Commit 8afba181 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire',...

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/pl022', 'spi/topic/pm' and 'spi/topic/pxa2xx' into spi-next
...@@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers: ...@@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers:
.driver = { .driver = {
.name = "CHIP", .name = "CHIP",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.pm = &CHIP_pm_ops,
}, },
.probe = CHIP_probe, .probe = CHIP_probe,
.remove = CHIP_remove, .remove = CHIP_remove,
.suspend = CHIP_suspend,
.resume = CHIP_resume,
}; };
The driver core will automatically attempt to bind this driver to any SPI The driver core will automatically attempt to bind this driver to any SPI
......
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/err.h> #include <linux/err.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -294,16 +295,6 @@ static int omap1_spi100k_setup(struct spi_device *spi) ...@@ -294,16 +295,6 @@ static int omap1_spi100k_setup(struct spi_device *spi)
return ret; return ret;
} }
static int omap1_spi100k_prepare_hardware(struct spi_master *master)
{
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
clk_prepare_enable(spi100k->ick);
clk_prepare_enable(spi100k->fck);
return 0;
}
static int omap1_spi100k_transfer_one_message(struct spi_master *master, static int omap1_spi100k_transfer_one_message(struct spi_master *master,
struct spi_message *m) struct spi_message *m)
{ {
...@@ -372,16 +363,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master, ...@@ -372,16 +363,6 @@ static int omap1_spi100k_transfer_one_message(struct spi_master *master,
return status; return status;
} }
static int omap1_spi100k_unprepare_hardware(struct spi_master *master)
{
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
clk_disable_unprepare(spi100k->ick);
clk_disable_unprepare(spi100k->fck);
return 0;
}
static int omap1_spi100k_probe(struct platform_device *pdev) static int omap1_spi100k_probe(struct platform_device *pdev)
{ {
struct spi_master *master; struct spi_master *master;
...@@ -402,14 +383,12 @@ static int omap1_spi100k_probe(struct platform_device *pdev) ...@@ -402,14 +383,12 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
master->setup = omap1_spi100k_setup; master->setup = omap1_spi100k_setup;
master->transfer_one_message = omap1_spi100k_transfer_one_message; master->transfer_one_message = omap1_spi100k_transfer_one_message;
master->prepare_transfer_hardware = omap1_spi100k_prepare_hardware;
master->unprepare_transfer_hardware = omap1_spi100k_unprepare_hardware;
master->cleanup = NULL;
master->num_chipselect = 2; master->num_chipselect = 2;
master->mode_bits = MODEBITS; master->mode_bits = MODEBITS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16); master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ; master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
master->auto_runtime_pm = true;
spi100k = spi_master_get_devdata(master); spi100k = spi_master_get_devdata(master);
...@@ -434,22 +413,96 @@ static int omap1_spi100k_probe(struct platform_device *pdev) ...@@ -434,22 +413,96 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
goto err; goto err;
} }
status = clk_prepare_enable(spi100k->ick);
if (status != 0) {
dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
goto err;
}
status = clk_prepare_enable(spi100k->fck);
if (status != 0) {
dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
goto err_ick;
}
pm_runtime_enable(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
status = devm_spi_register_master(&pdev->dev, master); status = devm_spi_register_master(&pdev->dev, master);
if (status < 0) if (status < 0)
goto err; goto err_fck;
return status; return status;
err_fck:
clk_disable_unprepare(spi100k->fck);
err_ick:
clk_disable_unprepare(spi100k->ick);
err: err:
spi_master_put(master); spi_master_put(master);
return status; return status;
} }
static int omap1_spi100k_remove(struct platform_device *pdev)
{
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(spi100k->fck);
clk_disable_unprepare(spi100k->ick);
return 0;
}
#ifdef CONFIG_PM
