Commit 8abbffd2 authored by Arseniy Krasnov's avatar Arseniy Krasnov Committed by Paolo Abeni

test/vsock: vsock_perf utility

This adds utility to check vsock rx/tx performance.

Usage as sender:
./vsock_perf --sender <cid> --port <port> --bytes <bytes to send>
Usage as receiver:
./vsock_perf --port <port> --rcvlowat <SO_RCVLOWAT>
Signed-off-by: default avatarArseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: default avatarStefano Garzarella <sgarzare@redhat.com>
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parent 685a21c3
# SPDX-License-Identifier: GPL-2.0-only
all: test
all: test vsock_perf
test: vsock_test vsock_diag_test
vsock_test: vsock_test.o timeout.o control.o util.o
vsock_diag_test: vsock_diag_test.o timeout.o control.o util.o
vsock_perf: vsock_perf.o
CFLAGS += -g -O2 -Werror -Wall -I. -I../../include -I../../../usr/include -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -D_GNU_SOURCE
.PHONY: all test clean
......
......@@ -35,3 +35,37 @@ Invoke test binaries in both directions as follows:
--control-port=$GUEST_IP \
--control-port=1234 \
--peer-cid=3
vsock_perf utility
-------------------
'vsock_perf' is a simple tool to measure vsock performance. It works in
sender/receiver modes: sender connect to peer at the specified port and
starts data transmission to the receiver. After data processing is done,
it prints several metrics(see below).
Usage:
# run as sender
# connect to CID 2, port 1234, send 1G of data, tx buf size is 1M
./vsock_perf --sender 2 --port 1234 --bytes 1G --buf-size 1M
Output:
tx performance: A Gbits/s
Output explanation:
A is calculated as "number of bits to send" / "time in tx loop"
# run as receiver
# listen port 1234, rx buf size is 1M, socket buf size is 1G, SO_RCVLOWAT is 64K
./vsock_perf --port 1234 --buf-size 1M --vsk-size 1G --rcvlowat 64K
Output:
rx performance: A Gbits/s
total in 'read()': B sec
POLLIN wakeups: C
average in 'read()': D ns
Output explanation:
A is calculated as "number of received bits" / "time in rx loop".
B is time, spent in 'read()' system call(excluding 'poll()')
C is number of 'poll()' wake ups with POLLIN bit set.
D is B / C, e.g. average amount of time, spent in single 'read()'.
// SPDX-License-Identifier: GPL-2.0-only
/*
* vsock_perf - benchmark utility for vsock.
*
* Copyright (C) 2022 SberDevices.
*
* Author: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
*/
#include <getopt.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <time.h>
#include <stdint.h>
#include <poll.h>
#include <sys/socket.h>
#include <linux/vm_sockets.h>
#define DEFAULT_BUF_SIZE_BYTES (128 * 1024)
#define DEFAULT_TO_SEND_BYTES (64 * 1024)
#define DEFAULT_VSOCK_BUF_BYTES (256 * 1024)
#define DEFAULT_RCVLOWAT_BYTES 1
#define DEFAULT_PORT 1234
#define BYTES_PER_GB (1024 * 1024 * 1024ULL)
#define NSEC_PER_SEC (1000000000ULL)
static unsigned int port = DEFAULT_PORT;
static unsigned long buf_size_bytes = DEFAULT_BUF_SIZE_BYTES;
static unsigned long vsock_buf_bytes = DEFAULT_VSOCK_BUF_BYTES;
static void error(const char *s)
{
perror(s);
exit(EXIT_FAILURE);
}
static time_t current_nsec(void)
{
struct timespec ts;
if (clock_gettime(CLOCK_REALTIME, &ts))
error("clock_gettime");
return (ts.tv_sec * NSEC_PER_SEC) + ts.tv_nsec;
}
/* From lib/cmdline.c. */
static unsigned long memparse(const char *ptr)
{
char *endptr;
unsigned long long ret = strtoull(ptr, &endptr, 0);
switch (*endptr) {
case 'E':
case 'e':
ret <<= 10;
case 'P':
case 'p':
ret <<= 10;
case 'T':
case 't':
ret <<= 10;
case 'G':
case 'g':
ret <<= 10;
case 'M':
case 'm':
ret <<= 10;
case 'K':
case 'k':
ret <<= 10;
endptr++;
default:
break;
}
return ret;
}
static void vsock_increase_buf_size(int fd)
{
if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_MAX_SIZE,
&vsock_buf_bytes, sizeof(vsock_buf_bytes)))
error("setsockopt(SO_VM_SOCKETS_BUFFER_MAX_SIZE)");
if (setsockopt(fd, AF_VSOCK, SO_VM_SOCKETS_BUFFER_SIZE,
&vsock_buf_bytes, sizeof(vsock_buf_bytes)))
error("setsockopt(SO_VM_SOCKETS_BUFFER_SIZE)");
}
static int vsock_connect(unsigned int cid, unsigned int port)
{
union {
struct sockaddr sa;
struct sockaddr_vm svm;
} addr = {
.svm = {
.svm_family = AF_VSOCK,
.svm_port = port,
.svm_cid = cid,
},
};
int fd;
fd = socket(AF_VSOCK, SOCK_STREAM, 0);
if (fd < 0) {
perror("socket");
return -1;
}
if (connect(fd, &addr.sa, sizeof(addr.svm)) < 0) {
perror("connect");
close(fd);
return -1;
}
return fd;
}
static float get_gbps(unsigned long bits, time_t ns_delta)
{
return ((float)bits / 1000000000ULL) /
((float)ns_delta / NSEC_PER_SEC);
}
static void run_receiver(unsigned long rcvlowat_bytes)
{
unsigned int read_cnt;
time_t rx_begin_ns;
time_t in_read_ns;
size_t total_recv;
int client_fd;
char *data;
int fd;
union {
struct sockaddr sa;
struct sockaddr_vm svm;
} addr = {
.svm = {
.svm_family = AF_VSOCK,
.svm_port = port,
.svm_cid = VMADDR_CID_ANY,
},
};
union {
struct sockaddr sa;
struct sockaddr_vm svm;
} clientaddr;
socklen_t clientaddr_len = sizeof(clientaddr.svm);
printf("Run as receiver\n");
printf("Listen port %u\n", port);
printf("RX buffer %lu bytes\n", buf_size_bytes);
printf("vsock buffer %lu bytes\n", vsock_buf_bytes);
printf("SO_RCVLOWAT %lu bytes\n", rcvlowat_bytes);
fd = socket(AF_VSOCK, SOCK_STREAM, 0);
if (fd < 0)
error("socket");
if (bind(fd, &addr.sa, sizeof(addr.svm)) < 0)
error("bind");
if (listen(fd, 1) < 0)
error("listen");
client_fd = accept(fd, &clientaddr.sa, &clientaddr_len);
if (client_fd < 0)
error("accept");
vsock_increase_buf_size(client_fd);
if (setsockopt(client_fd, SOL_SOCKET, SO_RCVLOWAT,
&rcvlowat_bytes,
sizeof(rcvlowat_bytes)))
error("setsockopt(SO_RCVLOWAT)");
data = malloc(buf_size_bytes);
if (!data) {
fprintf(stderr, "'malloc()' failed\n");
exit(EXIT_FAILURE);
}
read_cnt = 0;
in_read_ns = 0;
total_recv = 0;
rx_begin_ns = current_nsec();
while (1) {
struct pollfd fds = { 0 };
fds.fd = client_fd;
fds.events = POLLIN | POLLERR |
POLLHUP | POLLRDHUP;
if (poll(&fds, 1, -1) < 0)
error("poll");
if (fds.revents & POLLERR) {
fprintf(stderr, "'poll()' error\n");
exit(EXIT_FAILURE);
}
if (fds.revents & POLLIN) {
ssize_t bytes_read;
time_t t;
t = current_nsec();
bytes_read = read(fds.fd, data, buf_size_bytes);
in_read_ns += (current_nsec() - t);
read_cnt++;
if (!bytes_read)
break;
if (bytes_read < 0) {
perror("read");
exit(EXIT_FAILURE);
}
total_recv += bytes_read;
}
if (fds.revents & (POLLHUP | POLLRDHUP))
break;
}
printf("total bytes received: %zu\n", total_recv);
printf("rx performance: %f Gbits/s\n",
get_gbps(total_recv * 8, current_nsec() - rx_begin_ns));
printf("total time in 'read()': %f sec\n", (float)in_read_ns / NSEC_PER_SEC);
printf("average time in 'read()': %f ns\n", (float)in_read_ns / read_cnt);
printf("POLLIN wakeups: %i\n", read_cnt);
free(data);
close(client_fd);
close(fd);
}
static void run_sender(int peer_cid, unsigned long to_send_bytes)
{
time_t tx_begin_ns;
time_t tx_total_ns;
size_t total_send;
