cxgb4: Add VF Link state support

Use ndo_set_vf_link_state to control the link states associated
with the virtual interfaces.
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/chelsio/cxgb4/cxgb4.h

@@ -885,6 +885,7 @@ struct vf_info {
 	unsigned int tx_rate;
 	bool pf_set_mac;
 	u16 vlan;
+	int link_state;
 };
 
 enum {

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -2740,6 +2740,7 @@ static int cxgb4_mgmt_get_vf_config(struct net_device *dev,
 	ivi->min_tx_rate = 0;
 	ether_addr_copy(ivi->mac, vfinfo->vf_mac_addr);
 	ivi->vlan = vfinfo->vlan;
+	ivi->linkstate = vfinfo->link_state;
 	return 0;
 }
 
@@ -2879,6 +2880,49 @@ static int cxgb4_mgmt_set_vf_vlan(struct net_device *dev, int vf,
 		ret, (vlan ? "setting" : "clearing"), adap->pf, vf);
 	return ret;
 }
+
+static int cxgb4_mgmt_set_vf_link_state(struct net_device *dev, int vf,
+					int link)
+{
+	struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = pi->adapter;
+	u32 param, val;
+	int ret = 0;
+
+	if (vf >= adap->num_vfs)
+		return -EINVAL;
+
+	switch (link) {
+	case IFLA_VF_LINK_STATE_AUTO:
+		val = FW_VF_LINK_STATE_AUTO;
+		break;
+
+	case IFLA_VF_LINK_STATE_ENABLE:
+		val = FW_VF_LINK_STATE_ENABLE;
+		break;
+
+	case IFLA_VF_LINK_STATE_DISABLE:
+		val = FW_VF_LINK_STATE_DISABLE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
+		 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_LINK_STATE));
+	ret = t4_set_params(adap, adap->mbox, adap->pf, vf + 1, 1,
+			    &param, &val);
+	if (ret) {
+		dev_err(adap->pdev_dev,
+			"Error %d in setting PF %d VF %d link state\n",
+			ret, adap->pf, vf);
+		return -EINVAL;
+	}
+
+	adap->vfinfo[vf].link_state = link;
+	return ret;
+}
 #endif /* CONFIG_PCI_IOV */
 
 static int cxgb_set_mac_addr(struct net_device *dev, void *p)
@@ -3300,6 +3344,7 @@ static const struct net_device_ops cxgb4_mgmt_netdev_ops = {
 	.ndo_set_vf_rate        = cxgb4_mgmt_set_vf_rate,
 	.ndo_get_phys_port_id   = cxgb4_mgmt_get_phys_port_id,
 	.ndo_set_vf_vlan        = cxgb4_mgmt_set_vf_vlan,
+	.ndo_set_vf_link_state	= cxgb4_mgmt_set_vf_link_state,
 };
 #endif
 

drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h

@@ -1312,6 +1312,14 @@ enum fw_params_param_pfvf {
 	FW_PARAMS_PARAM_PFVF_RAWF_END = 0x37,
 	FW_PARAMS_PARAM_PFVF_NCRYPTO_LOOKASIDE = 0x39,
 	FW_PARAMS_PARAM_PFVF_PORT_CAPS32 = 0x3A,
+	FW_PARAMS_PARAM_PFVF_LINK_STATE = 0x40,
+};
+
+/* Virtual link state as seen by the specified VF */
+enum vf_link_states {
+	FW_VF_LINK_STATE_AUTO		= 0x00,
+	FW_VF_LINK_STATE_ENABLE		= 0x01,
+	FW_VF_LINK_STATE_DISABLE	= 0x02,
 };
 
 /*