Commit 8ba8560d authored by Geert Uytterhoeven's avatar Geert Uytterhoeven

arm64: dts: renesas: r8a779f0: Add GPIO nodes

Add device nodes for the General Purpose Input/Output (GPIO) blocks on
the Renesas R-Car S4-8 (R8A779F0) SoC.

Note that GPIO blocks 4-7 are not added, as they can only be accessed
from the Control Domain.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7fb68561026fa8bb5d9baf0596560c5c719a38cc.1649086225.git.geert+renesas@glider.be
parent 6494e4f9
......@@ -76,6 +76,66 @@ pfc: pinctrl@e6050000 {
<0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
};
gpio0: gpio@e6050180 {
compatible = "renesas,gpio-r8a779f0",
"renesas,rcar-gen4-gpio";
reg = <0 0xe6050180 0 0x54>;
interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 0 21>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@e6050980 {
compatible = "renesas,gpio-r8a779f0",
"renesas,rcar-gen4-gpio";
reg = <0 0xe6050980 0 0x54>;
interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 32 25>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@e6051180 {
compatible = "renesas,gpio-r8a779f0",
"renesas,rcar-gen4-gpio";
reg = <0 0xe6051180 0 0x54>;
interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 64 17>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@e6051980 {
compatible = "renesas,gpio-r8a779f0",
"renesas,rcar-gen4-gpio";
reg = <0 0xe6051980 0 0x54>;
interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 915>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 915>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pfc 0 96 19>;
interrupt-controller;
#interrupt-cells = <2>;
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779f0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment