x86/xen/64: Rearrange the SYSCALL entries

Xen's raw SYSCALL entries are much less weird than native.  Rather
than fudging them to look like native entries, use the Xen-provided
stack frame directly.

This lets us eliminate entry_SYSCALL_64_after_swapgs and two uses of
the SWAPGS_UNSAFE_STACK paravirt hook.  The SYSENTER code would
benefit from similar treatment.

This makes one change to the native code path: the compat
instruction that clears the high 32 bits of %rax is moved slightly
later.  I'd be surprised if this affects performance at all.
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/7c88ed36805d36841ab03ec3b48b4122c4418d71.1502164668.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/entry/entry_64.S

@@ -142,14 +142,8 @@ ENTRY(entry_SYSCALL_64)
 	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
 	 * it is too small to ever cause noticeable irq latency.
 	 */
-	SWAPGS_UNSAFE_STACK
-	/*
-	 * A hypervisor implementation might want to use a label
-	 * after the swapgs, so that it can do the swapgs
-	 * for the guest and jump here on syscall.
-	 */
-GLOBAL(entry_SYSCALL_64_after_swapgs)
 
+	swapgs
 	movq	%rsp, PER_CPU_VAR(rsp_scratch)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
@@ -161,6 +155,7 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
 	pushq	%r11				/* pt_regs->flags */
 	pushq	$__USER_CS			/* pt_regs->cs */
 	pushq	%rcx				/* pt_regs->ip */
+GLOBAL(entry_SYSCALL_64_after_hwframe)
 	pushq	%rax				/* pt_regs->orig_ax */
 	pushq	%rdi				/* pt_regs->di */
 	pushq	%rsi				/* pt_regs->si */

arch/x86/entry/entry_64_compat.S

@@ -183,21 +183,20 @@ ENDPROC(entry_SYSENTER_compat)
  */
 ENTRY(entry_SYSCALL_compat)
 	/* Interrupts are off on entry. */
-	SWAPGS_UNSAFE_STACK
+	swapgs
 
 	/* Stash user ESP and switch to the kernel stack. */
 	movl	%esp, %r8d
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%eax, %eax
-
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER32_DS		/* pt_regs->ss */
 	pushq	%r8			/* pt_regs->sp */
 	pushq	%r11			/* pt_regs->flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	pushq	%rcx			/* pt_regs->ip */
+GLOBAL(entry_SYSCALL_compat_after_hwframe)
+	movl	%eax, %eax		/* discard orig_ax high bits */
 	pushq	%rax			/* pt_regs->orig_ax */
 	pushq	%rdi			/* pt_regs->di */
 	pushq	%rsi			/* pt_regs->si */

arch/x86/xen/xen-asm_64.S

@@ -82,34 +82,29 @@ RELOC(xen_sysret64, 1b+1)
  *	rip
  *	r11
  * rsp->rcx
- *
- * In all the entrypoints, we undo all that to make it look like a
- * CPU-generated syscall/sysenter and jump to the normal entrypoint.
  */
 
-.macro undo_xen_syscall
-	mov 0*8(%rsp), %rcx
-	mov 1*8(%rsp), %r11
-	mov 5*8(%rsp), %rsp
-.endm
-
 /* Normal 64-bit system call target */
 ENTRY(xen_syscall_target)
-	undo_xen_syscall
-	jmp entry_SYSCALL_64_after_swapgs
+	popq %rcx
+	popq %r11
+	jmp entry_SYSCALL_64_after_hwframe
 ENDPROC(xen_syscall_target)
 
 #ifdef CONFIG_IA32_EMULATION
 
 /* 32-bit compat syscall target */
 ENTRY(xen_syscall32_target)
-	undo_xen_syscall
-	jmp entry_SYSCALL_compat
+	popq %rcx
+	popq %r11
+	jmp entry_SYSCALL_compat_after_hwframe
 ENDPROC(xen_syscall32_target)
 
 /* 32-bit compat sysenter target */
 ENTRY(xen_sysenter_target)
-	undo_xen_syscall
+	mov 0*8(%rsp), %rcx
+	mov 1*8(%rsp), %r11
+	mov 5*8(%rsp), %rsp
 	jmp entry_SYSENTER_compat
 ENDPROC(xen_sysenter_target)