void *data;
int fd;
printf("Run as sender\n");
printf("Connect to %i:%u\n", peer_cid, port);
printf("Send %lu bytes\n", to_send_bytes);
printf("TX buffer %lu bytes\n", buf_size_bytes);
fd = vsock_connect(peer_cid, port);
if (fd < 0)
exit(EXIT_FAILURE);
data = malloc(buf_size_bytes);
if (!data) {
fprintf(stderr, "'malloc()' failed\n");
exit(EXIT_FAILURE);
}
memset(data, 0, buf_size_bytes);
total_send = 0;
tx_begin_ns = current_nsec();
while (total_send < to_send_bytes) {
ssize_t sent;
sent = write(fd, data, buf_size_bytes);
if (sent <= 0)
error("write");
total_send += sent;
}
tx_total_ns = current_nsec() - tx_begin_ns;
printf("total bytes sent: %zu\n", total_send);
printf("tx performance: %f Gbits/s\n",
get_gbps(total_send * 8, tx_total_ns));
printf("total time in 'write()': %f sec\n",
(float)tx_total_ns / NSEC_PER_SEC);
close(fd);
free(data);
}
static const char optstring[] = "";
static const struct option longopts[] = {
{
.name = "help",
.has_arg = no_argument,
.val = 'H',
},
{
.name = "sender",
.has_arg = required_argument,
.val = 'S',
},
{
.name = "port",
.has_arg = required_argument,
.val = 'P',
},
{
.name = "bytes",
.has_arg = required_argument,
.val = 'M',
},
{
.name = "buf-size",
.has_arg = required_argument,
.val = 'B',
},
{
.name = "vsk-size",
.has_arg = required_argument,
.val = 'V',
},
{
.name = "rcvlowat",
.has_arg = required_argument,
.val = 'R',
},
{},
};
static void usage(void)
{
printf("Usage: ./vsock_perf [--help] [options]\n"
"\n"
"This is benchmarking utility, to test vsock performance.\n"
"It runs in two modes: sender or receiver. In sender mode, it\n"
"connects to the specified CID and starts data transmission.\n"
"\n"
"Options:\n"
" --help This message\n"
" --sender <cid> Sender mode (receiver default)\n"
" <cid> of the receiver to connect to\n"
" --port <port> Port (default %d)\n"
" --bytes <bytes>KMG Bytes to send (default %d)\n"
" --buf-size <bytes>KMG Data buffer size (default %d). In sender mode\n"
" it is the buffer size, passed to 'write()'. In\n"
" receiver mode it is the buffer size passed to 'read()'.\n"
" --vsk-size <bytes>KMG Socket buffer size (default %d)\n"
" --rcvlowat <bytes>KMG SO_RCVLOWAT value (default %d)\n"
"\n", DEFAULT_PORT, DEFAULT_TO_SEND_BYTES,
DEFAULT_BUF_SIZE_BYTES, DEFAULT_VSOCK_BUF_BYTES,
DEFAULT_RCVLOWAT_BYTES);
exit(EXIT_FAILURE);
}
static long strtolx(const char *arg)
{
long value;
char *end;
value = strtol(arg, &end, 10);
if (end != arg + strlen(arg))
usage();
return value;
}
int main(int argc, char **argv)
{
unsigned long to_send_bytes = DEFAULT_TO_SEND_BYTES;
unsigned long rcvlowat_bytes = DEFAULT_RCVLOWAT_BYTES;
int peer_cid = -1;
bool sender = false;
while (1) {
int opt = getopt_long(argc, argv, optstring, longopts, NULL);
if (opt == -1)
break;
switch (opt) {
case 'V': /* Peer buffer size. */
vsock_buf_bytes = memparse(optarg);
break;
case 'R': /* SO_RCVLOWAT value. */
rcvlowat_bytes = memparse(optarg);
break;
case 'P': /* Port to connect to. */
port = strtolx(optarg);
break;
case 'M': /* Bytes to send. */
to_send_bytes = memparse(optarg);
break;
case 'B': /* Size of rx/tx buffer. */
buf_size_bytes = memparse(optarg);
break;
case 'S': /* Sender mode. CID to connect to. */
peer_cid = strtolx(optarg);
sender = true;
break;
case 'H': /* Help. */
usage();
break;
default:
usage();
}
}
if (!sender)
run_receiver(rcvlowat_bytes);
else
run_sender(peer_cid, to_send_bytes);
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment