Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -13,7 +13,10 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-gpio
+      - enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+          - canaan,k210-gpiohs
       - const: sifive,gpio0
 
   reg:
@@ -21,9 +24,9 @@ properties:
 
   interrupts:
     description:
-      interrupt mapping one per GPIO. Maximum 16 GPIOs.
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
     minItems: 1
-    maxItems: 16
+    maxItems: 32
 
   interrupt-controller: true
 
@@ -36,6 +39,14 @@ properties:
   "#gpio-cells":
     const: 2
 
+  ngpios:
+    description:
+      The number of GPIOs available on the controller implementation.
+      It is 16 for the SiFive SoCs and 32 for the Canaan K210.
+    minimum: 1
+    maximum: 32
+    default: 16
+
   gpio-controller: true
 
 required:
@@ -44,10 +55,20 @@ required:
   - interrupts
   - interrupt-controller
   - "#interrupt-cells"
-  - clocks
   - "#gpio-cells"
   - gpio-controller
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,fu540-c000-gpio
+          - sifive,fu740-c000-gpio
+then:
+  required:
+    - clocks
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml

@@ -8,10 +8,11 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive Platform-Level Interrupt Controller (PLIC)
 
 description:
-  SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
-  (PLIC) high-level specification in the RISC-V Privileged Architecture
-  specification. The PLIC connects all external interrupts in the system to all
-  hart contexts in the system, via the external interrupt source in each hart.
+  SiFive SoCs and other RISC-V SoCs include an implementation of the
+  Platform-Level Interrupt Controller (PLIC) high-level specification in
+  the RISC-V Privileged Architecture specification. The PLIC connects all
+  external interrupts in the system to all hart contexts in the system, via
+  the external interrupt source in each hart.
 
   A hart context is a privilege mode in a hardware execution thread. For example,
   in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
@@ -42,7 +43,9 @@ maintainers:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-plic
+      - enum:
+          - sifive,fu540-c000-plic
+          - canaan,k210-plic
       - const: sifive,plic-1.0.0
 
   reg:

Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 System Controller Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Inc. Kendryte K210 SoC system controller which provides a
+  register map for controlling the clocks, reset signals and pin power
+  domains of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: canaan,k210-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  clocks:
+    maxItems: 1
+    description:
+      System controller Advanced Power Bus (APB) interface clock source.
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    # Child node
+    type: object
+    $ref: "../clock/canaan,k210-clk.yaml"
+    description:
+      Clock controller for the SoC clocks. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml.
+
+  reset-controller:
+    # Child node
+    type: object
+    $ref: "../reset/canaan,k210-rst.yaml"
+    description:
+      Reset controller for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml.
+
+  syscon-reboot:
+    # Child node
+    type: object
+    $ref: "../power/reset/syscon-reboot.yaml"
+    description:
+      Reboot method for the SoC. This child node definition
+      should follow the bindings specified in
+      Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml.
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    clocks {
+      in0: oscllator {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <26000000>;
+      };
+    };
+
+    sysctl: syscon@50440000 {
+      compatible = "canaan,k210-sysctl",
+                   "syscon", "simple-mfd";
+      reg = <0x50440000 0x100>;
+      clocks = <&sysclk K210_CLK_APB1>;
+      clock-names = "pclk";
+
+      sysclk: clock-controller {
+        #clock-cells = <1>;
+        compatible = "canaan,k210-clk";
+        clocks = <&in0>;
+      };
+
+      sysrst: reset-controller {
+        compatible = "canaan,k210-rst";
+        #reset-cells = <1>;
+      };
+
+      reboot: syscon-reboot {
+        compatible = "syscon-reboot";
+        regmap = <&sysctl>;
+        offset = <48>;
+        mask = <1>;
+        value = <1>;
+      };
+    };

Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+  controller allows assiging any of 256 possible functions to any of
+  48 IO pins of the SoC. Pin function configuration is performed on
+  a per-pin basis.
+
+properties:
+  compatible:
+    const: canaan,k210-fpioa
+
+  reg:
+    maxItems: 1
+    description:
+      Address and length of the register set for the FPIOA controller.
+
+  clocks:
+    items:
+      - description: Controller reference clock source
+      - description: APB interface clock source
+
+  clock-names:
+    items:
+      - const: ref
+      - const: pclk
+
+  resets:
+    maxItems: 1
+
+  canaan,k210-sysctl-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      phandle of the K210 system controller node and offset of its
+      power domain control register.
+
+patternProperties:
+  '-pinmux$':
+    type: object
+    $ref: /schemas/pinctrl/pinmux-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired pin
+      configuration. Client device sub-nodes use the pinux property
+      below.
+
+    properties:
+      pinmux:
+        description:
+          List of IO pins alternate functions. The values for each IO
+          pin is a combination of an IO pin number (0 to 47) with the
+          desired function for the IO pin. Functions are defined as
+          macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+          The K210_FPIOA(IO pin, function) macro is provided to
+          facilitate the combination of IO pin numbers and functions.
+
+    required:
+      - pinmux
+
+    additionalProperties: false
+
+  '-pins$':
+    type: object
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+    description:
+      FPIOA client devices use sub-nodes to define the desired
+      configuration of pins. Client device sub-nodes use the
+      properties below.
+
+    properties:
+      pins:
+        description:
+          List of IO pins affected by the properties specified in this
+          subnode. IO pins are identified using the pin names "IO_xx".
+          Pin configuration nodes can also define the power domain to
+          be used for the SoC pin groups A0 (IO pins 0-5),
+          A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+          B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+          C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+          power-source property.
+        items:
+          anyOf:
+            - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+            - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+                      IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+                      IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+                      IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+                      IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+                      IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+                      IO_43, IO_44, IO_45, IO_46, IO_47,
+                      A0, A1, A2, B3, B4, B5, C6, C7 ]
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength: true
+
+      drive-strength-microamp: true
+
+      input-enable: true
+
+      input-disable: true
+
+      input-schmitt-enable: true
+
+      input-schmitt-disable: true
+
+      input-polarity-invert:
+        description:
+          Enable or disable pin input polarity inversion.
+
+      output-enable: true
+
+      output-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      output-polarity-invert:
+        description:
+          Enable or disable pin output polarity inversion.
+
+      slew-rate: true
+
+      power-source: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/k210-fpioa.h>
+    #include <dt-bindings/clock/k210-clk.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    fpioa: pinmux@502B0000 {
+      compatible = "canaan,k210-fpioa";
+      reg = <0x502B0000 0x100>;
+      clocks = <&sysclk K210_CLK_FPIOA>,
+               <&sysclk K210_CLK_APB0>;
+      clock-names = "ref", "pclk";
+      resets = <&sysrst K210_RST_FPIOA>;
+      canaan,k210-sysctl-power = <&sysctl 108>;
+      pinctrl-0 = <&jtag_pinctrl>;
+      pinctrl-names = "default";
+
+      jtag_pinctrl: jtag-pinmux {
+        pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+                 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+                 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+                 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+      };
+    };

Documentation/devicetree/bindings/pwm/pwm-sifive.yaml

@@ -25,12 +25,15 @@ description:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-pwm
+      - enum:
+          - sifive,fu540-c000-pwm
+          - sifive,fu740-c000-pwm
       - const: sifive,pwm0
     description:
       Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported
-      compatible strings are "sifive,fu540-c000-pwm" for the SiFive PWM v0
-      as integrated onto the SiFive FU540 chip, and "sifive,pwm0" for the
+      compatible strings are "sifive,fu540-c000-pwm" and
+      "sifive,fu740-c000-pwm" for the SiFive PWM v0 as integrated onto the
+      SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the
       SiFive PWM v0 IP block with no chip integration tweaks.
       Please refer to sifive-blocks-ip-versioning.txt for details.
 

Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 Reset Controller Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Canaan Kendryte K210 reset controller driver which supports the SoC
+  system controller supplied reset registers for the various peripherals
+  of the SoC. The K210 reset controller node must be defined as a child
+  node of the K210 system controller node.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    const: canaan,k210-rst
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/k210-rst.h>
+    sysrst: reset-controller {
+      compatible = "canaan,k210-rst";
+      #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/riscv/canaan.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/riscv/canaan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan SoC-based boards
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description:
+  Canaan Kendryte K210 SoC-based boards
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - const: sipeed,maix-bit
+          - const: sipeed,maix-bitm
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-go
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maix-dock-m1
+          - const: sipeed,maix-dock-m1w
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: sipeed,maixduino
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-kd233
+          - const: canaan,kendryte-k210
+
+      - items:
+          - const: canaan,kendryte-k210
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -28,11 +28,18 @@ properties:
       - items:
           - enum:
               - sifive,rocket0
+              - sifive,bullet0
               - sifive,e5
+              - sifive,e7
               - sifive,e51
+              - sifive,e71
               - sifive,u54-mc
+              - sifive,u74-mc
               - sifive,u54
+              - sifive,u74
               - sifive,u5
+              - sifive,u7
+              - canaan,k210
           - const: riscv
       - const: riscv    # Simulator only
     description:
@@ -50,6 +57,7 @@ properties:
       - riscv,sv32
       - riscv,sv39
       - riscv,sv48
+      - riscv,none
 
   riscv,isa:
     description:

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -27,6 +27,7 @@ select:
       items:
         - enum:
             - sifive,fu540-c000-ccache
+            - sifive,fu740-c000-ccache
 
   required:
     - compatible
@@ -34,7 +35,9 @@ select:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-ccache
+      - enum:
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
       - const: cache
 
   cache-block-size:
@@ -52,10 +55,13 @@ properties:
   cache-unified: true
 
   interrupts:
-    description: |
-      Must contain entries for DirError, DataError and DataFail signals.
     minItems: 3
-    maxItems: 3
+    maxItems: 4
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
 
   reg:
     maxItems: 1
@@ -68,6 +74,26 @@ properties:
       The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
       The reserved memory node should be defined as per the bindings in reserved-memory.txt.
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: sifive,fu540-c000-ccache
+
+then:
+  properties:
+    interrupts:
+      description: |
+        Must contain entries for DirError, DataError and DataFail signals.
+      maxItems: 3
+
+else:
+  properties:
+    interrupts:
+      description: |
+        Must contain entries for DirError, DataError, DataFail, DirFail signals.
+      minItems: 4
+
 additionalProperties: false
 
 required:

Documentation/devicetree/bindings/riscv/sifive.yaml

@@ -17,12 +17,19 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
+    oneOf:
+      - items:
           - enum:
               - sifive,hifive-unleashed-a00
           - const: sifive,fu540-c000
           - const: sifive,fu540
 
+      - items:
+          - enum:
+              - sifive,hifive-unmatched-a00
+          - const: sifive,fu740-c000
+          - const: sifive,fu740
+
 additionalProperties: true
 
 ...

Documentation/devicetree/bindings/serial/sifive-serial.yaml

@@ -20,6 +20,7 @@ properties:
       - enum:
           - sifive,fu540-c000-uart
           - sifive,fu740-c000-uart
+          - canaan,k210-uarths
       - const: sifive,uart0
 
     description:

Documentation/devicetree/bindings/timer/sifive,clint.yaml

@@ -23,15 +23,19 @@ description:
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-clint
+      - enum:
+          - sifive,fu540-c000-clint
+          - canaan,k210-clint
       - const: sifive,clint0
 
     description:
-      Should be "sifive,<chip>-clint" and "sifive,clint<version>".
+      Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
       Supported compatible strings are -
       "sifive,fu540-c000-clint" for the SiFive CLINT v0 as integrated
-      onto the SiFive FU540 chip, and "sifive,clint0" for the SiFive
-      CLINT v0 IP block with no chip integration tweaks.
+      onto the SiFive FU540 chip, "canaan,k210-clint" for the SiFive
+      CLINT v0 as integrated onto the Canaan Kendryte K210 chip, and
+      "sifive,clint0" for the SiFive CLINT v0 IP block with no chip
+      integration tweaks.
       Please refer to sifive-blocks-ip-versioning.txt for details
 
   reg:

Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml

@@ -24,6 +24,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   clocks:
     minItems: 1
     items:

MAINTAINERS

@@ -3855,6 +3855,29 @@ W:	https://github.com/Cascoda/ca8210-linux.git
 F:	Documentation/devicetree/bindings/net/ieee802154/ca8210.txt
 F:	drivers/net/ieee802154/ca8210.c
 
+CANAAN/KENDRYTE K210 SOC FPIOA DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-riscv@lists.infradead.org
+L:	linux-gpio@vger.kernel.org (pinctrl driver)
+F:	Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+F:	drivers/pinctrl/pinctrl-k210.c
+
+CANAAN/KENDRYTE K210 SOC RESET CONTROLLER DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-kernel@vger.kernel.org
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
+F:	drivers/reset/reset-k210.c
+
+CANAAN/KENDRYTE K210 SOC SYSTEM CONTROLLER DRIVER
+M:	Damien Le Moal <damien.lemoal@wdc.com>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+F:      Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+F:	drivers/soc/canaan/
+F:	include/soc/canaan/
+
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
 M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com (moderated for non-subscribers)

arch/arm64/Kconfig

@@ -999,6 +999,7 @@ config HOTPLUG_CPU
 # Common NUMA Features
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
+	select GENERIC_ARCH_NUMA
 	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	help

arch/arm64/include/asm/numa.h

@@ -3,52 +3,6 @@
 #define __ASM_NUMA_H
 
 #include <asm/topology.h>
-
-#ifdef CONFIG_NUMA
-
-#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
-
-int __node_distance(int from, int to);
-#define node_distance(a, b) __node_distance(a, b)
-
-extern nodemask_t numa_nodes_parsed __initdata;
-
-extern bool numa_off;
-
-/* Mappings between node number and cpus on that node. */
-extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
-void numa_clear_node(unsigned int cpu);
-
-#ifdef CONFIG_DEBUG_PER_CPU_MAPS
-const struct cpumask *cpumask_of_node(int node);
-#else
-/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
-static inline const struct cpumask *cpumask_of_node(int node)
-{
-	if (node == NUMA_NO_NODE)
-		return cpu_all_mask;
-
-	return node_to_cpumask_map[node];
-}
-#endif
-
-void __init arm64_numa_init(void);
-int __init numa_add_memblk(int nodeid, u64 start, u64 end);
-void __init numa_set_distance(int from, int to, int distance);
-void __init numa_free_distance(void);
-void __init early_map_cpu_to_node(unsigned int cpu, int nid);
-void numa_store_cpu_info(unsigned int cpu);
-void numa_add_cpu(unsigned int cpu);
-void numa_remove_cpu(unsigned int cpu);
-
-#else	/* CONFIG_NUMA */
-
-static inline void numa_store_cpu_info(unsigned int cpu) { }
-static inline void numa_add_cpu(unsigned int cpu) { }
-static inline void numa_remove_cpu(unsigned int cpu) { }
-static inline void arm64_numa_init(void) { }
-static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { }
-
-#endif	/* CONFIG_NUMA */
+#include <asm-generic/numa.h>
 
 #endif	/* __ASM_NUMA_H */

arch/arm64/kernel/acpi_numa.c

@@ -118,15 +118,3 @@ void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa)
 	node_set(node, numa_nodes_parsed);
 }
 
-int __init arm64_acpi_numa_init(void)
-{
-	int ret;
-
-	ret = acpi_numa_init();
-	if (ret) {
-		pr_info("Failed to initialise from firmware\n");
-		return ret;
-	}
-
-	return srat_disabled() ? -EINVAL : 0;
-}

arch/arm64/mm/Makefile

@@ -7,7 +7,6 @@ obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PTDUMP_CORE)	+= ptdump.o
 obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd.o
-obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 obj-$(CONFIG_ARM64_MTE)		+= mteswap.o
 KASAN_SANITIZE_physaddr.o	+= n

arch/arm64/mm/init.c

@@ -416,10 +416,10 @@ void __init bootmem_init(void)
 	max_pfn = max_low_pfn = max;
 	min_low_pfn = min;
 
-	arm64_numa_init();
+	arch_numa_init();
 
 	/*
-	 * must be done after arm64_numa_init() which calls numa_init() to
+	 * must be done after arch_numa_init() which calls numa_init() to
 	 * initialize node_online_map that gets used in hugetlb_cma_reserve()
 	 * while allocating required CMA size across online nodes.
 	 */

arch/riscv/Kconfig

@@ -57,6 +57,7 @@ config RISCV
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN if MMU && 64BIT
+	select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_KGDB_QXFER_PKT
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
@@ -67,14 +68,19 @@ config RISCV
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_EBPF_JIT if MMU
+	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO if MMU && 64BIT
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_KPROBES
+	select HAVE_KPROBES_ON_FTRACE
+	select HAVE_KRETPROBES
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
@@ -143,7 +149,7 @@ config PAGE_OFFSET
 	default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
 
 config ARCH_FLATMEM_ENABLE
-	def_bool y
+	def_bool !NUMA
 
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
@@ -156,6 +162,9 @@ config ARCH_SELECT_MEMORY_MODEL
 config ARCH_WANT_GENERAL_HUGETLB
 	def_bool y
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 config SYS_SUPPORTS_HUGETLBFS
 	depends on MMU
 	def_bool y
@@ -302,6 +311,35 @@ config TUNE_GENERIC
 
 endchoice
 
+# Common NUMA Features
+config NUMA
+	bool "NUMA Memory Allocation and Scheduler Support"
+	select GENERIC_ARCH_NUMA
+	select OF_NUMA
+	select ARCH_SUPPORTS_NUMA_BALANCING
+	help
+	  Enable NUMA (Non-Uniform Memory Access) support.
+
+	  The kernel will try to allocate memory used by a CPU on the
+	  local memory of the CPU and add some more NUMA awareness to the kernel.
+
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 1 10
+	default "2"
+	depends on NEED_MULTIPLE_NODES
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accommodate various tables.
+
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+	depends on NUMA
+
 config RISCV_ISA_C
 	bool "Emit compressed instructions when building Linux"
 	default y
@@ -416,11 +454,17 @@ config EFI
 	  allow the kernel to be booted as an EFI application. This
 	  is only useful on systems that have UEFI firmware.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	def_bool y
+	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
+
 endmenu
 
 config BUILTIN_DTB
 	def_bool n
-	depends on RISCV_M_MODE
 	depends on OF
 
 menu "Power management options"

arch/riscv/Kconfig.socs

@@ -22,30 +22,41 @@ config SOC_VIRT
 	help
 	  This enables support for QEMU Virt Machine.
 
-config SOC_KENDRYTE
-	bool "Kendryte K210 SoC"
+config SOC_CANAAN
+	bool "Canaan Kendryte K210 SoC"
 	depends on !MMU
 	select CLINT_TIMER if RISCV_M_MODE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select SIFIVE_PLIC
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
 	help
-	  This enables support for Kendryte K210 SoC platform hardware.
+	  This enables support for Canaan Kendryte K210 SoC platform hardware.
 
-config SOC_KENDRYTE_K210_DTB
-	def_bool y
-	depends on SOC_KENDRYTE_K210_DTB_BUILTIN
+if SOC_CANAAN
 
-config SOC_KENDRYTE_K210_DTB_BUILTIN
-	bool "Builtin device tree for the Kendryte K210"
-	depends on SOC_KENDRYTE
+config SOC_CANAAN_K210_DTB_BUILTIN
+	bool "Builtin device tree for the Canaan Kendryte K210"
+	depends on SOC_CANAAN
 	default y
 	select OF
 	select BUILTIN_DTB
-	select SOC_KENDRYTE_K210_DTB
 	help
-	  Builds a device tree for the Kendryte K210 into the Linux image.
+	  Build a device tree for the Kendryte K210 into the Linux image.
 	  This option should be selected if no bootloader is being used.
 	  If unsure, say Y.
 
+config SOC_CANAAN_K210_DTB_SOURCE
+	string "Source file for the Canaan Kendryte K210 builtin DTB"
+	depends on SOC_CANAAN
+	depends on SOC_CANAAN_K210_DTB_BUILTIN
+	default "k210_generic"
+	help
+	  Base name (without suffix, relative to arch/riscv/boot/dts/canaan)
+	  for the DTS file that will be used to produce the DTB linked into the
+	  kernel.
+
+endif
+
 endmenu

arch/riscv/Makefile

@@ -12,6 +12,8 @@ OBJCOPYFLAGS    := -O binary
 LDFLAGS_vmlinux :=
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
 	LDFLAGS_vmlinux := --no-relax
+	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+	CC_FLAGS_FTRACE := -fpatchable-function-entry=8
 endif
 
 ifeq ($(CONFIG_64BIT)$(CONFIG_CMODEL_MEDLOW),yy)
@@ -65,6 +67,16 @@ KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-relax)
 # architectures.  It's faster to have GCC emit only aligned accesses.
 KBUILD_CFLAGS += $(call cc-option,-mstrict-align)
 
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += -mstack-protector-guard=tls		  \
+				-mstack-protector-guard-reg=tp		  \
+				-mstack-protector-guard-offset=$(shell	  \
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
+					include/generated/asm-offsets.h))
+endif
+
 # arch specific predefines for sparse
 CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
 
@@ -83,7 +95,7 @@ PHONY += vdso_install
 vdso_install:
 	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
 
-ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
+ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
 KBUILD_IMAGE := $(boot)/loader.bin
 else
 KBUILD_IMAGE := $(boot)/Image.gz

arch/riscv/boot/dts/Makefile

 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
-subdir-y += kendryte
+subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
 
 obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))

arch/riscv/boot/dts/canaan/Makefile

+# SPDX-License-Identifier: GPL-2.0
+ifneq ($(CONFIG_SOC_CANAAN_K210_DTB_SOURCE),"")
+dtb-y += $(strip $(shell echo $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))).dtb
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+endif

arch/riscv/boot/dts/canaan/canaan_kd233.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte KD233";
+	compatible = "canaan,kendryte-kd233", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key0 {
+			label = "KEY0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(6, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(7, K210_PCF_SPI0_SCLK)>, /* wr */
+			 <K210_FPIOA(8, K210_PCF_GPIOHS21)>;  /* dc */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(11, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(12, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(13, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(14, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(15, K210_PCF_DVP_PCLK)>,
+			 <K210_FPIOA(17, K210_PCF_DVP_HSYNC)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(20, K210_PCF_GPIOHS4)>, /* Rot. dip sw line 8 */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>, /* Rot. dip sw line 4 */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>, /* Rot. dip sw line 2 */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>, /* Rot. dip sw line 1 */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(26, K210_PCF_GPIOHS10)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(29, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(30, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(31, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>; /* cs */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S0_IN_D0)>,
+			 <K210_FPIOA(34, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(35, K210_PCF_I2S0_SCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "ilitek,ili9341";
+		reg = <0>;
+		dc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};

arch/riscv/boot/dts/canaan/k210.dtsi

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+#include <dt-bindings/pinctrl/k210-fpioa.h>
+#include <dt-bindings/reset/k210-rst.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "canaan,kendryte-k210";
+
+	aliases {
+		serial0 = &uarths0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the privileged specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <0>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "canaan,k210", "riscv";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			mmu-type = "riscv,none";
+			i-cache-block-size = <64>;
+			i-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		compatible = "canaan,k210-sram";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+		clocks = <&sysclk K210_CLK_SRAM0>,
+			 <&sysclk K210_CLK_SRAM1>,
+			 <&sysclk K210_CLK_AI>;
+		clock-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		rom0: nvmem@1000 {
+			reg = <0x1000 0x1000>;
+			read-only;
+		};
+
+		clint0: timer@2000000 {
+			compatible = "canaan,k210-clint", "sifive,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					      &cpu1_intc 3 &cpu1_intc 7>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
+			reg = <0xC000000 0x4000000>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11 &cpu1_intc 11>;
+			riscv,ndev = <65>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "canaan,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysclk K210_CLK_CPU>;
+		};
+
+		gpio0: gpio-controller@38001000 {
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+			compatible = "canaan,k210-gpiohs", "sifive,gpio0";
+			reg = <0x38001000 0x1000>;
+			interrupt-controller;
+			interrupts = <34 35 36 37 38 39 40 41
+				      42 43 44 45 46 47 48 49
+				      50 51 52 53 54 55 56 57
+				      58 59 60 61 62 63 64 65>;
+			gpio-controller;
+			ngpios = <32>;
+		};
+
+		dmac0: dma-controller@50000000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x50000000 0x1000>;
+			interrupts = <27 28 29 30 31 32>;
+			#dma-cells = <1>;
+			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&sysrst K210_RST_DMA>;
+			dma-channels = <6>;
+			snps,dma-masters = <2>;
+			snps,priority = <0 1 2 3 4 5>;
+			snps,data-width = <5>;
+			snps,block-size = <0x200000 0x200000 0x200000
+					   0x200000 0x200000 0x200000>;
+			snps,axi-max-burst-len = <256>;
+		};
+
+		apb0: bus@50200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB0>;
+
+			gpio1: gpio@50200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x50200000 0x80>;
+				clocks = <&sysclk K210_CLK_APB0>,
+					 <&sysclk K210_CLK_GPIO>;
+				clock-names = "bus", "db";
+				resets = <&sysrst K210_RST_GPIO>;
+
+				gpio1_0: gpio-port@0 {
+					#gpio-cells = <2>;
+					#interrupt-cells = <2>;
+					compatible = "snps,dw-apb-gpio-port";
+					reg = <0>;
+					interrupt-controller;
+					interrupts = <23>;
+					gpio-controller;
+					ngpios = <8>;
+				};
+			};
+
+			uart1: serial@50210000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50210000 0x100>;
+				interrupts = <11>;
+				clocks = <&sysclk K210_CLK_UART1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART1>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart2: serial@50220000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50220000 0x100>;
+				interrupts = <12>;
+				clocks = <&sysclk K210_CLK_UART2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART2>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			uart3: serial@50230000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x50230000 0x100>;
+				interrupts = <13>;
+				clocks = <&sysclk K210_CLK_UART3>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "baudclk", "apb_pclk";
+				resets = <&sysrst K210_RST_UART3>;
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				dcd-override;
+				dsr-override;
+				cts-override;
+				ri-override;
+			};
+
+			spi2: spi@50240000 {
+				compatible = "canaan,k210-spi";
+				spi-slave;
+				reg = <0x50240000 0x100>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupts = <3>;
+				clocks = <&sysclk K210_CLK_SPI2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI2>;
+				spi-max-frequency = <25000000>;
+			};
+
+			i2s0: i2s@50250000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50250000 0x200>;
+				interrupts = <5>;
+				clocks = <&sysclk K210_CLK_I2S0>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S0>;
+			};
+
+			i2s1: i2s@50260000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50260000 0x200>;
+				interrupts = <6>;
+				clocks = <&sysclk K210_CLK_I2S1>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S1>;
+			};
+
+			i2s2: i2s@50270000 {
+				compatible = "snps,designware-i2s";
+				reg = <0x50270000 0x200>;
+				interrupts = <7>;
+				clocks = <&sysclk K210_CLK_I2S2>;
+				clock-names = "i2sclk";
+				resets = <&sysrst K210_RST_I2S2>;
+			};
+
+			i2c0: i2c@50280000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50280000 0x100>;
+				interrupts = <8>;
+				clocks = <&sysclk K210_CLK_I2C0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C0>;
+			};
+
+			i2c1: i2c@50290000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x50290000 0x100>;
+				interrupts = <9>;
+				clocks = <&sysclk K210_CLK_I2C1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C1>;
+			};
+
+			i2c2: i2c@502a0000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x502A0000 0x100>;
+				interrupts = <10>;
+				clocks = <&sysclk K210_CLK_I2C2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_I2C2>;
+			};
+
+			fpioa: pinmux@502b0000 {
+				compatible = "canaan,k210-fpioa";
+				reg = <0x502B0000 0x100>;
+				clocks = <&sysclk K210_CLK_FPIOA>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "ref", "pclk";
+				resets = <&sysrst K210_RST_FPIOA>;
+				canaan,k210-sysctl-power = <&sysctl 108>;
+			};
+
+			timer0: timer@502d0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502D0000 0x100>;
+				interrupts = <14 15>;
+				clocks = <&sysclk K210_CLK_TIMER0>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER0>;
+			};
+
+			timer1: timer@502e0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502E0000 0x100>;
+				interrupts = <16 17>;
+				clocks = <&sysclk K210_CLK_TIMER1>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER1>;
+			};
+
+			timer2: timer@502f0000 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x502F0000 0x100>;
+				interrupts = <18 19>;
+				clocks = <&sysclk K210_CLK_TIMER2>,
+					 <&sysclk K210_CLK_APB0>;
+				clock-names = "timer", "pclk";
+				resets = <&sysrst K210_RST_TIMER2>;
+			};
+		};
+
+		apb1: bus@50400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB1>;
+
+			wdt0: watchdog@50400000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50400000 0x100>;
+				interrupts = <21>;
+				clocks = <&sysclk K210_CLK_WDT0>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT0>;
+			};
+
+			wdt1: watchdog@50410000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x50410000 0x100>;
+				interrupts = <22>;
+				clocks = <&sysclk K210_CLK_WDT1>,
+					 <&sysclk K210_CLK_APB1>;
+				clock-names = "tclk", "pclk";
+				resets = <&sysrst K210_RST_WDT1>;
+			};
+
+			sysctl: syscon@50440000 {
+				compatible = "canaan,k210-sysctl",
+					     "syscon", "simple-mfd";
+				reg = <0x50440000 0x100>;
+				clocks = <&sysclk K210_CLK_APB1>;
+				clock-names = "pclk";
+
+				sysclk: clock-controller {
+					#clock-cells = <1>;
+					compatible = "canaan,k210-clk";
+					clocks = <&in0>;
+				};
+
+				sysrst: reset-controller {
+					compatible = "canaan,k210-rst";
+					#reset-cells = <1>;
+				};
+
+				reboot: syscon-reboot {
+					compatible = "syscon-reboot";
+					regmap = <&sysctl>;
+					offset = <48>;
+					mask = <1>;
+					value = <1>;
+				};
+			};
+		};
+
+		apb2: bus@52000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-pm-bus";
+			ranges;
+			clocks = <&sysclk K210_CLK_APB2>;
+
+			spi0: spi@52000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x52000000 0x100>;
+				interrupts = <1>;
+				clocks = <&sysclk K210_CLK_SPI0>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI0>;
+				reset-names = "spi";
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi1: spi@53000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "canaan,k210-spi";
+				reg = <0x53000000 0x100>;
+				interrupts = <2>;
+				clocks = <&sysclk K210_CLK_SPI1>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI1>;
+				reset-names = "spi";
+				spi-max-frequency = <25000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+
+			spi3: spi@54000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwc-ssi-1.01a";
+				reg = <0x54000000 0x200>;
+				interrupts = <4>;
+				clocks = <&sysclk K210_CLK_SPI3>,
+					 <&sysclk K210_CLK_APB2>;
+				clock-names = "ssi_clk", "pclk";
+				resets = <&sysrst K210_RST_SPI3>;
+				reset-names = "spi";
+				/* Could possibly go up to 200 MHz */
+				spi-max-frequency = <100000000>;
+				num-cs = <4>;
+				reg-io-width = <4>;
+			};
+		};
+	};
+};

arch/riscv/boot/dts/canaan/k210_generic.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pins: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pins: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

arch/riscv/boot/dts/canaan/sipeed_maix_bit.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX BiT";
+	compatible = "sipeed,maix-bit", "sipeed,maix-bitm",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-names = "default";
+	pinctrl-0 = <&jtag_pinctrl>;
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		spi-cs-high;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maix_dock.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX Dock";
+	compatible = "sipeed,maix-dock-m1", "sipeed,maix-dock-m1w",
+		     "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/*
+		 * Note: the board wiring drawing documents green on
+		 * gpio #4, red on gpio #5 and blue on gpio #6. However,
+		 * the board is actually wired differently as defined here.
+		 */
+		led0 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(9, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(10, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maix_go.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "SiPeed MAIX GO";
+	compatible = "sipeed,maix-go", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			color = <LED_COLOR_ID_GREEN>;
+			label = "green";
+			gpios = <&gpio1_0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			color = <LED_COLOR_ID_RED>;
+			label = "red";
+			gpios = <&gpio1_0 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			color = <LED_COLOR_ID_BLUE>;
+			label = "blue";
+			gpios = <&gpio1_0 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		up {
+			label = "UP";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1_0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		press {
+			label = "PRESS";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "DOWN";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fpioa {
+	pinctrl-0 = <&jtag_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	jtag_pinctrl: jtag-pinmux {
+		pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+			 <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+			 <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+			 <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+	};
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>,
+			 <K210_FPIOA(10, K210_PCF_GPIO2)>,
+			 <K210_FPIOA(11, K210_PCF_GPIO3)>,
+			 <K210_FPIOA(12, K210_PCF_GPIO4)>,
+			 <K210_FPIOA(13, K210_PCF_GPIO5)>,
+			 <K210_FPIOA(14, K210_PCF_GPIO6)>,
+			 <K210_FPIOA(15, K210_PCF_GPIO7)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,
+			 <K210_FPIOA(17, K210_PCF_GPIOHS1)>,
+			 <K210_FPIOA(21, K210_PCF_GPIOHS5)>,
+			 <K210_FPIOA(22, K210_PCF_GPIOHS6)>,
+			 <K210_FPIOA(23, K210_PCF_GPIOHS7)>,
+			 <K210_FPIOA(24, K210_PCF_GPIOHS8)>,
+			 <K210_FPIOA(25, K210_PCF_GPIOHS9)>,
+			 <K210_FPIOA(32, K210_PCF_GPIOHS16)>,
+			 <K210_FPIOA(33, K210_PCF_GPIOHS17)>,
+			 <K210_FPIOA(34, K210_PCF_GPIOHS18)>,
+			 <K210_FPIOA(35, K210_PCF_GPIOHS19)>;
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIOHS13)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>,
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		spi-max-frequency = <15000000>;
+		status = "disabled";
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/canaan/sipeed_maixduino.dts

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SiPeed MAIXDUINO";
+	compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		boot {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fpioa {
+	status = "okay";
+
+	uarths_pinctrl: uarths-pinmux {
+		pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
+			 <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
+	};
+
+	gpio_pinctrl: gpio-pinmux {
+		pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+			 <K210_FPIOA(9, K210_PCF_GPIO1)>;
+	};
+
+	gpiohs_pinctrl: gpiohs-pinmux {
+		pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>,  /* BOOT */
+			 <K210_FPIOA(21, K210_PCF_GPIOHS2)>,  /* Header "2" */
+			 <K210_FPIOA(22, K210_PCF_GPIOHS3)>,  /* Header "3" */
+			 <K210_FPIOA(23, K210_PCF_GPIOHS4)>,  /* Header "4" */
+			 <K210_FPIOA(24, K210_PCF_GPIOHS5)>,  /* Header "5" */
+			 <K210_FPIOA(32, K210_PCF_GPIOHS6)>,  /* Header "6" */
+			 <K210_FPIOA(15, K210_PCF_GPIOHS7)>,  /* Header "7" */
+			 <K210_FPIOA(14, K210_PCF_GPIOHS8)>,  /* Header "8" */
+			 <K210_FPIOA(13, K210_PCF_GPIOHS9)>,  /* Header "9" */
+			 <K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
+			 <K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
+			 <K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
+			 <K210_FPIOA(3,  K210_PCF_GPIOHS13)>; /* Header "13" */
+	};
+
+	i2s0_pinctrl: i2s0-pinmux {
+		pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+			 <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+			 <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+	};
+
+	spi1_pinctrl: spi1-pinmux {
+		pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+			 <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+			 <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+			 <K210_FPIOA(29, K210_PCF_GPIO2)>; /* cs */
+	};
+
+	i2c1_pinctrl: i2c1-pinmux {
+		pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
+			 <K210_FPIOA(31, K210_PCF_I2C1_SDA)>;  /* Header "sda" */
+	};
+
+	i2s1_pinctrl: i2s1-pinmux {
+		pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
+			 <K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
+			 <K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
+	};
+
+	spi0_pinctrl: spi0-pinmux {
+		pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>,  /* cs */
+			 <K210_FPIOA(37, K210_PCF_GPIOHS21)>,  /* rst */
+			 <K210_FPIOA(38, K210_PCF_GPIOHS22)>,  /* dc */
+			 <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+	};
+
+	dvp_pinctrl: dvp-pinmux {
+		pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+			 <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+			 <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+			 <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+			 <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+			 <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+			 <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+			 <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+	};
+};
+
+&uarths0 {
+	pinctrl-0 = <&uarths_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&gpiohs_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&gpio_pinctrl>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	#sound-dai-cells = <1>;
+	pinctrl-0 = <&i2s0_pinctrl>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pinctrl>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+	panel@0 {
+		compatible = "sitronix,st7789v";
+		reg = <0>;
+		reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		dc-gpios = <&gpio0 22 0>;
+		spi-max-frequency = <15000000>;
+		power-supply = <&vcc_3v3>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pinctrl>;
+	pinctrl-names = "default";
+	num-cs = <1>;
+	cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <25000000>;
+		broken-cd;
+	};
+};
+
+&spi3 {
+	spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		broken-flash-reset;
+	};
+};

arch/riscv/boot/dts/kendryte/Makefile

-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb
-
-obj-$(CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))

arch/riscv/boot/dts/kendryte/k210.dts

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-
-/dts-v1/;
-
-#include "k210.dtsi"
-
-/ {
-	model = "Kendryte K210 generic";
-	compatible = "kendryte,k210";
-
-	chosen {
-		bootargs = "earlycon console=ttySIF0";
-		stdout-path = "serial0";
-	};
-};
-
-&uarths0 {
-	status = "okay";
-};
-

arch/riscv/boot/dts/kendryte/k210.dtsi

-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-#include <dt-bindings/clock/k210-clk.h>
-
-/ {
-	/*
-	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
-	 * wide, and the upper half of all addresses is ignored.
-	 */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "kendryte,k210";
-
-	aliases {
-		serial0 = &uarths0;
-	};
-
-	/*
-	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
-	 * Since this is a non-ratified draft specification, the kernel does not
-	 * support it and the K210 support enabled only for the !MMU case.
-	 * Be consistent with this by setting the CPUs MMU type to "none".
-	 */
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		timebase-frequency = <7800000>;
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu0_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
-			riscv,isa = "rv64imafdc";
-			mmu-type = "none";
-			i-cache-size = <0x8000>;
-			i-cache-block-size = <64>;
-			d-cache-size = <0x8000>;
-			d-cache-block-size = <64>;
-			clocks = <&sysctl K210_CLK_CPU>;
-			clock-frequency = <390000000>;
-			cpu1_intc: interrupt-controller {
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				compatible = "riscv,cpu-intc";
-			};
-		};
-	};
-
-	sram: memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x400000>,
-		      <0x80400000 0x200000>,
-		      <0x80600000 0x200000>;
-		reg-names = "sram0", "sram1", "aisram";
-	};
-
-	clocks {
-		in0: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "kendryte,k210-soc", "simple-bus";
-		ranges;
-		interrupt-parent = <&plic0>;
-
-		sysctl: sysctl@50440000 {
-			compatible = "kendryte,k210-sysctl", "simple-mfd";
-			reg = <0x50440000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		clint0: clint@2000000 {
-			#interrupt-cells = <1>;
-			compatible = "riscv,clint0";
-			reg = <0x2000000 0xC000>;
-			interrupts-extended =  <&cpu0_intc 3 &cpu0_intc 7
-						&cpu1_intc 3 &cpu1_intc 7>;
-			clocks = <&sysctl K210_CLK_ACLK>;
-		};
-
-		plic0: interrupt-controller@c000000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "kendryte,k210-plic0", "riscv,plic0";
-			reg = <0xC000000 0x4000000>;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
-					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
-			riscv,ndev = <65>;
-			riscv,max-priority = <7>;
-		};
-
-		uarths0: serial@38000000 {
-			compatible = "kendryte,k210-uarths", "sifive,uart0";
-			reg = <0x38000000 0x1000>;
-			interrupts = <33>;
-			clocks = <&sysctl K210_CLK_CPU>;
-		};
-	};
-};

arch/riscv/boot/dts/sifive/Makefile

 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \
+			    hifive-unmatched-a00.dtb

arch/riscv/boot/dts/sifive/fu740-c000.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu740-c000", "sifive,fu740";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			compatible = "sifive,bullet0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			next-level-cache = <&ccache>;
+			reg = <0x0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu1: cpu@1 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu2: cpu@2 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu3: cpu@3 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+		cpu4: cpu@4 {
+			compatible = "sifive,bullet0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <40>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <40>;
+			mmu-type = "riscv,sv39";
+			next-level-cache = <&ccache>;
+			reg = <0x4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <69>;
+			interrupt-controller;
+			interrupts-extended = <
+				&cpu0_intc 0xffffffff
+				&cpu1_intc 0xffffffff &cpu1_intc 9
+				&cpu2_intc 0xffffffff &cpu2_intc 9
+				&cpu3_intc 0xffffffff &cpu3_intc 9
+				&cpu4_intc 0xffffffff &cpu4_intc 9>;
+		};
+		prci: clock-controller@10000000 {
+			compatible = "sifive,fu740-c000-prci";
+			reg = <0x0 0x10000000 0x0 0x1000>;
+			clocks = <&hfclk>, <&rtcclk>;
+			#clock-cells = <1>;
+		};
+		uart0: serial@10010000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10010000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <39>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		uart1: serial@10011000 {
+			compatible = "sifive,fu740-c000-uart", "sifive,uart0";
+			reg = <0x0 0x10011000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <40>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+		i2c0: i2c@10030000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10030000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <52>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		i2c1: i2c@10031000 {
+			compatible = "sifive,fu740-c000-i2c", "sifive,i2c0";
+			reg = <0x0 0x10031000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <53>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi0: spi@10040000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10040000 0x0 0x1000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <41>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		qspi1: spi@10041000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10041000 0x0 0x1000>,
+			      <0x0 0x30000000 0x0 0x10000000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <42>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		spi0: spi@10050000 {
+			compatible = "sifive,fu740-c000-spi", "sifive,spi0";
+			reg = <0x0 0x10050000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <43>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		eth0: ethernet@10090000 {
+			compatible = "sifive,fu540-c000-gem";
+			interrupt-parent = <&plic0>;
+			interrupts = <55>;
+			reg = <0x0 0x10090000 0x0 0x2000>,
+			      <0x0 0x100a0000 0x0 0x1000>;
+			local-mac-address = [00 00 00 00 00 00];
+			clock-names = "pclk", "hclk";
+			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
+				 <&prci PRCI_CLK_GEMGXLPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		pwm0: pwm@10020000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10020000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <44>, <45>, <46>, <47>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		pwm1: pwm@10021000 {
+			compatible = "sifive,fu740-c000-pwm", "sifive,pwm0";
+			reg = <0x0 0x10021000 0x0 0x1000>;
+			interrupt-parent = <&plic0>;
+			interrupts = <48>, <49>, <50>, <51>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+		ccache: cache-controller@2010000 {
+			compatible = "sifive,fu740-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <2048>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic0>;
+			interrupts = <19 20 21 22>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu740-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>,
+				     <30>, <31>, <32>, <33>, <34>, <35>, <36>,
+				     <37>, <38>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci PRCI_CLK_PCLK>;
+			status = "disabled";
+		};
+	};
+};

arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+#include "fu740-c000.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "SiFive HiFive Unmatched A00";
+	compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
+		     "sifive,fu740";
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	soc {
+	};
+
+	hfclk: hfclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-output-names = "hfclk";
+	};
+
+	rtcclk: rtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <RTCCLK_FREQ>;
+		clock-output-names = "rtcclk";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <5000000>;
+				regulator-max-microamp = <5000000>;
+				regulator-always-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <5000000>;
+				regulator-max-microamp = <5000000>;
+				regulator-always-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <2500000>;
+				regulator-max-microamp = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microamp = <1500000>;
+				regulator-max-microamp = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microamp = <3000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microamp = <3000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <100000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <100000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+
+			vdd_ld09: ldo9 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <300000>;
+				regulator-max-microamp = <300000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microamp = <300000>;
+				regulator-max-microamp = <300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&qspi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "issi,is25wp256", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	mmc@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3300 3300>;
+		disable-wp;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "gmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};

arch/riscv/configs/nommu_k210_defconfig

 # CONFIG_CPU_ISOLATION is not set
-CONFIG_LOG_BUF_SHIFT=15
+CONFIG_LOG_BUF_SHIFT=13
 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_FORCE=y
+# CONFIG_RD_GZIP is not set
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
 # CONFIG_RD_XZ is not set
 # CONFIG_RD_LZO is not set
 # CONFIG_RD_LZ4 is not set
+# CONFIG_RD_ZSTD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_FHANDLE is not set
 # CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
@@ -25,15 +27,17 @@ CONFIG_EMBEDDED=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
-# CONFIG_SLAB_MERGE_DEFAULT is not set
 # CONFIG_MMU is not set
-CONFIG_SOC_KENDRYTE=y
+CONFIG_SOC_CANAAN=y
+CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
 CONFIG_MAXPHYSMEM_2GB=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_CMDLINE="earlycon console=ttySIF0"
 CONFIG_CMDLINE_FORCE=y
-CONFIG_JUMP_LABEL=y
+# CONFIG_SECCOMP is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_GCC_PLUGINS is not set
 # CONFIG_BLOCK is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
@@ -41,23 +45,47 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_ALLOW_DEV_COREDUMP is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_LDISC_AUTOLOAD is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_DEVMEM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+# CONFIG_SPI_MEM is not set
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_USER=y
 # CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+# CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_LSM="[]"
 CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+# CONFIG_FRAME_POINTER is not set
 # CONFIG_DEBUG_MISC is not set
 CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set

arch/riscv/configs/nommu_k210_sdcard_defconfig

+# CONFIG_CPU_ISOLATION is not set
+CONFIG_LOG_BUF_SHIFT=13
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_MMU is not set
+CONFIG_SOC_CANAAN=y
+CONFIG_SOC_CANAAN_K210_DTB_SOURCE="k210_generic"
+CONFIG_MAXPHYSMEM_2GB=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro"
+CONFIG_CMDLINE_FORCE=y
+# CONFIG_SECCOMP is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+# CONFIG_SPI_MEM is not set
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SIFIVE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_PWRSEQ_EMMC is not set
+# CONFIG_PWRSEQ_SIMPLE is not set
+CONFIG_MMC_SPI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_USER=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_LSM="[]"
+CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_DEBUG_MISC is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set

arch/riscv/include/asm/bug.h

@@ -85,6 +85,7 @@ do {								\
 struct pt_regs;
 struct task_struct;
 
+void __show_regs(struct pt_regs *regs);
 void die(struct pt_regs *regs, const char *str);
 void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr);
 

arch/riscv/include/asm/csr.h

@@ -41,10 +41,16 @@
 #define SATP_PPN	_AC(0x003FFFFF, UL)
 #define SATP_MODE_32	_AC(0x80000000, UL)
 #define SATP_MODE	SATP_MODE_32
+#define SATP_ASID_BITS	9
+#define SATP_ASID_SHIFT	22
+#define SATP_ASID_MASK	_AC(0x1FF, UL)
 #else
 #define SATP_PPN	_AC(0x00000FFFFFFFFFFF, UL)
 #define SATP_MODE_39	_AC(0x8000000000000000, UL)
 #define SATP_MODE	SATP_MODE_39
+#define SATP_ASID_BITS	16
+#define SATP_ASID_SHIFT	44
+#define SATP_ASID_MASK	_AC(0xFFFF, UL)
 #endif
 
 /* Exception cause high bit - is an interrupt if set */

arch/riscv/include/asm/kasan.h

@@ -8,12 +8,28 @@
 
 #ifdef CONFIG_KASAN
 
+/*
+ * The following comment was copied from arm64:
+ * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
+ * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
+ * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
+ *
+ * KASAN_SHADOW_OFFSET:
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
+ * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
+ * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
+ *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
+ *                              (1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
+ */
 #define KASAN_SHADOW_SCALE_SHIFT	3
 
-#define KASAN_SHADOW_SIZE	(UL(1) << (38 - KASAN_SHADOW_SCALE_SHIFT))
-#define KASAN_SHADOW_START	KERN_VIRT_START /* 2^64 - 2^38 */
+#define KASAN_SHADOW_SIZE	(UL(1) << ((CONFIG_VA_BITS - 1) - KASAN_SHADOW_SCALE_SHIFT))
+#define KASAN_SHADOW_START	KERN_VIRT_START
 #define KASAN_SHADOW_END	(KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
-
 #define KASAN_SHADOW_OFFSET	(KASAN_SHADOW_END - (1ULL << \
 					(64 - KASAN_SHADOW_SCALE_SHIFT)))
 

arch/riscv/include/asm/kprobes.h

@@ -11,4 +11,44 @@
 
 #include <asm-generic/kprobes.h>
 
+#ifdef CONFIG_KPROBES
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+#include <asm/probes.h>
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* Single step context for kprobe */
+struct kprobe_step_ctx {
+	unsigned long ss_pending;
+	unsigned long match_addr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	unsigned long saved_status;
+	struct prev_kprobe prev_kprobe;
+	struct kprobe_step_ctx ss_ctx;
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr);
+bool kprobe_breakpoint_handler(struct pt_regs *regs);
+bool kprobe_single_step_handler(struct pt_regs *regs);
+void kretprobe_trampoline(void);
+void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
+
+#endif /* CONFIG_KPROBES */
 #endif /* _ASM_RISCV_KPROBES_H */

arch/riscv/include/asm/mmu.h

@@ -12,6 +12,8 @@
 typedef struct {
 #ifndef CONFIG_MMU
 	unsigned long	end_brk;
+#else
+	atomic_long_t id;
 #endif
 	void *vdso;
 #ifdef CONFIG_SMP

arch/riscv/include/asm/mmu_context.h

@@ -23,6 +23,16 @@ static inline void activate_mm(struct mm_struct *prev,
 	switch_mm(prev, next, NULL);
 }
 
+#define init_new_context init_new_context
+static inline int init_new_context(struct task_struct *tsk,
+			struct mm_struct *mm)
+{
+#ifdef CONFIG_MMU
+	atomic_long_set(&mm->context.id, 0);
+#endif
+	return 0;
+}
+
 #include <asm-generic/mmu_context.h>
 
 #endif /* _ASM_RISCV_MMU_CONTEXT_H */

arch/riscv/include/asm/mmzone.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/numa.h>
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[(nid)])
+
+#endif /* CONFIG_NUMA */
+#endif /* __ASM_MMZONE_H */

arch/riscv/include/asm/numa.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_NUMA_H
+#define __ASM_NUMA_H
+
+#include <asm/topology.h>
+#include <asm-generic/numa.h>
+
+#endif	/* __ASM_NUMA_H */

arch/riscv/include/asm/page.h

@@ -97,9 +97,6 @@ extern unsigned long pfn_base;
 #define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
 #endif /* CONFIG_MMU */
 
-extern unsigned long max_low_pfn;
-extern unsigned long min_low_pfn;
-
 #define __pa_to_va_nodebug(x)	((void *)((unsigned long) (x) + va_pa_offset))
 #define __va_to_pa_nodebug(x)	((unsigned long)(x) - va_pa_offset)
 

arch/riscv/include/asm/pci.h

@@ -32,6 +32,20 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 	/* always show the domain in /proc */
 	return 1;
 }
+
+#ifdef	CONFIG_NUMA
+
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return dev_to_node(&bus->dev);
+}
+#ifndef cpumask_of_pcibus
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ?		\
+				 cpu_all_mask :				\
+				 cpumask_of_node(pcibus_to_node(bus)))
+#endif
+#endif	/* CONFIG_NUMA */
+
 #endif  /* CONFIG_PCI */
 
 #endif  /* _ASM_RISCV_PCI_H */

arch/riscv/include/asm/pgtable.h

@@ -186,6 +186,11 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return (unsigned long)pfn_to_virt(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
 }
 
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
 /* Yields the page frame number (PFN) of a page table entry */
 static inline unsigned long pte_pfn(pte_t pte)
 {
@@ -289,6 +294,21 @@ static inline pte_t pte_mkhuge(pte_t pte)
 	return pte;
 }
 
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * See the comment in include/asm-generic/pgtable.h
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROT_NONE)) == _PAGE_PROT_NONE;
+}
+
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif
+
 /* Modify page protection bits */
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
@@ -468,6 +488,7 @@ extern void *dtb_early_va;
 extern uintptr_t dtb_early_pa;
 void setup_bootmem(void);
 void paging_init(void);
+void misc_mem_init(void);
 
 #define FIRST_USER_ADDRESS  0
 

arch/riscv/include/asm/probes.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_RISCV_PROBES_H
+#define _ASM_RISCV_PROBES_H
+
+typedef u32 probe_opcode_t;
+typedef bool (probes_handler_t) (u32 opcode, unsigned long addr, struct pt_regs *);
+
+/* architecture specific copy of original instruction */
+struct arch_probe_insn {
+	probe_opcode_t *insn;
+	probes_handler_t *handler;
+	/* restore address after simulation */
+	unsigned long restore;
+};
+
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
+
+#endif /* _ASM_RISCV_PROBES_H */

arch/riscv/include/asm/processor.h

@@ -34,6 +34,7 @@ struct thread_struct {
 	unsigned long sp;	/* Kernel mode stack */
 	unsigned long s[12];	/* s[0]: frame pointer */
 	struct __riscv_d_ext_state fstate;
+	unsigned long bad_cause;
 };
 
 #define INIT_THREAD {					\

arch/riscv/include/asm/ptrace.h

@@ -8,6 +8,7 @@
 
 #include <uapi/asm/ptrace.h>
 #include <asm/csr.h>
+#include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
 
@@ -60,6 +61,7 @@ struct pt_regs {
 
 #define user_mode(regs) (((regs)->status & SR_PP) == 0)
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, orig_a0)
 
 /* Helpers for working with the instruction pointer */
 static inline unsigned long instruction_pointer(struct pt_regs *regs)
@@ -85,6 +87,12 @@ static inline void user_stack_pointer_set(struct pt_regs *regs,
 	regs->sp =  val;
 }
 
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
 /* Helpers for working with the frame pointer */
 static inline unsigned long frame_pointer(struct pt_regs *regs)
 {
@@ -101,6 +109,33 @@ static inline unsigned long regs_return_value(struct pt_regs *regs)
 	return regs->a0;
 }
 
+static inline void regs_set_return_value(struct pt_regs *regs,
+					 unsigned long val)
+{
+	regs->a0 = val;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten
+ * @offset:	offset of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_RISCV_PTRACE_H */

arch/riscv/include/asm/sbi.h

@@ -89,7 +89,7 @@ struct sbiret {
 	long value;
 };
 
-int sbi_init(void);
+void sbi_init(void);
 struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg1, unsigned long arg2,
 			unsigned long arg3, unsigned long arg4,
@@ -100,13 +100,13 @@ int sbi_console_getchar(void);
 void sbi_set_timer(uint64_t stime_value);
 void sbi_shutdown(void);
 void sbi_clear_ipi(void);
-void sbi_send_ipi(const unsigned long *hart_mask);
-void sbi_remote_fence_i(const unsigned long *hart_mask);
-void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+int sbi_send_ipi(const unsigned long *hart_mask);
+int sbi_remote_fence_i(const unsigned long *hart_mask);
+int sbi_remote_sfence_vma(const unsigned long *hart_mask,
 			   unsigned long start,
 			   unsigned long size);
 
-void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+int sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 				unsigned long start,
 				unsigned long size,
 				unsigned long asid);
@@ -147,11 +147,7 @@ static inline unsigned long sbi_minor_version(void)
 
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
-/* stubs for code that is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
-void sbi_set_timer(uint64_t stime_value);
-void sbi_clear_ipi(void);
-void sbi_send_ipi(const unsigned long *hart_mask);
-void sbi_remote_fence_i(const unsigned long *hart_mask);
-void sbi_init(void);
+static inline int sbi_remote_fence_i(const unsigned long *hart_mask) { return -1; }
+static inline void sbi_init(void) {}
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */

arch/riscv/include/asm/set_memory.h

@@ -22,7 +22,7 @@ static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
-static inline void protect_kernel_text_data(void) {};
+static inline void protect_kernel_text_data(void) {}
 static inline int set_memory_rw_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 

arch/riscv/include/asm/soc.h

@@ -21,42 +21,4 @@ void soc_early_init(void);
 extern unsigned long __soc_early_init_table_start;
 extern unsigned long __soc_early_init_table_end;
 
-/*
- * Allows Linux to provide a device tree, which is necessary for SOCs that
- * don't provide a useful one on their own.
- */
-struct soc_builtin_dtb {
-	unsigned long vendor_id;
-	unsigned long arch_id;
-	unsigned long imp_id;
-	void *(*dtb_func)(void);
-};
-
-/*
- * The argument name must specify a valid DTS file name without the dts
- * extension.
- */
-#define SOC_BUILTIN_DTB_DECLARE(name, vendor, arch, impl)		\
-	extern void *__dtb_##name##_begin;				\
-									\
-	static __init __used						\
-	void *__soc_builtin_dtb_f__##name(void)				\
-	{								\
-		return (void *)&__dtb_##name##_begin;			\
-	}								\
-									\
-	static const struct soc_builtin_dtb __soc_builtin_dtb__##name	\
-		__used __section("__soc_builtin_dtb_table") =		\
-	{								\
-		.vendor_id = vendor,					\
-		.arch_id   = arch,					\
-		.imp_id    = impl,					\
-		.dtb_func  = __soc_builtin_dtb_f__##name,		\
-	}
-
-extern unsigned long __soc_builtin_dtb_table_start;
-extern unsigned long __soc_builtin_dtb_table_end;
-
-void *soc_lookup_builtin_dtb(void);
-
 #endif

arch/riscv/include/asm/stackprotector.h

@@ -24,6 +24,7 @@ static __always_inline void boot_init_stack_canary(void)
 	canary &= CANARY_MASK;
 
 	current->stack_canary = canary;
+	if (!IS_ENABLED(CONFIG_STACKPROTECTOR_PER_TASK))
 		__stack_chk_guard = current->stack_canary;
 }
 #endif /* _ASM_RISCV_STACKPROTECTOR_H */

arch/riscv/include/asm/stacktrace.h

@@ -13,5 +13,7 @@ struct stackframe {
 
 extern void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 				    bool (*fn)(void *, unsigned long), void *arg);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *task,
+			   const char *loglvl);
 
 #endif /* _ASM_RISCV_STACKTRACE_H */

arch/riscv/include/asm/thread_info.h

@@ -75,6 +75,7 @@ struct thread_info {
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing */
 #define TIF_SECCOMP		8	/* syscall secure computing */
 #define TIF_NOTIFY_SIGNAL	9	/* signal notifications exist */
+#define TIF_UPROBE		10	/* uprobe breakpoint or singlestep */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
@@ -84,10 +85,11 @@ struct thread_info {
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 
 #define _TIF_WORK_MASK \
 	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-	 _TIF_NOTIFY_SIGNAL)
+	 _TIF_NOTIFY_SIGNAL | _TIF_UPROBE)
 
 #define _TIF_SYSCALL_WORK \
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT | \

arch/riscv/include/asm/uprobes.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_RISCV_UPROBES_H
+#define _ASM_RISCV_UPROBES_H
+
+#include <asm/probes.h>
+#include <asm/patch.h>
+#include <asm/bug.h>
+
+#define MAX_UINSN_BYTES		8
+
+#ifdef CONFIG_RISCV_ISA_C
+#define UPROBE_SWBP_INSN	__BUG_INSN_16
+#define UPROBE_SWBP_INSN_SIZE	2
+#else
+#define UPROBE_SWBP_INSN	__BUG_INSN_32
+#define UPROBE_SWBP_INSN_SIZE	4
+#endif
+#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+
+typedef u32 uprobe_opcode_t;
+
+struct arch_uprobe_task {
+	unsigned long   saved_cause;
+};
+
+struct arch_uprobe {
+	union {
+		u8 insn[MAX_UINSN_BYTES];
+		u8 ixol[MAX_UINSN_BYTES];
+	};
+	struct arch_probe_insn api;
+	unsigned long insn_size;
+	bool simulate;
+};
+
+bool uprobe_breakpoint_handler(struct pt_regs *regs);
+bool uprobe_single_step_handler(struct pt_regs *regs);
+
+#endif /* _ASM_RISCV_UPROBES_H */

arch/riscv/kernel/Makefile

@@ -4,8 +4,9 @@
 #
 
 ifdef CONFIG_FTRACE
-CFLAGS_REMOVE_ftrace.o	= -pg
-CFLAGS_REMOVE_patch.o	= -pg
+CFLAGS_REMOVE_ftrace.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_patch.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_sbi.o	= $(CC_FLAGS_FTRACE)
 endif
 
 extra-y += head.o
@@ -29,6 +30,7 @@ obj-y	+= riscv_ksyms.o
 obj-y	+= stacktrace.o
 obj-y	+= cacheinfo.o
 obj-y	+= patch.o
+obj-y	+= probes/
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
 obj-$(CONFIG_RISCV_M_MODE)	+= traps_misaligned.o

arch/riscv/kernel/asm-offsets.c

@@ -68,6 +68,9 @@ void asm_offsets(void)
 	OFFSET(TASK_THREAD_F30, task_struct, thread.fstate.f[30]);
 	OFFSET(TASK_THREAD_F31, task_struct, thread.fstate.f[31]);
 	OFFSET(TASK_THREAD_FCSR, task_struct, thread.fstate.fcsr);
+#ifdef CONFIG_STACKPROTECTOR
+	OFFSET(TSK_STACK_CANARY, task_struct, stack_canary);
+#endif
 
 	DEFINE(PT_SIZE, sizeof(struct pt_regs));
 	OFFSET(PT_EPC, pt_regs, epc);

arch/riscv/kernel/ftrace.c

@@ -72,29 +72,56 @@ static int __ftrace_modify_call(unsigned long hook_pos, unsigned long target,
 	return 0;
 }
 
+/*
+ * Put 5 instructions with 16 bytes at the front of function within
+ * patchable function entry nops' area.
+ *
+ * 0: REG_S  ra, -SZREG(sp)
+ * 1: auipc  ra, 0x?
+ * 2: jalr   -?(ra)
+ * 3: REG_L  ra, -SZREG(sp)
+ *
+ * So the opcodes is:
+ * 0: 0xfe113c23 (sd)/0xfe112e23 (sw)
+ * 1: 0x???????? -> auipc
+ * 2: 0x???????? -> jalr
+ * 3: 0xff813083 (ld)/0xffc12083 (lw)
+ */
+#if __riscv_xlen == 64
+#define INSN0	0xfe113c23
+#define INSN3	0xff813083
+#elif __riscv_xlen == 32
+#define INSN0	0xfe112e23
+#define INSN3	0xffc12083
+#endif
+
+#define FUNC_ENTRY_SIZE	16
+#define FUNC_ENTRY_JMP	4
+
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
-	int ret = ftrace_check_current_call(rec->ip, NULL);
+	unsigned int call[4] = {INSN0, 0, 0, INSN3};
+	unsigned long target = addr;
+	unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
 
-	if (ret)
-		return ret;
+	call[1] = to_auipc_insn((unsigned int)(target - caller));
+	call[2] = to_jalr_insn((unsigned int)(target - caller));
 
-	return __ftrace_modify_call(rec->ip, addr, true);
+	if (patch_text_nosync((void *)rec->ip, call, FUNC_ENTRY_SIZE))
+		return -EPERM;
+
+	return 0;
 }
 
 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		    unsigned long addr)
 {
-	unsigned int call[2];
-	int ret;
+	unsigned int nops[4] = {NOP4, NOP4, NOP4, NOP4};
 
-	make_call(rec->ip, addr, call);
-	ret = ftrace_check_current_call(rec->ip, call);
-
-	if (ret)
-		return ret;
+	if (patch_text_nosync((void *)rec->ip, nops, FUNC_ENTRY_SIZE))
+		return -EPERM;
 
-	return __ftrace_modify_call(rec->ip, addr, false);
+	return 0;
 }
 
 
@@ -139,15 +166,16 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 		       unsigned long addr)
 {
 	unsigned int call[2];
+	unsigned long caller = rec->ip + FUNC_ENTRY_JMP;
 	int ret;
 
-	make_call(rec->ip, old_addr, call);
-	ret = ftrace_check_current_call(rec->ip, call);
+	make_call(caller, old_addr, call);
+	ret = ftrace_check_current_call(caller, call);
 
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call(rec->ip, addr, true);
+	return __ftrace_modify_call(caller, addr, true);
 }
 #endif
 
@@ -176,53 +204,30 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 extern void ftrace_graph_call(void);
+extern void ftrace_graph_regs_call(void);
 int ftrace_enable_ftrace_graph_caller(void)
 {
-	unsigned int call[2];
-	static int init_graph = 1;
 	int ret;
 
-	make_call(&ftrace_graph_call, &ftrace_stub, call);
-
-	/*
-	 * When enabling graph tracer for the first time, ftrace_graph_call
-	 * should contains a call to ftrace_stub.  Once it has been disabled,
-	 * the 8-bytes at the position becomes NOPs.
-	 */
-	if (init_graph) {
-		ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-						call);
-		init_graph = 0;
-	} else {
-		ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-						NULL);
-	}
-
+	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, true);
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
 				    (unsigned long)&prepare_ftrace_return, true);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	unsigned int call[2];
 	int ret;
 
-	make_call(&ftrace_graph_call, &prepare_ftrace_return, call);
-
-	/*
-	 * This is to make sure that ftrace_enable_ftrace_graph_caller
-	 * did the right thing.
-	 */
-	ret = ftrace_check_current_call((unsigned long)&ftrace_graph_call,
-					call);
-
+	ret = __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+				    (unsigned long)&prepare_ftrace_return, false);
 	if (ret)
 		return ret;
 
-	return __ftrace_modify_call((unsigned long)&ftrace_graph_call,
+	return __ftrace_modify_call((unsigned long)&ftrace_graph_regs_call,
 				    (unsigned long)&prepare_ftrace_return, false);
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/riscv/kernel/head.S

@@ -260,7 +260,11 @@ clear_bss_done:
 
 	/* Initialize page tables and relocate to virtual addresses */
 	la sp, init_thread_union + THREAD_SIZE
+#ifdef CONFIG_BUILTIN_DTB
+	la a0, __dtb_start
+#else
 	mv a0, s1
+#endif /* CONFIG_BUILTIN_DTB */
 	call setup_vm
 #ifdef CONFIG_MMU
 	la a0, early_pg_dir

arch/riscv/kernel/image-vars.h

@@ -3,7 +3,7 @@
  * Copyright (C) 2020 Western Digital Corporation or its affiliates.
  * Linker script variables to be set after section resolution, as
  * ld.lld does not like variables assigned before SECTIONS is processed.
- * Based on arch/arm64/kerne/image-vars.h
+ * Based on arch/arm64/kernel/image-vars.h
  */
 #ifndef __RISCV_KERNEL_IMAGE_VARS_H
 #define __RISCV_KERNEL_IMAGE_VARS_H

arch/riscv/kernel/mcount-dyn.S

@@ -13,224 +13,186 @@
 
 	.text
 
-	.macro SAVE_ABI_STATE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi    sp, sp, -48
-	sd      s0, 32(sp)
-	sd      ra, 40(sp)
-	addi    s0, sp, 48
-	sd      t0, 24(sp)
-	sd      t1, 16(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	sd      t2, 8(sp)
-#endif
-#else
-	addi	sp, sp, -16
-	sd	s0, 0(sp)
-	sd	ra, 8(sp)
-	addi	s0, sp, 16
-#endif
+#define FENTRY_RA_OFFSET	12
+#define ABI_SIZE_ON_STACK	72
+#define ABI_A0			0
+#define ABI_A1			8
+#define ABI_A2			16
+#define ABI_A3			24
+#define ABI_A4			32
+#define ABI_A5			40
+#define ABI_A6			48
+#define ABI_A7			56
+#define ABI_RA			64
+
+	.macro SAVE_ABI
+	addi	sp, sp, -SZREG
+	addi	sp, sp, -ABI_SIZE_ON_STACK
+
+	REG_S	a0, ABI_A0(sp)
+	REG_S	a1, ABI_A1(sp)
+	REG_S	a2, ABI_A2(sp)
+	REG_S	a3, ABI_A3(sp)
+	REG_S	a4, ABI_A4(sp)
+	REG_S	a5, ABI_A5(sp)
+	REG_S	a6, ABI_A6(sp)
+	REG_S	a7, ABI_A7(sp)
+	REG_S	ra, ABI_RA(sp)
 	.endm
 
-	.macro RESTORE_ABI_STATE
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ld	s0, 32(sp)
-	ld	ra, 40(sp)
-	addi	sp, sp, 48
-#else
-	ld	ra, 8(sp)
-	ld	s0, 0(sp)
-	addi	sp, sp, 16
-#endif
+	.macro RESTORE_ABI
+	REG_L	a0, ABI_A0(sp)
+	REG_L	a1, ABI_A1(sp)
+	REG_L	a2, ABI_A2(sp)
+	REG_L	a3, ABI_A3(sp)
+	REG_L	a4, ABI_A4(sp)
+	REG_L	a5, ABI_A5(sp)
+	REG_L	a6, ABI_A6(sp)
+	REG_L	a7, ABI_A7(sp)
+	REG_L	ra, ABI_RA(sp)
+
+	addi	sp, sp, ABI_SIZE_ON_STACK
+	addi	sp, sp, SZREG
 	.endm
 
-	.macro RESTORE_GRAPH_ARGS
-	ld	a0, 24(sp)
-	ld	a1, 16(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	a2, 8(sp)
-#endif
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	.macro SAVE_ALL
+	addi	sp, sp, -SZREG
+	addi	sp, sp, -PT_SIZE_ON_STACK
+
+	REG_S x1,  PT_EPC(sp)
+	addi	sp, sp, PT_SIZE_ON_STACK
+	REG_L x1,  (sp)
+	addi	sp, sp, -PT_SIZE_ON_STACK
+	REG_S x1,  PT_RA(sp)
+	REG_L x1,  PT_EPC(sp)
+
+	REG_S x2,  PT_SP(sp)
+	REG_S x3,  PT_GP(sp)
+	REG_S x4,  PT_TP(sp)
+	REG_S x5,  PT_T0(sp)
+	REG_S x6,  PT_T1(sp)
+	REG_S x7,  PT_T2(sp)
+	REG_S x8,  PT_S0(sp)
+	REG_S x9,  PT_S1(sp)
+	REG_S x10, PT_A0(sp)
+	REG_S x11, PT_A1(sp)
+	REG_S x12, PT_A2(sp)
+	REG_S x13, PT_A3(sp)
+	REG_S x14, PT_A4(sp)
+	REG_S x15, PT_A5(sp)
+	REG_S x16, PT_A6(sp)
+	REG_S x17, PT_A7(sp)
+	REG_S x18, PT_S2(sp)
+	REG_S x19, PT_S3(sp)
+	REG_S x20, PT_S4(sp)
+	REG_S x21, PT_S5(sp)
+	REG_S x22, PT_S6(sp)
+	REG_S x23, PT_S7(sp)
+	REG_S x24, PT_S8(sp)
+	REG_S x25, PT_S9(sp)
+	REG_S x26, PT_S10(sp)
+	REG_S x27, PT_S11(sp)
+	REG_S x28, PT_T3(sp)
+	REG_S x29, PT_T4(sp)
+	REG_S x30, PT_T5(sp)
+	REG_S x31, PT_T6(sp)
 	.endm
 
-ENTRY(ftrace_graph_caller)
-	addi	sp, sp, -16
-	sd	s0, 0(sp)
-	sd	ra, 8(sp)
-	addi	s0, sp, 16
-ftrace_graph_call:
-	.global ftrace_graph_call
-	/*
-	 * Calling ftrace_enable/disable_ftrace_graph_caller would overwrite the
-	 * call below.  Check ftrace_modify_all_code for details.
-	 */
-	call	ftrace_stub
-	ld	ra, 8(sp)
-	ld	s0, 0(sp)
-	addi	sp, sp, 16
-	ret
-ENDPROC(ftrace_graph_caller)
+	.macro RESTORE_ALL
+	REG_L x1,  PT_RA(sp)
+	addi	sp, sp, PT_SIZE_ON_STACK
+	REG_S x1,  (sp)
+	addi	sp, sp, -PT_SIZE_ON_STACK
+	REG_L x1,  PT_EPC(sp)
+	REG_L x2,  PT_SP(sp)
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
+	REG_L x10, PT_A0(sp)
+	REG_L x11, PT_A1(sp)
+	REG_L x12, PT_A2(sp)
+	REG_L x13, PT_A3(sp)
+	REG_L x14, PT_A4(sp)
+	REG_L x15, PT_A5(sp)
+	REG_L x16, PT_A6(sp)
+	REG_L x17, PT_A7(sp)
+	REG_L x18, PT_S2(sp)
+	REG_L x19, PT_S3(sp)
+	REG_L x20, PT_S4(sp)
+	REG_L x21, PT_S5(sp)
+	REG_L x22, PT_S6(sp)
+	REG_L x23, PT_S7(sp)
+	REG_L x24, PT_S8(sp)
+	REG_L x25, PT_S9(sp)
+	REG_L x26, PT_S10(sp)
+	REG_L x27, PT_S11(sp)
+	REG_L x28, PT_T3(sp)
+	REG_L x29, PT_T4(sp)
+	REG_L x30, PT_T5(sp)
+	REG_L x31, PT_T6(sp)
+
+	addi	sp, sp, PT_SIZE_ON_STACK
+	addi	sp, sp, SZREG
+	.endm
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 
 ENTRY(ftrace_caller)
-	/*
-	 * a0: the address in the caller when calling ftrace_caller
-	 * a1: the caller's return address
-	 * a2: the address of global variable function_trace_op
-	 */
-	ld	a1, -8(s0)
-	addi	a0, ra, -MCOUNT_INSN_SIZE
-	la	t5, function_trace_op
-	ld	a2, 0(t5)
+	SAVE_ABI
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/*
-	 * the graph tracer (specifically, prepare_ftrace_return) needs these
-	 * arguments but for now the function tracer occupies the regs, so we
-	 * save them in temporary regs to recover later.
-	 */
-	addi	t0, s0, -8
-	mv	t1, a0
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	t2, -16(s0)
-#endif
-#endif
+	addi	a0, ra, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	REG_L	a1, ABI_SIZE_ON_STACK(sp)
+	mv	a3, sp
 
-	SAVE_ABI_STATE
 ftrace_call:
 	.global ftrace_call
-	/*
-	 * For the dynamic ftrace to work, here we should reserve at least
-	 * 8 bytes for a functional auipc-jalr pair.  The following call
-	 * serves this purpose.
-	 *
-	 * Calling ftrace_update_ftrace_func would overwrite the nops below.
-	 * Check ftrace_modify_all_code for details.
-	 */
 	call	ftrace_stub
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	RESTORE_GRAPH_ARGS
-	call	ftrace_graph_caller
+	addi	a0, sp, ABI_SIZE_ON_STACK
+	REG_L	a1, ABI_RA(sp)
+	addi	a1, a1, -FENTRY_RA_OFFSET
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	mv	a2, s0
 #endif
-
-	RESTORE_ABI_STATE
+ftrace_graph_call:
+	.global ftrace_graph_call
+	call	ftrace_stub
+#endif
+	RESTORE_ABI
 	ret
 ENDPROC(ftrace_caller)
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	.macro SAVE_ALL
-	addi	sp, sp, -(PT_SIZE_ON_STACK+16)
-	sd	s0, (PT_SIZE_ON_STACK)(sp)
-	sd	ra, (PT_SIZE_ON_STACK+8)(sp)
-	addi	s0, sp, (PT_SIZE_ON_STACK+16)
-
-	sd x1,  PT_RA(sp)
-	sd x2,  PT_SP(sp)
-	sd x3,  PT_GP(sp)
-	sd x4,  PT_TP(sp)
-	sd x5,  PT_T0(sp)
-	sd x6,  PT_T1(sp)
-	sd x7,  PT_T2(sp)
-	sd x8,  PT_S0(sp)
-	sd x9,  PT_S1(sp)
-	sd x10, PT_A0(sp)
-	sd x11, PT_A1(sp)
-	sd x12, PT_A2(sp)
-	sd x13, PT_A3(sp)
-	sd x14, PT_A4(sp)
-	sd x15, PT_A5(sp)
-	sd x16, PT_A6(sp)
-	sd x17, PT_A7(sp)
-	sd x18, PT_S2(sp)
-	sd x19, PT_S3(sp)
-	sd x20, PT_S4(sp)
-	sd x21, PT_S5(sp)
-	sd x22, PT_S6(sp)
-	sd x23, PT_S7(sp)
-	sd x24, PT_S8(sp)
-	sd x25, PT_S9(sp)
-	sd x26, PT_S10(sp)
-	sd x27, PT_S11(sp)
-	sd x28, PT_T3(sp)
-	sd x29, PT_T4(sp)
-	sd x30, PT_T5(sp)
-	sd x31, PT_T6(sp)
-	.endm
-
-	.macro RESTORE_ALL
-	ld x1,  PT_RA(sp)
-	ld x2,  PT_SP(sp)
-	ld x3,  PT_GP(sp)
-	ld x4,  PT_TP(sp)
-	ld x5,  PT_T0(sp)
-	ld x6,  PT_T1(sp)
-	ld x7,  PT_T2(sp)
-	ld x8,  PT_S0(sp)
-	ld x9,  PT_S1(sp)
-	ld x10, PT_A0(sp)
-	ld x11, PT_A1(sp)
-	ld x12, PT_A2(sp)
-	ld x13, PT_A3(sp)
-	ld x14, PT_A4(sp)
-	ld x15, PT_A5(sp)
-	ld x16, PT_A6(sp)
-	ld x17, PT_A7(sp)
-	ld x18, PT_S2(sp)
-	ld x19, PT_S3(sp)
-	ld x20, PT_S4(sp)
-	ld x21, PT_S5(sp)
-	ld x22, PT_S6(sp)
-	ld x23, PT_S7(sp)
-	ld x24, PT_S8(sp)
-	ld x25, PT_S9(sp)
-	ld x26, PT_S10(sp)
-	ld x27, PT_S11(sp)
-	ld x28, PT_T3(sp)
-	ld x29, PT_T4(sp)
-	ld x30, PT_T5(sp)
-	ld x31, PT_T6(sp)
-
-	ld	s0, (PT_SIZE_ON_STACK)(sp)
-	ld	ra, (PT_SIZE_ON_STACK+8)(sp)
-	addi	sp, sp, (PT_SIZE_ON_STACK+16)
-	.endm
-
-	.macro RESTORE_GRAPH_REG_ARGS
-	ld	a0, PT_T0(sp)
-	ld	a1, PT_T1(sp)
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	a2, PT_T2(sp)
-#endif
-	.endm
-
-/*
- * Most of the contents are the same as ftrace_caller.
- */
 ENTRY(ftrace_regs_caller)
-	/*
-	 * a3: the address of all registers in the stack
-	 */
-	ld	a1, -8(s0)
-	addi	a0, ra, -MCOUNT_INSN_SIZE
-	la	t5, function_trace_op
-	ld	a2, 0(t5)
-	addi	a3, sp, -(PT_SIZE_ON_STACK+16)
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	t0, s0, -8
-	mv	t1, a0
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	ld	t2, -16(s0)
-#endif
-#endif
 	SAVE_ALL
 
+	addi	a0, ra, -FENTRY_RA_OFFSET
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)
+	REG_L	a1, PT_SIZE_ON_STACK(sp)
+	mv	a3, sp
+
 ftrace_regs_call:
 	.global ftrace_regs_call
 	call	ftrace_stub
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	RESTORE_GRAPH_REG_ARGS
-	call	ftrace_graph_caller
+	addi	a0, sp, PT_RA
+	REG_L	a1, PT_EPC(sp)
+	addi	a1, a1, -FENTRY_RA_OFFSET
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	mv	a2, s0
+#endif
+ftrace_graph_regs_call:
+	.global ftrace_graph_regs_call
+	call	ftrace_stub
 #endif
 
 	RESTORE_ALL

arch/riscv/kernel/patch.c

@@ -20,7 +20,12 @@ struct patch_insn {
 };
 
 #ifdef CONFIG_MMU
-static void *patch_map(void *addr, int fixmap)
+/*
+ * The fix_to_virt(, idx) needs a const value (not a dynamic variable of
+ * reg-a0) or BUILD_BUG_ON failed with "idx >= __end_of_fixed_addresses".
+ * So use '__always_inline' and 'const unsigned int fixmap' here.
+ */
+static __always_inline void *patch_map(void *addr, const unsigned int fixmap)
 {
 	uintptr_t uintaddr = (uintptr_t) addr;
 	struct page *page;
@@ -37,7 +42,6 @@ static void *patch_map(void *addr, int fixmap)
 	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
 					 (uintaddr & ~PAGE_MASK));
 }
-NOKPROBE_SYMBOL(patch_map);
 
 static void patch_unmap(int fixmap)
 {

arch/riscv/kernel/probes/Makefile

+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o simulate-insn.o
+obj-$(CONFIG_KPROBES)		+= kprobes_trampoline.o
+obj-$(CONFIG_KPROBES_ON_FTRACE)	+= ftrace.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o simulate-insn.o
+CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE)

arch/riscv/kernel/probes/decode-insn.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ */
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *api)
+{
+	probe_opcode_t insn = *addr;
+
+	/*
+	 * Reject instructions list:
+	 */
+	RISCV_INSN_REJECTED(system,		insn);
+	RISCV_INSN_REJECTED(fence,		insn);
+
+	/*
+	 * Simulate instructions list:
+	 * TODO: the REJECTED ones below need to be implemented
+	 */
+#ifdef CONFIG_RISCV_ISA_C
+	RISCV_INSN_REJECTED(c_j,		insn);
+	RISCV_INSN_REJECTED(c_jr,		insn);
+	RISCV_INSN_REJECTED(c_jal,		insn);
+	RISCV_INSN_REJECTED(c_jalr,		insn);
+	RISCV_INSN_REJECTED(c_beqz,		insn);
+	RISCV_INSN_REJECTED(c_bnez,		insn);
+	RISCV_INSN_REJECTED(c_ebreak,		insn);
+#endif
+
+	RISCV_INSN_REJECTED(auipc,		insn);
+	RISCV_INSN_REJECTED(branch,		insn);
+
+	RISCV_INSN_SET_SIMULATE(jal,		insn);
+	RISCV_INSN_SET_SIMULATE(jalr,		insn);
+
+	return INSN_GOOD;
+}

arch/riscv/kernel/probes/decode-insn.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+#define _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+
+#include <asm/sections.h>
+#include <asm/kprobes.h>
+
+enum probe_insn {
+	INSN_REJECTED,
+	INSN_GOOD_NO_SLOT,
+	INSN_GOOD,
+};
+
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *asi);
+
+#endif /* _RISCV_KERNEL_KPROBES_DECODE_INSN_H */

arch/riscv/kernel/probes/ftrace.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kprobes.h>
+
+/* Ftrace callback handler for kprobes -- called under preepmt disabed */
+void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
+			   struct ftrace_ops *ops, struct ftrace_regs *regs)
+{
+	struct kprobe *p;
+	struct kprobe_ctlblk *kcb;
+
+	p = get_kprobe((kprobe_opcode_t *)ip);
+	if (unlikely(!p) || kprobe_disabled(p))
+		return;
+
+	kcb = get_kprobe_ctlblk();
+	if (kprobe_running()) {
+		kprobes_inc_nmissed_count(p);
+	} else {
+		unsigned long orig_ip = instruction_pointer(&(regs->regs));
+
+		instruction_pointer_set(&(regs->regs), ip);
+
+		__this_cpu_write(current_kprobe, p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+		if (!p->pre_handler || !p->pre_handler(p, &(regs->regs))) {
+			/*
+			 * Emulate singlestep (and also recover regs->pc)
+			 * as if there is a nop
+			 */
+			instruction_pointer_set(&(regs->regs),
+				(unsigned long)p->addr + MCOUNT_INSN_SIZE);
+			if (unlikely(p->post_handler)) {
+				kcb->kprobe_status = KPROBE_HIT_SSDONE;
+				p->post_handler(p, &(regs->regs), 0);
+			}
+			instruction_pointer_set(&(regs->regs), orig_ip);
+		}
+
+		/*
+		 * If pre_handler returns !0, it changes regs->pc. We have to
+		 * skip emulating post_handler.
+		 */
+		__this_cpu_write(current_kprobe, NULL);
+	}
+}
+NOKPROBE_SYMBOL(kprobe_ftrace_handler);
+
+int arch_prepare_kprobe_ftrace(struct kprobe *p)
+{
+	p->ainsn.api.insn = NULL;
+	return 0;
+}

arch/riscv/kernel/probes/kprobes.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kprobes.h>
+#include <linux/extable.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <asm/ptrace.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
+#include <asm/cacheflush.h>
+#include <asm/bug.h>
+#include <asm/patch.h>
+
+#include "decode-insn.h"
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
+
+static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
+{
+	unsigned long offset = GET_INSN_LENGTH(p->opcode);
+
+	p->ainsn.api.restore = (unsigned long)p->addr + offset;
+
+	patch_text(p->ainsn.api.insn, p->opcode);
+	patch_text((void *)((unsigned long)(p->ainsn.api.insn) + offset),
+		   __BUG_INSN_32);
+}
+
+static void __kprobes arch_prepare_simulate(struct kprobe *p)
+{
+	p->ainsn.api.restore = 0;
+}
+
+static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (p->ainsn.api.handler)
+		p->ainsn.api.handler((u32)p->opcode,
+					(unsigned long)p->addr, regs);
+
+	post_kprobe_handler(kcb, regs);
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	unsigned long probe_addr = (unsigned long)p->addr;
+
+	if (probe_addr & 0x1) {
+		pr_warn("Address not aligned.\n");
+
+		return -EINVAL;
+	}
+
+	/* copy instruction */
+	p->opcode = *p->addr;
+
+	/* decode instruction */
+	switch (riscv_probe_decode_insn(p->addr, &p->ainsn.api)) {
+	case INSN_REJECTED:	/* insn not supported */
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:	/* insn need simulation */
+		p->ainsn.api.insn = NULL;
+		break;
+
+	case INSN_GOOD:	/* instruction uses slot */
+		p->ainsn.api.insn = get_insn_slot();
+		if (!p->ainsn.api.insn)
+			return -ENOMEM;
+		break;
+	}
+
+	/* prepare the instruction */
+	if (p->ainsn.api.insn)
+		arch_prepare_ss_slot(p);
+	else
+		arch_prepare_simulate(p);
+
+	return 0;
+}
+
+/* install breakpoint in text */
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	if ((p->opcode & __INSN_LENGTH_MASK) == __INSN_LENGTH_32)
+		patch_text(p->addr, __BUG_INSN_32);
+	else
+		patch_text(p->addr, __BUG_INSN_16);
+}
+
+/* remove breakpoint from text */
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	patch_text(p->addr, p->opcode);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * Interrupts need to be disabled before single-step mode is set, and not
+ * reenabled until after single-step mode ends.
+ * Without disabling interrupt on local CPU, there is a chance of
+ * interrupt occurrence in the period of exception return and  start of
+ * out-of-line single-step, that result in wrongly single stepping
+ * into the interrupt handler.
+ */
+static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	kcb->saved_status = regs->status;
+	regs->status &= ~SR_SPIE;
+}
+
+static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	regs->status = kcb->saved_status;
+}
+
+static void __kprobes
+set_ss_context(struct kprobe_ctlblk *kcb, unsigned long addr, struct kprobe *p)
+{
+	unsigned long offset = GET_INSN_LENGTH(p->opcode);
+
+	kcb->ss_ctx.ss_pending = true;
+	kcb->ss_ctx.match_addr = addr + offset;
+}
+
+static void __kprobes clear_ss_context(struct kprobe_ctlblk *kcb)
+{
+	kcb->ss_ctx.ss_pending = false;
+	kcb->ss_ctx.match_addr = 0;
+}
+
+static void __kprobes setup_singlestep(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb, int reenter)
+{
+	unsigned long slot;
+
+	if (reenter) {
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_REENTER;
+	} else {
+		kcb->kprobe_status = KPROBE_HIT_SS;
+	}
+
+	if (p->ainsn.api.insn) {
+		/* prepare for single stepping */
+		slot = (unsigned long)p->ainsn.api.insn;
+
+		set_ss_context(kcb, slot, p);	/* mark pending ss */
+
+		/* IRQs and single stepping do not mix well. */
+		kprobes_save_local_irqflag(kcb, regs);
+
+		instruction_pointer_set(regs, slot);
+	} else {
+		/* insn simulation */
+		arch_simulate_insn(p, regs);
+	}
+}
+
+static int __kprobes reenter_kprobe(struct kprobe *p,
+				    struct pt_regs *regs,
+				    struct kprobe_ctlblk *kcb)
+{
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SSDONE:
+	case KPROBE_HIT_ACTIVE:
+		kprobes_inc_nmissed_count(p);
+		setup_singlestep(p, regs, kcb, 1);
+		break;
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		pr_warn("Unrecoverable kprobe detected.\n");
+		dump_kprobe(p);
+		BUG();
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __kprobes
+post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+
+	if (!cur)
+		return;
+
+	/* return addr restore if non-branching insn */
+	if (cur->ainsn.api.restore != 0)
+		regs->epc = cur->ainsn.api.restore;
+
+	/* restore back original saved kprobe variables and continue */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		return;
+	}
+
+	/* call post handler */
+	kcb->kprobe_status = KPROBE_HIT_SSDONE;
+	if (cur->post_handler)	{
+		/* post_handler can hit breakpoint and single step
+		 * again, so we enable D-flag for recursive exception.
+		 */
+		cur->post_handler(cur, regs, 0);
+	}
+
+	reset_current_kprobe();
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe and the ip points back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		regs->epc = (unsigned long) cur->addr;
+		if (!instruction_pointer(regs))
+			BUG();
+
+		if (kcb->kprobe_status == KPROBE_REENTER)
+			restore_previous_kprobe(kcb);
+		else
+			reset_current_kprobe();
+
+		break;
+	case KPROBE_HIT_ACTIVE:
+	case KPROBE_HIT_SSDONE:
+		/*
+		 * We increment the nmissed count for accounting,
+		 * we can also use npre/npostfault count for accounting
+		 * these specific fault cases.
+		 */
+		kprobes_inc_nmissed_count(cur);
+
+		/*
+		 * We come here because instructions in the pre/post
+		 * handler caused the page_fault, this could happen
+		 * if handler tries to access user space by
+		 * copy_from_user(), get_user() etc. Let the
+		 * user-specified handler try to fix it first.
+		 */
+		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+			return 1;
+
+		/*
+		 * In case the user-specified fault handler returned
+		 * zero, try to fix up.
+		 */
+		if (fixup_exception(regs))
+			return 1;
+	}
+	return 0;
+}
+
+bool __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs)
+{
+	struct kprobe *p, *cur_kprobe;
+	struct kprobe_ctlblk *kcb;
+	unsigned long addr = instruction_pointer(regs);
+
+	kcb = get_kprobe_ctlblk();
+	cur_kprobe = kprobe_running();
+
+	p = get_kprobe((kprobe_opcode_t *) addr);
+
+	if (p) {
+		if (cur_kprobe) {
+			if (reenter_kprobe(p, regs, kcb))
+				return true;
+		} else {
+			/* Probe hit */
+			set_current_kprobe(p);
+			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+			/*
+			 * If we have no pre-handler or it returned 0, we
+			 * continue with normal processing.  If we have a
+			 * pre-handler and it returned non-zero, it will
+			 * modify the execution path and no need to single
+			 * stepping. Let's just reset current kprobe and exit.
+			 *
+			 * pre_handler can hit a breakpoint and can step thru
+			 * before return.
+			 */
+			if (!p->pre_handler || !p->pre_handler(p, regs))
+				setup_singlestep(p, regs, kcb, 0);
+			else
+				reset_current_kprobe();
+		}
+		return true;
+	}
+
+	/*
+	 * The breakpoint instruction was removed right
+	 * after we hit it.  Another cpu has removed
+	 * either a probepoint or a debugger breakpoint
+	 * at this address.  In either case, no further
+	 * handling of this interrupt is appropriate.
+	 * Return back to original instruction, and continue.
+	 */
+	return false;
+}
+
+bool __kprobes
+kprobe_single_step_handler(struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if ((kcb->ss_ctx.ss_pending)
+	    && (kcb->ss_ctx.match_addr == instruction_pointer(regs))) {
+		clear_ss_context(kcb);	/* clear pending ss */
+
+		kprobes_restore_local_irqflag(kcb, regs);
+
+		post_kprobe_handler(kcb, regs);
+		return true;
+	}
+	return false;
+}
+
+/*
+ * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
+ * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
+ */
+int __init arch_populate_kprobe_blacklist(void)
+{
+	int ret;
+
+	ret = kprobe_add_area_blacklist((unsigned long)__irqentry_text_start,
+					(unsigned long)__irqentry_text_end);
+	return ret;
+}
+
+void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
+{
+	return (void *)kretprobe_trampoline_handler(regs, &kretprobe_trampoline, NULL);
+}
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *)regs->ra;
+	ri->fp = NULL;
+	regs->ra = (unsigned long) &kretprobe_trampoline;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+	return 0;
+}

arch/riscv/kernel/probes/kprobes_trampoline.S

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Author: Patrick Stählin <me@packi.ch>
+ */
+#include <linux/linkage.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+
+	.text
+	.altmacro
+
+	.macro save_all_base_regs
+	REG_S x1,  PT_RA(sp)
+	REG_S x3,  PT_GP(sp)
+	REG_S x4,  PT_TP(sp)
+	REG_S x5,  PT_T0(sp)
+	REG_S x6,  PT_T1(sp)
+	REG_S x7,  PT_T2(sp)
+	REG_S x8,  PT_S0(sp)
+	REG_S x9,  PT_S1(sp)
+	REG_S x10, PT_A0(sp)
+	REG_S x11, PT_A1(sp)
+	REG_S x12, PT_A2(sp)
+	REG_S x13, PT_A3(sp)
+	REG_S x14, PT_A4(sp)
+	REG_S x15, PT_A5(sp)
+	REG_S x16, PT_A6(sp)
+	REG_S x17, PT_A7(sp)
+	REG_S x18, PT_S2(sp)
+	REG_S x19, PT_S3(sp)
+	REG_S x20, PT_S4(sp)
+	REG_S x21, PT_S5(sp)
+	REG_S x22, PT_S6(sp)
+	REG_S x23, PT_S7(sp)
+	REG_S x24, PT_S8(sp)
+	REG_S x25, PT_S9(sp)
+	REG_S x26, PT_S10(sp)
+	REG_S x27, PT_S11(sp)
+	REG_S x28, PT_T3(sp)
+	REG_S x29, PT_T4(sp)
+	REG_S x30, PT_T5(sp)
+	REG_S x31, PT_T6(sp)
+	.endm
+
+	.macro restore_all_base_regs
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
+	REG_L x10, PT_A0(sp)
+	REG_L x11, PT_A1(sp)
+	REG_L x12, PT_A2(sp)
+	REG_L x13, PT_A3(sp)
+	REG_L x14, PT_A4(sp)
+	REG_L x15, PT_A5(sp)
+	REG_L x16, PT_A6(sp)
+	REG_L x17, PT_A7(sp)
+	REG_L x18, PT_S2(sp)
+	REG_L x19, PT_S3(sp)
+	REG_L x20, PT_S4(sp)
+	REG_L x21, PT_S5(sp)
+	REG_L x22, PT_S6(sp)
+	REG_L x23, PT_S7(sp)
+	REG_L x24, PT_S8(sp)
+	REG_L x25, PT_S9(sp)
+	REG_L x26, PT_S10(sp)
+	REG_L x27, PT_S11(sp)
+	REG_L x28, PT_T3(sp)
+	REG_L x29, PT_T4(sp)
+	REG_L x30, PT_T5(sp)
+	REG_L x31, PT_T6(sp)
+	.endm
+
+ENTRY(kretprobe_trampoline)
+	addi sp, sp, -(PT_SIZE_ON_STACK)
+	save_all_base_regs
+
+	move a0, sp /* pt_regs */
+
+	call trampoline_probe_handler
+
+	/* use the result as the return-address */
+	move ra, a0
+
+	restore_all_base_regs
+	addi sp, sp, PT_SIZE_ON_STACK
+
+	ret
+ENDPROC(kretprobe_trampoline)

arch/riscv/kernel/probes/simulate-insn.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+static inline bool rv_insn_reg_get_val(struct pt_regs *regs, u32 index,
+				       unsigned long *ptr)
+{
+	if (index == 0)
+		*ptr = 0;
+	else if (index <= 31)
+		*ptr = *((unsigned long *)regs + index);
+	else
+		return false;
+
+	return true;
+}
+
+static inline bool rv_insn_reg_set_val(struct pt_regs *regs, u32 index,
+				       unsigned long val)
+{
+	if (index == 0)
+		return false;
+	else if (index <= 31)
+		*((unsigned long *)regs + index) = val;
+	else
+		return false;
+
+	return true;
+}
+
+bool __kprobes simulate_jal(u32 opcode, unsigned long addr, struct pt_regs *regs)
+{
+	/*
+	 *     31    30       21    20     19        12 11 7 6      0
+	 * imm [20] | imm[10:1] | imm[11] | imm[19:12] | rd | opcode
+	 *     1         10          1           8       5    JAL/J
+	 */
+	bool ret;
+	u32 imm;
+	u32 index = (opcode >> 7) & 0x1f;
+
+	ret = rv_insn_reg_set_val(regs, index, addr + 4);
+	if (!ret)
+		return ret;
+
+	imm  = ((opcode >> 21) & 0x3ff) << 1;
+	imm |= ((opcode >> 20) & 0x1)   << 11;
+	imm |= ((opcode >> 12) & 0xff)  << 12;
+	imm |= ((opcode >> 31) & 0x1)   << 20;
+
+	instruction_pointer_set(regs, addr + sign_extend32((imm), 20));
+
+	return ret;
+}
+
+bool __kprobes simulate_jalr(u32 opcode, unsigned long addr, struct pt_regs *regs)
+{
+	/*
+	 * 31          20 19 15 14 12 11 7 6      0
+	 *  offset[11:0] | rs1 | 010 | rd | opcode
+	 *      12         5      3    5    JALR/JR
+	 */
+	bool ret;
+	unsigned long base_addr;
+	u32 imm = (opcode >> 20) & 0xfff;
+	u32 rd_index = (opcode >> 7) & 0x1f;
+	u32 rs1_index = (opcode >> 15) & 0x1f;
+
+	ret = rv_insn_reg_set_val(regs, rd_index, addr + 4);
+	if (!ret)
+		return ret;
+
+	ret = rv_insn_reg_get_val(regs, rs1_index, &base_addr);
+	if (!ret)
+		return ret;
+
+	instruction_pointer_set(regs, (base_addr + sign_extend32((imm), 11))&~1);
+
+	return ret;
+}

arch/riscv/kernel/probes/simulate-insn.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RISCV_KERNEL_PROBES_SIMULATE_INSN_H
+#define _RISCV_KERNEL_PROBES_SIMULATE_INSN_H
+
+#define __RISCV_INSN_FUNCS(name, mask, val)				\
+static __always_inline bool riscv_insn_is_##name(probe_opcode_t code)	\
+{									\
+	BUILD_BUG_ON(~(mask) & (val));					\
+	return (code & (mask)) == (val);				\
+}									\
+bool simulate_##name(u32 opcode, unsigned long addr,			\
+		     struct pt_regs *regs)
+
+#define RISCV_INSN_REJECTED(name, code)					\
+	do {								\
+		if (riscv_insn_is_##name(code)) {			\
+			return INSN_REJECTED;				\
+		}							\
+	} while (0)
+
+__RISCV_INSN_FUNCS(system,	0x7f, 0x73);
+__RISCV_INSN_FUNCS(fence,	0x7f, 0x0f);
+
+#define RISCV_INSN_SET_SIMULATE(name, code)				\
+	do {								\
+		if (riscv_insn_is_##name(code)) {			\
+			api->handler = simulate_##name;			\
+			return INSN_GOOD_NO_SLOT;			\
+		}							\
+	} while (0)
+
+__RISCV_INSN_FUNCS(c_j,		0xe003, 0xa001);
+__RISCV_INSN_FUNCS(c_jr,	0xf007, 0x8002);
+__RISCV_INSN_FUNCS(c_jal,	0xe003, 0x2001);
+__RISCV_INSN_FUNCS(c_jalr,	0xf007, 0x9002);
+__RISCV_INSN_FUNCS(c_beqz,	0xe003, 0xc001);
+__RISCV_INSN_FUNCS(c_bnez,	0xe003, 0xe001);
+__RISCV_INSN_FUNCS(c_ebreak,	0xffff, 0x9002);
+
+__RISCV_INSN_FUNCS(auipc,	0x7f, 0x17);
+__RISCV_INSN_FUNCS(branch,	0x7f, 0x63);
+
+__RISCV_INSN_FUNCS(jal,		0x7f, 0x6f);
+__RISCV_INSN_FUNCS(jalr,	0x707f, 0x67);
+
+#endif /* _RISCV_KERNEL_PROBES_SIMULATE_INSN_H */

arch/riscv/kernel/probes/uprobes.c

+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+#include <linux/uprobes.h>
+
+#include "decode-insn.h"
+
+#define UPROBE_TRAP_NR	UINT_MAX
+
+bool is_swbp_insn(uprobe_opcode_t *insn)
+{
+#ifdef CONFIG_RISCV_ISA_C
+	return (*insn & 0xffff) == UPROBE_SWBP_INSN;
+#else
+	return *insn == UPROBE_SWBP_INSN;
+#endif
+}
+
+unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
+			     unsigned long addr)
+{
+	probe_opcode_t opcode;
+
+	opcode = *(probe_opcode_t *)(&auprobe->insn[0]);
+
+	auprobe->insn_size = GET_INSN_LENGTH(opcode);
+
+	switch (riscv_probe_decode_insn(&opcode, &auprobe->api)) {
+	case INSN_REJECTED:
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:
+		auprobe->simulate = true;
+		break;
+
+	case INSN_GOOD:
+		auprobe->simulate = false;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	utask->autask.saved_cause = current->thread.bad_cause;
+	current->thread.bad_cause = UPROBE_TRAP_NR;
+
+	instruction_pointer_set(regs, utask->xol_vaddr);
+
+	regs->status &= ~SR_SPIE;
+
+	return 0;
+}
+
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON_ONCE(current->thread.bad_cause != UPROBE_TRAP_NR);
+
+	instruction_pointer_set(regs, utask->vaddr + auprobe->insn_size);
+
+	regs->status |= SR_SPIE;
+
+	return 0;
+}
+
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	if (t->thread.bad_cause != UPROBE_TRAP_NR)
+		return true;
+
+	return false;
+}
+
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	probe_opcode_t insn;
+	unsigned long addr;
+
+	if (!auprobe->simulate)
+		return false;
+
+	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+	addr = instruction_pointer(regs);
+
+	if (auprobe->api.handler)
+		auprobe->api.handler(insn, addr, regs);
+
+	return true;
+}
+
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	/*
+	 * Task has received a fatal signal, so reset back to probbed
+	 * address.
+	 */
+	instruction_pointer_set(regs, utask->vaddr);
+
+	regs->status &= ~SR_SPIE;
+}
+
+bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
+		struct pt_regs *regs)
+{
+	if (ctx == RP_CHECK_CHAIN_CALL)
+		return regs->sp <= ret->stack;
+	else
+		return regs->sp < ret->stack;
+}
+
+unsigned long
+arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
+				  struct pt_regs *regs)
+{
+	unsigned long ra;
+
+	ra = regs->ra;
+
+	regs->ra = trampoline_vaddr;
+
+	return ra;
+}
+
+int arch_uprobe_exception_notify(struct notifier_block *self,
+				 unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
+
+bool uprobe_breakpoint_handler(struct pt_regs *regs)
+{
+	if (uprobe_pre_sstep_notifier(regs))
+		return true;
+
+	return false;
+}
+
+bool uprobe_single_step_handler(struct pt_regs *regs)
+{
+	if (uprobe_post_sstep_notifier(regs))
+		return true;
+
+	return false;
+}
+
+void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
+			   void *src, unsigned long len)
+{
+	/* Initialize the slot */
+	void *kaddr = kmap_atomic(page);
+	void *dst = kaddr + (vaddr & ~PAGE_MASK);
+
+	memcpy(dst, src, len);
+
+	/* Add ebreak behind opcode to simulate singlestep */
+	if (vaddr) {
+		dst += GET_INSN_LENGTH(*(probe_opcode_t *)src);
+		*(uprobe_opcode_t *)dst = __BUG_INSN_32;
+	}
+
+	kunmap_atomic(kaddr);
+
+	/*
+	 * We probably need flush_icache_user_page() but it needs vma.
+	 * This should work on most of architectures by default. If
+	 * architecture needs to do something different it can define
+	 * its own version of the function.
+	 */
+	flush_dcache_page(page);
+}

arch/riscv/kernel/process.c

@@ -18,13 +18,14 @@
 #include <asm/unistd.h>
 #include <asm/processor.h>
 #include <asm/csr.h>
+#include <asm/stacktrace.h>
 #include <asm/string.h>
 #include <asm/switch_to.h>
 #include <asm/thread_info.h>
 
 register unsigned long gp_in_global __asm__("gp");
 
-#ifdef CONFIG_STACKPROTECTOR
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 #include <linux/stackprotector.h>
 unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
@@ -39,11 +40,16 @@ void arch_cpu_idle(void)
 	raw_local_irq_enable();
 }
 
-void show_regs(struct pt_regs *regs)
+void __show_regs(struct pt_regs *regs)
 {
 	show_regs_print_info(KERN_DEFAULT);
 
-	pr_cont("epc: " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n",
+	if (!user_mode(regs)) {
+		pr_cont("epc : %pS\n", (void *)regs->epc);
+		pr_cont(" ra : %pS\n", (void *)regs->ra);
+	}
+
+	pr_cont("epc : " REG_FMT " ra : " REG_FMT " sp : " REG_FMT "\n",
 		regs->epc, regs->ra, regs->sp);
 	pr_cont(" gp : " REG_FMT " tp : " REG_FMT " t0 : " REG_FMT "\n",
 		regs->gp, regs->tp, regs->t0);
@@ -69,6 +75,12 @@ void show_regs(struct pt_regs *regs)
 	pr_cont("status: " REG_FMT " badaddr: " REG_FMT " cause: " REG_FMT "\n",
 		regs->status, regs->badaddr, regs->cause);
 }
+void show_regs(struct pt_regs *regs)
+{
+	__show_regs(regs);
+	if (!user_mode(regs))
+		dump_backtrace(regs, NULL, KERN_DEFAULT);
+}
 
 void start_thread(struct pt_regs *regs, unsigned long pc,
 	unsigned long sp)

arch/riscv/kernel/ptrace.c

@@ -114,6 +114,105 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 	return &riscv_user_native_view;
 }
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(epc),
+	REG_OFFSET_NAME(ra),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(gp),
+	REG_OFFSET_NAME(tp),
+	REG_OFFSET_NAME(t0),
+	REG_OFFSET_NAME(t1),
+	REG_OFFSET_NAME(t2),
+	REG_OFFSET_NAME(s0),
+	REG_OFFSET_NAME(s1),
+	REG_OFFSET_NAME(a0),
+	REG_OFFSET_NAME(a1),
+	REG_OFFSET_NAME(a2),
+	REG_OFFSET_NAME(a3),
+	REG_OFFSET_NAME(a4),
+	REG_OFFSET_NAME(a5),
+	REG_OFFSET_NAME(a6),
+	REG_OFFSET_NAME(a7),
+	REG_OFFSET_NAME(s2),
+	REG_OFFSET_NAME(s3),
+	REG_OFFSET_NAME(s4),
+	REG_OFFSET_NAME(s5),
+	REG_OFFSET_NAME(s6),
+	REG_OFFSET_NAME(s7),
+	REG_OFFSET_NAME(s8),
+	REG_OFFSET_NAME(s9),
+	REG_OFFSET_NAME(s10),
+	REG_OFFSET_NAME(s11),
+	REG_OFFSET_NAME(t3),
+	REG_OFFSET_NAME(t4),
+	REG_OFFSET_NAME(t5),
+	REG_OFFSET_NAME(t6),
+	REG_OFFSET_NAME(status),
+	REG_OFFSET_NAME(badaddr),
+	REG_OFFSET_NAME(cause),
+	REG_OFFSET_NAME(orig_a0),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 void ptrace_disable(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);

arch/riscv/kernel/sbi.c

@@ -351,7 +351,7 @@ static int __sbi_rfence_v02(int fid, const unsigned long *hart_mask,
  * sbi_set_timer() - Program the timer for next timer event.
  * @stime_value: The value after which next timer event should fire.
  *
- * Return: None
+ * Return: None.
  */
 void sbi_set_timer(uint64_t stime_value)
 {
@@ -362,11 +362,11 @@ void sbi_set_timer(uint64_t stime_value)
  * sbi_send_ipi() - Send an IPI to any hart.
  * @hart_mask: A cpu mask containing all the target harts.
  *
- * Return: None
+ * Return: 0 on success, appropriate linux error code otherwise.
  */
-void sbi_send_ipi(const unsigned long *hart_mask)
+int sbi_send_ipi(const unsigned long *hart_mask)
 {
-	__sbi_send_ipi(hart_mask);
+	return __sbi_send_ipi(hart_mask);
 }
 EXPORT_SYMBOL(sbi_send_ipi);
 
@@ -374,11 +374,11 @@ EXPORT_SYMBOL(sbi_send_ipi);
  * sbi_remote_fence_i() - Execute FENCE.I instruction on given remote harts.
  * @hart_mask: A cpu mask containing all the target harts.
  *
- * Return: None
+ * Return: 0 on success, appropriate linux error code otherwise.
  */
-void sbi_remote_fence_i(const unsigned long *hart_mask)
+int sbi_remote_fence_i(const unsigned long *hart_mask)
 {
-	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_FENCE_I,
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_FENCE_I,
 			    hart_mask, 0, 0, 0, 0);
 }
 EXPORT_SYMBOL(sbi_remote_fence_i);
@@ -390,13 +390,13 @@ EXPORT_SYMBOL(sbi_remote_fence_i);
  * @start: Start of the virtual address
  * @size: Total size of the virtual address range.
  *
- * Return: None
+ * Return: 0 on success, appropriate linux error code otherwise.
  */
-void sbi_remote_sfence_vma(const unsigned long *hart_mask,
+int sbi_remote_sfence_vma(const unsigned long *hart_mask,
 			   unsigned long start,
 			   unsigned long size)
 {
-	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
 			    hart_mask, start, size, 0, 0);
 }
 EXPORT_SYMBOL(sbi_remote_sfence_vma);
@@ -410,14 +410,14 @@ EXPORT_SYMBOL(sbi_remote_sfence_vma);
  * @size: Total size of the virtual address range.
  * @asid: The value of address space identifier (ASID).
  *
- * Return: None
+ * Return: 0 on success, appropriate linux error code otherwise.
  */
-void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
+int sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
 				unsigned long start,
 				unsigned long size,
 				unsigned long asid)
 {
-	__sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
+	return __sbi_rfence(SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
 			    hart_mask, start, size, asid, 0);
 }
 EXPORT_SYMBOL(sbi_remote_sfence_vma_asid);
@@ -560,7 +560,7 @@ static struct riscv_ipi_ops sbi_ipi_ops = {
 	.ipi_inject = sbi_send_cpumask_ipi
 };
 
-int __init sbi_init(void)
+void __init sbi_init(void)
 {
 	int ret;
 
@@ -600,6 +600,4 @@ int __init sbi_init(void)
 	}
 
 	riscv_set_ipi_ops(&sbi_ipi_ops);
-
-	return 0;
 }

arch/riscv/kernel/setup.c

@@ -216,8 +216,15 @@ static void __init init_resources(void)
 static void __init parse_dtb(void)
 {
 	/* Early scan of device tree from init memory */
-	if (early_init_dt_scan(dtb_early_va))
+	if (early_init_dt_scan(dtb_early_va)) {
+		const char *name = of_flat_dt_get_machine_name();
+
+		if (name) {
+			pr_info("Machine model: %s\n", name);
+			dump_stack_set_arch_desc("%s (DT)", name);
+		}
 		return;
+	}
 
 	pr_err("No DTB passed to the kernel\n");
 #ifdef CONFIG_CMDLINE_FORCE
@@ -252,8 +259,8 @@ void __init setup_arch(char **cmdline_p)
 	else
 		pr_err("No DTB found in kernel mappings\n");
 #endif
+	misc_mem_init();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
 	sbi_init();
 
 	if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX))
@@ -275,13 +282,19 @@ void __init setup_arch(char **cmdline_p)
 
 static int __init topology_init(void)
 {
-	int i;
+	int i, ret;
+
+	for_each_online_node(i)
+		register_one_node(i);
 
 	for_each_possible_cpu(i) {
 		struct cpu *cpu = &per_cpu(cpu_devices, i);
 
 		cpu->hotpluggable = cpu_has_hotplug(i);
-		register_cpu(cpu, i);
+		ret = register_cpu(cpu, i);
+		if (unlikely(ret))
+			pr_warn("Warning: %s: register_cpu %d failed (%d)\n",
+			       __func__, i, ret);
 	}
 
 	return 0;

arch/riscv/kernel/signal.c

@@ -309,6 +309,9 @@ static void do_signal(struct pt_regs *regs)
 asmlinkage __visible void do_notify_resume(struct pt_regs *regs,
 					   unsigned long thread_info_flags)
 {
+	if (thread_info_flags & _TIF_UPROBE)
+		uprobe_notify_resume(regs);
+
 	/* Handle pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
 		do_signal(regs);

arch/riscv/kernel/smpboot.c

@@ -27,6 +27,7 @@
 #include <asm/cpu_ops.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
+#include <asm/numa.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
 #include <asm/sbi.h>
@@ -45,13 +46,18 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpuid;
 	int ret;
+	unsigned int curr_cpuid;
+
+	curr_cpuid = smp_processor_id();
+	numa_store_cpu_info(curr_cpuid);
+	numa_add_cpu(curr_cpuid);
 
 	/* This covers non-smp usecase mandated by "nosmp" option */
 	if (max_cpus == 0)
 		return;
 
 	for_each_possible_cpu(cpuid) {
-		if (cpuid == smp_processor_id())
+		if (cpuid == curr_cpuid)
 			continue;
 		if (cpu_ops[cpuid]->cpu_prepare) {
 			ret = cpu_ops[cpuid]->cpu_prepare(cpuid);
@@ -59,6 +65,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 				continue;
 		}
 		set_cpu_present(cpuid, true);
+		numa_store_cpu_info(cpuid);
 	}
 }
 
@@ -79,6 +86,7 @@ void __init setup_smp(void)
 		if (hart == cpuid_to_hartid_map(0)) {
 			BUG_ON(found_boot_cpu);
 			found_boot_cpu = 1;
+			early_map_cpu_to_node(0, of_node_to_nid(dn));
 			continue;
 		}
 		if (cpuid >= NR_CPUS) {
@@ -88,6 +96,7 @@ void __init setup_smp(void)
 		}
 
 		cpuid_to_hartid_map(cpuid) = hart;
+		early_map_cpu_to_node(cpuid, of_node_to_nid(dn));
 		cpuid++;
 	}
 
@@ -153,6 +162,7 @@ asmlinkage __visible void smp_callin(void)
 	current->active_mm = mm;
 
 	notify_cpu_starting(curr_cpuid);
+	numa_add_cpu(curr_cpuid);
 	update_siblings_masks(curr_cpuid);
 	set_cpu_online(curr_cpuid, 1);
 

arch/riscv/kernel/soc.c

@@ -26,30 +26,3 @@ void __init soc_early_init(void)
 		}
 	}
 }
-
-static bool soc_builtin_dtb_match(unsigned long vendor_id,
-				unsigned long arch_id, unsigned long imp_id,
-				const struct soc_builtin_dtb *entry)
-{
-	return entry->vendor_id == vendor_id &&
-	       entry->arch_id == arch_id &&
-	       entry->imp_id == imp_id;
-}
-
-void * __init soc_lookup_builtin_dtb(void)
-{
-	unsigned long vendor_id, arch_id, imp_id;
-	const struct soc_builtin_dtb *s;
-
-	__asm__ ("csrr %0, mvendorid" : "=r"(vendor_id));
-	__asm__ ("csrr %0, marchid" : "=r"(arch_id));
-	__asm__ ("csrr %0, mimpid" : "=r"(imp_id));
-
-	for (s = (void *)&__soc_builtin_dtb_table_start;
-	     (void *)s < (void *)&__soc_builtin_dtb_table_end; s++) {
-		if (soc_builtin_dtb_match(vendor_id, arch_id, imp_id, s))
-			return s->dtb_func();
-	}
-
-	return NULL;
-}

arch/riscv/kernel/stacktrace.c

@@ -53,10 +53,16 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 		/* Unwind stack frame */
 		frame = (struct stackframe *)fp - 1;
 		sp = fp;
+		if (regs && (regs->epc == pc) && (frame->fp & 0x7)) {
+			fp = frame->ra;
+			pc = regs->ra;
+		} else {
 			fp = frame->fp;
 			pc = ftrace_graph_ret_addr(current, NULL, frame->ra,
 						   (unsigned long *)(fp - 8));
 		}
+
+	}
 }
 
 #else /* !CONFIG_FRAME_POINTER */
@@ -100,10 +106,16 @@ static bool print_trace_address(void *arg, unsigned long pc)
 	return true;
 }
 
+void dump_backtrace(struct pt_regs *regs, struct task_struct *task,
+		    const char *loglvl)
+{
+	pr_cont("%sCall Trace:\n", loglvl);
+	walk_stackframe(task, regs, print_trace_address, (void *)loglvl);
+}
+
 void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
-	pr_cont("Call Trace:\n");
-	walk_stackframe(task, NULL, print_trace_address, (void *)loglvl);
+	dump_backtrace(NULL, task, loglvl);
 }
 
 static bool save_wchan(void *arg, unsigned long pc)

arch/riscv/kernel/traps.c

@@ -12,10 +12,12 @@
 #include <linux/signal.h>
 #include <linux/kdebug.h>
 #include <linux/uaccess.h>
+#include <linux/kprobes.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/irq.h>
 
+#include <asm/bug.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/csr.h>
@@ -66,7 +68,7 @@ void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr)
 			tsk->comm, task_pid_nr(tsk), signo, code, addr);
 		print_vma_addr(KERN_CONT " in ", instruction_pointer(regs));
 		pr_cont("\n");
-		show_regs(regs);
+		__show_regs(regs);
 	}
 
 	force_sig_fault(signo, code, (void __user *)addr);
@@ -75,6 +77,8 @@ void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr)
 static void do_trap_error(struct pt_regs *regs, int signo, int code,
 	unsigned long addr, const char *str)
 {
+	current->thread.bad_cause = regs->cause;
+
 	if (user_mode(regs)) {
 		do_trap(regs, signo, code, addr);
 	} else {
@@ -145,6 +149,22 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
 
 asmlinkage __visible void do_trap_break(struct pt_regs *regs)
 {
+#ifdef CONFIG_KPROBES
+	if (kprobe_single_step_handler(regs))
+		return;
+
+	if (kprobe_breakpoint_handler(regs))
+		return;
+#endif
+#ifdef CONFIG_UPROBES
+	if (uprobe_single_step_handler(regs))
+		return;
+
+	if (uprobe_breakpoint_handler(regs))
+		return;
+#endif
+	current->thread.bad_cause = regs->cause;
+
 	if (user_mode(regs))
 		force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->epc);
 #ifdef CONFIG_KGDB

arch/riscv/kernel/vdso/Makefile

@@ -32,9 +32,10 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 # Disable -pg to prevent insert call site
 CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
 
-# Disable gcov profiling for VDSO code
+# Disable profiling and instrumentation for VDSO code
 GCOV_PROFILE := n
 KCOV_INSTRUMENT := n
+KASAN_SANITIZE := n
 
 # Force dependency
 $(obj)/vdso.o: $(obj)/vdso.so

arch/riscv/lib/Makefile

@@ -5,3 +5,5 @@ lib-y			+= memset.o
 lib-y			+= memmove.o
 lib-$(CONFIG_MMU)	+= uaccess.o
 lib-$(CONFIG_64BIT)	+= tishift.o
+
+obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o

arch/riscv/lib/error-inject.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/error-injection.h>
+#include <linux/kprobes.h>
+
+void override_function_with_return(struct pt_regs *regs)
+{
+	instruction_pointer_set(regs, regs->ra);
+}
+NOKPROBE_SYMBOL(override_function_with_return);

arch/riscv/mm/Makefile

@@ -2,7 +2,8 @@
 
 CFLAGS_init.o := -mcmodel=medany
 ifdef CONFIG_FTRACE
-CFLAGS_REMOVE_init.o = -pg
+CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)
 endif
 
 KCOV_INSTRUMENT_init.o := n

arch/riscv/mm/context.c

@@ -2,13 +2,273 @@
 /*
  * Copyright (C) 2012 Regents of the University of California
  * Copyright (C) 2017 SiFive
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
  */
 
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
 #include <linux/mm.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/static_key.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
 
+#ifdef CONFIG_MMU
+
+static DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
+
+static unsigned long asid_bits;
+static unsigned long num_asids;
+static unsigned long asid_mask;
+
+static atomic_long_t current_version;
+
+static DEFINE_RAW_SPINLOCK(context_lock);
+static cpumask_t context_tlb_flush_pending;
+static unsigned long *context_asid_map;
+
+static DEFINE_PER_CPU(atomic_long_t, active_context);
+static DEFINE_PER_CPU(unsigned long, reserved_context);
+
+static bool check_update_reserved_context(unsigned long cntx,
+					  unsigned long newcntx)
+{
+	int cpu;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved CONTEXT looking for a match.
+	 * If we find one, then we can update our mm to use new CONTEXT
+	 * (i.e. the same CONTEXT in the current_version) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old CONTEXT are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved CONTEXT in a future
+	 * version.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_context, cpu) == cntx) {
+			hit = true;
+			per_cpu(reserved_context, cpu) = newcntx;
+		}
+	}
+
+	return hit;
+}
+
+static void __flush_context(void)
+{
+	int i;
+	unsigned long cntx;
+
+	/* Must be called with context_lock held */
+	lockdep_assert_held(&context_lock);
+
+	/* Update the list of reserved ASIDs and the ASID bitmap. */
+	bitmap_clear(context_asid_map, 0, num_asids);
+
+	/* Mark already active ASIDs as used */
+	for_each_possible_cpu(i) {
+		cntx = atomic_long_xchg_relaxed(&per_cpu(active_context, i), 0);
+		/*
+		 * If this CPU has already been through a rollover, but
+		 * hasn't run another task in the meantime, we must preserve
+		 * its reserved CONTEXT, as this is the only trace we have of
+		 * the process it is still running.
+		 */
+		if (cntx == 0)
+			cntx = per_cpu(reserved_context, i);
+
+		__set_bit(cntx & asid_mask, context_asid_map);
+		per_cpu(reserved_context, i) = cntx;
+	}
+
+	/* Mark ASID #0 as used because it is used at boot-time */
+	__set_bit(0, context_asid_map);
+
+	/* Queue a TLB invalidation for each CPU on next context-switch */
+	cpumask_setall(&context_tlb_flush_pending);
+}
+
+static unsigned long __new_context(struct mm_struct *mm)
+{
+	static u32 cur_idx = 1;
+	unsigned long cntx = atomic_long_read(&mm->context.id);
+	unsigned long asid, ver = atomic_long_read(&current_version);
+
+	/* Must be called with context_lock held */
+	lockdep_assert_held(&context_lock);
+
+	if (cntx != 0) {
+		unsigned long newcntx = ver | (cntx & asid_mask);
+
+		/*
+		 * If our current CONTEXT was active during a rollover, we
+		 * can continue to use it and this was just a false alarm.
+		 */
+		if (check_update_reserved_context(cntx, newcntx))
+			return newcntx;
+
+		/*
+		 * We had a valid CONTEXT in a previous life, so try to
+		 * re-use it if possible.
+		 */
+		if (!__test_and_set_bit(cntx & asid_mask, context_asid_map))
+			return newcntx;
+	}
+
+	/*
+	 * Allocate a free ASID. If we can't find one then increment
+	 * current_version and flush all ASIDs.
+	 */
+	asid = find_next_zero_bit(context_asid_map, num_asids, cur_idx);
+	if (asid != num_asids)
+		goto set_asid;
+
+	/* We're out of ASIDs, so increment current_version */
+	ver = atomic_long_add_return_relaxed(num_asids, &current_version);
+
+	/* Flush everything  */
+	__flush_context();
+
+	/* We have more ASIDs than CPUs, so this will always succeed */
+	asid = find_next_zero_bit(context_asid_map, num_asids, 1);
+
+set_asid:
+	__set_bit(asid, context_asid_map);
+	cur_idx = asid;
+	return asid | ver;
+}
+
+static void set_mm_asid(struct mm_struct *mm, unsigned int cpu)
+{
+	unsigned long flags;
+	bool need_flush_tlb = false;
+	unsigned long cntx, old_active_cntx;
+
+	cntx = atomic_long_read(&mm->context.id);
+
+	/*
+	 * If our active_context is non-zero and the context matches the
+	 * current_version, then we update the active_context entry with a
+	 * relaxed cmpxchg.
+	 *
+	 * Following is how we handle racing with a concurrent rollover:
+	 *
+	 * - We get a zero back from the cmpxchg and end up waiting on the
+	 *   lock. Taking the lock synchronises with the rollover and so
+	 *   we are forced to see the updated verion.
+	 *
+	 * - We get a valid context back from the cmpxchg then we continue
+	 *   using old ASID because __flush_context() would have marked ASID
+	 *   of active_context as used and next context switch we will
+	 *   allocate new context.
+	 */
+	old_active_cntx = atomic_long_read(&per_cpu(active_context, cpu));
+	if (old_active_cntx &&
+	    ((cntx & ~asid_mask) == atomic_long_read(&current_version)) &&
+	    atomic_long_cmpxchg_relaxed(&per_cpu(active_context, cpu),
+					old_active_cntx, cntx))
+		goto switch_mm_fast;
+
+	raw_spin_lock_irqsave(&context_lock, flags);
+
+	/* Check that our ASID belongs to the current_version. */
+	cntx = atomic_long_read(&mm->context.id);
+	if ((cntx & ~asid_mask) != atomic_long_read(&current_version)) {
+		cntx = __new_context(mm);
+		atomic_long_set(&mm->context.id, cntx);
+	}
+
+	if (cpumask_test_and_clear_cpu(cpu, &context_tlb_flush_pending))
+		need_flush_tlb = true;
+
+	atomic_long_set(&per_cpu(active_context, cpu), cntx);
+
+	raw_spin_unlock_irqrestore(&context_lock, flags);
+
+switch_mm_fast:
+	csr_write(CSR_SATP, virt_to_pfn(mm->pgd) |
+		  ((cntx & asid_mask) << SATP_ASID_SHIFT) |
+		  SATP_MODE);
+
+	if (need_flush_tlb)
+		local_flush_tlb_all();
+}
+
+static void set_mm_noasid(struct mm_struct *mm)
+{
+	/* Switch the page table and blindly nuke entire local TLB */
+	csr_write(CSR_SATP, virt_to_pfn(mm->pgd) | SATP_MODE);
+	local_flush_tlb_all();
+}
+
+static inline void set_mm(struct mm_struct *mm, unsigned int cpu)
+{
+	if (static_branch_unlikely(&use_asid_allocator))
+		set_mm_asid(mm, cpu);
+	else
+		set_mm_noasid(mm);
+}
+
+static int asids_init(void)
+{
+	unsigned long old;
+
+	/* Figure-out number of ASID bits in HW */
+	old = csr_read(CSR_SATP);
+	asid_bits = old | (SATP_ASID_MASK << SATP_ASID_SHIFT);
+	csr_write(CSR_SATP, asid_bits);
+	asid_bits = (csr_read(CSR_SATP) >> SATP_ASID_SHIFT)  & SATP_ASID_MASK;
+	asid_bits = fls_long(asid_bits);
+	csr_write(CSR_SATP, old);
+
+	/*
+	 * In the process of determining number of ASID bits (above)
+	 * we polluted the TLB of current HART so let's do TLB flushed
+	 * to remove unwanted TLB enteries.
+	 */
+	local_flush_tlb_all();
+
+	/* Pre-compute ASID details */
+	num_asids = 1 << asid_bits;
+	asid_mask = num_asids - 1;
+
+	/*
+	 * Use ASID allocator only if number of HW ASIDs are
+	 * at-least twice more than CPUs
+	 */
+	if (num_asids > (2 * num_possible_cpus())) {
+		atomic_long_set(&current_version, num_asids);
+
+		context_asid_map = kcalloc(BITS_TO_LONGS(num_asids),
+				   sizeof(*context_asid_map), GFP_KERNEL);
+		if (!context_asid_map)
+			panic("Failed to allocate bitmap for %lu ASIDs\n",
+			      num_asids);
+
+		__set_bit(0, context_asid_map);
+
+		static_branch_enable(&use_asid_allocator);
+
+		pr_info("ASID allocator using %lu bits (%lu entries)\n",
+			asid_bits, num_asids);
+	} else {
+		pr_info("ASID allocator disabled\n");
+	}
+
+	return 0;
+}
+early_initcall(asids_init);
+#else
+static inline void set_mm(struct mm_struct *mm, unsigned int cpu)
+{
+	/* Nothing to do here when there is no MMU */
+}
+#endif
+
 /*
  * When necessary, performs a deferred icache flush for the given MM context,
  * on the local CPU.  RISC-V has no direct mechanism for instruction cache
@@ -58,10 +318,7 @@ void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	cpumask_set_cpu(cpu, mm_cpumask(next));
 
-#ifdef CONFIG_MMU
-	csr_write(CSR_SATP, virt_to_pfn(next->pgd) | SATP_MODE);
-	local_flush_tlb_all();
-#endif
+	set_mm(next, cpu);
 
 	flush_icache_deferred(next);
 }

arch/riscv/mm/fault.c

@@ -13,14 +13,30 @@
 #include <linux/perf_event.h>
 #include <linux/signal.h>
 #include <linux/uaccess.h>
+#include <linux/kprobes.h>
 
 #include <asm/ptrace.h>
 #include <asm/tlbflush.h>
 
 #include "../kernel/head.h"
 
+static void die_kernel_fault(const char *msg, unsigned long addr,
+		struct pt_regs *regs)
+{
+	bust_spinlocks(1);
+
+	pr_alert("Unable to handle kernel %s at virtual address " REG_FMT "\n", msg,
+		addr);
+
+	bust_spinlocks(0);
+	die(regs, "Oops");
+	do_exit(SIGKILL);
+}
+
 static inline void no_context(struct pt_regs *regs, unsigned long addr)
 {
+	const char *msg;
+
 	/* Are we prepared to handle this kernel fault? */
 	if (fixup_exception(regs))
 		return;
@@ -29,12 +45,8 @@ static inline void no_context(struct pt_regs *regs, unsigned long addr)
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-	bust_spinlocks(1);
-	pr_alert("Unable to handle kernel %s at virtual address " REG_FMT "\n",
-		(addr < PAGE_SIZE) ? "NULL pointer dereference" :
-		"paging request", addr);
-	die(regs, "Oops");
-	do_exit(SIGKILL);
+	msg = (addr < PAGE_SIZE) ? "NULL pointer dereference" : "paging request";
+	die_kernel_fault(msg, addr, regs);
 }
 
 static inline void mm_fault_error(struct pt_regs *regs, unsigned long addr, vm_fault_t fault)
@@ -202,6 +214,9 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	tsk = current;
 	mm = tsk->mm;
 
+	if (kprobe_page_fault(regs, cause))
+		return;
+
 	/*
 	 * Fault-in kernel-space virtual memory on-demand.
 	 * The 'reference' page table is init_mm.pgd.
@@ -225,6 +240,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	 * in an atomic region, then we must not take the fault.
 	 */
 	if (unlikely(faulthandler_disabled() || !mm)) {
+		tsk->thread.bad_cause = cause;
 		no_context(regs, addr);
 		return;
 	}
@@ -232,6 +248,11 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
 
+	if (!user_mode(regs) && addr < TASK_SIZE &&
+			unlikely(!(regs->status & SR_SUM)))
+		die_kernel_fault("access to user memory without uaccess routines",
+				addr, regs);
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
 
 	if (cause == EXC_STORE_PAGE_FAULT)
@@ -242,16 +263,19 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	mmap_read_lock(mm);
 	vma = find_vma(mm, addr);
 	if (unlikely(!vma)) {
+		tsk->thread.bad_cause = cause;
 		bad_area(regs, mm, code, addr);
 		return;
 	}
 	if (likely(vma->vm_start <= addr))
 		goto good_area;
 	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) {
+		tsk->thread.bad_cause = cause;
 		bad_area(regs, mm, code, addr);
 		return;
 	}
 	if (unlikely(expand_stack(vma, addr))) {
+		tsk->thread.bad_cause = cause;
 		bad_area(regs, mm, code, addr);
 		return;
 	}
@@ -264,6 +288,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	code = SEGV_ACCERR;
 
 	if (unlikely(access_error(cause, vma))) {
+		tsk->thread.bad_cause = cause;
 		bad_area(regs, mm, code, addr);
 		return;
 	}
@@ -297,6 +322,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs)
 	mmap_read_unlock(mm);
 
 	if (unlikely(fault & VM_FAULT_ERROR)) {
+		tsk->thread.bad_cause = cause;
 		mm_fault_error(regs, addr, fault);
 		return;
 	}

arch/riscv/mm/init.c

@@ -21,6 +21,7 @@
 #include <asm/soc.h>
 #include <asm/io.h>
 #include <asm/ptdump.h>
+#include <asm/numa.h>
 
 #include "../kernel/head.h"
 
@@ -105,55 +106,6 @@ void __init mem_init(void)
 	print_vm_layout();
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-static void __init setup_initrd(void)
-{
-	phys_addr_t start;
-	unsigned long size;
-
-	/* Ignore the virtul address computed during device tree parsing */
-	initrd_start = initrd_end = 0;
-
-	if (!phys_initrd_size)
-		return;
-	/*
-	 * Round the memory region to page boundaries as per free_initrd_mem()
-	 * This allows us to detect whether the pages overlapping the initrd
-	 * are in use, but more importantly, reserves the entire set of pages
-	 * as we don't want these pages allocated for other purposes.
-	 */
-	start = round_down(phys_initrd_start, PAGE_SIZE);
-	size = phys_initrd_size + (phys_initrd_start - start);
-	size = round_up(size, PAGE_SIZE);
-
-	if (!memblock_is_region_memory(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region",
-		       (u64)start, size);
-		goto disable;
-	}
-
-	if (memblock_is_region_reserved(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n",
-		       (u64)start, size);
-		goto disable;
-	}
-
-	memblock_reserve(start, size);
-	/* Now convert initrd to virtual addresses */
-	initrd_start = (unsigned long)__va(phys_initrd_start);
-	initrd_end = initrd_start + phys_initrd_size;
-	initrd_below_start_ok = 1;
-
-	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		(void *)(initrd_start), size);
-	return;
-disable:
-	pr_cont(" - disabling initrd\n");
-	initrd_start = 0;
-	initrd_end = 0;
-}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
 void __init setup_bootmem(void)
 {
 	phys_addr_t mem_start = 0;
@@ -198,20 +150,19 @@ void __init setup_bootmem(void)
 	dma32_phys_limit = min(4UL * SZ_1G, (unsigned long)PFN_PHYS(max_low_pfn));
 	set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET);
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	setup_initrd();
-#endif /* CONFIG_BLK_DEV_INITRD */
-
+	reserve_initrd_mem();
 	/*
-	 * Avoid using early_init_fdt_reserve_self() since __pa() does
+	 * If DTB is built in, no need to reserve its memblock.
+	 * Otherwise, do reserve it but avoid using
+	 * early_init_fdt_reserve_self() since __pa() does
 	 * not work for DTB pointers that are fixmap addresses
 	 */
+	if (!IS_ENABLED(CONFIG_BUILTIN_DTB))
 		memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
 
 	early_init_fdt_scan_reserved_mem();
 	dma_contiguous_reserve(dma32_phys_limit);
 	memblock_allow_resize();
-	memblock_dump_all();
 }
 
 #ifdef CONFIG_MMU
@@ -226,8 +177,6 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
 pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
 pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
 
-#define MAX_EARLY_MAPPING_SIZE	SZ_128M
-
 pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
 
 void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
@@ -302,13 +251,7 @@ static void __init create_pte_mapping(pte_t *ptep,
 
 pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
 pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
-
-#if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
-#define NUM_EARLY_PMDS		1UL
-#else
-#define NUM_EARLY_PMDS		(1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
-#endif
-pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
+pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
 pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
 
 static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
@@ -330,11 +273,9 @@ static pmd_t *get_pmd_virt_late(phys_addr_t pa)
 
 static phys_addr_t __init alloc_pmd_early(uintptr_t va)
 {
-	uintptr_t pmd_num;
+	BUG_ON((va - PAGE_OFFSET) >> PGDIR_SHIFT);
 
-	pmd_num = (va - PAGE_OFFSET) >> PGDIR_SHIFT;
-	BUG_ON(pmd_num >= NUM_EARLY_PMDS);
-	return (uintptr_t)&early_pmd[pmd_num * PTRS_PER_PMD];
+	return (uintptr_t)early_pmd;
 }
 
 static phys_addr_t __init alloc_pmd_fixmap(uintptr_t va)
@@ -452,7 +393,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	uintptr_t va, pa, end_va;
 	uintptr_t load_pa = (uintptr_t)(&_start);
 	uintptr_t load_sz = (uintptr_t)(&_end) - load_pa;
-	uintptr_t map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
+	uintptr_t map_size;
 #ifndef __PAGETABLE_PMD_FOLDED
 	pmd_t fix_bmap_spmd, fix_bmap_epmd;
 #endif
@@ -464,12 +405,11 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	 * Enforce boot alignment requirements of RV32 and
 	 * RV64 by only allowing PMD or PGD mappings.
 	 */
-	BUG_ON(map_size == PAGE_SIZE);
+	map_size = PMD_SIZE;
 
 	/* Sanity check alignment and size */
 	BUG_ON((PAGE_OFFSET % PGDIR_SIZE) != 0);
 	BUG_ON((load_pa % map_size) != 0);
-	BUG_ON(load_sz > MAX_EARLY_MAPPING_SIZE);
 
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
@@ -511,6 +451,7 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	/* Setup early PMD for DTB */
 	create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
 			   (uintptr_t)early_dtb_pmd, PGDIR_SIZE, PAGE_TABLE);
+#ifndef CONFIG_BUILTIN_DTB
 	/* Create two consecutive PMD mappings for FDT early scan */
 	pa = dtb_pa & ~(PMD_SIZE - 1);
 	create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA,
@@ -518,7 +459,11 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	create_pmd_mapping(early_dtb_pmd, DTB_EARLY_BASE_VA + PMD_SIZE,
 			   pa + PMD_SIZE, PMD_SIZE, PAGE_KERNEL);
 	dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PMD_SIZE - 1));
+#else /* CONFIG_BUILTIN_DTB */
+	dtb_early_va = __va(dtb_pa);
+#endif /* CONFIG_BUILTIN_DTB */
 #else
+#ifndef CONFIG_BUILTIN_DTB
 	/* Create two consecutive PGD mappings for FDT early scan */
 	pa = dtb_pa & ~(PGDIR_SIZE - 1);
 	create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA,
@@ -526,6 +471,9 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	create_pgd_mapping(early_pg_dir, DTB_EARLY_BASE_VA + PGDIR_SIZE,
 			   pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
 	dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & (PGDIR_SIZE - 1));
+#else /* CONFIG_BUILTIN_DTB */
+	dtb_early_va = __va(dtb_pa);
+#endif /* CONFIG_BUILTIN_DTB */
 #endif
 	dtb_early_pa = dtb_pa;
 
@@ -616,15 +564,7 @@ static void __init setup_vm_final(void)
 #else
 asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 {
-#ifdef CONFIG_BUILTIN_DTB
-	dtb_early_va = soc_lookup_builtin_dtb();
-	if (!dtb_early_va) {
-		/* Fallback to first available DTS */
-		dtb_early_va = (void *) __dtb_start;
-	}
-#else
 	dtb_early_va = (void *)dtb_pa;
-#endif
 	dtb_early_pa = dtb_pa;
 }
 
@@ -665,9 +605,15 @@ void mark_rodata_ro(void)
 void __init paging_init(void)
 {
 	setup_vm_final();
-	sparse_init();
 	setup_zero_page();
+}
+
+void __init misc_mem_init(void)
+{
+	arch_numa_init();
+	sparse_init();
 	zone_sizes_init();
+	memblock_dump_all();
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP

arch/riscv/mm/kasan_init.c

@@ -9,6 +9,19 @@
 #include <linux/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/fixmap.h>
+#include <asm/pgalloc.h>
+
+static __init void *early_alloc(size_t size, int node)
+{
+	void *ptr = memblock_alloc_try_nid(size, size,
+		__pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, node);
+
+	if (!ptr)
+		panic("%pS: Failed to allocate %zu bytes align=%zx nid=%d from=%llx\n",
+			__func__, size, size, node, (u64)__pa(MAX_DMA_ADDRESS));
+
+	return ptr;
+}
 
 extern pgd_t early_pg_dir[PTRS_PER_PGD];
 asmlinkage void __init kasan_early_init(void)
@@ -47,40 +60,133 @@ asmlinkage void __init kasan_early_init(void)
 	local_flush_tlb_all();
 }
 
-static void __init populate(void *start, void *end)
+static void kasan_populate_pte(pmd_t *pmd, unsigned long vaddr, unsigned long end)
 {
-	unsigned long i, offset;
-	unsigned long vaddr = (unsigned long)start & PAGE_MASK;
-	unsigned long vend = PAGE_ALIGN((unsigned long)end);
-	unsigned long n_pages = (vend - vaddr) / PAGE_SIZE;
-	unsigned long n_ptes =
-	    ((n_pages + PTRS_PER_PTE) & -PTRS_PER_PTE) / PTRS_PER_PTE;
-	unsigned long n_pmds =
-	    ((n_ptes + PTRS_PER_PMD) & -PTRS_PER_PMD) / PTRS_PER_PMD;
-
-	pte_t *pte =
-	    memblock_alloc(n_ptes * PTRS_PER_PTE * sizeof(pte_t), PAGE_SIZE);
-	pmd_t *pmd =
-	    memblock_alloc(n_pmds * PTRS_PER_PMD * sizeof(pmd_t), PAGE_SIZE);
-	pgd_t *pgd = pgd_offset_k(vaddr);
-
-	for (i = 0; i < n_pages; i++) {
-		phys_addr_t phys = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
-		set_pte(&pte[i], pfn_pte(PHYS_PFN(phys), PAGE_KERNEL));
+	phys_addr_t phys_addr;
+	pte_t *ptep, *base_pte;
+
+	if (pmd_none(*pmd))
+		base_pte = memblock_alloc(PTRS_PER_PTE * sizeof(pte_t), PAGE_SIZE);
+	else
+		base_pte = (pte_t *)pmd_page_vaddr(*pmd);
+
+	ptep = base_pte + pte_index(vaddr);
+
+	do {
+		if (pte_none(*ptep)) {
+			phys_addr = memblock_phys_alloc(PAGE_SIZE, PAGE_SIZE);
+			set_pte(ptep, pfn_pte(PFN_DOWN(phys_addr), PAGE_KERNEL));
 		}
+	} while (ptep++, vaddr += PAGE_SIZE, vaddr != end);
 
-	for (i = 0, offset = 0; i < n_ptes; i++, offset += PTRS_PER_PTE)
-		set_pmd(&pmd[i],
-			pfn_pmd(PFN_DOWN(__pa(&pte[offset])),
-				__pgprot(_PAGE_TABLE)));
+	set_pmd(pmd, pfn_pmd(PFN_DOWN(__pa(base_pte)), PAGE_TABLE));
+}
 
-	for (i = 0, offset = 0; i < n_pmds; i++, offset += PTRS_PER_PMD)
-		set_pgd(&pgd[i],
-			pfn_pgd(PFN_DOWN(__pa(&pmd[offset])),
-				__pgprot(_PAGE_TABLE)));
+static void kasan_populate_pmd(pgd_t *pgd, unsigned long vaddr, unsigned long end)
+{
+	phys_addr_t phys_addr;
+	pmd_t *pmdp, *base_pmd;
+	unsigned long next;
+
+	base_pmd = (pmd_t *)pgd_page_vaddr(*pgd);
+	if (base_pmd == lm_alias(kasan_early_shadow_pmd))
+		base_pmd = memblock_alloc(PTRS_PER_PMD * sizeof(pmd_t), PAGE_SIZE);
+
+	pmdp = base_pmd + pmd_index(vaddr);
+
+	do {
+		next = pmd_addr_end(vaddr, end);
+
+		if (pmd_none(*pmdp) && IS_ALIGNED(vaddr, PMD_SIZE) && (next - vaddr) >= PMD_SIZE) {
+			phys_addr = memblock_phys_alloc(PMD_SIZE, PMD_SIZE);
+			if (phys_addr) {
+				set_pmd(pmdp, pfn_pmd(PFN_DOWN(phys_addr), PAGE_KERNEL));
+				continue;
+			}
+		}
+
+		kasan_populate_pte(pmdp, vaddr, next);
+	} while (pmdp++, vaddr = next, vaddr != end);
+
+	/*
+	 * Wait for the whole PGD to be populated before setting the PGD in
+	 * the page table, otherwise, if we did set the PGD before populating
+	 * it entirely, memblock could allocate a page at a physical address
+	 * where KASAN is not populated yet and then we'd get a page fault.
+	 */
+	set_pgd(pgd, pfn_pgd(PFN_DOWN(__pa(base_pmd)), PAGE_TABLE));
+}
+
+static void kasan_populate_pgd(unsigned long vaddr, unsigned long end)
+{
+	phys_addr_t phys_addr;
+	pgd_t *pgdp = pgd_offset_k(vaddr);
+	unsigned long next;
+
+	do {
+		next = pgd_addr_end(vaddr, end);
+
+		/*
+		 * pgdp can't be none since kasan_early_init initialized all KASAN
+		 * shadow region with kasan_early_shadow_pmd: if this is stillthe case,
+		 * that means we can try to allocate a hugepage as a replacement.
+		 */
+		if (pgd_page_vaddr(*pgdp) == (unsigned long)lm_alias(kasan_early_shadow_pmd) &&
+		    IS_ALIGNED(vaddr, PGDIR_SIZE) && (next - vaddr) >= PGDIR_SIZE) {
+			phys_addr = memblock_phys_alloc(PGDIR_SIZE, PGDIR_SIZE);
+			if (phys_addr) {
+				set_pgd(pgdp, pfn_pgd(PFN_DOWN(phys_addr), PAGE_KERNEL));
+				continue;
+			}
+		}
+
+		kasan_populate_pmd(pgdp, vaddr, next);
+	} while (pgdp++, vaddr = next, vaddr != end);
+}
+
+static void __init kasan_populate(void *start, void *end)
+{
+	unsigned long vaddr = (unsigned long)start & PAGE_MASK;
+	unsigned long vend = PAGE_ALIGN((unsigned long)end);
+
+	kasan_populate_pgd(vaddr, vend);
 
 	local_flush_tlb_all();
-	memset(start, 0, end - start);
+	memset(start, KASAN_SHADOW_INIT, end - start);
+}
+
+void __init kasan_shallow_populate(void *start, void *end)
+{
+	unsigned long vaddr = (unsigned long)start & PAGE_MASK;
+	unsigned long vend = PAGE_ALIGN((unsigned long)end);
+	unsigned long pfn;
+	int index;
+	void *p;
+	pud_t *pud_dir, *pud_k;
+	pgd_t *pgd_dir, *pgd_k;
+	p4d_t *p4d_dir, *p4d_k;
+
+	while (vaddr < vend) {
+		index = pgd_index(vaddr);
+		pfn = csr_read(CSR_SATP) & SATP_PPN;
+		pgd_dir = (pgd_t *)pfn_to_virt(pfn) + index;
+		pgd_k = init_mm.pgd + index;
+		pgd_dir = pgd_offset_k(vaddr);
+		set_pgd(pgd_dir, *pgd_k);
+
+		p4d_dir = p4d_offset(pgd_dir, vaddr);
+		p4d_k  = p4d_offset(pgd_k, vaddr);
+
+		vaddr = (vaddr + PUD_SIZE) & PUD_MASK;
+		pud_dir = pud_offset(p4d_dir, vaddr);
+		pud_k = pud_offset(p4d_k, vaddr);
+
+		if (pud_present(*pud_dir)) {
+			p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
+			pud_populate(&init_mm, pud_dir, p);
+		}
+		vaddr += PAGE_SIZE;
+	}
 }
 
 void __init kasan_init(void)
@@ -90,7 +196,15 @@ void __init kasan_init(void)
 
 	kasan_populate_early_shadow((void *)KASAN_SHADOW_START,
 				    (void *)kasan_mem_to_shadow((void *)
-								VMALLOC_END));
+								VMEMMAP_END));
+	if (IS_ENABLED(CONFIG_KASAN_VMALLOC))
+		kasan_shallow_populate(
+			(void *)kasan_mem_to_shadow((void *)VMALLOC_START),
+			(void *)kasan_mem_to_shadow((void *)VMALLOC_END));
+	else
+		kasan_populate_early_shadow(
+			(void *)kasan_mem_to_shadow((void *)VMALLOC_START),
+			(void *)kasan_mem_to_shadow((void *)VMALLOC_END));
 
 	for_each_mem_range(i, &_start, &_end) {
 		void *start = (void *)__va(_start);
@@ -99,7 +213,7 @@ void __init kasan_init(void)
 		if (start >= end)
 			break;
 
-		populate(kasan_mem_to_shadow(start), kasan_mem_to_shadow(end));
+		kasan_populate(kasan_mem_to_shadow(start), kasan_mem_to_shadow(end));
 	};
 
 	for (i = 0; i < PTRS_PER_PTE; i++)
@@ -108,6 +222,6 @@ void __init kasan_init(void)
 			       __pgprot(_PAGE_PRESENT | _PAGE_READ |
 					_PAGE_ACCESSED)));
 
-	memset(kasan_early_shadow_page, 0, PAGE_SIZE);
+	memset(kasan_early_shadow_page, KASAN_SHADOW_INIT, PAGE_SIZE);
 	init_task.kasan_depth = 0;
 }

drivers/base/Kconfig

@@ -213,4 +213,10 @@ config GENERIC_ARCH_TOPOLOGY
 	  appropriate scaling, sysfs interface for reading capacity values at
 	  runtime.
 
+config GENERIC_ARCH_NUMA
+	bool
+	help
+	  Enable support for generic NUMA implementation. Currently, RISC-V
+	  and ARM64 use it.
+
 endmenu

drivers/base/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL) += pinctrl.o
 obj-$(CONFIG_DEV_COREDUMP) += devcoredump.o
 obj-$(CONFIG_GENERIC_MSI_IRQ_DOMAIN) += platform-msi.o
 obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY) += arch_topology.o
+obj-$(CONFIG_GENERIC_ARCH_NUMA) += arch_numa.o
 
 obj-y			+= test/
 

arch/arm64/mm/numa.c → drivers/base/arch_numa.c

@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 
-#include <asm/acpi.h>
 #include <asm/sections.h>
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
@@ -356,11 +355,12 @@ static int __init numa_register_nodes(void)
 	/* Check that valid nid is set to memblks */
 	for_each_mem_region(mblk) {
 		int mblk_nid = memblock_get_region_node(mblk);
+		phys_addr_t start = mblk->base;
+		phys_addr_t end = mblk->base + mblk->size - 1;
 
 		if (mblk_nid == NUMA_NO_NODE || mblk_nid >= MAX_NUMNODES) {
-			pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
-				mblk_nid, mblk->base,
-				mblk->base + mblk->size - 1);
+			pr_warn("Warning: invalid memblk node %d [mem %pap-%pap]\n",
+				mblk_nid, &start, &end);
 			return -EINVAL;
 		}
 	}
@@ -428,14 +428,14 @@ static int __init numa_init(int (*init_func)(void))
 static int __init dummy_numa_init(void)
 {
 	phys_addr_t start = memblock_start_of_DRAM();
-	phys_addr_t end = memblock_end_of_DRAM();
+	phys_addr_t end = memblock_end_of_DRAM() - 1;
 	int ret;
 
 	if (numa_off)
 		pr_info("NUMA disabled\n"); /* Forced off on command line. */
-	pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", start, end - 1);
+	pr_info("Faking a node at [mem %pap-%pap]\n", &start, &end);
 
-	ret = numa_add_memblk(0, start, end);
+	ret = numa_add_memblk(0, start, end + 1);
 	if (ret) {
 		pr_err("NUMA init failed\n");
 		return ret;
@@ -445,16 +445,36 @@ static int __init dummy_numa_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI_NUMA
+static int __init arch_acpi_numa_init(void)
+{
+	int ret;
+
+	ret = acpi_numa_init();
+	if (ret) {
+		pr_info("Failed to initialise from firmware\n");
+		return ret;
+	}
+
+	return srat_disabled() ? -EINVAL : 0;
+}
+#else
+static int __init arch_acpi_numa_init(void)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 /**
- * arm64_numa_init() - Initialize NUMA
+ * arch_numa_init() - Initialize NUMA
  *
  * Try each configured NUMA initialization method until one succeeds. The
  * last fallback is dummy single node config encompassing whole memory.
  */
-void __init arm64_numa_init(void)
+void __init arch_numa_init(void)
 {
 	if (!numa_off) {
-		if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))
+		if (!acpi_disabled && !numa_init(arch_acpi_numa_init))
 			return;
 		if (acpi_disabled && !numa_init(of_numa_init))
 			return;

drivers/clk/Kconfig

@@ -369,6 +369,13 @@ config COMMON_CLK_FIXED_MMIO
 	help
 	  Support for Memory Mapped IO Fixed clocks
 
+config COMMON_CLK_K210
+	bool "Clock driver for the Canaan Kendryte K210 SoC"
+	depends on OF && RISCV && SOC_CANAAN
+	default SOC_CANAAN
+	help
+	  Support for the Canaan Kendryte K210 RISC-V SoC clocks.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/baikal-t1/Kconfig"

drivers/clk/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
+obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
 obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o

drivers/clk/clk-k210.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ */
+#define pr_fmt(fmt)     "k210-clk: " fmt
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <soc/canaan/k210-sysctl.h>
+
+#include <dt-bindings/clock/k210-clk.h>
+
+struct k210_sysclk;
+
+struct k210_clk {
+	int id;
+	struct k210_sysclk *ksc;
+	struct clk_hw hw;
+};
+
+struct k210_clk_cfg {
+	const char *name;
+	u8 gate_reg;
+	u8 gate_bit;
+	u8 div_reg;
+	u8 div_shift;
+	u8 div_width;
+	u8 div_type;
+	u8 mux_reg;
+	u8 mux_bit;
+};
+
+enum k210_clk_div_type {
+	K210_DIV_NONE,
+	K210_DIV_ONE_BASED,
+	K210_DIV_DOUBLE_ONE_BASED,
+	K210_DIV_POWER_OF_TWO,
+};
+
+#define K210_GATE(_reg, _bit)	\
+	.gate_reg = (_reg),	\
+	.gate_bit = (_bit)
+
+#define K210_DIV(_reg, _shift, _width, _type)	\
+	.div_reg = (_reg),			\
+	.div_shift = (_shift),			\
+	.div_width = (_width),			\
+	.div_type = (_type)
+
+#define K210_MUX(_reg, _bit)	\
+	.mux_reg = (_reg),	\
+	.mux_bit = (_bit)
+
+static struct k210_clk_cfg k210_clk_cfgs[K210_NUM_CLKS] = {
+	/* Gated clocks, no mux, no divider */
+	[K210_CLK_CPU] = {
+		.name = "cpu",
+		K210_GATE(K210_SYSCTL_EN_CENT, 0)
+	},
+	[K210_CLK_DMA] = {
+		.name = "dma",
+		K210_GATE(K210_SYSCTL_EN_PERI, 1)
+	},
+	[K210_CLK_FFT] = {
+		.name = "fft",
+		K210_GATE(K210_SYSCTL_EN_PERI, 4)
+	},
+	[K210_CLK_GPIO] = {
+		.name = "gpio",
+		K210_GATE(K210_SYSCTL_EN_PERI, 5)
+	},
+	[K210_CLK_UART1] = {
+		.name = "uart1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 16)
+	},
+	[K210_CLK_UART2] = {
+		.name = "uart2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 17)
+	},
+	[K210_CLK_UART3] = {
+		.name = "uart3",
+		K210_GATE(K210_SYSCTL_EN_PERI, 18)
+	},
+	[K210_CLK_FPIOA] = {
+		.name = "fpioa",
+		K210_GATE(K210_SYSCTL_EN_PERI, 20)
+	},
+	[K210_CLK_SHA] = {
+		.name = "sha",
+		K210_GATE(K210_SYSCTL_EN_PERI, 26)
+	},
+	[K210_CLK_AES] = {
+		.name = "aes",
+		K210_GATE(K210_SYSCTL_EN_PERI, 19)
+	},
+	[K210_CLK_OTP] = {
+		.name = "otp",
+		K210_GATE(K210_SYSCTL_EN_PERI, 27)
+	},
+	[K210_CLK_RTC] = {
+		.name = "rtc",
+		K210_GATE(K210_SYSCTL_EN_PERI, 29)
+	},
+
+	/* Gated divider clocks */
+	[K210_CLK_SRAM0] = {
+		.name = "sram0",
+		K210_GATE(K210_SYSCTL_EN_CENT, 1),
+		K210_DIV(K210_SYSCTL_THR0, 0, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_SRAM1] = {
+		.name = "sram1",
+		K210_GATE(K210_SYSCTL_EN_CENT, 2),
+		K210_DIV(K210_SYSCTL_THR0, 4, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_ROM] = {
+		.name = "rom",
+		K210_GATE(K210_SYSCTL_EN_PERI, 0),
+		K210_DIV(K210_SYSCTL_THR0, 16, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_DVP] = {
+		.name = "dvp",
+		K210_GATE(K210_SYSCTL_EN_PERI, 3),
+		K210_DIV(K210_SYSCTL_THR0, 12, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB0] = {
+		.name = "apb0",
+		K210_GATE(K210_SYSCTL_EN_CENT, 3),
+		K210_DIV(K210_SYSCTL_SEL0, 3, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB1] = {
+		.name = "apb1",
+		K210_GATE(K210_SYSCTL_EN_CENT, 4),
+		K210_DIV(K210_SYSCTL_SEL0, 6, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_APB2] = {
+		.name = "apb2",
+		K210_GATE(K210_SYSCTL_EN_CENT, 5),
+		K210_DIV(K210_SYSCTL_SEL0, 9, 3, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_AI] = {
+		.name = "ai",
+		K210_GATE(K210_SYSCTL_EN_PERI, 2),
+		K210_DIV(K210_SYSCTL_THR0, 8, 4, K210_DIV_ONE_BASED)
+	},
+	[K210_CLK_SPI0] = {
+		.name = "spi0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 6),
+		K210_DIV(K210_SYSCTL_THR1, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_SPI1] = {
+		.name = "spi1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 7),
+		K210_DIV(K210_SYSCTL_THR1, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_SPI2] = {
+		.name = "spi2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 8),
+		K210_DIV(K210_SYSCTL_THR1, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C0] = {
+		.name = "i2c0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 13),
+		K210_DIV(K210_SYSCTL_THR5, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C1] = {
+		.name = "i2c1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 14),
+		K210_DIV(K210_SYSCTL_THR5, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2C2] = {
+		.name = "i2c2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 15),
+		K210_DIV(K210_SYSCTL_THR5, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_WDT0] = {
+		.name = "wdt0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 24),
+		K210_DIV(K210_SYSCTL_THR6, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_WDT1] = {
+		.name = "wdt1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 25),
+		K210_DIV(K210_SYSCTL_THR6, 8, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S0] = {
+		.name = "i2s0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 10),
+		K210_DIV(K210_SYSCTL_THR3, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S1] = {
+		.name = "i2s1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 11),
+		K210_DIV(K210_SYSCTL_THR3, 16, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S2] = {
+		.name = "i2s2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 12),
+		K210_DIV(K210_SYSCTL_THR4, 0, 16, K210_DIV_DOUBLE_ONE_BASED)
+	},
+
+	/* Divider clocks, no gate, no mux */
+	[K210_CLK_I2S0_M] = {
+		.name = "i2s0_m",
+		K210_DIV(K210_SYSCTL_THR4, 16, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S1_M] = {
+		.name = "i2s1_m",
+		K210_DIV(K210_SYSCTL_THR4, 24, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+	[K210_CLK_I2S2_M] = {
+		.name = "i2s2_m",
+		K210_DIV(K210_SYSCTL_THR4, 0, 8, K210_DIV_DOUBLE_ONE_BASED)
+	},
+
+	/* Muxed gated divider clocks */
+	[K210_CLK_SPI3] = {
+		.name = "spi3",
+		K210_GATE(K210_SYSCTL_EN_PERI, 9),
+		K210_DIV(K210_SYSCTL_THR1, 24, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 12)
+	},
+	[K210_CLK_TIMER0] = {
+		.name = "timer0",
+		K210_GATE(K210_SYSCTL_EN_PERI, 21),
+		K210_DIV(K210_SYSCTL_THR2,  0, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 13)
+	},
+	[K210_CLK_TIMER1] = {
+		.name = "timer1",
+		K210_GATE(K210_SYSCTL_EN_PERI, 22),
+		K210_DIV(K210_SYSCTL_THR2, 8, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 14)
+	},
+	[K210_CLK_TIMER2] = {
+		.name = "timer2",
+		K210_GATE(K210_SYSCTL_EN_PERI, 23),
+		K210_DIV(K210_SYSCTL_THR2, 16, 8, K210_DIV_DOUBLE_ONE_BASED),
+		K210_MUX(K210_SYSCTL_SEL0, 15)
+	},
+};
+
+/*
+ * PLL control register bits.
+ */
+#define K210_PLL_CLKR		GENMASK(3, 0)
+#define K210_PLL_CLKF		GENMASK(9, 4)
+#define K210_PLL_CLKOD		GENMASK(13, 10)
+#define K210_PLL_BWADJ		GENMASK(19, 14)
+#define K210_PLL_RESET		(1 << 20)
+#define K210_PLL_PWRD		(1 << 21)
+#define K210_PLL_INTFB		(1 << 22)
+#define K210_PLL_BYPASS		(1 << 23)
+#define K210_PLL_TEST		(1 << 24)
+#define K210_PLL_EN		(1 << 25)
+#define K210_PLL_SEL		GENMASK(27, 26) /* PLL2 only */
+
+/*
+ * PLL lock register bits.
+ */
+#define K210_PLL_LOCK		0
+#define K210_PLL_CLEAR_SLIP	2
+#define K210_PLL_TEST_OUT	3
+
+/*
+ * Clock selector register bits.
+ */
+#define K210_ACLK_SEL		BIT(0)
+#define K210_ACLK_DIV		GENMASK(2, 1)
+
+/*
+ * PLLs.
+ */
+enum k210_pll_id {
+	K210_PLL0, K210_PLL1, K210_PLL2, K210_PLL_NUM
+};
+
+struct k210_pll {
+	enum k210_pll_id id;
+	struct k210_sysclk *ksc;
+	void __iomem *base;
+	void __iomem *reg;
+	void __iomem *lock;
+	u8 lock_shift;
+	u8 lock_width;
+	struct clk_hw hw;
+};
+#define to_k210_pll(_hw)	container_of(_hw, struct k210_pll, hw)
+
+/*
+ * PLLs configuration: by default PLL0 runs at 780 MHz and PLL1 at 299 MHz.
+ * The first 2 SRAM banks depend on ACLK/CPU clock which is by default PLL0
+ * rate divided by 2. Set PLL1 to 390 MHz so that the third SRAM bank has the
+ * same clock as the first 2.
+ */
+struct k210_pll_cfg {
+	u32 reg;
+	u8 lock_shift;
+	u8 lock_width;
+	u32 r;
+	u32 f;
+	u32 od;
+	u32 bwadj;
+};
+
+static struct k210_pll_cfg k210_plls_cfg[] = {
+	{ K210_SYSCTL_PLL0,  0, 2, 0, 59, 1, 59 }, /* 780 MHz */
+	{ K210_SYSCTL_PLL1,  8, 1, 0, 59, 3, 59 }, /* 390 MHz */
+	{ K210_SYSCTL_PLL2, 16, 1, 0, 22, 1, 22 }, /* 299 MHz */
+};
+
+/**
+ * struct k210_sysclk - sysclk driver data
+ * @regs: system controller registers start address
+ * @clk_lock: clock setting spinlock
+ * @plls: SoC PLLs descriptors
+ * @aclk: ACLK clock
+ * @clks: All other clocks
+ */
+struct k210_sysclk {
+	void __iomem			*regs;
+	spinlock_t			clk_lock;
+	struct k210_pll			plls[K210_PLL_NUM];
+	struct clk_hw			aclk;
+	struct k210_clk			clks[K210_NUM_CLKS];
+};
+
+#define to_k210_sysclk(_hw)	container_of(_hw, struct k210_sysclk, aclk)
+
+/*
+ * Set ACLK parent selector: 0 for IN0, 1 for PLL0.
+ */
+static void k210_aclk_set_selector(void __iomem *regs, u8 sel)
+{
+	u32 reg = readl(regs + K210_SYSCTL_SEL0);
+
+	if (sel)
+		reg |= K210_ACLK_SEL;
+	else
+		reg &= K210_ACLK_SEL;
+	writel(reg, regs + K210_SYSCTL_SEL0);
+}
+
+static void k210_init_pll(void __iomem *regs, enum k210_pll_id pllid,
+			  struct k210_pll *pll)
+{
+	pll->id = pllid;
+	pll->reg = regs + k210_plls_cfg[pllid].reg;
+	pll->lock = regs + K210_SYSCTL_PLL_LOCK;
+	pll->lock_shift = k210_plls_cfg[pllid].lock_shift;
+	pll->lock_width = k210_plls_cfg[pllid].lock_width;
+}
+
+static void k210_pll_wait_for_lock(struct k210_pll *pll)
+{
+	u32 reg, mask = GENMASK(pll->lock_shift + pll->lock_width - 1,
+				pll->lock_shift);
+
+	while (true) {
+		reg = readl(pll->lock);
+		if ((reg & mask) == mask)
+			break;
+
+		reg |= BIT(pll->lock_shift + K210_PLL_CLEAR_SLIP);
+		writel(reg, pll->lock);
+	}
+}
+
+static bool k210_pll_hw_is_enabled(struct k210_pll *pll)
+{
+	u32 reg = readl(pll->reg);
+	u32 mask = K210_PLL_PWRD | K210_PLL_EN;
+
+	if (reg & K210_PLL_RESET)
+		return false;
+
+	return (reg & mask) == mask;
+}
+
+static void k210_pll_enable_hw(void __iomem *regs, struct k210_pll *pll)
+{
+	struct k210_pll_cfg *pll_cfg = &k210_plls_cfg[pll->id];
+	u32 reg;
+
+	if (k210_pll_hw_is_enabled(pll))
+		return;
+
+	/*
+	 * For PLL0, we need to re-parent ACLK to IN0 to keep the CPU cores and
+	 * SRAM running.
+	 */
+	if (pll->id == K210_PLL0)
+		k210_aclk_set_selector(regs, 0);
+
+	/* Set PLL factors */
+	reg = readl(pll->reg);
+	reg &= ~GENMASK(19, 0);
+	reg |= FIELD_PREP(K210_PLL_CLKR, pll_cfg->r);
+	reg |= FIELD_PREP(K210_PLL_CLKF, pll_cfg->f);
+	reg |= FIELD_PREP(K210_PLL_CLKOD, pll_cfg->od);
+	reg |= FIELD_PREP(K210_PLL_BWADJ, pll_cfg->bwadj);
+	reg |= K210_PLL_PWRD;
+	writel(reg, pll->reg);
+
+	/*
+	 * Reset the PLL: ensure reset is low before asserting it.
+	 * The magic NOPs come from the Kendryte reference SDK.
+	 */
+	reg &= ~K210_PLL_RESET;
+	writel(reg, pll->reg);
+	reg |= K210_PLL_RESET;
+	writel(reg, pll->reg);
+	nop();
+	nop();
+	reg &= ~K210_PLL_RESET;
+	writel(reg, pll->reg);
+
+	k210_pll_wait_for_lock(pll);
+
+	reg &= ~K210_PLL_BYPASS;
+	reg |= K210_PLL_EN;
+	writel(reg, pll->reg);
+
+	if (pll->id == K210_PLL0)
+		k210_aclk_set_selector(regs, 1);
+}
+
+static int k210_pll_enable(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	k210_pll_enable_hw(ksc->regs, pll);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static void k210_pll_disable(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+	u32 reg;
+
+	/*
+	 * Bypassing before powering off is important so child clocks do not
+	 * stop working. This is especially important for pll0, the indirect
+	 * parent of the cpu clock.
+	 */
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(pll->reg);
+	reg |= K210_PLL_BYPASS;
+	writel(reg, pll->reg);
+
+	reg &= ~K210_PLL_PWRD;
+	reg &= ~K210_PLL_EN;
+	writel(reg, pll->reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+}
+
+static int k210_pll_is_enabled(struct clk_hw *hw)
+{
+	return k210_pll_hw_is_enabled(to_k210_pll(hw));
+}
+
+static unsigned long k210_pll_get_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	u32 reg = readl(pll->reg);
+	u32 r, f, od;
+
+	if (reg & K210_PLL_BYPASS)
+		return parent_rate;
+
+	if (!(reg & K210_PLL_PWRD))
+		return 0;
+
+	r = FIELD_GET(K210_PLL_CLKR, reg) + 1;
+	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
+	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
+
+	return (u64)parent_rate * f / (r * od);
+}
+
+static const struct clk_ops k210_pll_ops = {
+	.enable		= k210_pll_enable,
+	.disable	= k210_pll_disable,
+	.is_enabled	= k210_pll_is_enabled,
+	.recalc_rate	= k210_pll_get_rate,
+};
+
+static int k210_pll2_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	struct k210_sysclk *ksc = pll->ksc;
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	reg = readl(pll->reg);
+	reg &= ~K210_PLL_SEL;
+	reg |= FIELD_PREP(K210_PLL_SEL, index);
+	writel(reg, pll->reg);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_pll2_get_parent(struct clk_hw *hw)
+{
+	struct k210_pll *pll = to_k210_pll(hw);
+	u32 reg = readl(pll->reg);
+
+	return FIELD_GET(K210_PLL_SEL, reg);
+}
+
+static const struct clk_ops k210_pll2_ops = {
+	.enable		= k210_pll_enable,
+	.disable	= k210_pll_disable,
+	.is_enabled	= k210_pll_is_enabled,
+	.recalc_rate	= k210_pll_get_rate,
+	.set_parent	= k210_pll2_set_parent,
+	.get_parent	= k210_pll2_get_parent,
+};
+
+static int __init k210_register_pll(struct device_node *np,
+				    struct k210_sysclk *ksc,
+				    enum k210_pll_id pllid, const char *name,
+				    int num_parents, const struct clk_ops *ops)
+{
+	struct k210_pll *pll = &ksc->plls[pllid];
+	struct clk_init_data init = {};
+	const struct clk_parent_data parent_data[] = {
+		{ /* .index = 0 for in0 */ },
+		{ .hw = &ksc->plls[K210_PLL0].hw },
+		{ .hw = &ksc->plls[K210_PLL1].hw },
+	};
+
+	init.name = name;
+	init.parent_data = parent_data;
+	init.num_parents = num_parents;
+	init.ops = ops;
+
+	pll->hw.init = &init;
+	pll->ksc = ksc;
+
+	return of_clk_hw_register(np, &pll->hw);
+}
+
+static int __init k210_register_plls(struct device_node *np,
+				     struct k210_sysclk *ksc)
+{
+	int i, ret;
+
+	for (i = 0; i < K210_PLL_NUM; i++)
+		k210_init_pll(ksc->regs, i, &ksc->plls[i]);
+
+	/* PLL0 and PLL1 only have IN0 as parent */
+	ret = k210_register_pll(np, ksc, K210_PLL0, "pll0", 1, &k210_pll_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL0 failed\n", np);
+		return ret;
+	}
+	ret = k210_register_pll(np, ksc, K210_PLL1, "pll1", 1, &k210_pll_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL1 failed\n", np);
+		return ret;
+	}
+
+	/* PLL2 has IN0, PLL0 and PLL1 as parents */
+	ret = k210_register_pll(np, ksc, K210_PLL2, "pll2", 3, &k210_pll2_ops);
+	if (ret) {
+		pr_err("%pOFP: register PLL2 failed\n", np);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int k210_aclk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+
+	k210_aclk_set_selector(ksc->regs, index);
+
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_aclk_get_parent(struct clk_hw *hw)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	u32 sel;
+
+	sel = readl(ksc->regs + K210_SYSCTL_SEL0) & K210_ACLK_SEL;
+
+	return sel ? 1 : 0;
+}
+
+static unsigned long k210_aclk_get_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct k210_sysclk *ksc = to_k210_sysclk(hw);
+	u32 reg = readl(ksc->regs + K210_SYSCTL_SEL0);
+	unsigned int shift;
+
+	if (!(reg & 0x1))
+		return parent_rate;
+
+	shift = FIELD_GET(K210_ACLK_DIV, reg);
+
+	return parent_rate / (2UL << shift);
+}
+
+static const struct clk_ops k210_aclk_ops = {
+	.set_parent	= k210_aclk_set_parent,
+	.get_parent	= k210_aclk_get_parent,
+	.recalc_rate	= k210_aclk_get_rate,
+};
+
+/*
+ * ACLK has IN0 and PLL0 as parents.
+ */
+static int __init k210_register_aclk(struct device_node *np,
+				     struct k210_sysclk *ksc)
+{
+	struct clk_init_data init = {};
+	const struct clk_parent_data parent_data[] = {
+		{ /* .index = 0 for in0 */ },
+		{ .hw = &ksc->plls[K210_PLL0].hw },
+	};
+	int ret;
+
+	init.name = "aclk";
+	init.parent_data = parent_data;
+	init.num_parents = 2;
+	init.ops = &k210_aclk_ops;
+	ksc->aclk.init = &init;
+
+	ret = of_clk_hw_register(np, &ksc->aclk);
+	if (ret) {
+		pr_err("%pOFP: register aclk failed\n", np);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define to_k210_clk(_hw)	container_of(_hw, struct k210_clk, hw)
+
+static int k210_clk_enable(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	if (!cfg->gate_reg)
+		return 0;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->gate_reg);
+	reg |= BIT(cfg->gate_bit);
+	writel(reg, ksc->regs + cfg->gate_reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static void k210_clk_disable(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	if (!cfg->gate_reg)
+		return;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->gate_reg);
+	reg &= ~BIT(cfg->gate_bit);
+	writel(reg, ksc->regs + cfg->gate_reg);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+}
+
+static int k210_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->mux_reg);
+	if (index)
+		reg |= BIT(cfg->mux_bit);
+	else
+		reg &= ~BIT(cfg->mux_bit);
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return 0;
+}
+
+static u8 k210_clk_get_parent(struct clk_hw *hw)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	unsigned long flags;
+	u32 reg, idx;
+
+	spin_lock_irqsave(&ksc->clk_lock, flags);
+	reg = readl(ksc->regs + cfg->mux_reg);
+	idx = (reg & BIT(cfg->mux_bit)) ? 1 : 0;
+	spin_unlock_irqrestore(&ksc->clk_lock, flags);
+
+	return idx;
+}
+
+static unsigned long k210_clk_get_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct k210_clk *kclk = to_k210_clk(hw);
+	struct k210_sysclk *ksc = kclk->ksc;
+	struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id];
+	u32 reg, div_val;
+
+	if (!cfg->div_reg)
+		return parent_rate;
+
+	reg = readl(ksc->regs + cfg->div_reg);
+	div_val = (reg >> cfg->div_shift) & GENMASK(cfg->div_width - 1, 0);
+
+	switch (cfg->div_type) {
+	case K210_DIV_ONE_BASED:
+		return parent_rate / (div_val + 1);
+	case K210_DIV_DOUBLE_ONE_BASED:
+		return parent_rate / ((div_val + 1) * 2);
+	case K210_DIV_POWER_OF_TWO:
+		return parent_rate / (2UL << div_val);
+	case K210_DIV_NONE:
+	default:
+		return 0;
+	}
+}
+
+static const struct clk_ops k210_clk_mux_ops = {
+	.enable		= k210_clk_enable,
+	.disable	= k210_clk_disable,
+	.set_parent	= k210_clk_set_parent,
+	.get_parent	= k210_clk_get_parent,
+	.recalc_rate	= k210_clk_get_rate,
+};
+
+static const struct clk_ops k210_clk_ops = {
+	.enable		= k210_clk_enable,
+	.disable	= k210_clk_disable,
+	.recalc_rate	= k210_clk_get_rate,
+};
+
+static void __init k210_register_clk(struct device_node *np,
+				     struct k210_sysclk *ksc, int id,
+				     const struct clk_parent_data *parent_data,
+				     int num_parents, unsigned long flags)
+{
+	struct k210_clk *kclk = &ksc->clks[id];
+	struct clk_init_data init = {};
+	int ret;
+
+	init.name = k210_clk_cfgs[id].name;
+	init.flags = flags;
+	init.parent_data = parent_data;
+	init.num_parents = num_parents;
+	if (num_parents > 1)
+		init.ops = &k210_clk_mux_ops;
+	else
+		init.ops = &k210_clk_ops;
+
+	kclk->id = id;
+	kclk->ksc = ksc;
+	kclk->hw.init = &init;
+
+	ret = of_clk_hw_register(np, &kclk->hw);
+	if (ret) {
+		pr_err("%pOFP: register clock %s failed\n",
+		       np, k210_clk_cfgs[id].name);
+		kclk->id = -1;
+	}
+}
+
+/*
+ * All muxed clocks have IN0 and PLL0 as parents.
+ */
+static inline void __init k210_register_mux_clk(struct device_node *np,
+						struct k210_sysclk *ksc, int id)
+{
+	const struct clk_parent_data parent_data[2] = {
+		{ /* .index = 0 for in0 */ },
+		{ .hw = &ksc->plls[K210_PLL0].hw }
+	};
+
+	k210_register_clk(np, ksc, id, parent_data, 2, 0);
+}
+
+static inline void __init k210_register_in0_child(struct device_node *np,
+						struct k210_sysclk *ksc, int id)
+{
+	const struct clk_parent_data parent_data = {
+		/* .index = 0 for in0 */
+	};
+
+	k210_register_clk(np, ksc, id, &parent_data, 1, 0);
+}
+
+static inline void __init k210_register_pll_child(struct device_node *np,
+						struct k210_sysclk *ksc, int id,
+						enum k210_pll_id pllid,
+						unsigned long flags)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->plls[pllid].hw,
+	};
+
+	k210_register_clk(np, ksc, id, &parent_data, 1, flags);
+}
+
+static inline void __init k210_register_aclk_child(struct device_node *np,
+						struct k210_sysclk *ksc, int id,
+						unsigned long flags)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->aclk,
+	};
+
+	k210_register_clk(np, ksc, id, &parent_data, 1, flags);
+}
+
+static inline void __init k210_register_clk_child(struct device_node *np,
+						struct k210_sysclk *ksc, int id,
+						int parent_id)
+{
+	const struct clk_parent_data parent_data = {
+		.hw = &ksc->clks[parent_id].hw,
+	};
+
+	k210_register_clk(np, ksc, id, &parent_data, 1, 0);
+}
+
+static struct clk_hw *k210_clk_hw_onecell_get(struct of_phandle_args *clkspec,
+					      void *data)
+{
+	struct k210_sysclk *ksc = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= K210_NUM_CLKS)
+		return ERR_PTR(-EINVAL);
+
+	return &ksc->clks[idx].hw;
+}
+
+static void __init k210_clk_init(struct device_node *np)
+{
+	struct device_node *sysctl_np;
+	struct k210_sysclk *ksc;
+	int i, ret;
+
+	ksc = kzalloc(sizeof(*ksc), GFP_KERNEL);
+	if (!ksc)
+		return;
+
+	spin_lock_init(&ksc->clk_lock);
+	sysctl_np = of_get_parent(np);
+	ksc->regs = of_iomap(sysctl_np, 0);
+	of_node_put(sysctl_np);
+	if (!ksc->regs) {
+		pr_err("%pOFP: failed to map registers\n", np);
+		return;
+	}
+
+	ret = k210_register_plls(np, ksc);
+	if (ret)
+		return;
+
+	ret = k210_register_aclk(np, ksc);
+	if (ret)
+		return;
+
+	/*
+	 * Critical clocks: there are no consumers of the SRAM clocks,
+	 * including the AI clock for the third SRAM bank. The CPU clock
+	 * is only referenced by the uarths serial device and so would be
+	 * disabled if the serial console is disabled to switch to another
+	 * console. Mark all these clocks as critical so that they are never
+	 * disabled by the core clock management.
+	 */
+	k210_register_aclk_child(np, ksc, K210_CLK_CPU, CLK_IS_CRITICAL);
+	k210_register_aclk_child(np, ksc, K210_CLK_SRAM0, CLK_IS_CRITICAL);
+	k210_register_aclk_child(np, ksc, K210_CLK_SRAM1, CLK_IS_CRITICAL);
+	k210_register_pll_child(np, ksc, K210_CLK_AI, K210_PLL1,
+				CLK_IS_CRITICAL);
+
+	/* Clocks with aclk as source */
+	k210_register_aclk_child(np, ksc, K210_CLK_DMA, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_FFT, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_ROM, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_DVP, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_APB0, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_APB1, 0);
+	k210_register_aclk_child(np, ksc, K210_CLK_APB2, 0);
+
+	/* Clocks with PLL0 as source */
+	k210_register_pll_child(np, ksc, K210_CLK_SPI0, K210_PLL0, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_SPI1, K210_PLL0, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_SPI2, K210_PLL0, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2C0, K210_PLL0, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2C1, K210_PLL0, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2C2, K210_PLL0, 0);
+
+	/* Clocks with PLL2 as source */
+	k210_register_pll_child(np, ksc, K210_CLK_I2S0, K210_PLL2, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2S1, K210_PLL2, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2S2, K210_PLL2, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2S0_M, K210_PLL2, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2S1_M, K210_PLL2, 0);
+	k210_register_pll_child(np, ksc, K210_CLK_I2S2_M, K210_PLL2, 0);
+
+	/* Clocks with IN0 as source */
+	k210_register_in0_child(np, ksc, K210_CLK_WDT0);
+	k210_register_in0_child(np, ksc, K210_CLK_WDT1);
+	k210_register_in0_child(np, ksc, K210_CLK_RTC);
+
+	/* Clocks with APB0 as source */
+	k210_register_clk_child(np, ksc, K210_CLK_GPIO, K210_CLK_APB0);
+	k210_register_clk_child(np, ksc, K210_CLK_UART1, K210_CLK_APB0);
+	k210_register_clk_child(np, ksc, K210_CLK_UART2, K210_CLK_APB0);
+	k210_register_clk_child(np, ksc, K210_CLK_UART3, K210_CLK_APB0);
+	k210_register_clk_child(np, ksc, K210_CLK_FPIOA, K210_CLK_APB0);
+	k210_register_clk_child(np, ksc, K210_CLK_SHA, K210_CLK_APB0);
+
+	/* Clocks with APB1 as source */
+	k210_register_clk_child(np, ksc, K210_CLK_AES, K210_CLK_APB1);
+	k210_register_clk_child(np, ksc, K210_CLK_OTP, K210_CLK_APB1);
+
+	/* Mux clocks with in0 or pll0 as source */
+	k210_register_mux_clk(np, ksc, K210_CLK_SPI3);
+	k210_register_mux_clk(np, ksc, K210_CLK_TIMER0);
+	k210_register_mux_clk(np, ksc, K210_CLK_TIMER1);
+	k210_register_mux_clk(np, ksc, K210_CLK_TIMER2);
+
+	/* Check for registration errors */
+	for (i = 0; i < K210_NUM_CLKS; i++) {
+		if (ksc->clks[i].id != i)
+			return;
+	}
+
+	ret = of_clk_add_hw_provider(np, k210_clk_hw_onecell_get, ksc);
+	if (ret) {
+		pr_err("%pOFP: add clock provider failed %d\n", np, ret);
+		return;
+	}
+
+	pr_info("%pOFP: CPU running at %lu MHz\n",
+		np, clk_hw_get_rate(&ksc->clks[K210_CLK_CPU].hw) / 1000000);
+}
+
+CLK_OF_DECLARE(k210_clk, "canaan,k210-clk", k210_clk_init);
+
+/*
+ * Enable PLL1 to be able to use the AI SRAM.
+ */
+void __init k210_clk_early_init(void __iomem *regs)
+{
+	struct k210_pll pll1;
+
+	/* Make sure ACLK selector is set to PLL0 */
+	k210_aclk_set_selector(regs, 1);
+
+	/* Startup PLL1 to enable the aisram bank for general memory use */
+	k210_init_pll(regs, K210_PLL1, &pll1);
+	k210_pll_enable_hw(regs, &pll1);
+}

drivers/pinctrl/Kconfig

@@ -370,6 +370,19 @@ config PINCTRL_MICROCHIP_SGPIO
 	  connect control signals from SFP modules and to act as an
 	  LED controller.
 
+config PINCTRL_K210
+	bool "Pinctrl driver for the Canaan Kendryte K210 SoC"
+	depends on RISCV && SOC_CANAAN && OF
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	select GPIOLIB
+	select OF_GPIO
+	select REGMAP_MMIO
+	default SOC_CANAAN
+	help
+	  Add support for the Canaan Kendryte K210 RISC-V SOC Field
+	  Programmable IO Array (FPIOA) controller.
+
 source "drivers/pinctrl/actions/Kconfig"
 source "drivers/pinctrl/aspeed/Kconfig"
 source "drivers/pinctrl/bcm/Kconfig"

drivers/pinctrl/Makefile

@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_RK805)	+= pinctrl-rk805.o
 obj-$(CONFIG_PINCTRL_OCELOT)	+= pinctrl-ocelot.o
 obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO)	+= pinctrl-microchip-sgpio.o
 obj-$(CONFIG_PINCTRL_EQUILIBRIUM)   += pinctrl-equilibrium.o
+obj-$(CONFIG_PINCTRL_K210)	+= pinctrl-k210.o
 
 obj-y				+= actions/
 obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/

drivers/pinctrl/pinctrl-k210.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/io.h>
+
+#include <dt-bindings/pinctrl/k210-fpioa.h>
+
+#include "core.h"
+#include "pinconf.h"
+#include "pinctrl-utils.h"
+
+/*
+ * The K210 only implements 8 drive levels, even though
+ * there is register space for 16
+ */
+#define K210_PC_DRIVE_MASK	GENMASK(11, 8)
+#define K210_PC_DRIVE_SHIFT	8
+#define K210_PC_DRIVE_0		(0 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_1		(1 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_2		(2 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_3		(3 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_4		(4 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_5		(5 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_6		(6 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_7		(7 << K210_PC_DRIVE_SHIFT)
+#define K210_PC_DRIVE_MAX	7
+#define K210_PC_MODE_MASK	GENMASK(23, 12)
+
+/*
+ * output enabled == PC_OE & (PC_OE_INV ^ FUNCTION_OE)
+ * where FUNCTION_OE is a physical signal from the function.
+ */
+#define K210_PC_OE		BIT(12) /* Output Enable */
+#define K210_PC_OE_INV		BIT(13) /* INVert Output Enable */
+#define K210_PC_DO_OE		BIT(14) /* set Data Out to Output Enable sig */
+#define K210_PC_DO_INV		BIT(15) /* INVert final Data Output */
+#define K210_PC_PU		BIT(16) /* Pull Up */
+#define K210_PC_PD		BIT(17) /* Pull Down */
+/* Strong pull up not implemented on K210 */
+#define K210_PC_SL		BIT(19) /* reduce SLew rate */
+/* Same semantics as OE above */
+#define K210_PC_IE		BIT(20) /* Input Enable */
+#define K210_PC_IE_INV		BIT(21) /* INVert Input Enable */
+#define K210_PC_DI_INV		BIT(22) /* INVert Data Input */
+#define K210_PC_ST		BIT(23) /* Schmitt Trigger */
+#define K210_PC_DI		BIT(31) /* raw Data Input */
+
+#define K210_PC_BIAS_MASK	(K210_PC_PU & K210_PC_PD)
+
+#define K210_PC_MODE_IN		(K210_PC_IE | K210_PC_ST)
+#define K210_PC_MODE_OUT	(K210_PC_DRIVE_7 | K210_PC_OE)
+#define K210_PC_MODE_I2C	(K210_PC_MODE_IN | K210_PC_SL | \
+				 K210_PC_OE | K210_PC_PU)
+#define K210_PC_MODE_SCCB	(K210_PC_MODE_I2C | \
+				 K210_PC_OE_INV | K210_PC_IE_INV)
+#define K210_PC_MODE_SPI	(K210_PC_MODE_IN | K210_PC_IE_INV | \
+				 K210_PC_MODE_OUT | K210_PC_OE_INV)
+#define K210_PC_MODE_GPIO	(K210_PC_MODE_IN | K210_PC_MODE_OUT)
+
+#define K210_PG_FUNC		GENMASK(7, 0)
+#define K210_PG_DO		BIT(8)
+#define K210_PG_PIN		GENMASK(22, 16)
+
+/*
+ * struct k210_fpioa: Kendryte K210 FPIOA memory mapped registers
+ * @pins: 48 32-bits IO pin registers
+ * @tie_en: 256 (one per function) input tie enable bits
+ * @tie_val: 256 (one per function) input tie value bits
+ */
+struct k210_fpioa {
+	u32 pins[48];
+	u32 tie_en[8];
+	u32 tie_val[8];
+};
+
+struct k210_fpioa_data {
+
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+
+	struct k210_fpioa __iomem *fpioa;
+	struct regmap *sysctl_map;
+	u32 power_offset;
+	struct clk *clk;
+	struct clk *pclk;
+};
+
+#define K210_PIN_NAME(i)	("IO_" #i)
+#define K210_PIN(i)		[(i)] = PINCTRL_PIN((i), K210_PIN_NAME(i))
+
+static const struct pinctrl_pin_desc k210_pins[] = {
+	K210_PIN(0),  K210_PIN(1),  K210_PIN(2),
+	K210_PIN(3),  K210_PIN(4),  K210_PIN(5),
+	K210_PIN(6),  K210_PIN(7),  K210_PIN(8),
+	K210_PIN(9),  K210_PIN(10), K210_PIN(11),
+	K210_PIN(12), K210_PIN(13), K210_PIN(14),
+	K210_PIN(15), K210_PIN(16), K210_PIN(17),
+	K210_PIN(18), K210_PIN(19), K210_PIN(20),
+	K210_PIN(21), K210_PIN(22), K210_PIN(23),
+	K210_PIN(24), K210_PIN(25), K210_PIN(26),
+	K210_PIN(27), K210_PIN(28), K210_PIN(29),
+	K210_PIN(30), K210_PIN(31), K210_PIN(32),
+	K210_PIN(33), K210_PIN(34), K210_PIN(35),
+	K210_PIN(36), K210_PIN(37), K210_PIN(38),
+	K210_PIN(39), K210_PIN(40), K210_PIN(41),
+	K210_PIN(42), K210_PIN(43), K210_PIN(44),
+	K210_PIN(45), K210_PIN(46), K210_PIN(47)
+};
+
+#define K210_NPINS ARRAY_SIZE(k210_pins)
+
+/*
+ * Pin groups: each of the 48 programmable pins is a group.
+ * To this are added 8 power domain groups, which for the purposes of
+ * the pin subsystem, contain no pins. The power domain groups only exist
+ * to set the power level. The id should never be used (since there are
+ * no pins 48-55).
+ */
+static const char *const k210_group_names[] = {
+	/* The first 48 groups are for pins, one each */
+	K210_PIN_NAME(0),  K210_PIN_NAME(1),  K210_PIN_NAME(2),
+	K210_PIN_NAME(3),  K210_PIN_NAME(4),  K210_PIN_NAME(5),
+	K210_PIN_NAME(6),  K210_PIN_NAME(7),  K210_PIN_NAME(8),
+	K210_PIN_NAME(9),  K210_PIN_NAME(10), K210_PIN_NAME(11),
+	K210_PIN_NAME(12), K210_PIN_NAME(13), K210_PIN_NAME(14),
+	K210_PIN_NAME(15), K210_PIN_NAME(16), K210_PIN_NAME(17),
+	K210_PIN_NAME(18), K210_PIN_NAME(19), K210_PIN_NAME(20),
+	K210_PIN_NAME(21), K210_PIN_NAME(22), K210_PIN_NAME(23),
+	K210_PIN_NAME(24), K210_PIN_NAME(25), K210_PIN_NAME(26),
+	K210_PIN_NAME(27), K210_PIN_NAME(28), K210_PIN_NAME(29),
+	K210_PIN_NAME(30), K210_PIN_NAME(31), K210_PIN_NAME(32),
+	K210_PIN_NAME(33), K210_PIN_NAME(34), K210_PIN_NAME(35),
+	K210_PIN_NAME(36), K210_PIN_NAME(37), K210_PIN_NAME(38),
+	K210_PIN_NAME(39), K210_PIN_NAME(40), K210_PIN_NAME(41),
+	K210_PIN_NAME(42), K210_PIN_NAME(43), K210_PIN_NAME(44),
+	K210_PIN_NAME(45), K210_PIN_NAME(46), K210_PIN_NAME(47),
+	[48] = "A0", [49] = "A1", [50] = "A2",
+	[51] = "B3", [52] = "B4", [53] = "B5",
+	[54] = "C6", [55] = "C7"
+};
+
+#define K210_NGROUPS	ARRAY_SIZE(k210_group_names)
+
+enum k210_pinctrl_mode_id {
+	K210_PC_DEFAULT_DISABLED,
+	K210_PC_DEFAULT_IN,
+	K210_PC_DEFAULT_IN_TIE,
+	K210_PC_DEFAULT_OUT,
+	K210_PC_DEFAULT_I2C,
+	K210_PC_DEFAULT_SCCB,
+	K210_PC_DEFAULT_SPI,
+	K210_PC_DEFAULT_GPIO,
+	K210_PC_DEFAULT_INT13,
+};
+
+#define K210_PC_DEFAULT(mode) \
+	[K210_PC_DEFAULT_##mode] = K210_PC_MODE_##mode
+
+static const u32 k210_pinconf_mode_id_to_mode[] = {
+	[K210_PC_DEFAULT_DISABLED] = 0,
+	K210_PC_DEFAULT(IN),
+	[K210_PC_DEFAULT_IN_TIE] = K210_PC_MODE_IN,
+	K210_PC_DEFAULT(OUT),
+	K210_PC_DEFAULT(I2C),
+	K210_PC_DEFAULT(SCCB),
+	K210_PC_DEFAULT(SPI),
+	K210_PC_DEFAULT(GPIO),
+	[K210_PC_DEFAULT_INT13] = K210_PC_MODE_IN | K210_PC_PU,
+};
+
+#undef DEFAULT
+
+/*
+ * Pin functions configuration information.
+ */
+struct k210_pcf_info {
+	char name[15];
+	u8 mode_id;
+};
+
+#define K210_FUNC(id, mode)				\
+	[K210_PCF_##id] = {				\
+		.name = #id,				\
+		.mode_id = K210_PC_DEFAULT_##mode	\
+	}
+
+static const struct k210_pcf_info k210_pcf_infos[] = {
+	K210_FUNC(JTAG_TCLK,		IN),
+	K210_FUNC(JTAG_TDI,		IN),
+	K210_FUNC(JTAG_TMS,		IN),
+	K210_FUNC(JTAG_TDO,		OUT),
+	K210_FUNC(SPI0_D0,		SPI),
+	K210_FUNC(SPI0_D1,		SPI),
+	K210_FUNC(SPI0_D2,		SPI),
+	K210_FUNC(SPI0_D3,		SPI),
+	K210_FUNC(SPI0_D4,		SPI),
+	K210_FUNC(SPI0_D5,		SPI),
+	K210_FUNC(SPI0_D6,		SPI),
+	K210_FUNC(SPI0_D7,		SPI),
+	K210_FUNC(SPI0_SS0,		OUT),
+	K210_FUNC(SPI0_SS1,		OUT),
+	K210_FUNC(SPI0_SS2,		OUT),
+	K210_FUNC(SPI0_SS3,		OUT),
+	K210_FUNC(SPI0_ARB,		IN_TIE),
+	K210_FUNC(SPI0_SCLK,		OUT),
+	K210_FUNC(UARTHS_RX,		IN),
+	K210_FUNC(UARTHS_TX,		OUT),
+	K210_FUNC(RESV6,		IN),
+	K210_FUNC(RESV7,		IN),
+	K210_FUNC(CLK_SPI1,		OUT),
+	K210_FUNC(CLK_I2C1,		OUT),
+	K210_FUNC(GPIOHS0,		GPIO),
+	K210_FUNC(GPIOHS1,		GPIO),
+	K210_FUNC(GPIOHS2,		GPIO),
+	K210_FUNC(GPIOHS3,		GPIO),
+	K210_FUNC(GPIOHS4,		GPIO),
+	K210_FUNC(GPIOHS5,		GPIO),
+	K210_FUNC(GPIOHS6,		GPIO),
+	K210_FUNC(GPIOHS7,		GPIO),
+	K210_FUNC(GPIOHS8,		GPIO),
+	K210_FUNC(GPIOHS9,		GPIO),
+	K210_FUNC(GPIOHS10,		GPIO),
+	K210_FUNC(GPIOHS11,		GPIO),
+	K210_FUNC(GPIOHS12,		GPIO),
+	K210_FUNC(GPIOHS13,		GPIO),
+	K210_FUNC(GPIOHS14,		GPIO),
+	K210_FUNC(GPIOHS15,		GPIO),
+	K210_FUNC(GPIOHS16,		GPIO),
+	K210_FUNC(GPIOHS17,		GPIO),
+	K210_FUNC(GPIOHS18,		GPIO),
+	K210_FUNC(GPIOHS19,		GPIO),
+	K210_FUNC(GPIOHS20,		GPIO),
+	K210_FUNC(GPIOHS21,		GPIO),
+	K210_FUNC(GPIOHS22,		GPIO),
+	K210_FUNC(GPIOHS23,		GPIO),
+	K210_FUNC(GPIOHS24,		GPIO),
+	K210_FUNC(GPIOHS25,		GPIO),
+	K210_FUNC(GPIOHS26,		GPIO),
+	K210_FUNC(GPIOHS27,		GPIO),
+	K210_FUNC(GPIOHS28,		GPIO),
+	K210_FUNC(GPIOHS29,		GPIO),
+	K210_FUNC(GPIOHS30,		GPIO),
+	K210_FUNC(GPIOHS31,		GPIO),
+	K210_FUNC(GPIO0,		GPIO),
+	K210_FUNC(GPIO1,		GPIO),
+	K210_FUNC(GPIO2,		GPIO),
+	K210_FUNC(GPIO3,		GPIO),
+	K210_FUNC(GPIO4,		GPIO),
+	K210_FUNC(GPIO5,		GPIO),
+	K210_FUNC(GPIO6,		GPIO),
+	K210_FUNC(GPIO7,		GPIO),
+	K210_FUNC(UART1_RX,		IN),
+	K210_FUNC(UART1_TX,		OUT),
+	K210_FUNC(UART2_RX,		IN),
+	K210_FUNC(UART2_TX,		OUT),
+	K210_FUNC(UART3_RX,		IN),
+	K210_FUNC(UART3_TX,		OUT),
+	K210_FUNC(SPI1_D0,		SPI),
+	K210_FUNC(SPI1_D1,		SPI),
+	K210_FUNC(SPI1_D2,		SPI),
+	K210_FUNC(SPI1_D3,		SPI),
+	K210_FUNC(SPI1_D4,		SPI),
+	K210_FUNC(SPI1_D5,		SPI),
+	K210_FUNC(SPI1_D6,		SPI),
+	K210_FUNC(SPI1_D7,		SPI),
+	K210_FUNC(SPI1_SS0,		OUT),
+	K210_FUNC(SPI1_SS1,		OUT),
+	K210_FUNC(SPI1_SS2,		OUT),
+	K210_FUNC(SPI1_SS3,		OUT),
+	K210_FUNC(SPI1_ARB,		IN_TIE),
+	K210_FUNC(SPI1_SCLK,		OUT),
+	K210_FUNC(SPI2_D0,		SPI),
+	K210_FUNC(SPI2_SS,		IN),
+	K210_FUNC(SPI2_SCLK,		IN),
+	K210_FUNC(I2S0_MCLK,		OUT),
+	K210_FUNC(I2S0_SCLK,		OUT),
+	K210_FUNC(I2S0_WS,		OUT),
+	K210_FUNC(I2S0_IN_D0,		IN),
+	K210_FUNC(I2S0_IN_D1,		IN),
+	K210_FUNC(I2S0_IN_D2,		IN),
+	K210_FUNC(I2S0_IN_D3,		IN),
+	K210_FUNC(I2S0_OUT_D0,		OUT),
+	K210_FUNC(I2S0_OUT_D1,		OUT),
+	K210_FUNC(I2S0_OUT_D2,		OUT),
+	K210_FUNC(I2S0_OUT_D3,		OUT),
+	K210_FUNC(I2S1_MCLK,		OUT),
+	K210_FUNC(I2S1_SCLK,		OUT),
+	K210_FUNC(I2S1_WS,		OUT),
+	K210_FUNC(I2S1_IN_D0,		IN),
+	K210_FUNC(I2S1_IN_D1,		IN),
+	K210_FUNC(I2S1_IN_D2,		IN),
+	K210_FUNC(I2S1_IN_D3,		IN),
+	K210_FUNC(I2S1_OUT_D0,		OUT),
+	K210_FUNC(I2S1_OUT_D1,		OUT),
+	K210_FUNC(I2S1_OUT_D2,		OUT),
+	K210_FUNC(I2S1_OUT_D3,		OUT),
+	K210_FUNC(I2S2_MCLK,		OUT),
+	K210_FUNC(I2S2_SCLK,		OUT),
+	K210_FUNC(I2S2_WS,		OUT),
+	K210_FUNC(I2S2_IN_D0,		IN),
+	K210_FUNC(I2S2_IN_D1,		IN),
+	K210_FUNC(I2S2_IN_D2,		IN),
+	K210_FUNC(I2S2_IN_D3,		IN),
+	K210_FUNC(I2S2_OUT_D0,		OUT),
+	K210_FUNC(I2S2_OUT_D1,		OUT),
+	K210_FUNC(I2S2_OUT_D2,		OUT),
+	K210_FUNC(I2S2_OUT_D3,		OUT),
+	K210_FUNC(RESV0,		DISABLED),
+	K210_FUNC(RESV1,		DISABLED),
+	K210_FUNC(RESV2,		DISABLED),
+	K210_FUNC(RESV3,		DISABLED),
+	K210_FUNC(RESV4,		DISABLED),
+	K210_FUNC(RESV5,		DISABLED),
+	K210_FUNC(I2C0_SCLK,		I2C),
+	K210_FUNC(I2C0_SDA,		I2C),
+	K210_FUNC(I2C1_SCLK,		I2C),
+	K210_FUNC(I2C1_SDA,		I2C),
+	K210_FUNC(I2C2_SCLK,		I2C),
+	K210_FUNC(I2C2_SDA,		I2C),
+	K210_FUNC(DVP_XCLK,		OUT),
+	K210_FUNC(DVP_RST,		OUT),
+	K210_FUNC(DVP_PWDN,		OUT),
+	K210_FUNC(DVP_VSYNC,		IN),
+	K210_FUNC(DVP_HSYNC,		IN),
+	K210_FUNC(DVP_PCLK,		IN),
+	K210_FUNC(DVP_D0,		IN),
+	K210_FUNC(DVP_D1,		IN),
+	K210_FUNC(DVP_D2,		IN),
+	K210_FUNC(DVP_D3,		IN),
+	K210_FUNC(DVP_D4,		IN),
+	K210_FUNC(DVP_D5,		IN),
+	K210_FUNC(DVP_D6,		IN),
+	K210_FUNC(DVP_D7,		IN),
+	K210_FUNC(SCCB_SCLK,		SCCB),
+	K210_FUNC(SCCB_SDA,		SCCB),
+	K210_FUNC(UART1_CTS,		IN),
+	K210_FUNC(UART1_DSR,		IN),
+	K210_FUNC(UART1_DCD,		IN),
+	K210_FUNC(UART1_RI,		IN),
+	K210_FUNC(UART1_SIR_IN,		IN),
+	K210_FUNC(UART1_DTR,		OUT),
+	K210_FUNC(UART1_RTS,		OUT),
+	K210_FUNC(UART1_OUT2,		OUT),
+	K210_FUNC(UART1_OUT1,		OUT),
+	K210_FUNC(UART1_SIR_OUT,	OUT),
+	K210_FUNC(UART1_BAUD,		OUT),
+	K210_FUNC(UART1_RE,		OUT),
+	K210_FUNC(UART1_DE,		OUT),
+	K210_FUNC(UART1_RS485_EN,	OUT),
+	K210_FUNC(UART2_CTS,		IN),
+	K210_FUNC(UART2_DSR,		IN),
+	K210_FUNC(UART2_DCD,		IN),
+	K210_FUNC(UART2_RI,		IN),
+	K210_FUNC(UART2_SIR_IN,		IN),
+	K210_FUNC(UART2_DTR,		OUT),
+	K210_FUNC(UART2_RTS,		OUT),
+	K210_FUNC(UART2_OUT2,		OUT),
+	K210_FUNC(UART2_OUT1,		OUT),
+	K210_FUNC(UART2_SIR_OUT,	OUT),
+	K210_FUNC(UART2_BAUD,		OUT),
+	K210_FUNC(UART2_RE,		OUT),
+	K210_FUNC(UART2_DE,		OUT),
+	K210_FUNC(UART2_RS485_EN,	OUT),
+	K210_FUNC(UART3_CTS,		IN),
+	K210_FUNC(UART3_DSR,		IN),
+	K210_FUNC(UART3_DCD,		IN),
+	K210_FUNC(UART3_RI,		IN),
+	K210_FUNC(UART3_SIR_IN,		IN),
+	K210_FUNC(UART3_DTR,		OUT),
+	K210_FUNC(UART3_RTS,		OUT),
+	K210_FUNC(UART3_OUT2,		OUT),
+	K210_FUNC(UART3_OUT1,		OUT),
+	K210_FUNC(UART3_SIR_OUT,	OUT),
+	K210_FUNC(UART3_BAUD,		OUT),
+	K210_FUNC(UART3_RE,		OUT),
+	K210_FUNC(UART3_DE,		OUT),
+	K210_FUNC(UART3_RS485_EN,	OUT),
+	K210_FUNC(TIMER0_TOGGLE1,	OUT),
+	K210_FUNC(TIMER0_TOGGLE2,	OUT),
+	K210_FUNC(TIMER0_TOGGLE3,	OUT),
+	K210_FUNC(TIMER0_TOGGLE4,	OUT),
+	K210_FUNC(TIMER1_TOGGLE1,	OUT),
+	K210_FUNC(TIMER1_TOGGLE2,	OUT),
+	K210_FUNC(TIMER1_TOGGLE3,	OUT),
+	K210_FUNC(TIMER1_TOGGLE4,	OUT),
+	K210_FUNC(TIMER2_TOGGLE1,	OUT),
+	K210_FUNC(TIMER2_TOGGLE2,	OUT),
+	K210_FUNC(TIMER2_TOGGLE3,	OUT),
+	K210_FUNC(TIMER2_TOGGLE4,	OUT),
+	K210_FUNC(CLK_SPI2,		OUT),
+	K210_FUNC(CLK_I2C2,		OUT),
+	K210_FUNC(INTERNAL0,		OUT),
+	K210_FUNC(INTERNAL1,		OUT),
+	K210_FUNC(INTERNAL2,		OUT),
+	K210_FUNC(INTERNAL3,		OUT),
+	K210_FUNC(INTERNAL4,		OUT),
+	K210_FUNC(INTERNAL5,		OUT),
+	K210_FUNC(INTERNAL6,		OUT),
+	K210_FUNC(INTERNAL7,		OUT),
+	K210_FUNC(INTERNAL8,		OUT),
+	K210_FUNC(INTERNAL9,		IN),
+	K210_FUNC(INTERNAL10,		IN),
+	K210_FUNC(INTERNAL11,		IN),
+	K210_FUNC(INTERNAL12,		IN),
+	K210_FUNC(INTERNAL13,		INT13),
+	K210_FUNC(INTERNAL14,		I2C),
+	K210_FUNC(INTERNAL15,		IN),
+	K210_FUNC(INTERNAL16,		IN),
+	K210_FUNC(INTERNAL17,		IN),
+	K210_FUNC(CONSTANT,		DISABLED),
+	K210_FUNC(INTERNAL18,		IN),
+	K210_FUNC(DEBUG0,		OUT),
+	K210_FUNC(DEBUG1,		OUT),
+	K210_FUNC(DEBUG2,		OUT),
+	K210_FUNC(DEBUG3,		OUT),
+	K210_FUNC(DEBUG4,		OUT),
+	K210_FUNC(DEBUG5,		OUT),
+	K210_FUNC(DEBUG6,		OUT),
+	K210_FUNC(DEBUG7,		OUT),
+	K210_FUNC(DEBUG8,		OUT),
+	K210_FUNC(DEBUG9,		OUT),
+	K210_FUNC(DEBUG10,		OUT),
+	K210_FUNC(DEBUG11,		OUT),
+	K210_FUNC(DEBUG12,		OUT),
+	K210_FUNC(DEBUG13,		OUT),
+	K210_FUNC(DEBUG14,		OUT),
+	K210_FUNC(DEBUG15,		OUT),
+	K210_FUNC(DEBUG16,		OUT),
+	K210_FUNC(DEBUG17,		OUT),
+	K210_FUNC(DEBUG18,		OUT),
+	K210_FUNC(DEBUG19,		OUT),
+	K210_FUNC(DEBUG20,		OUT),
+	K210_FUNC(DEBUG21,		OUT),
+	K210_FUNC(DEBUG22,		OUT),
+	K210_FUNC(DEBUG23,		OUT),
+	K210_FUNC(DEBUG24,		OUT),
+	K210_FUNC(DEBUG25,		OUT),
+	K210_FUNC(DEBUG26,		OUT),
+	K210_FUNC(DEBUG27,		OUT),
+	K210_FUNC(DEBUG28,		OUT),
+	K210_FUNC(DEBUG29,		OUT),
+	K210_FUNC(DEBUG30,		OUT),
+	K210_FUNC(DEBUG31,		OUT),
+};
+
+#define PIN_CONFIG_OUTPUT_INVERT	(PIN_CONFIG_END + 1)
+#define PIN_CONFIG_INPUT_INVERT		(PIN_CONFIG_END + 2)
+
+static const struct pinconf_generic_params k210_pinconf_custom_params[] = {
+	{ "output-polarity-invert", PIN_CONFIG_OUTPUT_INVERT, 1 },
+	{ "input-polarity-invert",  PIN_CONFIG_INPUT_INVERT, 1 },
+};
+
+/*
+ * Max drive strength in uA.
+ */
+static const int k210_pinconf_drive_strength[] = {
+	[0] = 11200,
+	[1] = 16800,
+	[2] = 22300,
+	[3] = 27800,
+	[4] = 33300,
+	[5] = 38700,
+	[6] = 44100,
+	[7] = 49500,
+};
+
+static int k210_pinconf_get_drive(unsigned int max_strength_ua)
+{
+	int i;
+
+	for (i = K210_PC_DRIVE_MAX; i; i--) {
+		if (k210_pinconf_drive_strength[i] <= max_strength_ua)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static void k210_pinmux_set_pin_function(struct pinctrl_dev *pctldev,
+					 u32 pin, u32 func)
+{
+	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	const struct k210_pcf_info *info = &k210_pcf_infos[func];
+	u32 mode = k210_pinconf_mode_id_to_mode[info->mode_id];
+	u32 val = func | mode;
+
+	dev_dbg(pdata->dev, "set pin %u function %s (%u) -> 0x%08x\n",
+		pin, info->name, func, val);
+
+	writel(val, &pdata->fpioa->pins[pin]);
+}
+
+static int k210_pinconf_set_param(struct pinctrl_dev *pctldev,
+				  unsigned int pin,
+				  unsigned int param, unsigned int arg)
+{
+	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	u32 val = readl(&pdata->fpioa->pins[pin]);
+	int drive;
+
+	dev_dbg(pdata->dev, "set pin %u param %u, arg 0x%x\n",
+		pin, param, arg);
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		val &= ~K210_PC_BIAS_MASK;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (!arg)
+			return -EINVAL;
+		val |= K210_PC_PD;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (!arg)
+			return -EINVAL;
+		val |= K210_PC_PD;
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		arg *= 1000;
+		fallthrough;
+	case PIN_CONFIG_DRIVE_STRENGTH_UA:
+		drive = k210_pinconf_get_drive(arg);
+		if (drive < 0)
+			return drive;
+		val &= ~K210_PC_DRIVE_MASK;
+		val |= FIELD_PREP(K210_PC_DRIVE_MASK, drive);
+		break;
+	case PIN_CONFIG_INPUT_ENABLE:
+		if (arg)
+			val |= K210_PC_IE;
+		else
+			val &= ~K210_PC_IE;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		if (arg)
+			val |= K210_PC_ST;
+		else
+			val &= ~K210_PC_ST;
+		break;
+	case PIN_CONFIG_OUTPUT:
+		k210_pinmux_set_pin_function(pctldev, pin, K210_PCF_CONSTANT);
+		val = readl(&pdata->fpioa->pins[pin]);
+		val |= K210_PC_MODE_OUT;
+		if (!arg)
+			val |= K210_PC_DO_INV;
+		break;
+	case PIN_CONFIG_OUTPUT_ENABLE:
+		if (arg)
+			val |= K210_PC_OE;
+		else
+			val &= ~K210_PC_OE;
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		if (arg)
+			val |= K210_PC_SL;
+		else
+			val &= ~K210_PC_SL;
+		break;
+	case PIN_CONFIG_OUTPUT_INVERT:
+		if (arg)
+			val |= K210_PC_DO_INV;
+		else
+			val &= ~K210_PC_DO_INV;
+		break;
+	case PIN_CONFIG_INPUT_INVERT:
+		if (arg)
+			val |= K210_PC_DI_INV;
+		else
+			val &= ~K210_PC_DI_INV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(val, &pdata->fpioa->pins[pin]);
+
+	return 0;
+}
+
+static int k210_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+			    unsigned long *configs, unsigned int num_configs)
+{
+	unsigned int param, arg;
+	int i, ret;
+
+	if (WARN_ON(pin >= K210_NPINS))
+		return -EINVAL;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+		ret = k210_pinconf_set_param(pctldev, pin, param, arg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void k210_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				  struct seq_file *s, unsigned int pin)
+{
+	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	seq_printf(s, "%#x", readl(&pdata->fpioa->pins[pin]));
+}
+
+static int k210_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned int selector, unsigned long *configs,
+				  unsigned int num_configs)
+{
+	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	unsigned int param, arg;
+	u32 bit;
+	int i;
+
+	/* Pins should be configured with pinmux, not groups*/
+	if (selector < K210_NPINS)
+		return -EINVAL;
+
+	/* Otherwise it's a power domain */
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		if (param != PIN_CONFIG_POWER_SOURCE)
+			return -EINVAL;
+
+		arg = pinconf_to_config_argument(configs[i]);
+		bit = BIT(selector - K210_NPINS);
+		regmap_update_bits(pdata->sysctl_map,
+				   pdata->power_offset,
+				   bit, arg ? bit : 0);
+	}
+
+	return 0;
+}
+
+static void k210_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s,
+					unsigned int selector)
+{
+	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int ret;
+	u32 val;
+
+	if (selector < K210_NPINS)
+		return k210_pinconf_dbg_show(pctldev, s, selector);
+
+	ret = regmap_read(pdata->sysctl_map, pdata->power_offset, &val);
+	if (ret) {
+		dev_err(pdata->dev, "Failed to read power reg\n");
+		return;
+	}
+
+	seq_printf(s, "%s: %s V", k210_group_names[selector],
+		   val & BIT(selector - K210_NPINS) ? "1.8" : "3.3");
+}
+
+static const struct pinconf_ops k210_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_set = k210_pinconf_set,
+	.pin_config_group_set = k210_pinconf_group_set,
+	.pin_config_dbg_show = k210_pinconf_dbg_show,
+	.pin_config_group_dbg_show = k210_pinconf_group_dbg_show,
+};
+
+static int k210_pinmux_get_function_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(k210_pcf_infos);
+}
+
+static const char *k210_pinmux_get_function_name(struct pinctrl_dev *pctldev,
+						 unsigned int selector)
+{
+	return k210_pcf_infos[selector].name;
+}
+
+static int k210_pinmux_get_function_groups(struct pinctrl_dev *pctldev,
+					   unsigned int selector,
+					   const char * const **groups,
+					   unsigned int * const num_groups)
+{
+	/* Any function can be mapped to any pin */
+	*groups = k210_group_names;
+	*num_groups = K210_NPINS;
+
+	return 0;
+}
+
+static int k210_pinmux_set_mux(struct pinctrl_dev *pctldev,
+			       unsigned int function,
+			       unsigned int group)
+{
+	/* Can't mux power domains */
+	if (group >= K210_NPINS)
+		return -EINVAL;
+
+	k210_pinmux_set_pin_function(pctldev, group, function);
+
+	return 0;
+}
+
+static const struct pinmux_ops k210_pinmux_ops = {
+	.get_functions_count = k210_pinmux_get_function_count,
+	.get_function_name = k210_pinmux_get_function_name,
+	.get_function_groups = k210_pinmux_get_function_groups,
+	.set_mux = k210_pinmux_set_mux,
+	.strict = true,
+};
+
+static int k210_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return K210_NGROUPS;
+}
+
+static const char *k210_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+					       unsigned int group)
+{
+	return k210_group_names[group];
+}
+
+static int k210_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				       unsigned int group,
+				       const unsigned int **pins,
+				       unsigned int *npins)
+{
+	if (group >= K210_NPINS) {
+		*pins = NULL;
+		*npins = 0;
+		return 0;
+	}
+
+	*pins = &k210_pins[group].number;
+	*npins = 1;
+
+	return 0;
+}
+
+static void k210_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+				      struct seq_file *s, unsigned int offset)
+{
+	seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static int k210_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+					  struct device_node *np,
+					  struct pinctrl_map **map,
+					  unsigned int *reserved_maps,
+					  unsigned int *num_maps)
+{
+	struct property *prop;
+	const __be32 *p;
+	int ret, pinmux_groups;
+	u32 pinmux_group;
+	unsigned long *configs = NULL;
+	unsigned int num_configs = 0;
+	unsigned int reserve = 0;
+
+	ret = of_property_count_strings(np, "groups");
+	if (!ret)
+		return pinconf_generic_dt_subnode_to_map(pctldev, np, map,
+						reserved_maps, num_maps,
+						PIN_MAP_TYPE_CONFIGS_GROUP);
+
+	pinmux_groups = of_property_count_u32_elems(np, "pinmux");
+	if (pinmux_groups <= 0) {
+		/* Ignore this node */
+		return 0;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
+	if (ret < 0) {
+		dev_err(pctldev->dev, "%pOF: could not parse node property\n",
+			np);
+		return ret;
+	}
+
+	reserve = pinmux_groups * (1 + num_configs);
+	ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
+					reserve);
+	if (ret < 0)
+		goto exit;
+
+	of_property_for_each_u32(np, "pinmux", prop, p, pinmux_group) {
+		const char *group_name, *func_name;
+		u32 pin = FIELD_GET(K210_PG_PIN, pinmux_group);
+		u32 func = FIELD_GET(K210_PG_FUNC, pinmux_group);
+
+		if (pin >= K210_NPINS) {
+			ret = -EINVAL;
+			goto exit;
+		}
+
+		group_name = k210_group_names[pin];
+		func_name = k210_pcf_infos[func].name;
+
+		dev_dbg(pctldev->dev, "Pinmux %s: pin %u func %s\n",
+			np->name, pin, func_name);
+
+		ret = pinctrl_utils_add_map_mux(pctldev, map, reserved_maps,
+						num_maps, group_name,
+						func_name);
+		if (ret < 0) {
+			dev_err(pctldev->dev, "%pOF add mux map failed %d\n",
+				np, ret);
+			goto exit;
+		}
+
+		if (num_configs) {
+			ret = pinctrl_utils_add_map_configs(pctldev, map,
+					reserved_maps, num_maps, group_name,
+					configs, num_configs,
+					PIN_MAP_TYPE_CONFIGS_PIN);
+			if (ret < 0) {
+				dev_err(pctldev->dev,
+					"%pOF add configs map failed %d\n",
+					np, ret);
+				goto exit;
+			}
+		}
+	}
+
+	ret = 0;
+
+exit:
+	kfree(configs);
+	return ret;
+}
+
+static int k210_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+				       struct device_node *np_config,
+				       struct pinctrl_map **map,
+				       unsigned int *num_maps)
+{
+	unsigned int reserved_maps;
+	struct device_node *np;
+	int ret;
+
+	reserved_maps = 0;
+	*map = NULL;
+	*num_maps = 0;
+
+	ret = k210_pinctrl_dt_subnode_to_map(pctldev, np_config, map,
+					     &reserved_maps, num_maps);
+	if (ret < 0)
+		goto err;
+
+	for_each_available_child_of_node(np_config, np) {
+		ret = k210_pinctrl_dt_subnode_to_map(pctldev, np, map,
+						     &reserved_maps, num_maps);
+		if (ret < 0)
+			goto err;
+	}
+	return 0;
+
+err:
+	pinctrl_utils_free_map(pctldev, *map, *num_maps);
+	return ret;
+}
+
+
+static const struct pinctrl_ops k210_pinctrl_ops = {
+	.get_groups_count = k210_pinctrl_get_groups_count,
+	.get_group_name = k210_pinctrl_get_group_name,
+	.get_group_pins = k210_pinctrl_get_group_pins,
+	.pin_dbg_show = k210_pinctrl_pin_dbg_show,
+	.dt_node_to_map = k210_pinctrl_dt_node_to_map,
+	.dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static struct pinctrl_desc k210_pinctrl_desc = {
+	.name = "k210-pinctrl",
+	.pins = k210_pins,
+	.npins = K210_NPINS,
+	.pctlops = &k210_pinctrl_ops,
+	.pmxops = &k210_pinmux_ops,
+	.confops = &k210_pinconf_ops,
+	.custom_params = k210_pinconf_custom_params,
+	.num_custom_params = ARRAY_SIZE(k210_pinconf_custom_params),
+};
+
+static void k210_fpioa_init_ties(struct k210_fpioa_data *pdata)
+{
+	struct k210_fpioa __iomem *fpioa = pdata->fpioa;
+	u32 val;
+	int i, j;
+
+	dev_dbg(pdata->dev, "Init pin ties\n");
+
+	/* Init pin functions input ties */
+	for (i = 0; i < ARRAY_SIZE(fpioa->tie_en); i++) {
+		val = 0;
+		for (j = 0; j < 32; j++) {
+			if (k210_pcf_infos[i * 32 + j].mode_id ==
+			    K210_PC_DEFAULT_IN_TIE) {
+				dev_dbg(pdata->dev,
+					"tie_en function %d (%s)\n",
+					i * 32 + j,
+					k210_pcf_infos[i * 32 + j].name);
+				val |= BIT(j);
+			}
+		}
+
+		/* Set value before enable */
+		writel(val, &fpioa->tie_val[i]);
+		writel(val, &fpioa->tie_en[i]);
+	}
+}
+
+static int k210_fpioa_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct k210_fpioa_data *pdata;
+	int ret;
+
+	dev_info(dev, "K210 FPIOA pin controller\n");
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->dev = dev;
+	platform_set_drvdata(pdev, pdata);
+
+	pdata->fpioa = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pdata->fpioa))
+		return PTR_ERR(pdata->fpioa);
+
+	pdata->clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(pdata->clk))
+		return PTR_ERR(pdata->clk);
+
+	ret = clk_prepare_enable(pdata->clk);
+	if (ret)
+		return ret;
+
+	pdata->pclk = devm_clk_get_optional(dev, "pclk");
+	if (!IS_ERR(pdata->pclk))
+		clk_prepare_enable(pdata->pclk);
+
+	pdata->sysctl_map =
+		syscon_regmap_lookup_by_phandle_args(np,
+						"canaan,k210-sysctl-power",
+						1, &pdata->power_offset);
+	if (IS_ERR(pdata->sysctl_map))
+		return PTR_ERR(pdata->sysctl_map);
+
+	k210_fpioa_init_ties(pdata);
+
+	pdata->pctl = pinctrl_register(&k210_pinctrl_desc, dev, (void *)pdata);
+	if (IS_ERR(pdata->pctl))
+		return PTR_ERR(pdata->pctl);
+
+	return 0;
+}
+
+static const struct of_device_id k210_fpioa_dt_ids[] = {
+	{ .compatible = "canaan,k210-fpioa" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver k210_fpioa_driver = {
+	.probe	= k210_fpioa_probe,
+	.driver = {
+		.name		= "k210-fpioa",
+		.of_match_table	= k210_fpioa_dt_ids,
+	},
+};
+builtin_platform_driver(k210_fpioa_driver);

drivers/reset/Kconfig

@@ -89,6 +89,16 @@ config RESET_INTEL_GW
 	  Say Y to control the reset signals provided by reset controller.
 	  Otherwise, say N.
 
+config RESET_K210
+	bool "Reset controller driver for Canaan Kendryte K210 SoC"
+	depends on (SOC_CANAAN || COMPILE_TEST) && OF
+	select MFD_SYSCON
+	default SOC_CANAAN
+	help
+	  Support for the Canaan Kendryte K210 RISC-V SoC reset controller.
+	  Say Y if you want to control reset signals provided by this
+	  controller.
+
 config RESET_LANTIQ
 	bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
 	default SOC_TYPE_XWAY

drivers/reset/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o
 obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
+obj-$(CONFIG_RESET_K210) += reset-k210.o
 obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o

drivers/reset/reset-k210.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <soc/canaan/k210-sysctl.h>
+
+#include <dt-bindings/reset/k210-rst.h>
+
+#define K210_RST_MASK	0x27FFFFFF
+
+struct k210_rst {
+	struct regmap *map;
+	struct reset_controller_dev rcdev;
+};
+
+static inline struct k210_rst *
+to_k210_rst(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct k210_rst, rcdev);
+}
+
+static inline int k210_rst_assert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct k210_rst *ksr = to_k210_rst(rcdev);
+
+	return regmap_update_bits(ksr->map, K210_SYSCTL_PERI_RESET, BIT(id), 1);
+}
+
+static inline int k210_rst_deassert(struct reset_controller_dev *rcdev,
+				    unsigned long id)
+{
+	struct k210_rst *ksr = to_k210_rst(rcdev);
+
+	return regmap_update_bits(ksr->map, K210_SYSCTL_PERI_RESET, BIT(id), 0);
+}
+
+static int k210_rst_reset(struct reset_controller_dev *rcdev,
+			  unsigned long id)
+{
+	int ret;
+
+	ret = k210_rst_assert(rcdev, id);
+	if (ret == 0) {
+		udelay(10);
+		ret = k210_rst_deassert(rcdev, id);
+	}
+
+	return ret;
+}
+
+static int k210_rst_status(struct reset_controller_dev *rcdev,
+			   unsigned long id)
+{
+	struct k210_rst *ksr = to_k210_rst(rcdev);
+	u32 reg, bit = BIT(id);
+	int ret;
+
+	ret = regmap_read(ksr->map, K210_SYSCTL_PERI_RESET, &reg);
+	if (ret)
+		return ret;
+
+	return reg & bit;
+}
+
+static int k210_rst_xlate(struct reset_controller_dev *rcdev,
+			  const struct of_phandle_args *reset_spec)
+{
+	unsigned long id = reset_spec->args[0];
+
+	if (!(BIT(id) & K210_RST_MASK))
+		return -EINVAL;
+
+	return id;
+}
+
+static const struct reset_control_ops k210_rst_ops = {
+	.assert		= k210_rst_assert,
+	.deassert	= k210_rst_deassert,
+	.reset		= k210_rst_reset,
+	.status		= k210_rst_status,
+};
+
+static int k210_rst_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *parent_np = of_get_parent(dev->of_node);
+	struct k210_rst *ksr;
+
+	dev_info(dev, "K210 reset controller\n");
+
+	ksr = devm_kzalloc(dev, sizeof(*ksr), GFP_KERNEL);
+	if (!ksr)
+		return -ENOMEM;
+
+	ksr->map = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
+	if (IS_ERR(ksr->map))
+		return PTR_ERR(ksr->map);
+
+	ksr->rcdev.owner = THIS_MODULE;
+	ksr->rcdev.dev = dev;
+	ksr->rcdev.of_node = dev->of_node;
+	ksr->rcdev.ops = &k210_rst_ops;
+	ksr->rcdev.nr_resets = fls(K210_RST_MASK);
+	ksr->rcdev.of_reset_n_cells = 1;
+	ksr->rcdev.of_xlate = k210_rst_xlate;
+
+	return devm_reset_controller_register(dev, &ksr->rcdev);
+}
+
+static const struct of_device_id k210_rst_dt_ids[] = {
+	{ .compatible = "canaan,k210-rst" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver k210_rst_driver = {
+	.probe	= k210_rst_probe,
+	.driver = {
+		.name		= "k210-rst",
+		.of_match_table	= k210_rst_dt_ids,
+	},
+};
+builtin_platform_driver(k210_rst_driver);

drivers/soc/Kconfig

@@ -6,6 +6,7 @@ source "drivers/soc/amlogic/Kconfig"
 source "drivers/soc/aspeed/Kconfig"
 source "drivers/soc/atmel/Kconfig"
 source "drivers/soc/bcm/Kconfig"
+source "drivers/soc/canaan/Kconfig"
 source "drivers/soc/fsl/Kconfig"
 source "drivers/soc/imx/Kconfig"
 source "drivers/soc/ixp4xx/Kconfig"
@@ -22,6 +23,5 @@ source "drivers/soc/ti/Kconfig"
 source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
 source "drivers/soc/xilinx/Kconfig"
-source "drivers/soc/kendryte/Kconfig"
 
 endmenu

drivers/soc/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
 obj-y				+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
 obj-y				+= bcm/
+obj-$(CONFIG_SOC_CANAAN)	+= canaan/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-y				+= fsl/
@@ -28,4 +29,3 @@ obj-y				+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
 obj-y				+= xilinx/
-obj-$(CONFIG_SOC_KENDRYTE)	+= kendryte/

drivers/soc/canaan/Kconfig

+# SPDX-License-Identifier: GPL-2.0
+
+config SOC_K210_SYSCTL
+	bool "Canaan Kendryte K210 SoC system controller"
+	depends on RISCV && SOC_CANAAN && OF
+	default SOC_CANAAN
+        select PM
+        select SIMPLE_PM_BUS
+        select SYSCON
+        select MFD_SYSCON
+	help
+	  Canaan Kendryte K210 SoC system controller driver.

drivers/soc/kendryte/Makefile → drivers/soc/canaan/Makefile

 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_K210_SYSCTL)	+= k210-sysctl.o
+obj-$(CONFIG_SOC_K210_SYSCTL)	+= k210-sysctl.o

drivers/soc/canaan/k210-sysctl.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Christoph Hellwig.
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ */
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <asm/soc.h>
+
+#include <soc/canaan/k210-sysctl.h>
+
+static int k210_sysctl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk *pclk;
+	int ret;
+
+	dev_info(dev, "K210 system controller\n");
+
+	/* Get power bus clock */
+	pclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pclk))
+		return dev_err_probe(dev, PTR_ERR(pclk),
+				     "Get bus clock failed\n");
+
+	ret = clk_prepare_enable(pclk);
+	if (ret) {
+		dev_err(dev, "Enable bus clock failed\n");
+		return ret;
+	}
+
+	/* Populate children */
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		dev_err(dev, "Populate platform failed %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id k210_sysctl_of_match[] = {
+	{ .compatible = "canaan,k210-sysctl", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver k210_sysctl_driver = {
+	.driver	= {
+		.name		= "k210-sysctl",
+		.of_match_table	= k210_sysctl_of_match,
+	},
+	.probe			= k210_sysctl_probe,
+};
+builtin_platform_driver(k210_sysctl_driver);
+
+/*
+ * System controller registers base address and size.
+ */
+#define K210_SYSCTL_BASE_ADDR	0x50440000ULL
+#define K210_SYSCTL_BASE_SIZE	0x1000
+
+/*
+ * This needs to be called very early during initialization, given that
+ * PLL1 needs to be enabled to be able to use all SRAM.
+ */
+static void __init k210_soc_early_init(const void *fdt)
+{
+	void __iomem *sysctl_base;
+
+	sysctl_base = ioremap(K210_SYSCTL_BASE_ADDR, K210_SYSCTL_BASE_SIZE);
+	if (!sysctl_base)
+		panic("k210-sysctl: ioremap failed");
+
+	k210_clk_early_init(sysctl_base);
+
+	iounmap(sysctl_base);
+}
+SOC_EARLY_INIT_DECLARE(k210_soc, "canaan,kendryte-k210", k210_soc_early_init);

drivers/soc/kendryte/Kconfig

-# SPDX-License-Identifier: GPL-2.0
-
-if SOC_KENDRYTE
-
-config K210_SYSCTL
-	bool "Kendryte K210 system controller"
-	default y
-	depends on RISCV
-	help
-	  Enables controlling the K210 various clocks and to enable
-	  general purpose use of the extra 2MB of SRAM normally
-	  reserved for the AI engine.
-
-endif

drivers/soc/kendryte/k210-sysctl.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2019 Christoph Hellwig.
- * Copyright (c) 2019 Western Digital Corporation or its affiliates.
- */
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/bitfield.h>
-#include <asm/soc.h>
-
-#define K210_SYSCTL_CLK0_FREQ		26000000UL
-
-/* Registers base address */
-#define K210_SYSCTL_SYSCTL_BASE_ADDR	0x50440000ULL
-
-/* Registers */
-#define K210_SYSCTL_PLL0		0x08
-#define K210_SYSCTL_PLL1		0x0c
-/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
-#define   PLL_RESET		(1 << 20)
-#define   PLL_PWR		(1 << 21)
-#define   PLL_INTFB		(1 << 22)
-#define   PLL_BYPASS		(1 << 23)
-#define   PLL_TEST		(1 << 24)
-#define   PLL_OUT_EN		(1 << 25)
-#define   PLL_TEST_EN		(1 << 26)
-#define K210_SYSCTL_PLL_LOCK		0x18
-#define   PLL0_LOCK1		(1 << 0)
-#define   PLL0_LOCK2		(1 << 1)
-#define   PLL0_SLIP_CLEAR	(1 << 2)
-#define   PLL0_TEST_CLK_OUT	(1 << 3)
-#define   PLL1_LOCK1		(1 << 8)
-#define   PLL1_LOCK2		(1 << 9)
-#define   PLL1_SLIP_CLEAR	(1 << 10)
-#define   PLL1_TEST_CLK_OUT	(1 << 11)
-#define   PLL2_LOCK1		(1 << 16)
-#define   PLL2_LOCK2		(1 << 16)
-#define   PLL2_SLIP_CLEAR	(1 << 18)
-#define   PLL2_TEST_CLK_OUT	(1 << 19)
-#define K210_SYSCTL_CLKSEL0	0x20
-#define   CLKSEL_ACLK		(1 << 0)
-#define K210_SYSCTL_CLKEN_CENT		0x28
-#define   CLKEN_CPU		(1 << 0)
-#define   CLKEN_SRAM0		(1 << 1)
-#define   CLKEN_SRAM1		(1 << 2)
-#define   CLKEN_APB0		(1 << 3)
-#define   CLKEN_APB1		(1 << 4)
-#define   CLKEN_APB2		(1 << 5)
-#define K210_SYSCTL_CLKEN_PERI		0x2c
-#define   CLKEN_ROM		(1 << 0)
-#define   CLKEN_DMA		(1 << 1)
-#define   CLKEN_AI		(1 << 2)
-#define   CLKEN_DVP		(1 << 3)
-#define   CLKEN_FFT		(1 << 4)
-#define   CLKEN_GPIO		(1 << 5)
-#define   CLKEN_SPI0		(1 << 6)
-#define   CLKEN_SPI1		(1 << 7)
-#define   CLKEN_SPI2		(1 << 8)
-#define   CLKEN_SPI3		(1 << 9)
-#define   CLKEN_I2S0		(1 << 10)
-#define   CLKEN_I2S1		(1 << 11)
-#define   CLKEN_I2S2		(1 << 12)
-#define   CLKEN_I2C0		(1 << 13)
-#define   CLKEN_I2C1		(1 << 14)
-#define   CLKEN_I2C2		(1 << 15)
-#define   CLKEN_UART1		(1 << 16)
-#define   CLKEN_UART2		(1 << 17)
-#define   CLKEN_UART3		(1 << 18)
-#define   CLKEN_AES		(1 << 19)
-#define   CLKEN_FPIO		(1 << 20)
-#define   CLKEN_TIMER0		(1 << 21)
-#define   CLKEN_TIMER1		(1 << 22)
-#define   CLKEN_TIMER2		(1 << 23)
-#define   CLKEN_WDT0		(1 << 24)
-#define   CLKEN_WDT1		(1 << 25)
-#define   CLKEN_SHA		(1 << 26)
-#define   CLKEN_OTP		(1 << 27)
-#define   CLKEN_RTC		(1 << 29)
-
-struct k210_sysctl {
-	void __iomem		*regs;
-	struct clk_hw		hw;
-};
-
-static void k210_set_bits(u32 val, void __iomem *reg)
-{
-	writel(readl(reg) | val, reg);
-}
-
-static void k210_clear_bits(u32 val, void __iomem *reg)
-{
-	writel(readl(reg) & ~val, reg);
-}
-
-static void k210_pll1_enable(void __iomem *regs)
-{
-	u32 val;
-
-	val = readl(regs + K210_SYSCTL_PLL1);
-	val &= ~GENMASK(19, 0);				/* clkr1 = 0 */
-	val |= FIELD_PREP(GENMASK(9, 4), 0x3B);		/* clkf1 = 59 */
-	val |= FIELD_PREP(GENMASK(13, 10), 0x3);	/* clkod1 = 3 */
-	val |= FIELD_PREP(GENMASK(19, 14), 0x3B);	/* bwadj1 = 59 */
-	writel(val, regs + K210_SYSCTL_PLL1);
-
-	k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1);
-	k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1);
-
-	/*
-	 * Reset the pll. The magic NOPs come from the Kendryte reference SDK.
-	 */
-	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-	k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-	nop();
-	nop();
-	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
-
-	for (;;) {
-		val = readl(regs + K210_SYSCTL_PLL_LOCK);
-		if (val & PLL1_LOCK2)
-			break;
-		writel(val | PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK);
-	}
-
-	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1);
-}
-
-static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
-		unsigned long parent_rate)
-{
-	struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw);
-	u32 clksel0, pll0;
-	u64 pll0_freq, clkr0, clkf0, clkod0;
-
-	/*
-	 * If the clock selector is not set, use the base frequency.
-	 * Otherwise, use PLL0 frequency with a frequency divisor.
-	 */
-	clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0);
-	if (!(clksel0 & CLKSEL_ACLK))
-		return K210_SYSCTL_CLK0_FREQ;
-
-	/*
-	 * Get PLL0 frequency:
-	 * freq = base frequency * clkf0 / (clkr0 * clkod0)
-	 */
-	pll0 = readl(s->regs + K210_SYSCTL_PLL0);
-	clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0);
-	clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0);
-	clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0);
-	pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0);
-
-	/* Get the frequency divisor from the clock selector */
-	return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0));
-}
-
-static const struct clk_ops k210_sysctl_clk_ops = {
-	.recalc_rate	= k210_sysctl_clk_recalc_rate,
-};
-
-static const struct clk_init_data k210_clk_init_data = {
-	.name		= "k210-sysctl-pll1",
-	.ops		= &k210_sysctl_clk_ops,
-};
-
-static int k210_sysctl_probe(struct platform_device *pdev)
-{
-	struct k210_sysctl *s;
-	int error;
-
-	pr_info("Kendryte K210 SoC sysctl\n");
-
-	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	s->regs = devm_ioremap_resource(&pdev->dev,
-			platform_get_resource(pdev, IORESOURCE_MEM, 0));
-	if (IS_ERR(s->regs))
-		return PTR_ERR(s->regs);
-
-	s->hw.init = &k210_clk_init_data;
-	error = devm_clk_hw_register(&pdev->dev, &s->hw);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register clk");
-		return error;
-	}
-
-	error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get,
-					    &s->hw);
-	if (error) {
-		dev_err(&pdev->dev, "adding clk provider failed\n");
-		return error;
-	}
-
-	return 0;
-}
-
-static const struct of_device_id k210_sysctl_of_match[] = {
-	{ .compatible = "kendryte,k210-sysctl", },
-	{}
-};
-
-static struct platform_driver k210_sysctl_driver = {
-	.driver	= {
-		.name		= "k210-sysctl",
-		.of_match_table	= k210_sysctl_of_match,
-	},
-	.probe			= k210_sysctl_probe,
-};
-
-static int __init k210_sysctl_init(void)
-{
-	return platform_driver_register(&k210_sysctl_driver);
-}
-core_initcall(k210_sysctl_init);
-
-/*
- * This needs to be called very early during initialization, given that
- * PLL1 needs to be enabled to be able to use all SRAM.
- */
-static void __init k210_soc_early_init(const void *fdt)
-{
-	void __iomem *regs;
-
-	regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000);
-	if (!regs)
-		panic("K210 sysctl ioremap");
-
-	/* Enable PLL1 to make the KPU SRAM useable */
-	k210_pll1_enable(regs);
-
-	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);
-
-	k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1,
-		      regs + K210_SYSCTL_CLKEN_CENT);
-	k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC,
-		      regs + K210_SYSCTL_CLKEN_PERI);
-
-	k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0);
-
-	iounmap(regs);
-}
-SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);
-
-#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
-/*
- * Generic entry for the default k210.dtb embedded DTB for boards with:
- *   - Vendor ID: 0x4B5
- *   - Arch ID: 0xE59889E6A5A04149 (= "Canaan AI" in UTF-8 encoded Chinese)
- *   - Impl ID:	0x4D41495832303030 (= "MAIX2000")
- * These values are reported by the SiPEED MAXDUINO, SiPEED MAIX GO and
- * SiPEED Dan dock boards.
- */
-SOC_BUILTIN_DTB_DECLARE(k210, 0x4B5, 0xE59889E6A5A04149, 0x4D41495832303030);
-#endif

drivers/soc/sifive/sifive_l2_cache.c

@@ -17,6 +17,10 @@
 #define SIFIVE_L2_DIRECCFIX_HIGH 0x104
 #define SIFIVE_L2_DIRECCFIX_COUNT 0x108
 
+#define SIFIVE_L2_DIRECCFAIL_LOW 0x120
+#define SIFIVE_L2_DIRECCFAIL_HIGH 0x124
+#define SIFIVE_L2_DIRECCFAIL_COUNT 0x128
+
 #define SIFIVE_L2_DATECCFIX_LOW 0x140
 #define SIFIVE_L2_DATECCFIX_HIGH 0x144
 #define SIFIVE_L2_DATECCFIX_COUNT 0x148
@@ -29,7 +33,7 @@
 #define SIFIVE_L2_WAYENABLE 0x08
 #define SIFIVE_L2_ECCINJECTERR 0x40
 
-#define SIFIVE_L2_MAX_ECCINTR 3
+#define SIFIVE_L2_MAX_ECCINTR 4
 
 static void __iomem *l2_base;
 static int g_irq[SIFIVE_L2_MAX_ECCINTR];
@@ -39,6 +43,7 @@ enum {
 	DIR_CORR = 0,
 	DATA_CORR,
 	DATA_UNCORR,
+	DIR_UNCORR,
 };
 
 #ifdef CONFIG_DEBUG_FS
@@ -93,6 +98,7 @@ static void l2_config_read(void)
 
 static const struct of_device_id sifive_l2_ids[] = {
 	{ .compatible = "sifive,fu540-c000-ccache" },
+	{ .compatible = "sifive,fu740-c000-ccache" },
 	{ /* end of table */ },
 };
 
@@ -155,6 +161,15 @@ static irqreturn_t l2_int_handler(int irq, void *device)
 		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
 					   "DirECCFix");
 	}
+	if (irq == g_irq[DIR_UNCORR]) {
+		add_h = readl(l2_base + SIFIVE_L2_DIRECCFAIL_HIGH);
+		add_l = readl(l2_base + SIFIVE_L2_DIRECCFAIL_LOW);
+		/* Reading this register clears the DirFail interrupt sig */
+		readl(l2_base + SIFIVE_L2_DIRECCFAIL_COUNT);
+		atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE,
+					   "DirECCFail");
+		panic("L2CACHE: DirFail @ 0x%08X.%08X\n", add_h, add_l);
+	}
 	if (irq == g_irq[DATA_CORR]) {
 		add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH);
 		add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW);
@@ -181,7 +196,7 @@ static int __init sifive_l2_init(void)
 {
 	struct device_node *np;
 	struct resource res;
-	int i, rc;
+	int i, rc, intr_num;
 
 	np = of_find_matching_node(NULL, sifive_l2_ids);
 	if (!np)
@@ -194,7 +209,13 @@ static int __init sifive_l2_init(void)
 	if (!l2_base)
 		return -ENOMEM;
 
-	for (i = 0; i < SIFIVE_L2_MAX_ECCINTR; i++) {
+	intr_num = of_property_count_u32_elems(np, "interrupts");
+	if (!intr_num) {
+		pr_err("L2CACHE: no interrupts property\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < intr_num; i++) {
 		g_irq[i] = irq_of_parse_and_map(np, i);
 		rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
 		if (rc) {

include/asm-generic/numa.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_GENERIC_NUMA_H
+#define __ASM_GENERIC_NUMA_H
+
+#ifdef CONFIG_NUMA
+
+#define NR_NODE_MEMBLKS		(MAX_NUMNODES * 2)
+
+int __node_distance(int from, int to);
+#define node_distance(a, b) __node_distance(a, b)
+
+extern nodemask_t numa_nodes_parsed __initdata;
+
+extern bool numa_off;
+
+/* Mappings between node number and cpus on that node. */
+extern cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
+void numa_clear_node(unsigned int cpu);
+
+#ifdef CONFIG_DEBUG_PER_CPU_MAPS
+const struct cpumask *cpumask_of_node(int node);
+#else
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+static inline const struct cpumask *cpumask_of_node(int node)
+{
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	return node_to_cpumask_map[node];
+}
+#endif
+
+void __init arch_numa_init(void);
+int __init numa_add_memblk(int nodeid, u64 start, u64 end);
+void __init numa_set_distance(int from, int to, int distance);
+void __init numa_free_distance(void);
+void __init early_map_cpu_to_node(unsigned int cpu, int nid);
+void numa_store_cpu_info(unsigned int cpu);
+void numa_add_cpu(unsigned int cpu);
+void numa_remove_cpu(unsigned int cpu);
+
+#else	/* CONFIG_NUMA */
+
+static inline void numa_store_cpu_info(unsigned int cpu) { }
+static inline void numa_add_cpu(unsigned int cpu) { }
+static inline void numa_remove_cpu(unsigned int cpu) { }
+static inline void arch_numa_init(void) { }
+static inline void early_map_cpu_to_node(unsigned int cpu, int nid) { }
+
+#endif	/* CONFIG_NUMA */
+
+#endif	/* __ASM_GENERIC_NUMA_H */

include/dt-bindings/clock/k210-clk.h

@@ -9,7 +9,6 @@
 /*
  * Kendryte K210 SoC clock identifiers (arbitrary values).
  */
-#define K210_CLK_ACLK	0
 #define K210_CLK_CPU	0
 #define K210_CLK_SRAM0	1
 #define K210_CLK_SRAM1	2

include/dt-bindings/pinctrl/k210-fpioa.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef PINCTRL_K210_FPIOA_H
+#define PINCTRL_K210_FPIOA_H
+
+/*
+ * Full list of FPIOA functions from
+ * kendryte-standalone-sdk/lib/drivers/include/fpioa.h
+ */
+#define K210_PCF_MASK		GENMASK(7, 0)
+#define K210_PCF_JTAG_TCLK	0   /* JTAG Test Clock */
+#define K210_PCF_JTAG_TDI	1   /* JTAG Test Data In */
+#define K210_PCF_JTAG_TMS	2   /* JTAG Test Mode Select */
+#define K210_PCF_JTAG_TDO	3   /* JTAG Test Data Out */
+#define K210_PCF_SPI0_D0	4   /* SPI0 Data 0 */
+#define K210_PCF_SPI0_D1	5   /* SPI0 Data 1 */
+#define K210_PCF_SPI0_D2	6   /* SPI0 Data 2 */
+#define K210_PCF_SPI0_D3	7   /* SPI0 Data 3 */
+#define K210_PCF_SPI0_D4	8   /* SPI0 Data 4 */
+#define K210_PCF_SPI0_D5	9   /* SPI0 Data 5 */
+#define K210_PCF_SPI0_D6	10  /* SPI0 Data 6 */
+#define K210_PCF_SPI0_D7	11  /* SPI0 Data 7 */
+#define K210_PCF_SPI0_SS0	12  /* SPI0 Chip Select 0 */
+#define K210_PCF_SPI0_SS1	13  /* SPI0 Chip Select 1 */
+#define K210_PCF_SPI0_SS2	14  /* SPI0 Chip Select 2 */
+#define K210_PCF_SPI0_SS3	15  /* SPI0 Chip Select 3 */
+#define K210_PCF_SPI0_ARB	16  /* SPI0 Arbitration */
+#define K210_PCF_SPI0_SCLK	17  /* SPI0 Serial Clock */
+#define K210_PCF_UARTHS_RX	18  /* UART High speed Receiver */
+#define K210_PCF_UARTHS_TX	19  /* UART High speed Transmitter */
+#define K210_PCF_RESV6		20  /* Reserved function */
+#define K210_PCF_RESV7		21  /* Reserved function */
+#define K210_PCF_CLK_SPI1	22  /* Clock SPI1 */
+#define K210_PCF_CLK_I2C1	23  /* Clock I2C1 */
+#define K210_PCF_GPIOHS0	24  /* GPIO High speed 0 */
+#define K210_PCF_GPIOHS1	25  /* GPIO High speed 1 */
+#define K210_PCF_GPIOHS2	26  /* GPIO High speed 2 */
+#define K210_PCF_GPIOHS3	27  /* GPIO High speed 3 */
+#define K210_PCF_GPIOHS4	28  /* GPIO High speed 4 */
+#define K210_PCF_GPIOHS5	29  /* GPIO High speed 5 */
+#define K210_PCF_GPIOHS6	30  /* GPIO High speed 6 */
+#define K210_PCF_GPIOHS7	31  /* GPIO High speed 7 */
+#define K210_PCF_GPIOHS8	32  /* GPIO High speed 8 */
+#define K210_PCF_GPIOHS9	33  /* GPIO High speed 9 */
+#define K210_PCF_GPIOHS10	34  /* GPIO High speed 10 */
+#define K210_PCF_GPIOHS11	35  /* GPIO High speed 11 */
+#define K210_PCF_GPIOHS12	36  /* GPIO High speed 12 */
+#define K210_PCF_GPIOHS13	37  /* GPIO High speed 13 */
+#define K210_PCF_GPIOHS14	38  /* GPIO High speed 14 */
+#define K210_PCF_GPIOHS15	39  /* GPIO High speed 15 */
+#define K210_PCF_GPIOHS16	40  /* GPIO High speed 16 */
+#define K210_PCF_GPIOHS17	41  /* GPIO High speed 17 */
+#define K210_PCF_GPIOHS18	42  /* GPIO High speed 18 */
+#define K210_PCF_GPIOHS19	43  /* GPIO High speed 19 */
+#define K210_PCF_GPIOHS20	44  /* GPIO High speed 20 */
+#define K210_PCF_GPIOHS21	45  /* GPIO High speed 21 */
+#define K210_PCF_GPIOHS22	46  /* GPIO High speed 22 */
+#define K210_PCF_GPIOHS23	47  /* GPIO High speed 23 */
+#define K210_PCF_GPIOHS24	48  /* GPIO High speed 24 */
+#define K210_PCF_GPIOHS25	49  /* GPIO High speed 25 */
+#define K210_PCF_GPIOHS26	50  /* GPIO High speed 26 */
+#define K210_PCF_GPIOHS27	51  /* GPIO High speed 27 */
+#define K210_PCF_GPIOHS28	52  /* GPIO High speed 28 */
+#define K210_PCF_GPIOHS29	53  /* GPIO High speed 29 */
+#define K210_PCF_GPIOHS30	54  /* GPIO High speed 30 */
+#define K210_PCF_GPIOHS31	55  /* GPIO High speed 31 */
+#define K210_PCF_GPIO0		56  /* GPIO pin 0 */
+#define K210_PCF_GPIO1		57  /* GPIO pin 1 */
+#define K210_PCF_GPIO2		58  /* GPIO pin 2 */
+#define K210_PCF_GPIO3		59  /* GPIO pin 3 */
+#define K210_PCF_GPIO4		60  /* GPIO pin 4 */
+#define K210_PCF_GPIO5		61  /* GPIO pin 5 */
+#define K210_PCF_GPIO6		62  /* GPIO pin 6 */
+#define K210_PCF_GPIO7		63  /* GPIO pin 7 */
+#define K210_PCF_UART1_RX	64  /* UART1 Receiver */
+#define K210_PCF_UART1_TX	65  /* UART1 Transmitter */
+#define K210_PCF_UART2_RX	66  /* UART2 Receiver */
+#define K210_PCF_UART2_TX	67  /* UART2 Transmitter */
+#define K210_PCF_UART3_RX	68  /* UART3 Receiver */
+#define K210_PCF_UART3_TX	69  /* UART3 Transmitter */
+#define K210_PCF_SPI1_D0	70  /* SPI1 Data 0 */
+#define K210_PCF_SPI1_D1	71  /* SPI1 Data 1 */
+#define K210_PCF_SPI1_D2	72  /* SPI1 Data 2 */
+#define K210_PCF_SPI1_D3	73  /* SPI1 Data 3 */
+#define K210_PCF_SPI1_D4	74  /* SPI1 Data 4 */
+#define K210_PCF_SPI1_D5	75  /* SPI1 Data 5 */
+#define K210_PCF_SPI1_D6	76  /* SPI1 Data 6 */
+#define K210_PCF_SPI1_D7	77  /* SPI1 Data 7 */
+#define K210_PCF_SPI1_SS0	78  /* SPI1 Chip Select 0 */
+#define K210_PCF_SPI1_SS1	79  /* SPI1 Chip Select 1 */
+#define K210_PCF_SPI1_SS2	80  /* SPI1 Chip Select 2 */
+#define K210_PCF_SPI1_SS3	81  /* SPI1 Chip Select 3 */
+#define K210_PCF_SPI1_ARB	82  /* SPI1 Arbitration */
+#define K210_PCF_SPI1_SCLK	83  /* SPI1 Serial Clock */
+#define K210_PCF_SPI2_D0	84  /* SPI2 Data 0 */
+#define K210_PCF_SPI2_SS	85  /* SPI2 Select */
+#define K210_PCF_SPI2_SCLK	86  /* SPI2 Serial Clock */
+#define K210_PCF_I2S0_MCLK	87  /* I2S0 Master Clock */
+#define K210_PCF_I2S0_SCLK	88  /* I2S0 Serial Clock(BCLK) */
+#define K210_PCF_I2S0_WS	89  /* I2S0 Word Select(LRCLK) */
+#define K210_PCF_I2S0_IN_D0	90  /* I2S0 Serial Data Input 0 */
+#define K210_PCF_I2S0_IN_D1	91  /* I2S0 Serial Data Input 1 */
+#define K210_PCF_I2S0_IN_D2	92  /* I2S0 Serial Data Input 2 */
+#define K210_PCF_I2S0_IN_D3	93  /* I2S0 Serial Data Input 3 */
+#define K210_PCF_I2S0_OUT_D0	94  /* I2S0 Serial Data Output 0 */
+#define K210_PCF_I2S0_OUT_D1	95  /* I2S0 Serial Data Output 1 */
+#define K210_PCF_I2S0_OUT_D2	96  /* I2S0 Serial Data Output 2 */
+#define K210_PCF_I2S0_OUT_D3	97  /* I2S0 Serial Data Output 3 */
+#define K210_PCF_I2S1_MCLK	98  /* I2S1 Master Clock */
+#define K210_PCF_I2S1_SCLK	99  /* I2S1 Serial Clock(BCLK) */
+#define K210_PCF_I2S1_WS	100 /* I2S1 Word Select(LRCLK) */
+#define K210_PCF_I2S1_IN_D0	101 /* I2S1 Serial Data Input 0 */
+#define K210_PCF_I2S1_IN_D1	102 /* I2S1 Serial Data Input 1 */
+#define K210_PCF_I2S1_IN_D2	103 /* I2S1 Serial Data Input 2 */
+#define K210_PCF_I2S1_IN_D3	104 /* I2S1 Serial Data Input 3 */
+#define K210_PCF_I2S1_OUT_D0	105 /* I2S1 Serial Data Output 0 */
+#define K210_PCF_I2S1_OUT_D1	106 /* I2S1 Serial Data Output 1 */
+#define K210_PCF_I2S1_OUT_D2	107 /* I2S1 Serial Data Output 2 */
+#define K210_PCF_I2S1_OUT_D3	108 /* I2S1 Serial Data Output 3 */
+#define K210_PCF_I2S2_MCLK	109 /* I2S2 Master Clock */
+#define K210_PCF_I2S2_SCLK	110 /* I2S2 Serial Clock(BCLK) */
+#define K210_PCF_I2S2_WS	111 /* I2S2 Word Select(LRCLK) */
+#define K210_PCF_I2S2_IN_D0	112 /* I2S2 Serial Data Input 0 */
+#define K210_PCF_I2S2_IN_D1	113 /* I2S2 Serial Data Input 1 */
+#define K210_PCF_I2S2_IN_D2	114 /* I2S2 Serial Data Input 2 */
+#define K210_PCF_I2S2_IN_D3	115 /* I2S2 Serial Data Input 3 */
+#define K210_PCF_I2S2_OUT_D0	116 /* I2S2 Serial Data Output 0 */
+#define K210_PCF_I2S2_OUT_D1	117 /* I2S2 Serial Data Output 1 */
+#define K210_PCF_I2S2_OUT_D2	118 /* I2S2 Serial Data Output 2 */
+#define K210_PCF_I2S2_OUT_D3	119 /* I2S2 Serial Data Output 3 */
+#define K210_PCF_RESV0		120 /* Reserved function */
+#define K210_PCF_RESV1		121 /* Reserved function */
+#define K210_PCF_RESV2		122 /* Reserved function */
+#define K210_PCF_RESV3		123 /* Reserved function */
+#define K210_PCF_RESV4		124 /* Reserved function */
+#define K210_PCF_RESV5		125 /* Reserved function */
+#define K210_PCF_I2C0_SCLK	126 /* I2C0 Serial Clock */
+#define K210_PCF_I2C0_SDA	127 /* I2C0 Serial Data */
+#define K210_PCF_I2C1_SCLK	128 /* I2C1 Serial Clock */
+#define K210_PCF_I2C1_SDA	129 /* I2C1 Serial Data */
+#define K210_PCF_I2C2_SCLK	130 /* I2C2 Serial Clock */
+#define K210_PCF_I2C2_SDA	131 /* I2C2 Serial Data */
+#define K210_PCF_DVP_XCLK	132 /* DVP System Clock */
+#define K210_PCF_DVP_RST	133 /* DVP System Reset */
+#define K210_PCF_DVP_PWDN	134 /* DVP Power Down Mode */
+#define K210_PCF_DVP_VSYNC	135 /* DVP Vertical Sync */
+#define K210_PCF_DVP_HSYNC	136 /* DVP Horizontal Sync */
+#define K210_PCF_DVP_PCLK	137 /* Pixel Clock */
+#define K210_PCF_DVP_D0		138 /* Data Bit 0 */
+#define K210_PCF_DVP_D1		139 /* Data Bit 1 */
+#define K210_PCF_DVP_D2		140 /* Data Bit 2 */
+#define K210_PCF_DVP_D3		141 /* Data Bit 3 */
+#define K210_PCF_DVP_D4		142 /* Data Bit 4 */
+#define K210_PCF_DVP_D5		143 /* Data Bit 5 */
+#define K210_PCF_DVP_D6		144 /* Data Bit 6 */
+#define K210_PCF_DVP_D7		145 /* Data Bit 7 */
+#define K210_PCF_SCCB_SCLK	146 /* Serial Camera Control Bus Clock */
+#define K210_PCF_SCCB_SDA	147 /* Serial Camera Control Bus Data */
+#define K210_PCF_UART1_CTS	148 /* UART1 Clear To Send */
+#define K210_PCF_UART1_DSR	149 /* UART1 Data Set Ready */
+#define K210_PCF_UART1_DCD	150 /* UART1 Data Carrier Detect */
+#define K210_PCF_UART1_RI	151 /* UART1 Ring Indicator */
+#define K210_PCF_UART1_SIR_IN	152 /* UART1 Serial Infrared Input */
+#define K210_PCF_UART1_DTR	153 /* UART1 Data Terminal Ready */
+#define K210_PCF_UART1_RTS	154 /* UART1 Request To Send */
+#define K210_PCF_UART1_OUT2	155 /* UART1 User-designated Output 2 */
+#define K210_PCF_UART1_OUT1	156 /* UART1 User-designated Output 1 */
+#define K210_PCF_UART1_SIR_OUT	157 /* UART1 Serial Infrared Output */
+#define K210_PCF_UART1_BAUD	158 /* UART1 Transmit Clock Output */
+#define K210_PCF_UART1_RE	159 /* UART1 Receiver Output Enable */
+#define K210_PCF_UART1_DE	160 /* UART1 Driver Output Enable */
+#define K210_PCF_UART1_RS485_EN	161 /* UART1 RS485 Enable */
+#define K210_PCF_UART2_CTS	162 /* UART2 Clear To Send */
+#define K210_PCF_UART2_DSR	163 /* UART2 Data Set Ready */
+#define K210_PCF_UART2_DCD	164 /* UART2 Data Carrier Detect */
+#define K210_PCF_UART2_RI	165 /* UART2 Ring Indicator */
+#define K210_PCF_UART2_SIR_IN	166 /* UART2 Serial Infrared Input */
+#define K210_PCF_UART2_DTR	167 /* UART2 Data Terminal Ready */
+#define K210_PCF_UART2_RTS	168 /* UART2 Request To Send */
+#define K210_PCF_UART2_OUT2	169 /* UART2 User-designated Output 2 */
+#define K210_PCF_UART2_OUT1	170 /* UART2 User-designated Output 1 */
+#define K210_PCF_UART2_SIR_OUT	171 /* UART2 Serial Infrared Output */
+#define K210_PCF_UART2_BAUD	172 /* UART2 Transmit Clock Output */
+#define K210_PCF_UART2_RE	173 /* UART2 Receiver Output Enable */
+#define K210_PCF_UART2_DE	174 /* UART2 Driver Output Enable */
+#define K210_PCF_UART2_RS485_EN	175 /* UART2 RS485 Enable */
+#define K210_PCF_UART3_CTS	176 /* UART3 Clear To Send */
+#define K210_PCF_UART3_DSR	177 /* UART3 Data Set Ready */
+#define K210_PCF_UART3_DCD	178 /* UART3 Data Carrier Detect */
+#define K210_PCF_UART3_RI	179 /* UART3 Ring Indicator */
+#define K210_PCF_UART3_SIR_IN	180 /* UART3 Serial Infrared Input */
+#define K210_PCF_UART3_DTR	181 /* UART3 Data Terminal Ready */
+#define K210_PCF_UART3_RTS	182 /* UART3 Request To Send */
+#define K210_PCF_UART3_OUT2	183 /* UART3 User-designated Output 2 */
+#define K210_PCF_UART3_OUT1	184 /* UART3 User-designated Output 1 */
+#define K210_PCF_UART3_SIR_OUT	185 /* UART3 Serial Infrared Output */
+#define K210_PCF_UART3_BAUD	186 /* UART3 Transmit Clock Output */
+#define K210_PCF_UART3_RE	187 /* UART3 Receiver Output Enable */
+#define K210_PCF_UART3_DE	188 /* UART3 Driver Output Enable */
+#define K210_PCF_UART3_RS485_EN	189 /* UART3 RS485 Enable */
+#define K210_PCF_TIMER0_TOGGLE1	190 /* TIMER0 Toggle Output 1 */
+#define K210_PCF_TIMER0_TOGGLE2	191 /* TIMER0 Toggle Output 2 */
+#define K210_PCF_TIMER0_TOGGLE3	192 /* TIMER0 Toggle Output 3 */
+#define K210_PCF_TIMER0_TOGGLE4	193 /* TIMER0 Toggle Output 4 */
+#define K210_PCF_TIMER1_TOGGLE1	194 /* TIMER1 Toggle Output 1 */
+#define K210_PCF_TIMER1_TOGGLE2	195 /* TIMER1 Toggle Output 2 */
+#define K210_PCF_TIMER1_TOGGLE3	196 /* TIMER1 Toggle Output 3 */
+#define K210_PCF_TIMER1_TOGGLE4	197 /* TIMER1 Toggle Output 4 */
+#define K210_PCF_TIMER2_TOGGLE1	198 /* TIMER2 Toggle Output 1 */
+#define K210_PCF_TIMER2_TOGGLE2	199 /* TIMER2 Toggle Output 2 */
+#define K210_PCF_TIMER2_TOGGLE3	200 /* TIMER2 Toggle Output 3 */
+#define K210_PCF_TIMER2_TOGGLE4	201 /* TIMER2 Toggle Output 4 */
+#define K210_PCF_CLK_SPI2	202 /* Clock SPI2 */
+#define K210_PCF_CLK_I2C2	203 /* Clock I2C2 */
+#define K210_PCF_INTERNAL0	204 /* Internal function signal 0 */
+#define K210_PCF_INTERNAL1	205 /* Internal function signal 1 */
+#define K210_PCF_INTERNAL2	206 /* Internal function signal 2 */
+#define K210_PCF_INTERNAL3	207 /* Internal function signal 3 */
+#define K210_PCF_INTERNAL4	208 /* Internal function signal 4 */
+#define K210_PCF_INTERNAL5	209 /* Internal function signal 5 */
+#define K210_PCF_INTERNAL6	210 /* Internal function signal 6 */
+#define K210_PCF_INTERNAL7	211 /* Internal function signal 7 */
+#define K210_PCF_INTERNAL8	212 /* Internal function signal 8 */
+#define K210_PCF_INTERNAL9	213 /* Internal function signal 9 */
+#define K210_PCF_INTERNAL10	214 /* Internal function signal 10 */
+#define K210_PCF_INTERNAL11	215 /* Internal function signal 11 */
+#define K210_PCF_INTERNAL12	216 /* Internal function signal 12 */
+#define K210_PCF_INTERNAL13	217 /* Internal function signal 13 */
+#define K210_PCF_INTERNAL14	218 /* Internal function signal 14 */
+#define K210_PCF_INTERNAL15	219 /* Internal function signal 15 */
+#define K210_PCF_INTERNAL16	220 /* Internal function signal 16 */
+#define K210_PCF_INTERNAL17	221 /* Internal function signal 17 */
+#define K210_PCF_CONSTANT	222 /* Constant function */
+#define K210_PCF_INTERNAL18	223 /* Internal function signal 18 */
+#define K210_PCF_DEBUG0		224 /* Debug function 0 */
+#define K210_PCF_DEBUG1		225 /* Debug function 1 */
+#define K210_PCF_DEBUG2		226 /* Debug function 2 */
+#define K210_PCF_DEBUG3		227 /* Debug function 3 */
+#define K210_PCF_DEBUG4		228 /* Debug function 4 */
+#define K210_PCF_DEBUG5		229 /* Debug function 5 */
+#define K210_PCF_DEBUG6		230 /* Debug function 6 */
+#define K210_PCF_DEBUG7		231 /* Debug function 7 */
+#define K210_PCF_DEBUG8		232 /* Debug function 8 */
+#define K210_PCF_DEBUG9		233 /* Debug function 9 */
+#define K210_PCF_DEBUG10	234 /* Debug function 10 */
+#define K210_PCF_DEBUG11	235 /* Debug function 11 */
+#define K210_PCF_DEBUG12	236 /* Debug function 12 */
+#define K210_PCF_DEBUG13	237 /* Debug function 13 */
+#define K210_PCF_DEBUG14	238 /* Debug function 14 */
+#define K210_PCF_DEBUG15	239 /* Debug function 15 */
+#define K210_PCF_DEBUG16	240 /* Debug function 16 */
+#define K210_PCF_DEBUG17	241 /* Debug function 17 */
+#define K210_PCF_DEBUG18	242 /* Debug function 18 */
+#define K210_PCF_DEBUG19	243 /* Debug function 19 */
+#define K210_PCF_DEBUG20	244 /* Debug function 20 */
+#define K210_PCF_DEBUG21	245 /* Debug function 21 */
+#define K210_PCF_DEBUG22	246 /* Debug function 22 */
+#define K210_PCF_DEBUG23	247 /* Debug function 23 */
+#define K210_PCF_DEBUG24	248 /* Debug function 24 */
+#define K210_PCF_DEBUG25	249 /* Debug function 25 */
+#define K210_PCF_DEBUG26	250 /* Debug function 26 */
+#define K210_PCF_DEBUG27	251 /* Debug function 27 */
+#define K210_PCF_DEBUG28	252 /* Debug function 28 */
+#define K210_PCF_DEBUG29	253 /* Debug function 29 */
+#define K210_PCF_DEBUG30	254 /* Debug function 30 */
+#define K210_PCF_DEBUG31	255 /* Debug function 31 */
+
+#define K210_FPIOA(pin, func)		(((pin) << 16) | (func))
+
+#define K210_PC_POWER_3V3	0
+#define K210_PC_POWER_1V8	1
+
+#endif /* PINCTRL_K210_FPIOA_H */

include/dt-bindings/reset/k210-rst.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef RESET_K210_SYSCTL_H
+#define RESET_K210_SYSCTL_H
+
+/*
+ * Kendryte K210 SoC system controller K210_SYSCTL_SOFT_RESET register bits.
+ * Taken from Kendryte SDK (kendryte-standalone-sdk).
+ */
+#define K210_RST_ROM	0
+#define K210_RST_DMA	1
+#define K210_RST_AI	2
+#define K210_RST_DVP	3
+#define K210_RST_FFT	4
+#define K210_RST_GPIO	5
+#define K210_RST_SPI0	6
+#define K210_RST_SPI1	7
+#define K210_RST_SPI2	8
+#define K210_RST_SPI3	9
+#define K210_RST_I2S0	10
+#define K210_RST_I2S1	11
+#define K210_RST_I2S2	12
+#define K210_RST_I2C0	13
+#define K210_RST_I2C1	14
+#define K210_RST_I2C2	15
+#define K210_RST_UART1	16
+#define K210_RST_UART2	17
+#define K210_RST_UART3	18
+#define K210_RST_AES	19
+#define K210_RST_FPIOA	20
+#define K210_RST_TIMER0	21
+#define K210_RST_TIMER1	22
+#define K210_RST_TIMER2	23
+#define K210_RST_WDT0	24
+#define K210_RST_WDT1	25
+#define K210_RST_SHA	26
+#define K210_RST_RTC	29
+
+#endif /* RESET_K210_SYSCTL_H */

include/linux/initrd.h

 /* SPDX-License-Identifier: GPL-2.0 */
 
+#ifndef __LINUX_INITRD_H
+#define __LINUX_INITRD_H
+
 #define INITRD_MINOR 250 /* shouldn't collide with /dev/ram* too soon ... */
 
 /* starting block # of image */
@@ -15,6 +18,12 @@ extern int initrd_below_start_ok;
 extern unsigned long initrd_start, initrd_end;
 extern void free_initrd_mem(unsigned long, unsigned long);
 
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void __init reserve_initrd_mem(void);
+#else
+static inline void __init reserve_initrd_mem(void) {}
+#endif
+
 extern phys_addr_t phys_initrd_start;
 extern unsigned long phys_initrd_size;
 
@@ -24,3 +33,5 @@ extern char __initramfs_start[];
 extern unsigned long __initramfs_size;
 
 void console_on_rootfs(void);
+
+#endif /* __LINUX_INITRD_H */

include/soc/canaan/k210-sysctl.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef K210_SYSCTL_H
+#define K210_SYSCTL_H
+
+/*
+ * Kendryte K210 SoC system controller registers offsets.
+ * Taken from Kendryte SDK (kendryte-standalone-sdk).
+ */
+#define K210_SYSCTL_GIT_ID	0x00 /* Git short commit id */
+#define K210_SYSCTL_UART_BAUD	0x04 /* Default UARTHS baud rate */
+#define K210_SYSCTL_PLL0	0x08 /* PLL0 controller */
+#define K210_SYSCTL_PLL1	0x0C /* PLL1 controller */
+#define K210_SYSCTL_PLL2	0x10 /* PLL2 controller */
+#define K210_SYSCTL_PLL_LOCK	0x18 /* PLL lock tester */
+#define K210_SYSCTL_ROM_ERROR	0x1C /* AXI ROM detector */
+#define K210_SYSCTL_SEL0	0x20 /* Clock select controller 0 */
+#define K210_SYSCTL_SEL1	0x24 /* Clock select controller 1 */
+#define K210_SYSCTL_EN_CENT	0x28 /* Central clock enable */
+#define K210_SYSCTL_EN_PERI	0x2C /* Peripheral clock enable */
+#define K210_SYSCTL_SOFT_RESET	0x30 /* Soft reset ctrl */
+#define K210_SYSCTL_PERI_RESET	0x34 /* Peripheral reset controller */
+#define K210_SYSCTL_THR0	0x38 /* Clock threshold controller 0 */
+#define K210_SYSCTL_THR1	0x3C /* Clock threshold controller 1 */
+#define K210_SYSCTL_THR2	0x40 /* Clock threshold controller 2 */
+#define K210_SYSCTL_THR3	0x44 /* Clock threshold controller 3 */
+#define K210_SYSCTL_THR4	0x48 /* Clock threshold controller 4 */
+#define K210_SYSCTL_THR5	0x4C /* Clock threshold controller 5 */
+#define K210_SYSCTL_THR6	0x50 /* Clock threshold controller 6 */
+#define K210_SYSCTL_MISC	0x54 /* Miscellaneous controller */
+#define K210_SYSCTL_PERI	0x58 /* Peripheral controller */
+#define K210_SYSCTL_SPI_SLEEP	0x5C /* SPI sleep controller */
+#define K210_SYSCTL_RESET_STAT	0x60 /* Reset source status */
+#define K210_SYSCTL_DMA_SEL0	0x64 /* DMA handshake selector 0 */
+#define K210_SYSCTL_DMA_SEL1	0x68 /* DMA handshake selector 1 */
+#define K210_SYSCTL_POWER_SEL	0x6C /* IO Power Mode Select controller */
+
+void k210_clk_early_init(void __iomem *regs);
+
+#endif

init/initramfs.c

@@ -546,6 +546,51 @@ extern unsigned long __initramfs_size;
 #include <linux/initrd.h>
 #include <linux/kexec.h>
 
+void __init reserve_initrd_mem(void)
+{
+	phys_addr_t start;
+	unsigned long size;
+
+	/* Ignore the virtul address computed during device tree parsing */
+	initrd_start = initrd_end = 0;
+
+	if (!phys_initrd_size)
+		return;
+	/*
+	 * Round the memory region to page boundaries as per free_initrd_mem()
+	 * This allows us to detect whether the pages overlapping the initrd
+	 * are in use, but more importantly, reserves the entire set of pages
+	 * as we don't want these pages allocated for other purposes.
+	 */
+	start = round_down(phys_initrd_start, PAGE_SIZE);
+	size = phys_initrd_size + (phys_initrd_start - start);
+	size = round_up(size, PAGE_SIZE);
+
+	if (!memblock_is_region_memory(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region",
+		       (u64)start, size);
+		goto disable;
+	}
+
+	if (memblock_is_region_reserved(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n",
+		       (u64)start, size);
+		goto disable;
+	}
+
+	memblock_reserve(start, size);
+	/* Now convert initrd to virtual addresses */
+	initrd_start = (unsigned long)__va(phys_initrd_start);
+	initrd_end = initrd_start + phys_initrd_size;
+	initrd_below_start_ok = 1;
+
+	return;
+disable:
+	pr_cont(" - disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+}
+
 void __weak __init free_initrd_mem(unsigned long start, unsigned long end)
 {
 #ifdef CONFIG_ARCH_KEEP_MEMBLOCK