From 8aa80fc8bdf229fa772c9bfdff96920da8db784f Mon Sep 17 00:00:00 2001
From: Claudiu Manoil <claudiu.manoil@nxp.com>
Date: Sun, 23 Feb 2020 22:47:16 +0200
Subject: [PATCH] arm64: dts: ls1028a: enable switch PHYs on RDB
Link the switch PHY nodes to the central MDIO controller PCIe endpoint
node on LS1028A (implemented as PF3) so that PHYs are accessible via
MDIO.
Enable SGMII AN on the Felix PCS by telling PHYLINK that the VSC8514
quad PHY is capable of in-band-status.
The PHYs are used in poll mode due to an issue with the interrupt line
on current revisions of the LS1028A-RDB board.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 14efe3b06042..6d05b76c2c7a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -177,6 +177,25 @@ &duart1 {
status = "okay";
};
+&enetc_mdio_pf3 {
+ /* VSC8514 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ qsgmii_phy1: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ qsgmii_phy2: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+
+ qsgmii_phy3: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
&enetc_port0 {
phy-handle = <&sgmii_phy0>;
phy-connection-type = "sgmii";
@@ -191,6 +210,47 @@ sgmii_phy0: ethernet-phy@2 {
};
};
+&enetc_port2 {
+ status = "okay";
+};
+
+&mscc_felix_port0 {
+ label = "swp0";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy0>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port1 {
+ label = "swp1";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy1>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port2 {
+ label = "swp2";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy2>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port3 {
+ label = "swp3";
+ managed = "in-band-status";
+ phy-handle = <&qsgmii_phy3>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
+ status = "okay";
+};
+
&sai4 {
status = "okay";
};
--
2.30.9