libata: bump versions

Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/ahci.c

@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ahci"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 
 enum {

drivers/ata/ata_generic.c

@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.2.12"
 
 /*
  *	A generic parallel ATA driver using libata

drivers/ata/libata-core.c

@@ -59,7 +59,7 @@
 
 #include "libata.h"
 
-#define DRV_VERSION	"2.20"	/* must be exactly four chars */
+#define DRV_VERSION	"2.21"	/* must be exactly four chars */
 
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */

drivers/ata/pata_artop.c

@@ -28,7 +28,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_artop"
-#define DRV_VERSION	"0.4.2"
+#define DRV_VERSION	"0.4.3"
 
 /*
  *	The ARTOP has 33 Mhz and "over clocked" timing tables. Until we

drivers/ata/pata_cmd64x.c

@@ -31,7 +31,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 
 /*
  * CMD64x specific registers definition.

drivers/ata/pata_cs5520.c

@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_cs5520"
-#define DRV_VERSION	"0.6.4"
+#define DRV_VERSION	"0.6.5"
 
 struct pio_clocks
 {

drivers/ata/pata_cs5530.c

@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"pata_cs5530"
-#define DRV_VERSION	"0.7.2"
+#define DRV_VERSION	"0.7.3"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {

drivers/ata/pata_cs5535.c

@@ -39,7 +39,7 @@
 #include <asm/msr.h>
 
 #define DRV_NAME	"cs5535"
-#define DRV_VERSION	"0.2.11"
+#define DRV_VERSION	"0.2.12"
 
 /*
  *	The Geode (Aka Athlon GX now) uses an internal MSR based

drivers/ata/pata_cypress.c

@@ -18,7 +18,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cypress"
-#define DRV_VERSION "0.1.4"
+#define DRV_VERSION "0.1.5"
 
 /* here are the offset definitions for the registers */
 

drivers/ata/pata_hpt3x3.c

@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x3"
-#define DRV_VERSION	"0.4.2"
+#define DRV_VERSION	"0.4.3"
 
 /**
  *	hpt3x3_set_piomode		-	PIO setup

drivers/ata/pata_isapnp.c

@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
 
 static struct scsi_host_template isapnp_sht = {
 	.module			= THIS_MODULE,

drivers/ata/pata_it8213.c

@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_it8213"
-#define DRV_VERSION	"0.0.2"
+#define DRV_VERSION	"0.0.3"
 
 /**
  *	it8213_pre_reset	-	check for 40/80 pin

drivers/ata/pata_ixp4xx_cf.c

@@ -23,7 +23,7 @@
 #include <scsi/scsi_host.h>
 
 #define DRV_NAME	"pata_ixp4xx_cf"
-#define DRV_VERSION	"0.1.2"
+#define DRV_VERSION	"0.1.3"
 
 static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {

drivers/ata/pata_jmicron.c

@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_jmicron"
-#define DRV_VERSION	"0.1.4"
+#define DRV_VERSION	"0.1.5"
 
 typedef enum {
 	PORT_PATA0 = 0,

drivers/ata/pata_legacy.c

@@ -64,7 +64,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.4"
+#define DRV_VERSION "0.5.5"
 
 #define NR_HOST 6
 

drivers/ata/pata_platform.c

@@ -22,7 +22,7 @@
 #include <linux/pata_platform.h>
 
 #define DRV_NAME "pata_platform"
-#define DRV_VERSION "0.1.2"
+#define DRV_VERSION "1.0"
 
 static int pio_mask = 1;
 

drivers/ata/pata_qdi.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 
 #define NR_HOST 4	/* Two 6580s */
 

drivers/ata/pata_rz1000.c

@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_rz1000"
-#define DRV_VERSION	"0.2.3"
+#define DRV_VERSION	"0.2.4"
 
 
 /**

drivers/ata/pata_sc1200.c

@@ -40,7 +40,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sc1200"
-#define DRV_VERSION	"0.2.4"
+#define DRV_VERSION	"0.2.5"
 
 #define SC1200_REV_A	0x00
 #define SC1200_REV_B1	0x01

drivers/ata/pata_scc.c

@@ -43,7 +43,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME		"pata_scc"
-#define DRV_VERSION		"0.1"
+#define DRV_VERSION		"0.2"
 
 #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA		0x01b4
 

drivers/ata/pata_serverworks.c

@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.1"
 
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */

drivers/ata/pata_sl82c105.c

@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.3.0"
+#define DRV_VERSION "0.3.1"
 
 enum {
 	/*

drivers/ata/pata_winbond.c

@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.2"
+#define DRV_VERSION "0.0.3"
 
 #define NR_HOST 4	/* Two winbond controllers, two channels each */
 

drivers/ata/pdc_adma.c

@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pdc_adma"
-#define DRV_VERSION	"0.05"
+#define DRV_VERSION	"0.06"
 
 /* macro to calculate base address for ATA regs */
 #define ADMA_ATA_REGS(base,port_no)	((base) + ((port_no) * 0x40))

drivers/ata/sata_inic162x.c

@@ -28,7 +28,7 @@
 #include <scsi/scsi_device.h>
 
 #define DRV_NAME	"sata_inic162x"
-#define DRV_VERSION	"0.1"
+#define DRV_VERSION	"0.2"
 
 enum {
 	MMIO_BAR		= 5,

drivers/ata/sata_mv.c

@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.8"
+#define DRV_VERSION	"0.81"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */

drivers/ata/sata_nv.c

@@ -49,7 +49,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME			"sata_nv"
-#define DRV_VERSION			"3.3"
+#define DRV_VERSION			"3.4"
 
 #define NV_ADMA_DMA_BOUNDARY		0xffffffffUL
 

drivers/ata/sata_qstor.c

@@ -39,7 +39,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_qstor"
-#define DRV_VERSION	"0.07"
+#define DRV_VERSION	"0.08"
 
 enum {
 	QS_MMIO_BAR		= 4,

drivers/ata/sata_sil24.c

@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.8"
+#define DRV_VERSION	"0.9"
 
 /*
  * Port request block (PRB) 32 bytes

drivers/ata/sata_sis.c

@@ -43,7 +43,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"sata_sis"
-#define DRV_VERSION	"0.7"
+#define DRV_VERSION	"0.8"
 
 enum {
 	sis_180			= 0,

drivers/ata/sata_svw.c

@@ -53,7 +53,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 enum {
 	/* ap->flags bits */

drivers/ata/sata_sx4.c

@@ -44,7 +44,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_sx4"
-#define DRV_VERSION	"0.10"
+#define DRV_VERSION	"0.11"
 
 
 enum {

drivers/ata/sata_uli.c

@@ -36,7 +36,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"1.1"
+#define DRV_VERSION	"1.2"
 
 enum {
 	uli_5289		= 0,

drivers/ata/sata_via.c

@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 enum board_ids_enum {
 	vt6420,

drivers/ata/sata_vsc.c

@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.1"
+#define DRV_VERSION	"2.2"
 
 enum {
 	VSC_MMIO_BAR			= 0,