Commit 8ad69f49 authored by Conor Dooley's avatar Conor Dooley Committed by Wolfram Sang

dt-bindings: i2c: convert ocores binding to yaml

Convert the open cores i2c controller binding from text to yaml.
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarConor Dooley <conor.dooley@microchip.com>
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent 74557cb4
Device tree configuration for i2c-ocores
Required properties:
- compatible : "opencores,i2c-ocores"
"aeroflexgaisler,i2cmst"
"sifive,fu540-c000-i2c", "sifive,i2c0"
For Opencore based I2C IP block reimplemented in
FU540-C000 SoC.
"sifive,fu740-c000-i2c", "sifive,i2c0"
For Opencore based I2C IP block reimplemented in
FU740-C000 SoC.
Please refer to sifive-blocks-ip-versioning.txt for
additional details.
- reg : bus address start and address range size of device
- clocks : handle to the controller clock; see the note below.
Mutually exclusive with opencores,ip-clock-frequency
- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
see the note below. Mutually exclusive with clocks
- #address-cells : should be <1>
- #size-cells : should be <0>
Optional properties:
- interrupts : interrupt number.
- clock-frequency : frequency of bus clock in Hz; see the note below.
Defaults to 100 KHz when the property is not specified
- reg-shift : device register offsets are shifted by this value
- reg-io-width : io register width in bytes (1, 2 or 4)
- regstep : deprecated, use reg-shift above
Note
clock-frequency property is meant to control the bus frequency for i2c bus
drivers, but it was incorrectly used to specify i2c controller input clock
frequency. So the following rules are set to fix this situation:
- if clock-frequency is present and neither opencores,ip-clock-frequency nor
clocks are, then clock-frequency specifies i2c controller clock frequency.
This is to keep backwards compatibility with setups using old DTB. i2c bus
frequency is fixed at 100 KHz.
- if clocks is present it specifies i2c controller clock. clock-frequency
property specifies i2c bus frequency.
- if opencores,ip-clock-frequency is present it specifies i2c controller
clock frequency. clock-frequency property specifies i2c bus frequency.
Examples:
i2c0: ocores@a0000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
interrupts = <10>;
opencores,ip-clock-frequency = <20000000>;
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
dummy@60 {
compatible = "dummy";
reg = <0x60>;
};
};
or
i2c0: ocores@a0000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
interrupts = <10>;
clocks = <&osc>;
clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
dummy@60 {
compatible = "dummy";
reg = <0x60>;
};
};
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: OpenCores I2C controller
maintainers:
- Peter Korsgaard <peter@korsgaard.com>
- Andrew Lunn <andrew@lunn.ch>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
properties:
compatible:
oneOf:
- items:
- enum:
- sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
- sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
- const: sifive,i2c0
- enum:
- opencores,i2c-ocores
- aeroflexgaisler,i2cmst
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-frequency:
description: |
clock-frequency property is meant to control the bus frequency for i2c bus
drivers, but it was incorrectly used to specify i2c controller input clock
frequency. So the following rules are set to fix this situation:
- if clock-frequency is present and neither opencores,ip-clock-frequency nor
clocks are, then clock-frequency specifies i2c controller clock frequency.
This is to keep backwards compatibility with setups using old DTB. i2c bus
frequency is fixed at 100 KHz.
- if clocks is present it specifies i2c controller clock. clock-frequency
property specifies i2c bus frequency.
- if opencores,ip-clock-frequency is present it specifies i2c controller
clock frequency. clock-frequency property specifies i2c bus frequency.
default: 100000
reg-io-width:
description: |
io register width in bytes
enum: [1, 2, 4]
reg-shift:
description: |
device register offsets are shifted by this value
default: 0
regstep:
description: |
deprecated, use reg-shift above
deprecated: true
opencores,ip-clock-frequency:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Frequency of the controller clock in Hz. Mutually exclusive with clocks.
See the note above.
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
oneOf:
- required:
- opencores,ip-clock-frequency
- required:
- clocks
unevaluatedProperties: false
examples:
- |
i2c@a0000000 {
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <10>;
opencores,ip-clock-frequency = <20000000>;
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
};
i2c@b0000000 {
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <10>;
clocks = <&osc>;
clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
};
...
...@@ -14869,7 +14869,7 @@ M: Peter Korsgaard <peter@korsgaard.com> ...@@ -14869,7 +14869,7 @@ M: Peter Korsgaard <peter@korsgaard.com>
M: Andrew Lunn <andrew@lunn.ch> M: Andrew Lunn <andrew@lunn.ch>
L: linux-i2c@vger.kernel.org L: linux-i2c@vger.kernel.org
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-ocores.txt F: Documentation/devicetree/bindings/i2c/i2c-ocores.yaml
F: Documentation/i2c/busses/i2c-ocores.rst F: Documentation/i2c/busses/i2c-ocores.rst
F: drivers/i2c/busses/i2c-ocores.c F: drivers/i2c/busses/i2c-ocores.c
F: include/linux/platform_data/i2c-ocores.h F: include/linux/platform_data/i2c-ocores.h
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment