSCR(band), mask, set);
 }
 
-static void mt7915_mac_init(struct mt7915_dev *dev)
+void mt7915_mac_init(struct mt7915_dev *dev)
 {
 	int i;
 	u32 rx_len = is_mt7915(&dev->mt76) ? 0x400 : 0x680;
@@ -500,7 +499,7 @@ static void mt7915_mac_init(struct mt7915_dev *dev)
 	}
 }
 
-static int mt7915_txbf_init(struct mt7915_dev *dev)
+int mt7915_txbf_init(struct mt7915_dev *dev)
 {
 	int ret;
 
@@ -1141,6 +1140,8 @@ int mt7915_register_device(struct mt7915_dev *dev)
 			goto unreg_thermal;
 	}
 
+	dev->recovery.hw_init_done = true;
+
 	mt7915_init_debugfs(&dev->phy);
 
 	return 0;

drivers/net/wireless/mediatek/mt76/mt7915/mac.c

@@ -1291,7 +1291,7 @@ mt7915_wait_reset_state(struct mt7915_dev *dev, u32 state)
 	bool ret;
 
 	ret = wait_event_timeout(dev->reset_wait,
-				 (READ_ONCE(dev->reset_state) & state),
+				 (READ_ONCE(dev->recovery.state) & state),
 				 MT7915_RESET_TIMEOUT);
 
 	WARN(!ret, "Timeout waiting for MCU reset state %x\n", state);
@@ -1346,6 +1346,168 @@ void mt7915_tx_token_put(struct mt7915_dev *dev)
 	idr_destroy(&dev->mt76.token);
 }
 
+static int
+mt7915_mac_restart(struct mt7915_dev *dev)
+{
+	struct mt7915_phy *phy2;
+	struct mt76_phy *ext_phy;
+	struct mt76_dev *mdev = &dev->mt76;
+	int i, ret;
+
+	ext_phy = dev->mt76.phys[MT_BAND1];
+	phy2 = ext_phy ? ext_phy->priv : NULL;
+
+	if (dev->hif2) {
+		mt76_wr(dev, MT_INT1_MASK_CSR, 0x0);
+		mt76_wr(dev, MT_INT1_SOURCE_CSR, ~0);
+	}
+
+	if (dev_is_pci(mdev->dev)) {
+		mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0x0);
+		if (dev->hif2)
+			mt76_wr(dev, MT_PCIE1_MAC_INT_ENABLE, 0x0);
+	}
+
+	set_bit(MT76_RESET, &dev->mphy.state);
+	set_bit(MT76_MCU_RESET, &dev->mphy.state);
+	wake_up(&dev->mt76.mcu.wait);
+	if (ext_phy) {
+		set_bit(MT76_RESET, &ext_phy->state);
+		set_bit(MT76_MCU_RESET, &ext_phy->state);
+	}
+
+	/* lock/unlock all queues to ensure that no tx is pending */
+	mt76_txq_schedule_all(&dev->mphy);
+	if (ext_phy)
+		mt76_txq_schedule_all(ext_phy);
+
+	/* disable all tx/rx napi */
+	mt76_worker_disable(&dev->mt76.tx_worker);
+	mt76_for_each_q_rx(mdev, i) {
+		if (mdev->q_rx[i].ndesc)
+			napi_disable(&dev->mt76.napi[i]);
+	}
+	napi_disable(&dev->mt76.tx_napi);
+
+	/* token reinit */
+	mt7915_tx_token_put(dev);
+	idr_init(&dev->mt76.token);
+
+	mt7915_dma_reset(dev, true);
+
+	local_bh_disable();
+	mt76_for_each_q_rx(mdev, i) {
+		if (mdev->q_rx[i].ndesc) {
+			napi_enable(&dev->mt76.napi[i]);
+			napi_schedule(&dev->mt76.napi[i]);
+		}
+	}
+	local_bh_enable();
+	clear_bit(MT76_MCU_RESET, &dev->mphy.state);
+	clear_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
+
+	mt76_wr(dev, MT_INT_MASK_CSR, dev->mt76.mmio.irqmask);
+	mt76_wr(dev, MT_INT_SOURCE_CSR, ~0);
+
+	if (dev->hif2) {
+		mt76_wr(dev, MT_INT1_MASK_CSR, dev->mt76.mmio.irqmask);
+		mt76_wr(dev, MT_INT1_SOURCE_CSR, ~0);
+	}
+	if (dev_is_pci(mdev->dev)) {
+		mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+		if (dev->hif2)
+			mt76_wr(dev, MT_PCIE1_MAC_INT_ENABLE, 0xff);
+	}
+
+	/* load firmware */
+	ret = mt7915_mcu_init_firmware(dev);
+	if (ret)
+		goto out;
+
+	/* set the necessary init items */
+	ret = mt7915_mcu_set_eeprom(dev);
+	if (ret)
+		goto out;
+
+	mt7915_mac_init(dev);
+	mt7915_init_txpower(dev, &dev->mphy.sband_2g.sband);
+	mt7915_init_txpower(dev, &dev->mphy.sband_5g.sband);
+	ret = mt7915_txbf_init(dev);
+
+	if (test_bit(MT76_STATE_RUNNING, &dev->mphy.state)) {
+		ret = mt7915_run(dev->mphy.hw);
+		if (ret)
+			goto out;
+	}
+
+	if (ext_phy && test_bit(MT76_STATE_RUNNING, &ext_phy->state)) {
+		ret = mt7915_run(ext_phy->hw);
+		if (ret)
+			goto out;
+	}
+
+out:
+	/* reset done */
+	clear_bit(MT76_RESET, &dev->mphy.state);
+	if (phy2)
+		clear_bit(MT76_RESET, &phy2->mt76->state);
+
+	local_bh_disable();
+	napi_enable(&dev->mt76.tx_napi);
+	napi_schedule(&dev->mt76.tx_napi);
+	local_bh_enable();
+
+	mt76_worker_enable(&dev->mt76.tx_worker);
+
+	return ret;
+}
+
+static void
+mt7915_mac_full_reset(struct mt7915_dev *dev)
+{
+	struct mt76_phy *ext_phy;
+	int i;
+
+	ext_phy = dev->mt76.phys[MT_BAND1];
+
+	dev->recovery.hw_full_reset = true;
+
+	wake_up(&dev->mt76.mcu.wait);
+	ieee80211_stop_queues(mt76_hw(dev));
+	if (ext_phy)
+		ieee80211_stop_queues(ext_phy->hw);
+
+	cancel_delayed_work_sync(&dev->mphy.mac_work);
+	if (ext_phy)
+		cancel_delayed_work_sync(&ext_phy->mac_work);
+
+	mutex_lock(&dev->mt76.mutex);
+	for (i = 0; i < 10; i++) {
+		if (!mt7915_mac_restart(dev))
+			break;
+	}
+	mutex_unlock(&dev->mt76.mutex);
+
+	if (i == 10)
+		dev_err(dev->mt76.dev, "chip full reset failed\n");
+
+	ieee80211_restart_hw(mt76_hw(dev));
+	if (ext_phy)
+		ieee80211_restart_hw(ext_phy->hw);
+
+	ieee80211_wake_queues(mt76_hw(dev));
+	if (ext_phy)
+		ieee80211_wake_queues(ext_phy->hw);
+
+	dev->recovery.hw_full_reset = false;
+	ieee80211_queue_delayed_work(mt76_hw(dev), &dev->mphy.mac_work,
+				     MT7915_WATCHDOG_TIME);
+	if (ext_phy)
+		ieee80211_queue_delayed_work(ext_phy->hw,
+					     &ext_phy->mac_work,
+					     MT7915_WATCHDOG_TIME);
+}
+
 /* system error recovery */
 void mt7915_mac_reset_work(struct work_struct *work)
 {
@@ -1358,7 +1520,28 @@ void mt7915_mac_reset_work(struct work_struct *work)
 	ext_phy = dev->mt76.phys[MT_BAND1];
 	phy2 = ext_phy ? ext_phy->priv : NULL;
 
-	if (!(READ_ONCE(dev->reset_state) & MT_MCU_CMD_STOP_DMA))
+	/* chip full reset */
+	if (dev->recovery.restart) {
+		/* disable WA/WM WDT */
+		mt76_clear(dev, MT_WFDMA0_MCU_HOST_INT_ENA,
+			   MT_MCU_CMD_WDT_MASK);
+
+		mt7915_mac_full_reset(dev);
+
+		/* enable mcu irq */
+		mt7915_irq_enable(dev, MT_INT_MCU_CMD);
+		mt7915_irq_disable(dev, 0);
+
+		/* enable WA/WM WDT */
+		mt76_set(dev, MT_WFDMA0_MCU_HOST_INT_ENA, MT_MCU_CMD_WDT_MASK);
+
+		dev->recovery.state = MT_MCU_CMD_NORMAL_STATE;
+		dev->recovery.restart = false;
+		return;
+	}
+
+	/* chip partial reset */
+	if (!(READ_ONCE(dev->recovery.state) & MT_MCU_CMD_STOP_DMA))
 		return;
 
 	ieee80211_stop_queues(mt76_hw(dev));
@@ -1432,6 +1615,30 @@ void mt7915_mac_reset_work(struct work_struct *work)
 					     MT7915_WATCHDOG_TIME);
 }
 
+void mt7915_reset(struct mt7915_dev *dev)
+{
+	if (!dev->recovery.hw_init_done)
+		return;
+
+	if (dev->recovery.hw_full_reset)
+		return;
+
+	/* wm/wa exception: do full recovery */
+	if (READ_ONCE(dev->recovery.state) & MT_MCU_CMD_WDT_MASK) {
+		dev->recovery.restart = true;
+		dev_info(dev->mt76.dev,
+			 "%s indicated firmware crash, attempting recovery\n",
+			 wiphy_name(dev->mt76.hw->wiphy));
+
+		mt7915_irq_disable(dev, MT_INT_MCU_CMD);
+		queue_work(dev->mt76.wq, &dev->reset_work);
+		return;
+	}
+
+	queue_work(dev->mt76.wq, &dev->reset_work);
+	wake_up(&dev->reset_wait);
+}
+
 void mt7915_mac_update_stats(struct mt7915_phy *phy)
 {
 	struct mt7915_dev *dev = phy->dev;

drivers/net/wireless/mediatek/mt76/mt7915/main.c

@@ -20,17 +20,13 @@ static bool mt7915_dev_running(struct mt7915_dev *dev)
 	return phy && test_bit(MT76_STATE_RUNNING, &phy->mt76->state);
 }
 
-static int mt7915_start(struct ieee80211_hw *hw)
+int mt7915_run(struct ieee80211_hw *hw)
 {
 	struct mt7915_dev *dev = mt7915_hw_dev(hw);
 	struct mt7915_phy *phy = mt7915_hw_phy(hw);
 	bool running;
 	int ret;
 
-	flush_work(&dev->init_work);
-
-	mutex_lock(&dev->mt76.mutex);
-
 	running = mt7915_dev_running(dev);
 
 	if (!running) {
@@ -80,6 +76,18 @@ static int mt7915_start(struct ieee80211_hw *hw)
 		mt7915_mac_reset_counters(phy);
 
 out:
+	return ret;
+}
+
+static int mt7915_start(struct ieee80211_hw *hw)
+{
+	struct mt7915_dev *dev = mt7915_hw_dev(hw);
+	int ret;
+
+	flush_work(&dev->init_work);
+
+	mutex_lock(&dev->mt76.mutex);
+	ret = mt7915_run(hw);
 	mutex_unlock(&dev->mt76.mutex);
 
 	return ret;

drivers/net/wireless/mediatek/mt76/mt7915/mcu.c

@@ -2249,18 +2249,10 @@ mt7915_mcu_init_rx_airtime(struct mt7915_dev *dev)
 				 sizeof(req), true);
 }
 
-int mt7915_mcu_init(struct mt7915_dev *dev)
+int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
 {
-	static const struct mt76_mcu_ops mt7915_mcu_ops = {
-		.headroom = sizeof(struct mt76_connac2_mcu_txd),
-		.mcu_skb_send_msg = mt7915_mcu_send_message,
-		.mcu_parse_response = mt7915_mcu_parse_response,
-		.mcu_restart = mt76_connac_mcu_restart,
-	};
 	int ret;
 
-	dev->mt76.mcu_ops = &mt7915_mcu_ops;
-
 	/* force firmware operation mode into normal state,
 	 * which should be set before firmware download stage.
 	 */
@@ -2309,6 +2301,20 @@ int mt7915_mcu_init(struct mt7915_dev *dev)
 				 MCU_WA_PARAM_RED, 0, 0);
 }
 
+int mt7915_mcu_init(struct mt7915_dev *dev)
+{
+	static const struct mt76_mcu_ops mt7915_mcu_ops = {
+		.headroom = sizeof(struct mt76_connac2_mcu_txd),
+		.mcu_skb_send_msg = mt7915_mcu_send_message,
+		.mcu_parse_response = mt7915_mcu_parse_response,
+		.mcu_restart = mt76_connac_mcu_restart,
+	};
+
+	dev->mt76.mcu_ops = &mt7915_mcu_ops;
+
+	return mt7915_mcu_init_firmware(dev);
+}
+
 void mt7915_mcu_exit(struct mt7915_dev *dev)
 {
 	__mt76_mcu_restart(&dev->mt76);

drivers/net/wireless/mediatek/mt76/mt7915/mmio.c

@@ -746,10 +746,9 @@ static void mt7915_irq_tasklet(struct tasklet_struct *t)
 		u32 val = mt76_rr(dev, MT_MCU_CMD);
 
 		mt76_wr(dev, MT_MCU_CMD, val);
-		if (val & MT_MCU_CMD_ERROR_MASK) {
-			dev->reset_state = val;
-			queue_work(dev->mt76.wq, &dev->reset_work);
-			wake_up(&dev->reset_wait);
+		if (val & (MT_MCU_CMD_ERROR_MASK | MT_MCU_CMD_WDT_MASK)) {
+			dev->recovery.state = val;
+			mt7915_reset(dev);
 		}
 	}
 }

drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h

@@ -307,7 +307,13 @@ struct mt7915_dev {
 	struct work_struct rc_work;
 	struct work_struct reset_work;
 	wait_queue_head_t reset_wait;
-	u32 reset_state;
+
+	struct {
+		u32 state;
+		bool hw_full_reset:1;
+		bool hw_init_done:1;
+		bool restart:1;
+	} recovery;
 
 	struct list_head sta_rc_list;
 	struct list_head sta_poll_list;
@@ -448,7 +454,13 @@ int mt7915_dma_init(struct mt7915_dev *dev, struct mt7915_phy *phy2);
 void mt7915_dma_prefetch(struct mt7915_dev *dev);
 void mt7915_dma_cleanup(struct mt7915_dev *dev);
 int mt7915_dma_reset(struct mt7915_dev *dev, bool force);
+int mt7915_txbf_init(struct mt7915_dev *dev);
+void mt7915_init_txpower(struct mt7915_dev *dev,
+			 struct ieee80211_supported_band *sband);
+void mt7915_reset(struct mt7915_dev *dev);
+int mt7915_run(struct ieee80211_hw *hw);
 int mt7915_mcu_init(struct mt7915_dev *dev);
+int mt7915_mcu_init_firmware(struct mt7915_dev *dev);
 int mt7915_mcu_twt_agrt_update(struct mt7915_dev *dev,
 			       struct mt7915_vif *mvif,
 			       struct mt7915_twt_flow *flow,
@@ -548,6 +560,7 @@ static inline void mt7915_irq_disable(struct mt7915_dev *dev, u32 mask)
 		mt76_set_irq_mask(&dev->mt76, MT_INT_MASK_CSR, mask, 0);
 }
 
+void mt7915_mac_init(struct mt7915_dev *dev);
 u32 mt7915_mac_wtbl_lmac_addr(struct mt7915_dev *dev, u16 wcid, u8 dw);
 bool mt7915_mac_wtbl_update(struct mt7915_dev *dev, int idx, u32 mask);
 void mt7915_mac_reset_counters(struct mt7915_phy *phy);

drivers/net/wireless/mediatek/mt76/mt7915/regs.h

@@ -563,6 +563,8 @@ enum offs_rev {
 #define MT_WFDMA0_BUSY_ENA_TX_FIFO1	BIT(1)
 #define MT_WFDMA0_BUSY_ENA_RX_FIFO	BIT(2)
 
+#define MT_WFDMA0_MCU_HOST_INT_ENA	MT_WFDMA0(0x1f4)
+
 #define MT_WFDMA0_GLO_CFG		MT_WFDMA0(0x208)
 #define MT_WFDMA0_GLO_CFG_TX_DMA_EN	BIT(0)
 #define MT_WFDMA0_GLO_CFG_RX_DMA_EN	BIT(2)
@@ -731,6 +733,8 @@ enum offs_rev {
 #define MT_MCU_CMD_NORMAL_STATE		BIT(5)
 #define MT_MCU_CMD_ERROR_MASK		GENMASK(5, 1)
 
+#define MT_MCU_CMD_WDT_MASK		GENMASK(31, 30)
+
 /* TOP RGU */
 #define MT_TOP_RGU_BASE			0x18000000
 #define MT_TOP_PWR_CTRL			(MT_TOP_RGU_BASE + (0x0))