static int omap1_spi100k_runtime_suspend(struct device *dev)
{
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
clk_disable_unprepare(spi100k->ick);
clk_disable_unprepare(spi100k->fck);
return 0;
}
static int omap1_spi100k_runtime_resume(struct device *dev)
{
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
int ret;
ret = clk_prepare_enable(spi100k->ick);
if (ret != 0) {
dev_err(dev, "Failed to enable ick: %d\n", ret);
return ret;
}
ret = clk_prepare_enable(spi100k->fck);
if (ret != 0) {
dev_err(dev, "Failed to enable fck: %d\n", ret);
clk_disable_unprepare(spi100k->ick);
return ret;
}
return 0;
}
#endif
static const struct dev_pm_ops omap1_spi100k_pm = {
SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
omap1_spi100k_runtime_resume, NULL)
};
static struct platform_driver omap1_spi100k_driver = { static struct platform_driver omap1_spi100k_driver = {
.driver = { .driver = {
.name = "omap1_spi100k", .name = "omap1_spi100k",
.pm = &omap1_spi100k_pm,
}, },
.probe = omap1_spi100k_probe, .probe = omap1_spi100k_probe,
.remove = omap1_spi100k_remove,
}; };
module_platform_driver(omap1_spi100k_driver); module_platform_driver(omap1_spi100k_driver);
......
...@@ -44,7 +44,6 @@ ...@@ -44,7 +44,6 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
......
...@@ -285,7 +285,12 @@ ...@@ -285,7 +285,12 @@
*/ */
#define DEFAULT_SSP_REG_IMSC 0x0UL #define DEFAULT_SSP_REG_IMSC 0x0UL
#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC #define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC) #define ENABLE_ALL_INTERRUPTS ( \
SSP_IMSC_MASK_RORIM | \
SSP_IMSC_MASK_RTIM | \
SSP_IMSC_MASK_RXIM | \
SSP_IMSC_MASK_TXIM \
)
#define CLEAR_ALL_INTERRUPTS 0x3 #define CLEAR_ALL_INTERRUPTS 0x3
...@@ -1251,7 +1256,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) ...@@ -1251,7 +1256,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
struct pl022 *pl022 = dev_id; struct pl022 *pl022 = dev_id;
struct spi_message *msg = pl022->cur_msg; struct spi_message *msg = pl022->cur_msg;
u16 irq_status = 0; u16 irq_status = 0;
u16 flag = 0;
if (unlikely(!msg)) { if (unlikely(!msg)) {
dev_err(&pl022->adev->dev, dev_err(&pl022->adev->dev,
...@@ -1280,9 +1284,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) ...@@ -1280,9 +1284,6 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
dev_err(&pl022->adev->dev, dev_err(&pl022->adev->dev,
"RXFIFO is full\n"); "RXFIFO is full\n");
if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
dev_err(&pl022->adev->dev,
"TXFIFO is full\n");
/* /*
* Disable and clear interrupts, disable SSP, * Disable and clear interrupts, disable SSP,
...@@ -1303,8 +1304,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) ...@@ -1303,8 +1304,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
readwriter(pl022); readwriter(pl022);
if ((pl022->tx == pl022->tx_end) && (flag == 0)) { if (pl022->tx == pl022->tx_end) {
flag = 1;
/* Disable Transmit interrupt, enable receive interrupt */ /* Disable Transmit interrupt, enable receive interrupt */
writew((readw(SSP_IMSC(pl022->virtbase)) & writew((readw(SSP_IMSC(pl022->virtbase)) &
~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM, ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM,
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/err.h> #include <linux/err.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/spi/pxa2xx_spi.h> #include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
...@@ -30,10 +31,6 @@ ...@@ -30,10 +31,6 @@
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
#include <linux/acpi.h> #include <linux/acpi.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/delay.h>
#include "spi-pxa2xx.h" #include "spi-pxa2xx.h"
MODULE_AUTHOR("Stephen Street"); MODULE_AUTHOR("Stephen Street");
...@@ -67,54 +64,6 @@ MODULE_ALIAS("platform:pxa2xx-spi"); ...@@ -67,54 +64,6 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define LPSS_TX_LOTHRESH_DFLT 160 #define LPSS_TX_LOTHRESH_DFLT 160
#define LPSS_TX_HITHRESH_DFLT 224 #define LPSS_TX_HITHRESH_DFLT 224
struct quark_spi_rate {
u32 bitrate;
u32 dds_clk_rate;
u32 clk_div;
};
/*
* 'rate', 'dds', 'clk_div' lookup table, which is defined in
* the Quark SPI datasheet.
*/
static const struct quark_spi_rate quark_spi_rate_table[] = {
/* bitrate, dds_clk_rate, clk_div */
{50000000, 0x800000, 0},
{40000000, 0x666666, 0},
{25000000, 0x400000, 0},
{20000000, 0x666666, 1},
{16667000, 0x800000, 2},
{13333000, 0x666666, 2},
{12500000, 0x200000, 0},
{10000000, 0x800000, 4},
{8000000, 0x666666, 4},
{6250000, 0x400000, 3},
{5000000, 0x400000, 4},
{4000000, 0x666666, 9},
{3125000, 0x80000, 0},
{2500000, 0x400000, 9},
{2000000, 0x666666, 19},
{1563000, 0x40000, 0},
{1250000, 0x200000, 9},
{1000000, 0x400000, 24},
{800000, 0x666666, 49},
{781250, 0x20000, 0},
{625000, 0x200000, 19},
{500000, 0x400000, 49},
{400000, 0x666666, 99},
{390625, 0x10000, 0},
{250000, 0x400000, 99},
{200000, 0x666666, 199},
{195313, 0x8000, 0},
{125000, 0x100000, 49},
{100000, 0x200000, 124},
{50000, 0x100000, 124},
{25000, 0x80000, 124},
{10016, 0x20000, 77},
{5040, 0x20000, 154},
{1002, 0x8000, 194},
};
/* Offset from drv_data->lpss_base */ /* Offset from drv_data->lpss_base */
#define GENERAL_REG 0x08 #define GENERAL_REG 0x08
#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) #define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
...@@ -701,25 +650,124 @@ static irqreturn_t ssp_int(int irq, void *dev_id) ...@@ -701,25 +650,124 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
} }
/* /*
* The Quark SPI data sheet gives a table, and for the given 'rate', * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply
* the 'dds' and 'clk_div' can be found in the table. * input frequency by fractions of 2^24. It also has a divider by 5.
*
* There are formulas to get baud rate value for given input frequency and
* divider parameters, such as DDS_CLK_RATE and SCR:
*
* Fsys = 200MHz
*
* Fssp = Fsys * DDS_CLK_RATE / 2^24 (1)
* Baud rate = Fsclk = Fssp / (2 * (SCR + 1)) (2)
*
* DDS_CLK_RATE either 2^n or 2^n / 5.
* SCR is in range 0 .. 255
*
* Divisor = 5^i * 2^j * 2 * k
* i = [0, 1] i = 1 iff j = 0 or j > 3
* j = [0, 23] j = 0 iff i = 1
* k = [1, 256]
* Special case: j = 0, i = 1: Divisor = 2 / 5
*
* Accordingly to the specification the recommended values for DDS_CLK_RATE
* are:
* Case 1: 2^n, n = [0, 23]
* Case 2: 2^24 * 2 / 5 (0x666666)
* Case 3: less than or equal to 2^24 / 5 / 16 (0x33333)
*
* In all cases the lowest possible value is better.
*
* The function calculates parameters for all cases and chooses the one closest
* to the asked baud rate.
*/ */
static u32 quark_x1000_set_clk_regvals(u32 rate, u32 *dds, u32 *clk_div) static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds)
{ {
unsigned int i; unsigned long xtal = 200000000;
unsigned long fref = xtal / 2; /* mandatory division by 2,
for (i = 0; i < ARRAY_SIZE(quark_spi_rate_table); i++) { see (2) */
if (rate >= quark_spi_rate_table[i].bitrate) { /* case 3 */
*dds = quark_spi_rate_table[i].dds_clk_rate; unsigned long fref1 = fref / 2; /* case 1 */
*clk_div = quark_spi_rate_table[i].clk_div; unsigned long fref2 = fref * 2 / 5; /* case 2 */
return quark_spi_rate_table[i].bitrate; unsigned long scale;
unsigned long q, q1, q2;
long r, r1, r2;
u32 mul;
/* Case 1 */
/* Set initial value for DDS_CLK_RATE */
mul = (1 << 24) >> 1;
/* Calculate initial quot */
q1 = DIV_ROUND_CLOSEST(fref1, rate);
/* Scale q1 if it's too big */
if (q1 > 256) {
/* Scale q1 to range [1, 512] */
scale = fls_long(q1 - 1);
if (scale > 9) {
q1 >>= scale - 9;
mul >>= scale - 9;
} }
/* Round the result if we have a remainder */
q1 += q1 & 1;
} }
*dds = quark_spi_rate_table[i-1].dds_clk_rate; /* Decrease DDS_CLK_RATE as much as we can without loss in precision */
*clk_div = quark_spi_rate_table[i-1].clk_div; scale = __ffs(q1);
q1 >>= scale;
mul >>= scale;
/* Get the remainder */
r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate);
/* Case 2 */
q2 = DIV_ROUND_CLOSEST(fref2, rate);
r2 = abs(fref2 / q2 - rate);
return quark_spi_rate_table[i-1].bitrate; /*
* Choose the best between two: less remainder we have the better. We
* can't go case 2 if q2 is greater than 256 since SCR register can
* hold only values 0 .. 255.
*/
if (r2 >= r1 || q2 > 256) {
/* case 1 is better */
r = r1;
q = q1;
} else {
/* case 2 is better */
r = r2;
q = q2;
mul = (1 << 24) * 2 / 5;
}
/* Check case 3 only If the divisor is big enough */
if (fref / rate >= 80) {
u64 fssp;
u32 m;
/* Calculate initial quot */
q1 = DIV_ROUND_CLOSEST(fref, rate);
m = (1 << 24) / q1;
/* Get the remainder */
fssp = (u64)fref * m;
do_div(fssp, 1 << 24);
r1 = abs(fssp - rate);
/* Choose this one if it suits better */
if (r1 < r) {
/* case 3 is better */
q = 1;
mul = m;
}
}
*dds = mul;
return q - 1;
} }
static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
...@@ -730,23 +778,25 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) ...@@ -730,23 +778,25 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
rate = min_t(int, ssp_clk, rate); rate = min_t(int, ssp_clk, rate);
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; return (ssp_clk / (2 * rate) - 1) & 0xff;
else else
return ((ssp_clk / rate - 1) & 0xfff) << 8; return (ssp_clk / rate - 1) & 0xfff;
} }
static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
struct chip_data *chip, int rate) struct chip_data *chip, int rate)
{ {
u32 clk_div; unsigned int clk_div;
switch (drv_data->ssp_type) { switch (drv_data->ssp_type) {
case QUARK_X1000_SSP: case QUARK_X1000_SSP:
quark_x1000_set_clk_regvals(rate, &chip->dds_rate, &clk_div); clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate);
return clk_div << 8; break;
default: default:
return ssp_get_clk_div(drv_data, rate); clk_div = ssp_get_clk_div(drv_data, rate);
break;
} }
return clk_div << 8;
} }
static void pump_transfers(unsigned long data) static void pump_transfers(unsigned long data)
......
...@@ -128,125 +128,11 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) ...@@ -128,125 +128,11 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
return 0; return 0;
} }
#ifdef CONFIG_PM_SLEEP
static int spi_legacy_suspend(struct device *dev, pm_message_t message)
{
int value = 0;
struct spi_driver *drv = to_spi_driver(dev->driver);
/* suspend will stop irqs and dma; no more i/o */
if (drv) {
if (drv->suspend)
value = drv->suspend(to_spi_device(dev), message);
else
dev_dbg(dev, "... can't suspend\n");
}
return value;
}
static int spi_legacy_resume(struct device *dev)
{
int value = 0;
struct spi_driver *drv = to_spi_driver(dev->driver);
/* resume may restart the i/o queue */
if (drv) {
if (drv->resume)
value = drv->resume(to_spi_device(dev));
else
dev_dbg(dev, "... can't resume\n");
}
return value;
}
static int spi_pm_suspend(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_suspend(dev);
else
return spi_legacy_suspend(dev, PMSG_SUSPEND);
}
static int spi_pm_resume(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_resume(dev);
else
return spi_legacy_resume(dev);
}
static int spi_pm_freeze(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_freeze(dev);
else
return spi_legacy_suspend(dev, PMSG_FREEZE);
}
static int spi_pm_thaw(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_thaw(dev);
else
return spi_legacy_resume(dev);
}
static int spi_pm_poweroff(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_poweroff(dev);
else
return spi_legacy_suspend(dev, PMSG_HIBERNATE);
}
static int spi_pm_restore(struct device *dev)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pm)
return pm_generic_restore(dev);
else
return spi_legacy_resume(dev);
}
#else
#define spi_pm_suspend NULL
#define spi_pm_resume NULL
#define spi_pm_freeze NULL
#define spi_pm_thaw NULL
#define spi_pm_poweroff NULL
#define spi_pm_restore NULL
#endif
static const struct dev_pm_ops spi_pm = {
.suspend = spi_pm_suspend,
.resume = spi_pm_resume,
.freeze = spi_pm_freeze,
.thaw = spi_pm_thaw,
.poweroff = spi_pm_poweroff,
.restore = spi_pm_restore,
SET_RUNTIME_PM_OPS(
pm_generic_runtime_suspend,
pm_generic_runtime_resume,
NULL
)
};
struct bus_type spi_bus_type = { struct bus_type spi_bus_type = {
.name = "spi", .name = "spi",
.dev_groups = spi_dev_groups, .dev_groups = spi_dev_groups,
.match = spi_match_device, .match = spi_match_device,
.uevent = spi_uevent, .uevent = spi_uevent,
.pm = &spi_pm,
}; };
EXPORT_SYMBOL_GPL(spi_bus_type); EXPORT_SYMBOL_GPL(spi_bus_type);
......
...@@ -162,8 +162,6 @@ struct spi_transfer; ...@@ -162,8 +162,6 @@ struct spi_transfer;
* @remove: Unbinds this driver from the spi device * @remove: Unbinds this driver from the spi device
* @shutdown: Standard shutdown callback used during system state * @shutdown: Standard shutdown callback used during system state
* transitions such as powerdown/halt and kexec * transitions such as powerdown/halt and kexec
* @suspend: Standard suspend callback used during system state transitions
* @resume: Standard resume callback used during system state transitions
* @driver: SPI device drivers should initialize the name and owner * @driver: SPI device drivers should initialize the name and owner
* field of this structure. * field of this structure.
* *
...@@ -184,8 +182,6 @@ struct spi_driver { ...@@ -184,8 +182,6 @@ struct spi_driver {
int (*probe)(struct spi_device *spi); int (*probe)(struct spi_device *spi);
int (*remove)(struct spi_device *spi); int (*remove)(struct spi_device *spi);
void (*shutdown)(struct spi_device *spi); void (*shutdown)(struct spi_device *spi);
int (*suspend)(struct spi_device *spi, pm_message_t mesg);
int (*resume)(struct spi_device *spi);
struct device_driver driver; struct device_driver driver;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment