Commit 8aaa7278 authored by Sergey Ryazanov's avatar Sergey Ryazanov Committed by Ralf Baechle

MIPS: ath25: add early printk support

Signed-off-by: default avatarSergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8241/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 1753e74e
...@@ -107,6 +107,7 @@ config ATH25 ...@@ -107,6 +107,7 @@ config ATH25
select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL
select SYS_HAS_EARLY_PRINTK
help help
Support for Atheros AR231x and Atheros AR531x based boards Support for Atheros AR231x and Atheros AR531x based boards
......
...@@ -10,5 +10,7 @@ ...@@ -10,5 +10,7 @@
obj-y += board.o prom.o devices.o obj-y += board.o prom.o devices.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SOC_AR5312) += ar5312.o obj-$(CONFIG_SOC_AR5312) += ar5312.o
obj-$(CONFIG_SOC_AR2315) += ar2315.o obj-$(CONFIG_SOC_AR2315) += ar2315.o
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
*/
#include <linux/mm.h>
#include <linux/io.h>
#include <linux/serial_reg.h>
#include "devices.h"
#include "ar2315_regs.h"
#include "ar5312_regs.h"
static inline void prom_uart_wr(void __iomem *base, unsigned reg,
unsigned char ch)
{
__raw_writel(ch, base + 4 * reg);
}
static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
{
return __raw_readl(base + 4 * reg);
}
void prom_putchar(unsigned char ch)
{
static void __iomem *base;
if (unlikely(base == NULL)) {
if (is_ar2315())
base = (void __iomem *)(KSEG1ADDR(AR2315_UART0_BASE));
else
base = (void __iomem *)(KSEG1ADDR(AR5312_UART0_BASE));
}
while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
;
prom_uart_wr(base, UART_TX, ch);
while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment